Green and low cost tetracycline degradation processes by nanometric and immobilized TiO 2 systems

Efficient Day-and-Night NO2 Abatement by Polyaniline/TiO2 Nanocomposites

Finding innovative and highly performing approaches for NOx degradation represents a key challenge to enhance the air quality of our environment. In this study, the high efficiency of PANI/TiO₂ nanostructures in the NO₂ abatement both in the dark and under light irradiation is demonstrated for the first time. Heterostructures were synthesized by a "green" method and their composition, structure, morphology and oxidation state were investigated by a combination of characterization techniques. The results show that the unique PANI structure promotes two mechanisms for the NO₂ abatement in the dark (adsorption on the polymeric chains and chemical reduction to NO), whereas the photocatalytic behavior prevails under light irradiation, leading to the complete NOx degradation. The best-performing materials were subjected to recycling tests, thereby showing high stability without any significant activity loss. Overall, the presented material can represent an innovative and efficient night-and-day solution for NOx abatement.

Mineral-Supported Photocatalysts: A Review of Materials, Mechanisms and Environmental Applications

Although they are of significant importance for environmental applications, the industrialization of photocatalytic techniques still faces many difficulties, and the most urgent concern is cost control. Natural minerals possess abundant chemical inertia and cost-efficiency, which is suitable for hybridizing with various effective photocatalysts. The use of natural minerals in photocatalytic systems can not only significantly decrease the pure photocatalyst dosage but can also produce a favorable synergistic effect between photocatalyst and mineral substrate. This review article discusses the current progress regarding the use of various mineral classes in photocatalytic applications. Owing to their unique structures, large surface area, and negatively charged surface, silicate minerals could enhance the adsorption capacity, reduce particle aggregation, and promote photogenerated electron-hole pair separation for hybrid photocatalysts. Moreover, controlling the morphology and structure properties of these materials could have a great influence on their light-harvesting ability and photocatalytic activity. Composed of silica and alumina or magnesia, some silicate minerals possess unique orderly organized porous or layered structures, which are proper templates to modify the photocatalyst framework. The non-silicate minerals (referred to carbonate and carbon-based minerals, sulfate, and sulfide minerals and other special minerals) can function not only as catalyst supports but also as photocatalysts after special modification due to their unique chemical formula and impurities. The dye-sensitized minerals, as another natural mineral application in photocatalysis, are proved to be superior photocatalysts for hydrogen evolution and wastewater treatment. This work aims to provide a complete research overview of the mineral-supported photocatalysts and summarizes the common synergistic effects between different mineral substrates and photocatalysts as well as to inspire more possibilities for natural mineral application in photocatalysis.

Self-cleaning, photocatalytic films on aluminum plates for multi-pollutant air remediation: promoting adhesion and activity by SiO2interlayers

In recent years, nanoparticles have come under close scrutiny for their possible health and environmental issues, making them less attractive for photocatalytic applications in air or water purification. Replacing free nano-powders with active and stable films is thus a fundamental step towards developing effective photocatalytic devices. Aluminum represents a cheap and technologically-relevant substrate, but its photocatalytic applications have been hampered by adhesion issues and metal ion diffusion within the photocatalytic layer. In this work, the use of silica interlayers is investigated as a strategy to promote adhesion, efficiency and reusability of TiO₂films deposited on aluminum plates. Films were prepared from stable titania sols to avoid the use of nano-powders. Aluminum substrates with different surface morphology were investigated and the role of the silica interlayer thickness was studied. Films were extensively characterized, studying their structure, morphology, optical properties, adhesion and hardness. Self-cleaning properties were studied with respect to their superhydrophilicity and ability to resist fouling via alkylsilanes. Photocatalytic degradation tests were carried out using both volatile organic compounds and NO_x, also in recycle tests. The presence of the silica interlayer proved crucial to promote the film robustness and photocatalytic activity. The substrate morphology determined the optimal interlayer thickness, especially in terms of the film reusability.

