Carbon sphere templates for TiO 2 hollow structures: Preparation, characterization and photocatalytic activity

Targeted delivery of temozolomide by nanocarriers based on folic acid-hollow TiO2 -nanospheres for the treatment of glioblastoma

Glioblastoma multiforme (GBM) is a highly malignant brain tumor. Its standard treatment includes a combination of surgery, radiation, and chemotherapy. The last involves the oral delivery of free drug molecules to GBM such as Temozolomide (TMZ). However, this treatment has limited effectiveness owing to the drugs premature degradation, lack of cell selectivity, and poor control of pharmacokinetics. In this work, the development of a nanocarrier based on hollow titanium dioxide (HT) nanospheres functionalized with folic acid (HT-FA) for the targeted delivery of temozolomide (HT-TMZ-FA) is reported. This approach has the potential benefits of prolonging TMZ degradation, targeting GBM cells, and increasing TMZ circulation time. The HT surface properties were studied, and the nanocarrier surface was functionalized with folic acid as a potential targeting agent against GBM. The loading capacity, protection from degradation, and drug retention time were investigated. Cell viability was performed to assess the cytotoxicity of HT against LN18, U87, U251, and M059K GBM cell lines. The cell internalization of HT configurations (HT, HT-FA, HT-TMZ-FA) was evaluated to study targeting capabilities against GBM cancer. Results show that HT nanocarriers have a high loading capacity, retain and protect TMZ for at least 48 h. Folic acid-functionalized HT nanocarriers successfully delivered and internalized TMZ to glioblastoma cancer cells with high cytotoxicity through autophagic and apoptotic cellular mechanisms. Thus, HT-FA nanocarriers could be a promising targeted delivery platform for chemotherapeutic drugs for the treatment of GBM cancer.

Description of Photodegradation Mechanisms and Structural Characteristics in Carbon@Titania Yolk-Shell Nanostructures by XAS

Carbon@titania yolk-shell nanostructures are successfully synthesized at different calcination conditions. These unique structure nanomaterials can be used as a photocatalyst to degrade the emerging water pollutant, acetaminophen (paracetamol). The photodegradation analysis studies have shown that the samples with residual carbon nanospheres have improved the photocatalytic efficiency. The local electronic and atomic structure of the nanostructures are analyzed by X-ray absorption spectroscopy (XAS) measurements. The spectra confirm that the hollow shell has an anatase phase structure, slight lattice distortion, and variation in Ti 3d orbital orientation. In situ XAS measurements reveal that the existence of amorphous carbon nanospheres inside the nano spherical shell inhibit the recombination of electron-hole pairs; more mobile holes are formed in the p-d hybridized bands near the Fermi surface and enables the acceleration of the carries that significantly enhance the photodegradation of paracetamol under UV-visible irradiation. The observed charge transfer process from TiO₂  hybridized orbital to the carbon nanospheres reduces the recombination rate of electrons and holes, thus increasing the photocatalytic efficiency.

Preparation and Photocatalytic Properties of Anatase TiO2 with Hollow Hexagonal Frame Structure

Titanium dioxide (TiO2) has been widely used to solve energy and environmental pollution problems due to its excellent properties. In this study, the precursor (HTiOF3) with a spherical structure composed of hexagonal prisms was prepared via a simple solvothermal method using tetrabutyl titanate, hydrofluoric acid, glacial acetic acid and isopropanol as raw materials. Then, the calcination time and temperature of the precursor were controlled to prepare anatase TiO2 with different morphologies, and the photocatalytic performance of the prepared catalysts was studied. When the precursor was calcined at 600 °C for 7 h, the prepared TiO2 had a unique hexagonal framework structure and exhibited excellent photocatalytic performance. The degradation rate of the RhB solution was 98.58% at 40 min and the rate of hydrogen evolution was 2508.12 μmol g−1 h−1.

