Electrolyte-less design of PEC cells for solar fuels: Prospects and open issues in the development of cells and related catalytic electrodes

Catalysis for e-Chemistry: Need and Gaps for a Future De-Fossilized Chemical Production, with Focus on the Role of Complex (Direct) Syntheses by Electrocatalysis

The prospects, needs and limits in current approaches in catalysis to accelerate the transition to e-chemistry, where this term indicates a fossil fuel-free chemical production, are discussed. It is suggested that e-chemistry is a necessary element of the transformation to meet the targets of net zero emissions by year 2050 and that this conversion from the current petrochemistry is feasible. However, the acceleration of the development of catalytic technologies based on the use of renewable energy sources (indicated as reactive catalysis) is necessary, evidencing that these are part of a system of changes and thus should be assessed from this perspective. However, it is perceived that the current studies in the area are not properly addressing the needs to develop the catalytic technologies required for e-chemistry, presenting a series of relevant aspects and directions in which research should be focused to develop the framework system transformation necessary to implement e-chemistry.

Photo-assisted electrochemical CO2 reduction using a translucent thin film electrode

Herein, we introduce a new concept of photo-assisted electrochemical CO₂ reduction through a translucent thin film electrode. The light-compatible thin film electrode directly exposes Au nanoparticle-loaded Ag nanowires to gaseous CO₂, obtaining a CO production rate of 0.7 mmol cm^-2 h^-1 with a photocurrent density of 6.05 mA cm^-2 at -1.1 V_RHE.

Noble-Metal-Free Multicomponent Nanointegration for Sustainable Energy Conversion

Global energy and environmental crises are among the most pressing challenges facing humankind. To overcome these challenges, recent years have seen an upsurge of interest in the development and production of renewable chemical fuels as alternatives to the nonrenewable and high-polluting fossil fuels. Photocatalysis, photoelectrocatalysis, and electrocatalysis provide promising avenues for sustainable energy conversion. Single- and dual-component catalytic systems based on nanomaterials have been intensively studied for decades, but their intrinsic weaknesses hamper their practical applications. Multicomponent nanomaterial-based systems, consisting of three or more components with at least one component in the nanoscale, have recently emerged. The multiple components are integrated together to create synergistic effects and hence overcome the limitation for outperformance. Such higher-efficiency systems based on nanomaterials will potentially bring an additional benefit in balance-of-system costs if they exclude the use of noble metals, considering the expense and sustainability. It is therefore timely to review the research in this field, providing guidance in the development of noble-metal-free multicomponent nanointegration for sustainable energy conversion. In this work, we first recall the fundamentals of catalysis by nanomaterials, multicomponent nanointegration, and reactor configuration for water splitting, CO₂ reduction, and N₂ reduction. We then systematically review and discuss recent advances in multicomponent-based photocatalytic, photoelectrochemical, and electrochemical systems based on nanomaterials. On the basis of these systems, we further laterally evaluate different multicomponent integration strategies and highlight their impacts on catalytic activity, performance stability, and product selectivity. Finally, we provide conclusions and future prospects for multicomponent nanointegration. This work offers comprehensive insights into the development of cost-competitive multicomponent nanomaterial-based systems for sustainable energy-conversion technologies and assists researchers working toward addressing the global challenges in energy and the environment.

Microbial biofilm ecology, in silico study of quorum sensing receptor-ligand interactions and biofilm mediated bioremediation

Biofilms are structured microbial communities of single or multiple populations in which microbial cells adhere to a surface and get embedded in extracellular polymeric substances (EPS). This review attempts to explain biofilm architecture, development phases, and forces that drive bacteria to promote biofilm mode of growth. Bacterial chemical communication, also known as Quorum sensing (QS), which involves the production, detection, and response to small molecules called autoinducers, is highlighted. The review also provides a brief outline of interspecies and intraspecies cell-cell communication. Additionally, we have performed docking studies using Discovery Studio 4.0, which has enabled our understanding of the prominent interactions between autoinducers and their receptors in different bacterial species while also scoring their interaction energies. Receptors, such as LuxN (Phosphoreceiver domain and RecA domain), LuxP, and LuxR, interacted with their ligands (AI-1, AI-2, and AHL) with a CDocker interaction energy of - 31.6083 kcal/mole; - 34.5821 kcal/mole, - 48.2226 kcal/mole and - 41.5885 kcal/mole, respectively. Since biofilms are ideal for the remediation of contaminants due to their high microbial biomass and their potential to immobilize pollutants, this article also provides an overview of biofilm-mediated bioremediation.