Floating ZnO QDs-Modified TiO2/LLDPE Hybrid Polymer Film for the Effective Photodegradation of Tetracycline under Fluorescent Light Irradiation: Synthesis and Characterisation

In this work, mesoporous TiO₂-modified ZnO quantum dots (QDs) were immobilised on a linear low-density polyethylene (LLDPE) polymer using a solution casting method for the photodegradation of tetracycline (TC) antibiotics under fluorescent light irradiation. Various spectroscopic and microscopic techniques were used to investigate the physicochemical properties of the floating hybrid polymer film catalyst (8%-ZT@LLDPE). The highest removal (89.5%) of TC (40 mg/L) was achieved within 90 min at pH 9 due to enhanced water uptake by the LDDPE film and the surface roughness of the hybrid film. The formation of heterojunctions increased the separation of photogenerated electron-hole pairs. The QDs size-dependent quantum confinement effect leads to the displacement of the conduction band potential of ZnO QDs to more negative energy values than TiO₂. The displacement generates more reactive species with higher oxidation ability. The highly stable film photocatalyst can be separated easily and can be repeatedly used up to 8 cycles without significant loss in the photocatalytic ability. The scavenging test indicates that the main species responsible for the photodegradation was O₂^●−. The proposed photodegradation mechanism of TC was demonstrated in further detail based on the intermediates detected by LC-time-of-flight/mass spectrometry (LC/TOF-MS).

Facile hydrothermal synthesis of rod-like Nb2O5/Nb2CTx composites for visible-light driven photocatalytic degradation of organic pollutants

The MXene-based transition metal oxide composite is a potential candidate for photocatalysts. Rod-like pseudohexagonal phase Nb₂O₅/Nb₂CT_x composites were synthesized by a simple hydrothermal oxidation of 2D layered Nb₂CT_x. The Nb₂O₅/Nb₂CT_x composites show superior photocatalytic activity for 98.5% of degradation of Rhodamine B (RhB) for 120 min and 91.2% of tetracycline hydrochloride (TC-HCl) for 180 min under visible light irradiation. The Schottky junction is formed between Nb₂O₅ nanorods and Nb₂CT_x and the photo-generated carriers are effectively separated, enhancing the photocatalytic activity of the Nb₂O₅/Nb₂CT_x. High photoactivity and cycle stability of Nb₂O₅/Nb₂CT_x composites indicate that hydrothermal oxidation of 2D layered Nb₂CT_x is an alternative to prepare efficient photocatalyst for degradation of organic pollutants.

Surfactant Effects on the Synthesis of Redox Bifunctional V2O5 Photocatalysts

Novel V2O5 bifunctional photocatalysts were prepared following a wet chemical process with the addition of anionic or non-ionic surfactants into the precursor solution and further heating under reflux. Detailed characterization and investigation of the relevant light-matter interactions proved that surfactants addition had a strong impact on the morphology, while also affecting the crystallinity, the optoelectronic properties, and the surface chemistry of the novel photocatalysts. The most efficient photocatalyst (T80) was based on tween 80, a surface-active agent employed for the first time in the synthesis of vanadium oxide materials. T80 presented crystalline nature without structural defects, which are usually centers of e- - h+ recombination. This material also exhibited small crystal size, high porosity, and short migration paths for the charge carriers, enabling their effective separation during photocatalysis. Under UV light illumination, T80 was capable to reduce hexavalent chromium to trivalent up to 70% and showed high yields in degrading methylene blue azo-dye and tetracycline antibiotic water pollutants. This remarkably high bifunctional performance defines T80 as a promising and capable photocatalytic material for both advanced oxidation and reduction processes (AOPs-ARPs).

