Preparation of magnetically recyclable MIL-53(Al)@SiO2@Fe3O4 catalysts and their catalytic performance for Friedel–Crafts acylation reaction

Bifunctional Tb(III)-modified Ce-MOF nanoprobe for colorimetric and fluorescence sensing of α-glucosidase activity

α-Glucosidase, which directly involves in the metabolism of starch and glycogen and causes an increase in blood sugar level, is the major target enzyme for the precaution and therapy of type II diabetes. Based on the previous work, we adopted a post-synthetic modification method to encapsulate Tb3+ into Ce-MOF nanozyme which owned mixed valence states. Tb@Ce-MOF displayed induced luminescence characteristic and exceptional oxidase-like activity that could oxidize colorless 3,3',5,5'-tetramethylbenzidine (TMB) to blue ox-TMB. α-Glucosidase can hydrolyze the substrate l-ascorbic acid-2-O-α-d-glucopyranosyl (AAG) to generate ascorbic acid (AA), which could increase the Ce3+/Ce4+ redox valence mode in Tb@Ce-MOF, leading to the inhibition of the allochroic reaction of TMB and the decreased absorption of ox-TMB at 652 nm. The energy transfer (EnT) process from Ce3+ to Tb3+ will enhance due to the increased Ce3+/Ce4+ mode in Tb@Ce-MOF, which will result in an enhanced fluorescence signal of Tb@Ce-MOF at 550 nm. But the addition of inhibitor acarbose will inhibit the above process. We have constructed a dual-mode detection platform of α-glucosidase and its inhibitor via colorimetric and fluorometric method. The linear range of α-glucosidase were 0.01-0.5 U/mL (colorimetric mode) and 0.8-1.5 U/mL (fluorometric mode), respectively, with a detection limit as low as 0.0018 U/mL. Furthermore, our approach was also successfully employed to the analysis of α-glucosidase in serum samples.

Rapid magnetization and removal of microplastics from environment and food based on magnetic metal-organic framework Fe3O4@SiO2@MIL-53(Al)

Microplastics (MPs) are now not only emerging as pollutants in the environment, but their current state of contamination in food is also a cause for concern. It is necessary to focus how to control, reduce, and even remove MPs. In this study, a magnetic metal-organic framework (MOF) material, Fe3O4@SiO2@MIL-53(Al), was synthesized and applied to simulate the magnetization and removal of four types of MPs. Fe3O4@SiO2@MIL-53(Al) was characterized by various means to demonstrate its successful synthesis as a core-shell nanomaterial. The conditions of the method were optimized by examining the effect of time, the mass ratio of material to MPs, temperature, and pH on the removal effect. The removal rates of four MPs were 54.10-94.17%, and the maximum adsorption capacities of Fe3O4@SiO2@MIL-53(Al) that can be adsorbed were 10511.45-44390.24 mg g-1. Notably, the material can effectively magnetize and remove MPs from liquid food containing alcohol with highest efficiency of 97.10 ± 1.21%. Potential adsorption mechanisms were analyzed using kinetic, isothermal, and thermodynamic models, and electrostatic attraction and hydrogen bonding were found to play a dominant role in the adsorption process. In addition, not only can Fe3O4@SiO2@MIL-53(Al) be reused up to five times to maintain high removal rates, but it can also be used in food systems. Therefore, Fe3O4@SiO2@MIL-53(Al) not only has the advantages of ease of use and stability, but also can efficiently and quickly magnetize and remove many common MPs in more complex matrices such as food.

PVDF/MOFs mixed matrix ultrafiltration membrane for efficient water treatment

Polyvinylidene fluoride (PVDF), with excellent mechanical strength, thermal stability and chemical corrosion resistance, has become an excellent material for separation membranes fabrication. However, the high hydrophobicity of PVDF membrane surface normally leads a decreased water permeability and serious membrane pollution, which ultimately result in low operational efficiency, short lifespan of membrane, high operation cost and other problems. Metal-organic frameworks (MOFs), have been widely applied for membrane modification due to its large specific surface area, large porosity and adjustable pore size. Currently, numerous MOFs have been synthesized and used to adjust the membrane separation properties. In this study, MIL-53(Al) were blended with PVDF casting solution to prepare ultrafiltration (UF) membrane through a phase separation technique. The optimal separation performance was achieved by varying the concentration of MIL-53(Al). The surface properties and microstructures of the as-prepared membranes with different MIL-53(Al) loading revealed that the incorporation of MIL-53(Al) enhanced the membrane hydrophilicity and increased the porosity and average pore size of the membrane. The optimal membrane decorated with 5 wt% MIL-53(Al) possessed a pure water permeability up to 43.60 L m^-2 h^-1 bar^-1, while maintaining higher rejections towards BSA (82.09%). Meanwhile, the prepared MIL-53(Al)/LiCl@PVDF membranes exhibited an excellent antifouling performance.

