Mechanistic study for enhanced CO oxidation activity on (Mn,Fe) co-doped CeO 2 (111)

Crucial size effect on dicarbonylation of acetylene over Pd/CsHPMo heterogeneous catalysts

The structure-sensitive activity of Pd catalysts in carbonylation reactions is an urgent problem to be explored. Herein, Pd nanocrystals with uniform particle sizes (2.3 nm, 3.4 nm, 5.0 nm and 6.7 nm) were produced by using PVP to regulate the growth of Pd nanoparticles. The catalytic carbonylation reaction showed a "volcanic curve" with the increase in Pd particle size, and the obtained Pd/CsHPMo catalyst with 5 nm Pd nanoparticles was preferred. The 5.0Pd/CsHPMo catalyst, with the strongest "SMSI effect", shows the strongest Pd-CsHPMo interaction, and the generated electron-deficient Pd active sites accelerated the cycle of Pdδ+ ↔ Pd (0), which endows its excellent catalytic efficiency. Meanwhile, DRIFTS in association with C2H2-TPD confirmed that the activation capacity of CO and C2H2 gas varies greatly on various Pd particle-size centers. These results provide a method for the accurate design of high-performance carbonylation catalysts.

Electronic and Structural Properties of Thin Iron Oxide Films on CeO2

Modification of CeO2 (ceria) with 3d transition metals, particularly iron, has been proven to significantly enhance its catalytic efficiency in oxidation or combustion reactions. Although this phenomenon is widely reported, the nature of the iron-ceria interaction responsible for this improvement remains debated. To address this issue, we prepared well-defined model FeOx/CeO2(111) catalytic systems and studied their structure and interfacial electronic properties using photoelectron spectroscopy, scanning tunneling microscopy, and low-energy electron diffraction, coupled with density functional theory (DFT) calculations. Our results show that under ultrahigh vacuum conditions, Fe deposition leads to the formation of small FeOx clusters on the ceria surface. Subsequent annealing results in the growth of large amorphous FeOx particles and a 2D FeOx layer. Annealing in an oxygen-rich atmosphere further oxidizes iron up to the Fe3+ state and improves the crystallinity of both the 2D layer and the 3D particles. Our DFT calculations indicate that the 2D FeOx layer interacts strongly with the ceria surface, exhibiting structural corrugations and transferred electrons between Fe2+/Fe3+ and Ce4+/Ce3+ redox pairs. The novel 2D FeOx/CeO2(111) phase may explain the enhancement of the catalytic properties of CeO2 by iron. Moreover, the corrugated 2D FeOx layer can serve as a template for the ordered nucleation of other catalytically active metals, in which the redox properties of the 2D FeOx/CeO2(111) system are exploited to modulate the charge of the supported metals.

Synthesis of Inexpensive Ternary Metal Oxides by a Co-Precipitation Method for Catalytic Oxidation of Carbon Monoxide

By using a simple co-precipitation method, new Fe2 O3 -based nanocatalysts (samples) were synthesized. The samples were composites of two or three transition metal oxides, MOx (M=Fe, Mn, Co, Ni, and Cu). The average size of CuO crystallites in the composites composed of two oxide components (CuO-Fe2 O3 ) was about 14.3 nm, while in those composed of three (CuO-MnOx -Fe2 O3 ), the composite's phase compositions were almost in the amorphous form when annealing the sample at 300 °C. The latter sample had a specific surface area higher than that of the former, 207.9 and 142.1 g/m2 , respectively, explaining its higher catalytic CO oxidation. The CO conversion over the CuO-MnOx -Fe2 O3 -300 catalyst (1 g of catalyst, 2600 ppm of CO concentration in air, and 1.0 L/min of gas flow rate) begins at about 40 °C; the temperature for 50 % CO conversion (t50 ) is near 82 °C; and CO removal is almost complete at t99 ≈110 °C. The activity of the optimal sample was tested in different catalytic conditions, thereby observing a high durability of 99-100 % CO conversion at 130 °C. The obtained results were derived from XRD, FTIR, BET, SEM, elemental analysis and mapping, as well as catalytic experiments.