Facile synthesis of a novel Ag3PO4/MIL-100(Fe) Z-scheme photocatalyst for enhancing tetracycline degradation under visible light

In this work, a novel visible light-driven heterostructure Ag₃PO₄/MIL-100(Fe) composite photocatalyst was successfully synthesized via facile chemical deposition method at room temperature. Especially when the mass ratio of Ag₃PO₄ was 20% of MIL-100(Fe) (APM-2), it displayed the best photocatalytic performance, for which the degradation rate of tetracycline (TC) in conventional environment was 6.8 times higher than that of bare MIL-100(Fe). In addition, the effects of the initial concentration and pH of the solution on the degradation of tetracycline were also studied, and the results showed that the degradation of tetracycline was more favorable in a weakly alkaline environment. The excellent performance of Ag₃PO₄/MIL-100(Fe) composites was attributed to the fact that on the basis of having adequate photocatalytic active sites, modifying MIL-100(Fe) with an appropriate amount of Ag₃PO₄ particles can more effectively separate photogenerated electron-hole pairs. Five cycles of experiments showed that APM-2 has good photostability. Lastly, it was proved through quenching experiments that •O₂^-, h⁺, and •OH all played corresponding roles in the degradation process, and a possible Z-scheme heterostructure photocatalytic degradation mechanism was proposed.

UV/Vis Light Induced Degradation of Oxytetracycline Hydrochloride Mediated byCo-TiO2 Nanoparticles

Pharmaceuticals, especially antibiotics, constitute an important group of aquatic contaminants given their environmental impact. Specifically, tetracycline antibiotics (TCs) are produced in great amounts for the treatment of bacterial infections in both human and veterinary medicine. Several studies have shown that, among all antibiotics, oxytetracycline hydrochloride (OTC HCl) is one of the most frequently detected TCs in soil and surface water. The results of the photocatalytic degradation of OTC HCL in aqueous suspensions (30 mg·L⁻¹) of 0.5 wt.% cobalt-doped TiO₂ catalysts are reported in this study. The heterogeneous Co-TiO₂ photocatalysts were synthesized by two different solvothermal methods. Evonik Degussa Aevoxide P25 and self-prepared TiO₂ modified by the same methods were used for comparison. The synthesized photocatalysts were characterized by X-ray powder diffraction (XRD), Raman spectroscopy, transmission electron microscopy (TEM), UV/vis diffuse reflectance spectroscopy (DRS), and N₂ adsorption (BET) for specific surface area determination. The XRD and Raman results suggest that Ti⁴⁺ was substituted by Co²⁺ in the TiO₂ crystal structure. Uv/visible spectroscopy of Co-TiO₂-R showed a substantial redshift in comparison with bare TiO₂-R. The photocatalytic performance of the prepared photocatalysts in OTC HCL degradation was investigated employing Uv/vis spectroscopy and high-performance liquid chromatography (HPLC). The observed initial reaction rate over Co-TiO₂-R was higher compared with that of Co-TiO₂-HT, self-prepared TiO₂, and the commercial P25. The enhanced photocatalytic activity was attributed to the high surface area (153 m²·g⁻¹) along with the impurity levels within the band gap (2.93 eV), promoting the charge separation and improving the charge transfer ability. From these experimental results, it can be concluded that Co-doping under reflux demonstrates better photocatalytic performances than with the hydrothermal treatment.

Preparation of Hollow Flower-Like Microspherical β-Bi2O3/BiOCl Heterojunction and High Photocatalytic Property for Tetracycline Hydrochloride Degradation

Tetracycline cannot be effectively degraded in wastewater treatment. Therefore, the development of excellent photocatalysts is of significant importance for environmental protection. In this study, a β-Bi₂O₃/BiOCl heterojunction photocatalyst with hollow flower-like microspheres was successfully synthesized by the in-situ reaction of HCl and β-Bi₂O₃ hollow spheres. The prepared samples are characterized by Scanning electron microscopy, Transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, N₂ physical adsorption, UV-vis diffuse reflectance spectroscopy, and Photoluminescence. Then, research on the photocatalytic performance for the degradation of tetracycline hydrochloride was conducted. The results show that the photocatalytic performance of the β-Bi₂O₃/BiOCl composite is significantly better than the β-Bi₂O₃ and BiOCl. The increase in photocatalytic activity is due to the formation of a heterojunction between β-Bi₂O₃ and BiOCl, which effectively promotes the separation of photogenerated electron-hole pairs. Additionally, the heterojunction nanocomposite demonstrated the outstanding photocatalytic stability after five cycles, which indicates that the material can be used for water environment purification. This paper provides assistance for studying the photocatalytic mechanism of heterojunction photocatalytic materials.

