Ce 2 S 3 decorated ZnO-ZnS core-shell nanorod arrays: Efficient solar-driven photocatalytic properties

Boosted charge separation via Ce2S3 over dual Z-scheme ZnO-Ce2S3-MnO2 core double-shell nanocomposite for the degradation of diverse dye pollutants

Herein, core double-shell direct dual Z-scheme ZnO-Ce2S3-MnO2 nanocomposite was synthesized via a hydrothermal route along with pure ZnO, Ce2S3, MnO2, and characterized by numerous characterization tools for application in synthetic dyes degradation. The XRD, Raman, and FTIR analyses have confirmed the nanocomposite formation. TEM images exhibited the core double-shell morphology with an average particle diameter of 81 nm and stacking of ZnO, Ce2S3, and MnO2. EDX confirmed the existence of desired elements in the grown composition. The varied oxidation states, presence of defects, and fast charge transfer were also revealed from XPS, PL, and EIS. The ZnO-Ce2S3-MnO2 nanocomposite has an optical energy bandgap of 2.84 eV, capable of decomposing harmful dyes with excellent efficiency, 99.81% MB, 97.62% MO, 88.5% MR, and 58.9% EY in 40 min sunlight exposure. The effect of several operating parameters is also observed and obtained results showed the optimal catalyst dose was 20 mg, pH of 8, and dye concentration of 10 ppm. The scavenger's experiment suggests that •O2- and •OH are the main active radicals in the photodegradation reaction which is also evident in the dual Z-scheme formation. The MnO2 and ZnO layers covered the Ce2S3 (core) and dual Z-scheme formation allows rapid kinetics of redox reaction and provides plenteous channels for transfer of photo-generated charge carriers during photocatalysis. Thus, core double-shell direct dual Z-scheme photocatalysts having inorganic components could be an excellent choice for photocatalysis at the industrial level, particularly for water purification.

XPS valence band observable light-responsive system for photocatalytic acid Red114 dye decomposition using a ZnO-Cu2O heterojunction

ZnO-Cu2O composites were made as photocatalysts in a range of different amounts using an easy, cheap, and environment-friendly coprecipitation method due to their superior visible light activity to remove pollutants from the surrounding atmosphere. X-ray diffraction and Fourier transform infrared spectroscopy (FT-IR) have demonstrated that ZnO-Cu2O catalysts are made of highly pure hexagonal ZnO and cubic Cu2O. X-ray photoelectron spectroscopy has confirmed that there is a substantial interaction between the two phases of the resultant catalyst. The optical characterizations of the synthesized ZnO-Cu2O composite were done via UV-vis reflectance spectroscopy. Due to the doping on ZnO, the absorption range of the ZnO-Cu2O catalyst is shifted from the ultraviolet to the visible region due to diffuse reflection. The degradation efficiency is affected by the Ratio of ZnO: Cu2O and ZnO-Cu2O composite with a proportion of 90:10 exhibited the most prominent photocatalytic activity on Acid Red 114, with a pseudo-first-order rate constant of 0.05032 min-1 that was 6 and 11 times greater than those of ZnO and Cu2O, respectively. The maximum degradation efficiency is 97 %. The enhanced photocatalytic activity of the composite is caused by the synergistic interaction of ZnO and Cu2O, which improves visible light absorption by lowering band gap energy and decreasing the rate at which the electron-hole pairs recombine. The scavenging experiment confirmed that hydroxyl radical was the dominant species for the photodegradation of Acid Red 114. Notably, the recycling test demonstrated the ZnO-Cu2O photocatalyst was highly stable and recyclable. These results suggest that the ZnO-Cu2O mix might be able to clean up environmental pollutants when it meets visible light.

Heterogeneous Structures Consisting of Rod-like ZnO Interspersed with Ce2S3 Nanoparticles for Photo-Sensitive Supercapacitors with Enhanced Capacitive Performance

Photosensitive supercapacitors incorporate light-sensitive materials on capacitive electrodes, enabling solar energy conversion and storage in one device. In this study, heterogeneous structures of rod-shaped ZnO decorated with Ce2S3 nanoparticles on nickel foam (ZnO@Ce2S3/NF) are synthesized using a two-step hydrothermal method as photosensitive supercapacitor electrodes for capacitance enhancement under visible light. The formation of ZnO@Ce2S3 heterogeneous structures is confirmed using various structural characterization techniques. The area-specific capacitance of the ZnO@Ce2S3/NF composite electrode increased from 1738.1 to 1844.0 mF cm-2 after illumination under a current density of 5 mA cm-2, which is 2.4 and 2.8 times higher than that of ZnO and Ce2S3 electrodes under similar conditions, respectively, indicating the remarkable light-induced capacitance enhancement performance. The ZnO@Ce2S3/NF electrode also exhibits a higher photocurrent and photovoltage than the two single electrodes, demonstrating its excellent photosensitivity. The improved capacitance performance and photosensitivity under illumination are attributed to the well-constructed energy-level structure, which stimulates the flow of photogenerated electrons from the outer circuit and the involvement of photogenerated holes in the resulting surface-controlled capacitance. In addition, the assembled ZnO@Ce2S3/NF-based hybrid supercapacitor exhibits a great energy density of 145.0 mWh cm-2 under illumination. This study provides a novel strategy for the development of high-performance solar energy conversion/storage devices.