A glucose-assisted redox hydrothermal route to prepare a Mn-doped CeO2 catalyst for the total catalytic oxidation of VOCs

In this study, a novel glucose-assisted redox hydrothermal method has been presented to prepare an Mn-doped CeO₂ catalyst (denoted as Mn-CeO₂-R) for the first time. The obtained catalyst contains uniform nanoparticles with a small crystallite size, a large mesopore volume, and rich active surface oxygen species. Such features collectively contribute to improving the catalytic activity for the total catalytic oxidation of methanol (CH₃OH) and formaldehyde (HCHO). Interestingly, the large mesopore volume feature of the Mn-CeO₂-R samples could be considered an essential factor to eliminate the diffusion limit, favoring the total oxidation of toluene (C₇H₈) at high conversion. Therefore, the Mn-CeO₂-R catalyst outperforms both bare CeO₂ and conventional Mn-CeO₂ catalysts with T ₉₀ values of 150 °C and 178 °C for HCHO and CH₃OH, respectively, and 315 °C for C₇H₈, at a high GHSV of 60 000 mL g^-1 h^-1. Such robust catalytic activities signify a potential utilization of Mn-CeO₂-R for the catalytic oxidation of volatile organic compounds (VOCs).

Two dimensional Zr2CO2/H-FeCl2van der Waals heterostructures with tunable band gap, potential difference and magnetic anisotropy

Two dimensional (2D) van der Waals (vdW) heterostructures have potential applications in novel low dimensional spintronic devices due to their unique electronic and magnetic properties. Here, the electronic and magnetic properties of 2D Zr₂CO₂/H-FeCl₂heterostructures are calculated by first principles calculations. The 2D Zr₂CO₂/H-FeCl₂heterostructures are magnetic semiconductor. The electronic structure and magnetic anisotropy of Zr₂CO₂/H-FeCl₂heterostructure can be regulated by the biaxial strain and external electric field. The band gap and potential difference of Zr₂CO₂/H-FeCl₂heterostructure can be affected by in-plane biaxial strain. At a compressive strain of -8%, the Zr₂CO₂/H-FeCl₂heterostructure becomes metallic. All of the Zr₂CO₂/H-FeCl₂heterostructures are magnetic with in-plane magnetic anisotropy (IMA). The Zr₂CO₂/H-FeCl₂heterostructure is a semiconductor at the electric field from -0.5 V Å^-1to +0.5 V Å^-1. Furthermore, Zr₂CO₂/H-FeCl₂heterostructure shows IMA at the negative electric field, while it shows perpendicular magnetic anisotropy at the positive electric field. These results show that Zr₂CO₂/H-FeCl₂heterostructure has potential applications in multifunctionalnanoelectronic devices.

Defect Engineering of Ceria Nanocrystals for Enhanced Catalysis via a High-Entropy Oxide Strategy

Introducing transition-metal components to ceria (CeO₂) is important to tailor the surface redox properties for a broad scope of applications. The emergence of high-entropy oxides (HEOs) has brought transformative opportunities for oxygen defect engineering in ceria yet has been hindered by the difficulty in controllably introducing transition metals to the bulk lattice of ceria. Here, we report the fabrication of ceria-based nanocrystals with surface-confined atomic HEO layers for enhanced catalysis. The increased covalency of the transition-metal-oxygen bonds at the HEO-CeO₂ interface promotes the formation of surface oxygen vacancies, enabling efficient oxygen activation and replenishment for enhanced CO oxidation capabilities. Understanding the structural heterogeneity involving bulk and surface oxygen defects in nanostructured HEOs provides useful insights into rational design of atomically precise metal oxides, whose increased compositional and structural complexities give rise to expanded functionalities.

Tunable Electronic Metal-Support Interactions on Ceria-Supported Noble-Metal Nanocatalysts in Controlling the Low-Temperature CO Oxidation Activity