Immobilised Cerium-Doped Zinc Oxide as a Photocatalyst for the Degradation of Antibiotics and the Inactivation of Antibiotic-Resistant Bacteria

The threat of antibiotic resistance to the wellbeing of societies is well established. Urban wastewater treatment plants (UWTPs) are recognised sources for antibiotic resistance dissemination in the environment. Herein a novel cerium-doped zinc oxide (Ce-ZnO) photocatalyst is compared to ZnO and the benchmark TiO2-P25 in the immobilised form on a metallic support, to evaluate a photocatalytic process as a possible tertiary treatment in UWTPs. The catalysts were compared for the removal of two antibiotics, trimethoprim (TMP) and sulfamethoxazole (SMX), and for the inactivation of Escherichia coli (E. coli) strain DH5-Alpha in isotonic sodium chloride solution and of autochthonous bacteria in real secondary wastewater. In real wastewater, E. coli and other coliforms were monitored, as well as the respective fractions resistant to ofloxacin and azithromycin. In parallel, Pseudomonas aeruginosa and the respective sub-population resistant to ofloxacin or ciprofloxacin were also monitored. Photocatalysis with both ZnO and Ce-ZnO was faster than using TiO2-P25 at degrading the antibiotics, with Ce-ZnO the fastest against SMX but slower than undoped ZnO in the removal of TMP. Ce-ZnO catalyst reuse in the immobilised form produced somewhat slower kinetics maintained >50% of the initial activity, even after five cycles of use. Approximately 3 log10 inactivation of E. coli in isotonic sodium chloride water was recorded with reproducible results. In the removal of autochthonous bacteria in real wastewater, Ce-ZnO performed better (more than 2 log values higher) than TiO2-P25. In all cases, E. coli and other coliforms, including their resistant subpopulations, were inactivated at a higher rate than P. aeruginosa. With short reaction times no evidence for enrichment of resistance was observed, yet with extended reaction times low levels of bacterial loads were not further inactivated. Overall, Ce-ZnO is an easy and cheap photocatalyst to produce and immobilise and the one that showed higher activity than the industry standard TiO2-P25 against the tested antibiotics and bacteria, including antibiotic-resistant bacteria.

Synthesis and characterization of a novel CNT-FeNi3/DFNS/Cu(ii) magnetic nanocomposite for the photocatalytic degradation of tetracycline in wastewater

Herein, Cu(ii) complexes were anchored within the nanospaces of a magnetic fibrous silicate with a high surface area and easily accessible active sites via a facile approach, leading to the successful synthesis of a novel potent nanocatalyst (FeNi₃/DFNS/Cu). Furthermore, FeNi₃/DFNS/Cu was supported on carbon nanotubes (CNTs) via an usual nozzle electrospinning method (CNT-FeNi₃/DFNS/Cu). In addition, its performance as a photocatalyst for the degradation of tetracycline was tested in a batch reactor. Tetracycline is an antibiotic that is commonly utilized in veterinary medicine and in the treatment of human infections, but is hazardous to aquatic environments. However, the usual processes for the removal of tetracycline are not efficient. The eco-friendly attributes of this catalytic system include high catalytic activity and ease of recovery from the reaction mixture using an external magnet, and it can be reused several times without significant loss in its performance. Also, protocols such as hot filtration, and mercury poisoning provided complete insight into the nature of this heterogeneous catalyst.

Herein, Cu(ii) complexes were anchored within the nanospaces of a magnetic fibrous silicate with a high surface area and easily accessible active sites via a facile approach, leading to the successful synthesis of a novel potent nanocatalyst (FeNi₃/DFNS/Cu).