Recent advances on catalysts for photocatalytic selective hydrogenation of nitrobenzene to aniline

Selective hydrogenation of nitrobenzene (SHN) is an important approach to synthesize aniline, an essential intermediate with extremely high research significance and value in the fields of textiles, pharmaceuticals and dyes. SHN reaction requires high temperature and high hydrogen pressure via the conventional thermal-driven catalytic process. On the contrary, photocatalysis provides an avenue to achieve high nitrobenzene conversion and high selectivity towards aniline at room temperature and low hydrogen pressure, which is in line with the sustainable development strategies. Designing efficient photocatalysts is a crucial step in SHN. Up to now, several photocatalysts have been explored for photocatalytic SHN, such as TiO2, CdS, Cu/graphene and Eosin Y. In this review, we divide the photocatalysts into three categories based on the characteristics of the light harvesting units, including semiconductors, plasmonic metal-based catalysts and dyes. The recent progress of the three categories of photocatalysts is summarized, the challenges and opportunities are pointed out and the future development prospects are described. It aims to give a clear picture to the catalysis community and stimulate more efforts in this research area.

Controlled Growth of Silver Oxide Nanoparticles on the Surface of Citrate Anion Intercalated Layered Double Hydroxide

Silver oxide nanoparticles with controlled particle size were successfully obtained utilizing citrate-intercalated layered double hydroxide (LDH) as a substrate and Ag+ as a precursor. The lattice of LDH was partially dissolved during the reaction by Ag+. The released hydroxyl and citrate acted as a reactant in crystal growth and a size controlling capping agent, respectively. X-ray diffraction, X-ray photoelectron spectroscopy, and microscopic measurements clearly showed the development of nano-sized silver oxide particles on the LDH surface. The particle size, homogeneity and purity of silver oxide were influenced by the stoichiometric ratio of Ag/Al. At the lowest silver ratio, the particle size was the smallest, while the chemical purity was the highest. X-ray photoelectron spectroscopy and UV-vis spectroscopy results suggested that the high Ag/Al ratio tended to produce silver oxide with a complex silver environment. The small particle size and homogeneous distribution of silver oxide showed advantages in antibacterial efficacy compared with bulk silver oxide. LDH with an appropriate ratio could be utilized as a substrate to grow silver oxide nanoparticles with controlled size with effective antibacterial performance.

A radially controlled ZnS interlayer on ultra-long ZnO-Gd2S3 core-shell nanorod arrays for promoting the visible photocatalytic degradation of antibiotics

Nanorod (NR) arrays offer commendable visible-light-driven photocatalytic performances. Herein, we describe the construction of a ternary ZnO-ZnS-Gd₂S₃ nanostructural array in which a sulfidation process is used to decorate a Gd₂S₃ shell layer with a ZnS interface over vapor-phase-grown vertically-aligned ZnO. With control over the shell-wall thickness, the shell layer of ∼25 nm wall thickness on the ultra-long ZnO NR arrays exhibited a higher catalytic efficiency close to 3.3, 2.0, 1.2, and 1.8 times those of the bare ZnO, the ZnO-ZnS, the Gd₂S₃-decorated (∼10 nm) and Gd₂S₃ shell-layered (∼40 nm) ZnO-ZnS core-shell structures, respectively. The core-shell geometry and the shell-wall thickness with maximized contact interface afforded increased light absorption in the visible region and effectively retarded the recombination rate of the photoinduced charge carriers by confining electrons and holes separately, thus providing advantages in terms of the degradation of the pharmaceutical residue tetracycline and the industrial pollutant 4-nitrophenol in wastewater.

Sputtering control of Ag2O decoration configurations on ZnO nanorods and their surface arrangement effects on photodegradation ability toward methyl orange

In this study, a combinational strategy for synthesizing ZnO nanorod arrays interlaced with Ag₂O particles was proposed. Hydrothermally derived ZnO nanorod templates were sputter coated with Ag₂O particles. The sputtered Ag₂O particles can be decorated on the surfaces of the ZnO nanorod arrays with a randomly dispersive or continuous coverage characteristic by controlling the sputtering duration. Structural analysis revealed the formation of satisfactory crystalline ZnO-Ag₂O composite nanorods through the hydrothermal and sputtering methods. The ZnO-Ag₂O composite nanorods exhibited a significantly enhanced photoactivity compared with that of pristine ZnO nanorods under light irradiation. Moreover, the Ag₂O content and the coverage feature of the ZnO-Ag₂O composite nanorods influence the photodegradation of methyl orange solution by the composite nanorods under light irradiation. The photodegradation efficiency of the ZnO nanorods was substantially enhanced when the Ag₂O particles were decorated on the surfaces in a dispersive manner. This can be attributed to the optimal content of Ag₂O particles and their randomly dispersive characteristic on the surface of the composite nanorods, which resulted in the efficient transfer of photocarriers and markedly suppressed the electron-hole recombination rate.

