Assessing the photoelectrochemical properties of C, N, F codoped TiO 2 nanotubes of different lengths

Galvanic Deposition of Pt Nanoparticles on Black TiO2 Nanotubes for Hydrogen Evolving Cathodes

A galvanic deposition method for the in-situ formation of Pt nanoparticles (NPs) on top and inner surfaces of high-aspect-ratio black TiO₂ -nanotube electrodes (bTNTs) for true utilization of their total surface area has been developed. Density functional theory calculations indicated that the deposition of Pt NPs was favored on bTNTs with a preferred [004] orientation and a deposition mechanism occurring via oxygen vacancies, where electrons were localized. High-resolution transmission electron microscopy images revealed a graded deposition of Pt NPs with an average diameter of around 2.5 nm along the complete nanotube axis (length/pore diameter of 130 : 1). Hydrogen evolution reaction (HER) studies in acidic electrolytes showed comparable results to bulk Pt (per geometric area) and Pt/C commercial catalysts (per mg of Pt). The presented novel HER cathodes of minimal engineering and low noble metal loadings (μg cm^-2 range) achieved low Tafel slopes (30-34 mV dec^-1 ) and high stability in acidic conditions. This study provides important insights for the in-situ formation and deposition of NPs in high-aspect-ratio structures for energy applications.

Visible Light Driven Photocatalytic Decolorization and Disinfection of Water Employing Reduced TiO2 Nanopowders

Defect-engineering of TiO2 can have a major impact on its photocatalytic properties for the degradation of persisting and non-biodegradable pollutants. Herein, a series of intrinsic and extrinsic defects are induced by post annealing of crystalline TiO2 under different reducing atmospheres. A detailed optoelectronic characterization sheds light on the key characteristics of the defect-engineered TiO2 nanopowders that are linked to the photocatalytic performance of the prepared photocatalysts. The photodegradation of a model dye, malachite green, as well as the inactivation of bacterial endospores of the Geobacillus stearothermophilus species were studied in the presence of the developed catalysts under visible light illumination. Our results indicate that a combination of certain defects is necessary for the improvement of the photocatalytic process for water purification and disinfection under visible light.

AgInS2 and graphene co-sensitized TiO2 photoanodes for photocathodic protection of Q235 carbon steel under visible light

AgInS₂ nanoparticle and graphene nanosheet co-sensitized anatase TiO₂ nanotube array films were fabricated by a combination of hydrothermal reaction and electrochemical anodization on titanium sheets. The results showed that the co-sensitization of AgInS₂ nanoparticles and graphene nanosheets extended the photoresponse of TiO₂ nanotubes into the visible-light region, and improved the photogenerated charge separation and transfer capability. The photocurrent density of the AgInS₂/graphene/TiO₂ composites (about 4.0 mA cm^-2) was 20 times that of bare TiO₂ (only 0.2 mA cm^-2) under visible-light illumination. The potential negative shift value of AgInS₂/graphene/TiO₂ composites was up to 0.68 V versus saturated calomel electrode. The AgInS₂/graphene/TiO₂ composites can provide Q235 carbon steel with highly efficient photocathodic protection under visible-light illumination.

Construction of Ag-modified TiO2/ZnO heterojunction nanotree arrays with superior photocatalytic and photoelectrochemical properties

The work involves the preparation of TiO₂/ZnO heterojunction nanotree arrays by a three-step: hydrothermal, sol–gel, and secondary hydrothermal method, and then modification of Ag quantum dots (QDs).

Ta3N5/Co(OH)x composites as photocatalysts for photoelectrochemical water splitting

Ta3N5 nanotubes (NTs) were obtained from nitridation of Ta2O5 NTs, which were grown directly on Ta foil through a 2-step anodization procedure. With Co(OH)x decoration, a photocurrent density as high as 2.3 mA cm-2 (1.23 V vs. NHE) was reached under AM1.5G simulated solar light; however, the electrode suffered from photocorrosion. More stable photoelectrochemical (PEC) performance was achieved by first loading Co(OH)x, followed by loading cobalt phosphate (Co-Pi) as double co-catalysts. The Co(OH)x/Co-Pi double co-catalysts may act as a hole storage layer that slows down the photocorrosion caused by the accumulated holes on the surface of the electrode. A "waggling" appearance close to the "mouth" of Ta2O5 NTs was observed, and may indicate structural instability of the "mouth" region, which breaks into segments after nitridation and forms a top layer of broken Ta3N5 NTs. A unique mesoporous structure of the walls of the Ta3N5 NTs, which is reported here the first time, is also a result of the nitridation process. We believe that the mesoporous structure makes it difficult for the nanotubes to be fully covered by the co-catalyst layer, hence rationalizing the remaining degradation by photocorrosion.