Silver-doped active carbon spheres and their application for microbial decontamination of water

Highly efficient and durable, silver nanoparticles doped Active Carbon Spheres ACS(Ag) were synthesized by carbonization and activation of silver exchanged resins. The silver exchanged resins were prepared by exchanging H⁺ ions of polystyrene sulphonate resin with Ag⁺ ions of silver nitrate (AgNO₃). The quantity of Ag⁺ in the spheres was controlled by varying the concentration of AgNO₃, from 0.0125 to 0.1 M. With increasing molar concentration of AgNO_3, the effective intake of Ag⁺ by the sphere increases from 1.1 to 8.1 weight percent (wt %). For activation, the spheres were incubated in the CO₂ atmosphere for 6 h at fixed soaking temperature i.e. 1123 K. The characterization of synthesized silver doped ACS was performed by using different sophisticated instrumental techniques. The antimicrobial activity of silver doped ACS was studied against different bacterial strains like, E. coli, B. subtilis and Staphylococcus aureus. The study demonstrated that the zone of inhibition for E. coli was 16.9 ± 0.7 mm while for B. subtilis it was 17.1 ± 0.3 mm at a concentration of 8 mg of synthesized material. In addition, satisfactory results were obtained in shake flask and filtration test experiments also, even at a low concentration of 2 mg, showing growth inhibition of 94% for E. coli and 93% for B. subtilis. When the concentration of silver doped ACS was increased to 8 mg, complete removal of both the bacteria was observed after 24 h (100 % reduction for E. coli and B. subtilis). Furthermore, when silver doped ACS was tested against Staphylococcus aureus according to ASTM:E 2149-01 method, biocidal activity of up to 73% was observed. Therefore, the silver doped ACS can be considered as a potential biocidal material for the studied bacterial strains and hence find suitable application for decontamination of water.

•

Novel low-density silver doped active carbon spheres (ACS) were synthesized successfully.

•

Characterization and antibacterial activity was examined for water decontamination application.

•

Results revealed that the material effectively reduced microbial load by 99.9 %.

Pumice-supported ZnO-photocatalyzed degradation of organic pollutant in textile effluent: optimization by response surface methodology, artificial neural network, and adaptive neural-fuzzy inference system

A heterogeneous photocatalysis was adopted to treat textile industry effluent using a combination of pumice-supported ZnO (PUM-ZnO) photocatalyst and solar irradiation. The visible light-responsive PUM-ZnO photocatalyst was prepared via the impregnation method and characterized using various spectroscopic techniques. The photocatalytic degradation process was modeled via response surface methodology (RSM), artificial neural network (ANN), and adaptive neuro-fuzzy inference system (ANFIS), while the optimization of the three independent parameters significant to the photocatalytic process was carried out by a genetic algorithm (GA) and RSM methods. The low standard error of prediction (SEP) of 0.56-1.75% and high coefficient of determination (R²) greater than 0.96 for the models developed indicated that they adequately predicted the photodegradation process with high accuracy in the order of ANFIS > ANN > RSM. The process optimization results from the developed models showed that GA performed better than RSM. The best optimal condition (3.29 g/L catalyst dosage, 45.85 min irradiation time, and 3.13 effluent pH) that resulted in maximum degradation efficiency of 99.46% was achieved by the ANFIS model coupled with GA (ANFIS-GA).

Unexpected Link between the Template Purification Solvent and the Structure of Titanium Dioxide Hollow Spheres

Carbon spheres were applied as templates to synthesize titanium dioxide hollow spheres. The templates were purified with either ethanol or acetone, and the effects of this treatment on the properties of the resulting titania were investigated. The photocatalytic activity of the catalysts was measured via the decomposition of phenol model pollutant under visible light irradiation. It was found that the solvent used for the purification of the carbon spheres had a surprisingly large impact on the crystal phase composition, morphology, and photocatalytic activity. Using ethanol resulted in a predominantly rutile phase titanium dioxide with regular morphology and higher photocatalytic activity (r0,phenol = 3.9 × 10−9 M∙s−1) than that containing mainly anatase phase prepared using acetone (r0,phenol = 1.2 × 10−9 M∙s−1), surpassing the photocatalytic activity of all investigated references. Based on infrared spectroscopy measurements, it was found that the carbon sphere templates had different surface properties that could result in the appearance of carbonate species in the titania lattice. The presence or absence of these species was found to be the determining factor in the development of the titania’s properties.