Role of the growth step on the structural, optical and surface features of TiO2/SnO2 composites

TiO2/SnO2 composites have attracted considerable attention for their application in photocatalysis, fuel cells and sensors. Structural, morphological, optical and surface features play a pivotal role in photoelectrochemical applications and are critically related to the synthetic route. Most of the reported synthetic procedures require high-temperature treatments in order to tailor the sample crystallinity, usually at the expense of surface hydroxylation and morphology. In this work, we investigate the role of a treatment in an autoclave at a low temperature (100°C) on the sample properties and photocatalytic performance. With respect to samples calcined at 400°C, the milder crystallization treatment promotes anatase phase, mesoporosity and water chemi/physisorption, while reducing the incorporation of heteroatoms within the TiO2 lattice. The role of Sn content was also investigated, showing a marked influence, especially on the structural properties. Notably, at a high content, Sn favours the formation of rutile TiO2 at very low reaction temperatures (100°C), thanks to the structural compatibility with cassiterite SnO2. Selected samples were tested towards the photocatalytic degradation of tetracycline in water under UV light. Overall, the low-temperature treatment enables to tune the TiO2 phase composition while maintaining its surface hydrophilicity and gives rise to well-dispersed SnO2 at the TiO2 surface.

TiO2-SiO2-PMMA Terpolymer Floating Device for the Photocatalytic Remediation of Water and Gas Phase Pollutants

Floating photocatalytic devices are highly sought-after as they represent good candidates for practical application in pollutant remediation of large water basins. Here, we present a multilayer floating device for the photocatalytic remediation of contaminants present in water as well as of volatile species close to the water surface. The device was prepared on a novel tailored ter-polymer substrate based on methylmethacrylate, α-methylstyrene and perfluoroctyl methacrylate. The ad hoc synthesized support presents optimal characteristics in terms of buoyancy, transparency, gas permeability, mechanical, UV and thermal stability. The adhesion of the TiO2 top layer was favoured by the adopted casting procedure, followed by a corona pre-treatment and by the deposition of an intermediate SiO2 layer, the latter aimed also at protecting the polymer support from photocatalytic oxidation. The device was characterized by contact angle measurement, UV-vis transmittance and scanning electron microscopy. The final device was tested for the photocatalytic degradation of an emerging water pollutant as well as of vapors of a model volatile organic compound. Relevant activity was observed also under simulated solar irradiation and the device showed good stability and recyclability, prospecting its use for the photocatalytic degradation of pollutants in large water basins.

Removal mechanism of sulfamethazine and its intermediates from water by a rotating advanced oxidation contactor equipped with TiO2-high-silica zeolite composite sheets

The removal of antibiotic sulfamethazine (SMT) and its intermediates from water was investigated using a rotating advanced oxidation contactor (RAOC) equipped with TiO₂-high-silica zeolite composite sheets. SMT was readily removed from water through adsorption onto high-silica zeolite and photocatalytic decomposition by TiO₂ inside the composite sheet. Some degradation intermediates were retained and photocatalytically decomposed inside the composite sheet. Relatively hydrophobic intermediates such as hydroxylated SMT were captured inside the sheets, whereas hydrophilic intermediates were distributed in water. This was attributed to the hydrophobic interactions in the adsorption mechanism of high-silica zeolite. The time courses of the NH₄⁺, NO₃^-, and SO₄^2- ion concentration during the RAOC treatment of SMT were evaluated. After treatment by RAOC for 24 h, approximately 94% of nitrogen derived from the amino and sulfanilamide groups and 39% of sulfur from the sulfanilamide group were mineralized, which indicated that the mineralization behavior of SMT treated by RAOC was different from that treated by TiO₂ powder. These results strongly suggested that the dissociation of the amino group and cleavage of the sulfonamide group and subsequent dissociation of the amino group preferentially proceeded inside the composite sheets.