A fundamental study on the metal-support interactions of supported metal catalysts is of great importance for developing heterogeneous catalysts with high performance, is still attracting and challenging in many heterogeneous catalytic reactions. In this work, we report the catalytic performances of CeO₂-supported noble-metal catalysts among single atoms, subnanoclusters (∼1 nm), and nanoparticles (2.2-2.7 nm) upon low-temperature CO oxidation reaction between 50 and 250 °C. The subnanoclusters and nanoparticles of Ru, Rh, and Ir showed much higher activities than those of the single atoms, while a Pd single-atom catalyst was more active than Pd subnanoclusters and nanoparticles. According to the results of multiple ex situ and in situ characterizations, the much different activities of Ru, Rh, Ir, and Pd were derived from the alterable electronic metal-support interactions (EMSI), which determine the concurrent reaction pathway including the famous Mars van Krevelen mechanism and carbonate-intermediate route on the most active metal sites of M^δ+ (0 < δ < 1) for Ru, Rh, and Ir and Pd²⁺ for Pd. Also, the moderate EMSI of CeO₂-supported Rh subnanoclusters furthest benefited activation of the adsorbed CO molecule and ensured it the highest activity among CeO₂-supported Ru, Rh, and Ir catalysts with similar metal deposit sizes.

A High Entropy Oxide Designed to Catalyze CO Oxidation Without Precious Metals

The chemical complexity of single-phase multicationic oxides, commonly termed high entropy oxides (HEOs), enables the integration of conventionally incompatible metal cations into a single-crystalline phase. However, few studies have effectively leveraged the multicationic nature of HEOs for optimization of disparate physical and chemical properties. Here, we apply the HEO concept to design robust oxidation catalysts in which multicationic oxide composition is tailored to simultaneously achieve catalytic activity, oxygen storage capacity, and thermal stability. Unlike conventional catalysts, HEOs maintain single-phase structure, even at high temperature, and do not rely on the addition of expensive platinum group metals (PGM) to be active. The HEOs are synthesized through a facile, relatively low temperature (500 °C) sol-gel method, which avoids excessive sintering and catalyst deactivation. Nanostructured high entropy oxides with surface areas as high as 138 m²/g are produced, marking a significant structural improvement over previously reported HEOs. Each HEO contained Ce in varying concentrations, as well as four other metals among Al, Fe, La, Mn, Nd, Pr, Sm, Y, and Zr. All samples adopted a fluorite structure. First row transition metal cations were most effective at improving CO oxidation activity, but their incorporation reduced thermal stability. Rare earth cations were necessary to prevent thermal deactivation while maintaining activity. In sum, our work demonstrates the utility of entropy in complex oxide design and a low-energy synthetic route to produce nanostructured HEOs with cations selected for a cooperative effect toward robust performance in chemically and physically demanding applications.

Synergistic Effect of Simultaneous Doping of Ceria Nanorods with Cu and Cr on CO Oxidation and NO Reduction

Ceria particles play a key role in catalytic applications such as automotive three-way catalytic systems in which toxic CO and NO are oxidized and reduced to safe CO2 and N2 , respectively. In this work, we explore the incorporation of Cu and Cr metals as dopants in the crystal structure of ceria nanorods prepared by a single-step hydrothermal synthesis. XRD, Raman and XPS confirm the incorporation of Cu and Cr in the ceria crystal lattices, offering ceria nanorods with a higher concentration of oxygen vacancies. XPS also confirms the presence of Cr and Cu surface species. H2 -TPR and XPS analysis show that the simultaneous Cu and Cr co-doping results in a catalyst with a higher surface Cu concentration and a much-enhanced surface reducibility, in comparison with either undoped or singly doped (Cu or Cr) ceria nanorods. While single Cu doping enhances catalytic CO oxidation and Cr doping improves catalytic NO reduction, co-doping with both Cu and Cr enhances the benefits of both dopants in a synergistic manner employing roughly a quarter of dopant weight.

CoOx-decorated CeO2 heterostructures: effects of morphology on their catalytic properties in diesel soot combustion

The effect of the morphology, which exposes different crystal planes, on the physicochemical properties and catalytic activity in diesel carbon soot oxidation was studied using CoOx-decorated CeO2 (CoCeO2) heterostructured catalysts, such as nanorods (NRs), nanocubes (NCs), and nanoparticles (NPs). The CoOx/CeO2 nanorods (CoCeO2-NR) showed superior carbon soot combustion activity at lower temperatures to CoCeO2-NCs and CoCeO2-NPs under both tight and loose contact modes with soot combustion temperatures (T50) of 321 and 494 °C, respectively. A comprehensive analysis by means of X-ray diffraction, Raman spectroscopy, high-angle annular dark-field scanning transmission electron microscopy, in situ X-ray absorption fine structure, temperature-programmed reduction, oxygen storage/release measurements, and density functional theory calculations revealed that the improved activity of CoCeO2-NRs is mainly ascribed to the high oxygen release rate and strong redox capability of the supported Co species, with complete reversibility. This originates from the high reactivity of oxygen atoms on (110) surfaces, compared to (100) and (111) surfaces over CeO2. Additionally, CoCeO2-NRs displayed durability and recyclability without any significant loss of catalytic activity or structural change. These insights will aid in the rational design of practical catalysts for the purification of diesel exhaust and other important transformations.