Nitrogen-Implanted ZnO Nanorod Arrays for Visible Light Photocatalytic Degradation of a Pharmaceutical Drug Acetaminophen

The present study focuses on the effects of nitrogen (N) ion implantation in vertically aligned ZnO nanorod arrays (NRAs) and the photocatalytic degradation of acetaminophen. The X-ray diffraction of these NRAs exhibit a wurtzite structure with a predominant (002) diffraction peak that shifts slightly after N-ion implantation. The field emission scanning electron microscopic images of as-prepared NRAs show a length of ∼4 μm and diameter of ∼150 nm. UV-visible spectroscopy reveals that the band gap of pristine ZnO NRAs decreases from 3.2 to 2.18 eV after N-ion implantation. Under visible irradiation, the N-ion-implanted ZnO catalyst exhibits significant enhancement of the photocatalytic degradation of acetaminophen from 60.0 to 98.46% for 120 min.

Multiple carrier-transfer pathways in a flower-like In2S3/CdIn2S4/In2O3 ternary heterostructure for enhanced photocatalytic hydrogen production

A novel flower-like In2S3/CdIn2S4/In2O3 (ICS) ternary heterostructure (HS) is rationally constructed for the first time by a series of carefully designed procedures. In2O3 nanoflakes are the main constituent units which assemble into a flower-like skeleton structure, and CdIn2S4 nanoparticles are in situ generated on the surface of In2O3 nanoflakes through the transformation of CdS quantum dots (QDs) while In2S3 nanoparticles are in situ produced at the region between CdIn2S4 nanoparticles and In2O3 nanoflakes resulting from a synchronous sulfuration procedure. As expected, the rationally designed ICS ternary HSs display significantly enhanced photocatalytic H2 production, especially ICS5 (sulfurized for 5 h) with the highest H2 evolution rate of 20.04 μmol h-1 (10 mg catalyst is used for photocatalytic reaction), which is 26.7 times and 2.6 times higher than that of pure In2O3 (0.75 μmol h-1) and In2S3/In2O3 binary HS (7.88 μmol h-1), respectively. The enhanced photocatalytic activity can be attributed to the multiple interfaces formed in the ICS HSs, including the CdIn2S4-In2O3 interface, the In2S3-In2O3 interface, and the CdIn2S4-In2O3-In2S3 interface, which construct multiple pathways for the transfer of photogenerated charge carriers, effectively promoting the photocatalytic hydrogen production.

Transformation from Film to Nanorod via a Sacrifical Layer: Pulsed Laser Deposition of ZnO for Enhancing Photodetector Performance

A novel fabrication method for single crystalline ZnO nanorods by pulsed laser deposition (PLD) using a chemical-bath-deposited ZnS seed layer is proposed. For the substrate temperature (T_s) lower than 700 °C, the PLD-ZnO showed a polycrystalline phase and film-type morphology, resulting from the ZnS seed layer with a cubic phase. However, the ZnS film became a sacrifical layer and single crystalline ZnO(002) nanorods can be achieved at T_s of 900 °C, where ZnS was decomposed to zinc metals and sulfur fumes. The transformation from ZnO film to nanorod microstructure was demonstrated with the change of ZnS layer into Zn grains. Enhanced performance of the metal-semiconductor-metal photodetectors were fabricated with ZnO/ZnS samples grown at T_s of 500, 700, and 900 °C. The responsivities (@1 V and 370 nm) of these three devices were 1.71, 6.35, and 98.67 A/W, while their UV-to-visible discrimination ratios were 7.2, 16.5, and 439.1, respectively. Obviously, a higher light-capturing efficiency was obtained in the 900 °C-grown ZnO/ZnS device owing to its one-dimensional nanostructure with high crystal quality. The results indicate PLD combined with a sacrifical nanostructure is a promising method for obtaining high-quality ZnO nanorods, which paves the way for the fabrication of high performance ZnO-based devices.

Nanograined surface shell wall controlled ZnO–ZnS core–shell nanofibers and their shell wall thickness dependent visible photocatalytic properties

The core–shell form of ZnO–ZnS based heterostructural nanofibers (NF) has received increased attention for use as a photocatalyst owing to its potential for outstanding performance under visible irradiation.