Facile Synthesis of Water-soluble Carbon Spheres for the Sensitive and Selective Determination of Fe3+, Cr3+, and Hg2+ Ions

Water-soluble carbon spheres (CS) were prepared by a facile one-step hydrothermal synthetic method using glucose as a carbon source and sodium hydroxide as additives. The morphology and the chemical structure were characterized by transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS). In addition, the ultraviolet-visible (UV-vis) absorption spectrum and the fluorescence spectrum of the prepared CS were also investigated. The emission spectrum of the obtained CS depends on the excitation wavelength, which is similar to that of most carbon quantum dots. The fluorescence of the CS is quenched in the presence of Cr³⁺, Fe³⁺ and Hg²⁺. Based on this feature, the selective and sensitive detections of Cr³⁺, Fe³⁺ and Hg²⁺ were performed, and the detection limits were 6.72, 7.26, and 9.51 μM, respectively.

The synthesis of bayberry-like mesoporous TiO2 microspheres by a kinetics-controlled method and their hydrophilic films

Bayberry-like mesoporous TiO₂ hydrophilic films with high surface roughness and high density of surface hydroxyl groups.

MOF-derived TiO2 modified with g-C3N4 nanosheets for enhanced visible-light photocatalytic performance

A g-C₃N₄/TiO₂ heterojunction was prepared for the first time using a mechanical agitation method assisted by a template method and a two-step calcination method.

Utilization of Carbon Nanospheres in Photocatalyst Production: From Composites to Highly Active Hollow Structures

Titanium dioxide–carbon sphere (TiO₂–CS) composites were constructed via using prefabricated carbon spheres as templates. By the removal of template from the TiO₂–CS, TiO₂ hollow structures (HS) were synthesized. The CS templates were prepared by the hydrothermal treatment of ordinary table sugar (sucrose). TiO₂–HSs were obtained by removing CSs with calcination. Our own sensitized TiO₂ was used for coating the CSs. The structure of the CSs, TiO₂–CS composites, and TiO₂–HSs were characterized by scanning electron microscopy (SEM), infrared spectroscopy (IR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and diffuse reflectance spectroscopy (DRS). The effect of various synthesis parameters (purification method of CSs, precursor quantity, and applied furnace) on the morphology was investigated. The photocatalytic activity was investigated by phenol model pollutant degradation under visible light irradiation (λ > 400 nm). It was established that the composite samples possess lower crystallinity and photocatalytic activity compared to TiO₂ hollow structures. Based on XPS measurements, the carbon content on the surface of the TiO₂–HS exerts an adverse effect on the photocatalytic performance. The synthesis parameters were optimized and the TiO₂–HS specimen having the best absolute and surface normalized photocatalytic efficiency was identified. The superior properties were explained in terms of its unique morphology and surface properties. The stability of this TiO₂–HS was investigated via XRD and SEM measurements after three consecutive phenol degradation tests, and it was found to be highly stable as it entirely retained its crystal phase composition, morphology and photocatalytic activity.

Hollow black TiAlOx nanocomposites for solar thermal desalination

Although a solar-thermal conversion technique shows great potential for seawater desalination, there remains a grand challenge in exploring low-cost and high-efficiency photothermal materials. We report here a molten salt assisted galvanic replacement method for preparing a hollow black TiAlO_x composite, which features a high solar absorptivity with up to 90.2% and has a high efficiency of 71.1% in a high salinity solution containing 15.3 wt% NaCl (∼5 times more concentrated than seawater). We exemplify the practical application of such hollow black TiAlO_x composites as photothermal composites by setting up the automatic and manual tracking of solar desalination devices with a photic area of ∼1.0 m², which can produce purified water with a rate of above 4.0 L m^-2 day^-1 in high-salinity water under natural light irradiation, and maintains good stability upon 5 days of continuous running. The advantages of the as-developed hollow black TiAlO_x composites, including scalability, low cost, and high photothermal conversion efficiency, may open up a promising avenue practical application in seawater desalination.

Graphitic Carbon Nitride and Titanium Dioxide Modified with 1 D and 2 D Carbon Structures for Photocatalysis

Enhancing the photocatalytic performance of graphitic carbon nitride (g-C₃ N₄ , GCN) and titanium dioxide (TiO₂ ) has played a key role in the energy and environmental protection research community. Therefore, it is necessary to explore the synergy of both materials with carbon nanostructures for photocatalysis. Among the variety of carbon materials, graphene flakes and nanotubes, as nanoadditives to improve electron charge transfer and the optical absorption behavior in the visible-light region, have been widely explored. Thus, flake-like (2 D) and tubular (1 D) carbon structures in composition with GCN and/or TiO₂ are reviewed, as are their photocatalytic response. Current trends clearly indicate that this type of molecular hybrids can be efficiently exploited in this field. This Minireview covers state-of-the-art research over the period of 2015 to 2018.