Emerging pollutant mixture mineralization by TiO2 photocatalysts. The role of the water medium

Pharmaceutics and personal care products (PPCPs) are raising growing concern due to their widespread usage and resistance to conventional remediation techniques. Several of them raise significant health and environmental concerns, especially when present in complex mixtures. Due to their chemical resistance, Advanced Oxidation Processes (AOPs) are needed for their complete removal from surface and wastewaters. In the present work, photocatalysis by titanium dioxide (TiO₂) under UV and simulated solar irradiation was adopted to degrade tetracycline hydrochloride, paracetamol, caffeine and atenolol, both as single pollutants and in mixtures. All molecules showed high removal and mineralization degrees. Moreover, no interference effects decreased the efficiency of the processes in the case of pollutant mixtures, achieving 60% of mineralization after 6 h. An immobilized TiO₂ system was also developed by depositing titania on titanium meshes. A 50% mineralization degree of the pollutant mixture was obtained after 6 h, revealing a suitable efficiency for field applications. Eventually, the impact of the matrix composition on the photocatalytic efficiency was investigated by studying the reaction both in simulated drinking water and in commercial bottled mineral water. The scavenger role played by HCO₃^- species appears to be dominant in inhibiting the mineralization.

Effect of Different Activated Carbon as Carrier on the Photocatalytic Activity of Ag-N-ZnO Photocatalyst for Methyl Orange Degradation under Visible Light Irradiation

In order to enhance the photodegradation of methyl orange (MO) by ZnO under visible light irradiation, ZnO nanoparticles co-doped with Ag and N and supported on activated carbon (AC) with different properties were synthesized through the sol-gel method. The prepared photocatalysts were characterized in terms of the structure and properties through X-ray diffraction, N₂ adsorption-desorption, ultraviolet-visible (UV-vis), diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, photoluminescence, and electron spin resonance. The photocatalytic activities of these photocatalysts followed the order: Ag-N-ZnO/ACs > Ag-N-ZnO > N, or Ag single-doped ZnO > commercial ZnO. This result was attributed to the small particle size, large surface area, narrow band gap, and high charge separation of Ag-N-ZnO/ACs. The Ag-N-ZnO/coconut husk activated carbon (Ag-N-ZnO/CHAC) exhibited the highest degradation efficiency of 98.82% for MO under visible light irradiation. This outcome was due to the abundant pore structure of Ag-N-ZnO/CHAC, resulting in stronger adsorption than that of other Ag-N-ZnO/ACs. Moreover, the degradation of MO on photocatalysis followed first order kinetics. The reactive species ·OH and ·O₂⁻ played more important roles in the photocatalytic degradation of MO over composite photocatalyst. Ag-N-ZnO/CHAC photocatalyst exhibited higher photocatalytic activity than unsupported Ag-N-ZnO after five recycling runs.

Bioinspired Synthesis of Photocatalytic Nanocomposite Membranes Based on Synergy of Au-TiO2 and Polydopamine for Degradation of Tetracycline under Visible Light

A bioinspired photocatalytic nanocomposite membrane was successfully prepared via polydopamine (pDA)-coated poly(vinylidene fluoride) (PVDF) membrane, as a secondary platform for vacuum-filtrated Au-TiO₂ nanocomposites, with enhanced photocatalytic activity. The degradation efficiency of Au-TiO₂/pDA/PVDF membranes reached 92% when exposed to visible light for 120 min, and the degradation efficiency of Au-TiO₂/pDA/PVDF membranes increased by 26% compared to that of Au-TiO₂ powder and increased by 51% compared to that of TiO₂/pDA/PVDF nanocomposite membranes. The degradation efficiency remained about 90% after five cycle experiments, and the Au-TiO₂/pDA/PVDF nanocomposite membranes showed good stability, regeneration performance, and easy recycling. The pDA coating not only served as a bioadhesion interface to improve the bonding force between the catalyst and the membrane substrate but also acted as a photosensitizer to broaden the wavelength response range of TiO₂, and the structure of Au-TiO₂/pDA/PVDF also improves the transfer rate of photogenerated electrons; the surface plasmon resonance effect of Au also played a positive role in improving the activity of the catalyst. Therefore, we believe that this study opens up a new strategy in preparing the bioinspired photocatalytic nanocomposite membrane for potential wastewater purification, catalysis, and as a membrane separation field.