Facet-Dependent Reactivity of Fe2O3/CeO2 Nanocomposites: Effect of Ceria Morphology on CO Oxidation

Ceria has been widely studied either as catalyst itself or support of various active phases in many catalytic reactions, due to its unique redox and surface properties in conjunction to its lower cost, compared to noble metal-based catalytic systems. The rational design of catalytic materials, through appropriate tailoring of the particles’ shape and size, in order to acquire highly efficient nanocatalysts, is of major significance. Iron is considered to be one of the cheapest transition metals while its interaction with ceria support and their shape-dependent catalytic activity has not been fully investigated. In this work, we report on ceria nanostructures morphological effects (cubes, polyhedra, rods) on the textural, structural, surface, redox properties and, consequently, on the CO oxidation performance of the iron-ceria mixed oxides (Fe2O3/CeO2). A full characterization study involving N2 adsorption at –196 °C, X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS), temperature programmed reduction (TPR), and X-ray photoelectron spectroscopy (XPS) was performed. The results clearly revealed the key role of support morphology on the physicochemical properties and the catalytic behavior of the iron-ceria binary system, with the rod-shaped sample exhibiting the highest catalytic performance, both in terms of conversion and specific activity, due to its improved reducibility and oxygen mobility, along with its abundance in Fe2+ species.

Growth Kinetics of Individual Co Particles Ex-solved on SrTi0.75Co0.25O3-δ Polycrystalline Perovskite Thin Films

A precise control of the size, density, and distribution of metal nanoparticles dispersed on functional oxide supports is critical for promoting catalytic activity and stability in renewable energy and catalysis devices. Here, we measure the growth kinetics of individual Co particles ex-solved on SrTi_0.75Co_0.25O_3-δ polycrystalline thin films under a high vacuum, and at various temperatures and grain sizes using in situ transmission electron microscopy. The ex-solution preferentially occurs at grain boundaries and corners which appear essential for controlling particle density and distribution, and enabling low temperature ex-solution. The particle reaches a saturated size after a few minutes, and the size depends on temperature. Quantitative measurements with a kinetic model determine the rate limiting step, vacancy formation enthalpy, ex-solution enthalpy, and activation energy for particle growth. The ex-solved particles are tightly socketed, preventing interactions among them over 800 °C. Furthermore, we obtain the first direct clarification of the active reaction site for CO oxidation-the Co-oxide interface, agreeing well with density functional theory calculations.

A Simple Descriptor to Rapidly Screen CO Oxidation Activity on Rare-Earth Metal-Doped CeO2: From Experiment to First-Principles

Ceria (CeO₂) is an attractive catalyst because of its unique properties, such as facile redoxability and high stability. Thus, many researchers have examined a wide range of catalytic reactions on ceria nanoparticles (NPs). Among those contributions are the reports of the dopant-dependent catalytic activity of ceria. On the other hand, there have been few mechanistic studies of the effects of a range of dopants on the chemical reactivity of ceria NPs. In this study, we examined the catalytic activities of pure and Pr, Nd, and Sm-doped CeO₂ (PDC, NDC, and SDC, respectively) NPs on carbon monoxide (CO) oxidation. Density functional theory (DFT) calculations were also performed to elucidate the reaction mechanism on rare-earth (RE)-doped CeO₂(111). The experimental results showed that the catalytic activities of CO oxidation were in the order of CeO₂ > PDC > NDC > SDC. This is consistent with the DFT results, where the reaction is explained by the Mars-van Krevelen mechanism. On the basis of the theoretical interpretation of the experimental results, the ionic radius of the RE dopant can be used as a simple descriptor to predict the energy barrier at the rate-determining step, thereby predicting the entire reaction activity. Using the descriptor, a wide range of RE dopants on CeO₂(111) were screened for CO oxidation. These results provide useful insights to unravel the CO oxidation activity on various oxide catalysts.