A Study of Controllable Synthesis and Formation Mechanism on Flower-Like TiO2 with Spherical Structure

The development of photocatalytic materials with specific morphologies promises to be a good opportunity to discover geometrically relevant properties. Herein, this paper reported a facile hydrothermal method to directly synthesize TiO2 crystals with flower-like structures using tetrabutyl titanate (TBT) as a titanium source and ethylene glycol as an additive. We also proposed a reasonable growth mechanism by controlling reaction time in detail. The as-prepared samples were analyzed by using X-ray diffraction, scanning electron microscopy and transmission electron microscopy for structure and morphology characterization. The N2 adsorption-desorption isotherm results showed that the surface area of flower-like TiO2 with 10 h reaction time can reach 297 m2/g. We evaluated the photocatalytic performance of samples by using the degradation rate of methylene blue (MB) solution under UV-vis light. The TiO2 with 10 h reaction time exhibited a superior photocatalytic property than other samples in degrading MB under UV-vis light irradiation. More importantly, the catalyst could be reused many times. These results could benefit from the special morphology, high crystallinity and large specific surface area of the samples.

Studies on mass production and highly solar light photocatalytic properties of gray hydrogenated-TiO2 sphere photocatalysts

In this paper, it is first reported that gray hydrogenated TiO₂ sphere photocatalysts (H-TiO₂) with high reactivity to solar light are mass produced within a few minutes using an underwater discharge plasma modified sol-gel method at room temperature and atmospheric pressure. This plasma modified system is an easy one-step in-situ synthetic process and the crystallinity, hydrogenation, and spherical structure of H-TiO₂ are achieved by the synergy effect between the continuous reaction of highly energetic atomic and molecular species generated from the underwater plasma and surface tension of water. The resultant H-TiO₂ demonstrated high anatase/rutile bicrystallinity and extended optical absorption spectrum from the ultraviolet (UV) to visible range. Furthermore, various defects including oxygen vacancies and hydroxyl species on the TiO₂ surface permitted the enhancement of the photocatalytic performance. It was demonstrated that H-TiO₂ photocatalysts showed significant degradation efficiencies for reactive black 5 (RB 5), rhodamine B (Rho B), and phenol (Ph) under solar light irradiation, up to approximately 5 times higher than that of commercial anatase TiO₂ (C-TiO₂), which resulted in good water purification. Notably, it was also possible to cultivate HepG2 cells using such well-purified water (to degrees up to 76%), with minimal cytotoxicity. Considering all these results, we believe that this novel plasma technology is promising for important environmental applications.

Wet-Chemical Preparation of TiO₂-Based Composites with Different Morphologies and Photocatalytic Properties

TiO₂-based composites have been paid significant attention in the photocatalysis field. The size, crystallinity and nanomorphology of TiO₂ materials have an important effect on the photocatalytic efficiency. The synthesis and photocatalytic activity of TiO₂-based materials have been widely investigated in past decades. Based on our group’s research works on TiO₂ materials, this review introduces several methods for the fabrication of TiO₂, rare-earth-doped TiO₂ and noble-metal-decorated TiO₂ particles with different morphologies. We focused on the preparation and the formation mechanism of TiO₂-based materials with unique structures including spheres, hollow spheres, porous spheres, hollow porous spheres and urchin-like spheres. The photocatalytical activity of urchin-like TiO₂, noble metal nanoparticle-decorated 3D (three-dimensional) urchin-like TiO₂ and bimetallic core/shell nanoparticle-decorated urchin-like hierarchical TiO₂ are briefly discussed.

Photocatalytic hollow TiO2 and ZnO nanospheres prepared by atomic layer deposition

Carbon nanospheres (CNSs) were prepared by hydrothermal synthesis, and coated with TiO₂ and ZnO nanofilms by atomic layer deposition. Subsequently, through burning out the carbon core templates hollow metal oxide nanospheres were obtained. The substrates, the carbon-metal oxide composites and the hollow nanospheres were characterized with TG/DTA-MS, FTIR, Raman, XRD, SEM-EDX, TEM-SAED and their photocatalytic activity was also investigated. The results indicate that CNSs are not beneficial for photocatalysis, but the crystalline hollow metal oxide nanospheres have considerable photocatalytic activity.