CO2 Reduction of Hybrid Cu2 O-Cu/Gas Diffusion Layer Electrodes and their Integration in a Cu-based Photoelectrocatalytic Cell

Cu₂ O/gas diffusion layer (GDL) electrodes prepared by electrodeposition were studied for the electrocatalytic reduction of CO₂ . The designed electrode was also tested in solar-light-induced CO₂ conversion in combination with a CuO/NtTiO₂ photoanode using a compact photoelectrocatalytic (PEC) cell. Both PEC cell electrodes were prepared using non-critical raw materials and low cost, easily scalable procedures. In the PEC experiments, a total carbon faradaic selectivity of about 90 % to formate and about 75 % to acetate was obtained after 24 h of operations without application of potential/current or using sacrificial agents. In electrocatalytic tests of CO₂ reduction at -1.5 V, the same electrode yielded high total faradaic selectivity (>95 %) but formed selectively formate (about 80 % selectivity) rather than acetate. The in situ transformation of the Cu₂ O/GDL electrode leads to the formation of a hybrid Cu₂ O-Cu/GDL system. Cyclic voltammetry data indicate that the potential and the presence of CO₂ (not only of HCO₃ ^- species) are both important elements in this transformation. Data also indicate that the surface concentration of CO₂ (or of its products of transformation) on the electrode is an important factor to determine performance in the conversion of CO₂ .

2D Oxide Nanomaterials to Address the Energy Transition and Catalysis

2D oxide nanomaterials constitute a broad range of materials, with a wide array of current and potential applications, particularly in the fields of energy storage and catalysis for sustainable energy production. Despite the many similarities in structure, composition, and synthetic methods and uses, the current literature on layered oxides is diverse and disconnected. A number of reviews can be found in the literature, but they are mostly focused on one of the particular subclasses of 2D oxides. This review attempts to bridge the knowledge gap between individual layered oxide types by summarizing recent developments in all important 2D oxide systems including supported ultrathin oxide films, layered clays and double hydroxides, layered perovskites, and novel 2D-zeolite-based materials. Particular attention is paid to the underlying similarities and differences between the various materials, and the subsequent challenges faced by each research community. The potential of layered oxides toward future applications is critically evaluated, especially in the areas of electrocatalysis and photocatalysis, biomass conversion, and fine chemical synthesis. Attention is also paid to corresponding novel 3D materials that can be obtained via sophisticated engineering of 2D oxides.

CuAg@Ag Core-Shell Nanostructure Encapsulated by N-Doped Graphene as a High-Performance Catalyst for Oxygen Reduction Reaction

Development of a robust, cost-effective, and efficient catalyst is extremely necessary for oxygen reduction reaction (ORR) in fuel cell applications. Herein, we reported a well-defined nanostructured catalyst of highly dispersed CuAg@Ag core-shell nanoparticle (NP)-encapsulated nitrogen-doped graphene nanosheets (CuAg@Ag/N-GNS) exhibiting a superior catalytic activity toward ORR in alkaline medium. The synergistic effects produced from the unique properties of CuAg@Ag core-shell NPs and N-GNS made such a novel nanohybrid display a catalytic behavior comparable to that of the commercial Pt/C product. In particular, it demonstrated a much better stability and methanol tolerance than Pt/C under the same conditions. Because of its outstanding electrochemical performance and ease of synthesis, CuAg@Ag/N-GNS material was expected to be a promising low-cost catalyst for ORR in alkaline fuel cell applications.