Designed Eu(III)-functionalized nanoscale MOF probe based on fluorescence resonance energy transfer for the reversible sensing of trace Malachite green

An ingenious nanoscale fluorescent sensor derived from Eu³⁺-postfunctionalized MIL-53 (Al) (Eu³⁺@MIL-53 [Al]) was fabricated though a simple and effective approach. Malachite green (MG) effectively turned off the luminescence of Eu³⁺@MIL-53 (Al) via fluorescence resonance energy transfer (FRET), thus enabling MG sensing. The developed probe exhibited instantaneous reusability after being cleaned with deionized water. The fluorescence intensity, quenching efficiency, and crystal structure of the recoverable sensor after five recycling processes were unchanged compared with those of the original sample. Moreover, the potential mechanism of MG detection was revealed in detail. This work represents the first attempt to determine MG in aquaculture water and products by using metal-organic frameworks (MOFs). The Eu³⁺@MIL-53 (Al) probe proved to be a remarkable fluorescence probe for MG with high selectivity, sensitivity, and excellent regeneration capability. It provides a promising functional platform for the recognition of illegal MG addition to aquaculture water and products.

Designed Tb(III)-Functionalized MOF-808 as Visible Fluorescent Probes for Monitoring Bilirubin and Identifying Fingerprints

Abnormal bilirubin (BR) level is a sign of several fatal diseases, so it is of great significance and challenge to develop a facile and effective family routine strategy for BR sensing. Herein, novel water-stable Tb³⁺@MOF-808 has been synthesized using a coordinated postsynthetic modification strategy and designed as a convenient and efficient fluorescence probe. The fabricated fluorescent probe exhibits a remarkable fluorescence quenching effect with the successive addition of BR, which displays fascinating features, such as fast response time, high sensitivity, and excellent selectivity. The quenching mechanism between the fluorescent probe and BR was also illustrated in detail. Importantly, the devised fluorescent probe successfully achieved the determination of BR in serum and urine, which has also been successfully used in the design of portable BR test paper. The developed monitoring platform for BR levels in vivo provides promising application potential for the prevention and early diagnosis of fatal diseases. Additionally, a molecular logic gate device that performs intelligent fluorescent sensing of BR was constructed. More interestingly, Tb³⁺@MOF-808 is used for development of latent fingerprints on different guest surfaces. The lines of the fluorescent fingerprints are clear and coherent, the details are obvious, and even sweat pores can be observed by naked eyes, which provides new means for tracking the criminal clue and handling cases efficiently.

Expanding the Horizon of Multicomponent Oxidative Coupling Reaction via the Design of a Unique, 3D Copper Isophthalate MOF-Based Catalyst Decorated with Mixed Spinel CoFe2O4 Nanoparticles

This work discloses the first ever magnetically retrievable copper isophthalate-based metal-organic framework (MOF) decorated with surface-modified cobalt ferrite (CoFe2O4) nanoparticles that have been utilized as catalytic reactors for obtaining a relatively large number of biologically active benzimidazole scaffolds. A facile one-pot solvothermal approach was employed for obtaining spherical and monodisperse CoFe2O4 nanoparticles, which were subsequently modified using suitable protecting and functionalizing agents. Finally, these functionalized magnetic nanoparticles were anchored onto the three-dimensional copper isophthalate MOF via a covalent immobilization methodology. The exploitation of advanced microscopic tools such as transmission electron microscopy and scanning electron microscopy provided valuable insights into the morphology of the immobilized MOF. These results indicated that the surface-modified magnetic nanoparticles had grown onto the surface of copper-5-nitroisophthalic acid MOF. A greener C-H functionalization strategy that involves the multicomponent oxidative cross-coupling between two different set of amines (sp2-hybridized nitrogen-containing anilines and sp3-hybridized nitrogen-containing alkyl/aryl amine derivatives) and sodium azide has been incorporated to provide access to a broad spectrum of the value-added target benzimidazole moieties. It is interesting to note that this magnetic MOF-catalyzed protocol not only replaces toxic solvents with water, which is a green solvent, but also enhances the economic competitiveness since the magnetic catalyst can be readily recovered and recycled for eight consecutive runs.