Recent Advances in the Use of Black TiO2 for Production of Hydrogen and Other Solar Fuels

Black TiO₂ has emerged as one of the most promising photocatalysts recently discovered. The reason behind its catalytic activity is considered to be due to the presence of defects and Ti³⁺ species at the surface of black TiO₂ nanostructures, which are crucial for its diverse applications. Moreover, disordered/crystalline surface layers and bulk regions have been identified and appear to influence the intrinsic properties of the material. Here, we present the latest studies on the use of black TiO₂ for metal free hydrogen production, as well as for CO₂ photoreduction and N₂ photofixation. After highlighting the structure/property relations, we conclude with some critical questions and suggest further topics of research in order to better understand the underlying mechanisms of light absorption in black TiO₂ , especially towards solar fuels production.

Natural sunlight driven highly efficient photocatalysis for simultaneous degradation of rhodamine B and methyl orange using I/C codoped TiO2 photocatalyst

Increasing the efficiency of dye degradation is a critical issue for the application for photocatalysis. It is one of the greatest challenges to enhance the utilization of photo generated carriers in semiconductor, especially for sunlight irradiation. In this study, I/C-codoped TiO₂ was synthesized by a simple solvothermal-calcination method. The codoping interstitial carbon and substitutional iodine not only widened the light absorption range of the TiO₂ photocatalysts, but also enhanced the separation of photo-induced carriers. The photocatalytic activities of RhB and MO degradation over the 4-I/C-TiO₂ photocatalyst could reach 98.2% and 94.2% after 25 min visible light irradiation (λ ≥ 400 nm), respectively. Notably, 4-I/C-TiO₂ showed good activity for MO and RhB mixed degradation and could also accomplish the photocatalytic degradation in the above mixed system under natural sunlight irradiation. According to the dark catalytic experiment, I/C-codoping could effectively accelerate the formation of hydroxyl radicals from the generated H₂O₂, which was formed for the enhanced photocatalytic activity of dye degradation. The gained knowledge may provide some insights into the photocatalytic degradation over the codoped TiO₂ catalyst.

Earth-Abundant Tin Sulfide-Based Photocathodes for Solar Hydrogen Production

Tin-based chalcogenide semiconductors, though attractive materials for photovoltaics, have to date exhibited poor performance and stability for photoelectrochemical applications. Here, a novel strategy is reported to improve performance and stability of tin monosulfide (SnS) nanoplatelet thin films for H₂ production in acidic media without any use of sacrificial reagent. P-type SnS nanoplatelet films are coated with the n-CdS buffer layer and the TiO₂ passivation layer to form type II heterojunction photocathodes. These photocathodes with subsequent deposition of Pt nanoparticles generate a photovoltage of 300 mV and a photocurrent density of 2.4 mA cm^-2 at 0 V versus reversible hydrogen electrode (RHE) for water splitting under simulated visible-light illumination (λ > 500 nm, P_in = 80 mW cm^-2). The incident photon-to-current efficiency at 0 V versus RHE for H₂ production reach a maximum of 12.7% at 575 nm with internal quantum efficiency of 13.8%. The faradaic efficiency for hydrogen evolution remains close to unity after 6000 s of illumination, confirming the robustness of the heterojunction for solar H₂ production.

Porous TiO₂-Based Gas Sensors for Cyber Chemical Systems to Provide Security and Medical Diagnosis

Gas sensors play an important role in our life, providing control and security of technical processes, environment, transportation and healthcare. Consequently, the development of high performance gas sensor devices is the subject of intense research. TiO₂, with its excellent physical and chemical properties, is a very attractive material for the fabrication of chemical sensors. Meanwhile, the emerging technologies are focused on the fabrication of more flexible and smart systems for precise monitoring and diagnosis in real-time. The proposed cyber chemical systems in this paper are based on the integration of cyber elements with the chemical sensor devices. These systems may have a crucial effect on the environmental and industrial safety, control of carriage of dangerous goods and medicine. This review highlights the recent developments on fabrication of porous TiO₂-based chemical gas sensors for their application in cyber chemical system showing the convenience and feasibility of such a model to provide the security and to perform the diagnostics. The most of reports have demonstrated that the fabrication of doped, mixed and composite structures based on porous TiO₂ may drastically improve its sensing performance. In addition, each component has its unique effect on the sensing properties of material.