Beyond Solar Fuels: Renewable Energy-Driven Chemistry

The future feasibility of decarbonized industrial chemical production based on the substitution of fossil feedstocks (FFs) with renewable energy (RE) sources is discussed. Indeed, the use of FFs as an energy source has the greatest impact on the greenhouse gas emissions of chemical production. This future scenario is indicated as "solar-driven" or "RE-driven" chemistry. Its possible implementation requires to go beyond the concept of solar fuels, in particular to address two key aspects: i) the use of RE-driven processes for the production of base raw materials, such as olefins, methanol, and ammonia, and ii) the development of novel RE-driven routes that simultaneously realize process and energy intensification, particularly in the direction of a significant reduction of the number of the process steps.

Enhanced formation of >C1 Products in Electroreduction of CO2 by Adding a CO2 Adsorption Component to a Gas-Diffusion Layer-Type Catalytic Electrode

The addition of a CO₂ -adsorption component (substituted imidazolate-based SIM-1 crystals) to a gas-diffusion layer-type catalytic electrode enhances the activity and especially the selectivity towards >C1 carbon chain products (ethanol, acetone, and isopropanol) of a Pt-based electrocatalyst that is not able to form products of CO₂ reduction involving C-C bond formation under conventional (liquid-phase) conditions. This indicates that the increase of the effective CO₂ concentration at the electrode active surface is the factor controlling the formation of >C1 products rather than only the intrinsic properties of the electrocatalyst.

Grand challenges for catalysis in the Science and Technology Roadmap on Catalysis for Europe: moving ahead for a sustainable future

This perspective discusses the general concepts that will guide future catalysis and related grand challenges based on the Science and Technology Roadmap on Catalysis for Europe prepared by the European Cluster on Catalysis.

Electrocatalytic conversion of CO2 to produce solar fuels in electrolyte or electrolyte-less configurations of PEC cells

The electrocatalytic reduction of CO2 is studied on a series of electrodes (based on Cu, Co, Fe and Pt metal nanoparticles deposited on carbon nanotubes or carbon black and then placed at the interface between a Nafion membrane and a gas-diffusion-layer electrode) on two types of cells: one operating in the presence of a liquid bulk electrolyte and the other in the absence of the electrolyte (electrolyte-less conditions). The results evidence how the latter conditions allow productivity of about one order of magnitude higher and how to change the type of products formed. Under electrolyte-less conditions, the formation of >C2 products such as acetone and isopropanol is observed, but not in liquid-phase cell operations on the same electrodes. The relative order of productivity in CO2 electrocatalytic reduction in the series of electrodes investigated is also different between the two types of cells. The implications of these results in terms of possible differences in the reaction mechanism are commented on, as well as in terms of the design of photoelectrocatalytic (PEC) solar cells.

Turning Perspective in Photoelectrocatalytic Cells for Solar Fuels

The development of new devices for the use and storage of solar energy is a key step to enable a new sustainable energy scenario. The route for direct solar-to-chemical energy transformation, especially to produce liquid fuels, represents a necessary element to realize transition from the actual energy infrastructure. Photoelectrocatalytic (PECa) devices for the production of solar fuels are a key element to enable this sustainable scenario. The development of PECa devices and related materials is of increasing scientific and applied interest. This concept paper introduces the need to turn the viewpoint of research in terms of PECa cell design and related materials with respect to mainstream activities in the field of artificial photosynthesis and leaves. As an example of a new possible direction, the concept of electrolyte-less cell design for PECa cells to produce solar fuels by reduction of CO2 is presented. The fundamental and applied development of new materials and electrodes for these cells should proceed fully integrated with PECa cell design and systematic analysis. A new possible approach to develop semiconductors with improved performances by using visible light is also shortly presented.

Electrochemical behaviour of naked sub-nanometre sized copper clusters and effect of CO2

In size-controlled naked Cu₅ and Cu₂₀ nanoclusters the latter show anodic redox processes occurring at much lower potential with respect to Cu₅, but the latter coordinate effectively CO₂ and allow to reduce CO₂ under cathodic conditions at lower overpotential.