Visible light driven LaFeO3 nano sphere/RGO composite photocatalysts for efficient water decomposition reaction

Efficient Hydrogen Production by a Photoredox Cascade Catalyst Comprising Dual Photosensitizers and a Transparent Electron Mediator

One-directional electron transport between a photocatalyst and redox mediator is crucial for achieving highly active Z-scheme water-splitting photocatalysis. Herein, a photoredox cascade catalyst that artificially mimics the electron transport chain in natural photosynthesis was synthesized from a Pt-TiO₂ nanoparticle catalyst, two photosensitizers (RuCP⁶ and RuP⁶), and a visible-light-transparent electron mediator (HCRu). During photocatalytic hydrogen evolution in the presence of a redox-reversible electron donor, [Co(bpy)₃]²⁺ (bpy = 2,2'-bipyridine), the HCRu-Zr-RuCP⁶-Zr-RuP⁶@Pt-TiO₂ (PRCC-1) photocatalyst exhibited the highest reported initial (1 h) apparent quantum yield (iAQY = 2.23%) of dye-sensitized TiO₂ photocatalysts to date. Furthermore, PRCC-1 successfully produced hydrogen when using hydroquinone monosulfonate (H₂QS^-) as the hydrogen source.

Box-Behnken Design for Hydrogen Evolution from Sugar Industry Wastewater Using Solar-Driven Hybrid Catalysts

Hydrogen is a clean and green fuel and can be produced from renewable sources via photocatalysis. Solar-driven hybrid catalysts were synthesized and characterized (scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), photoluminescence (PL) spectroscopy, and UV-vis diffuse reflectance spectroscopy (DSR)), and the results implied that graphene-supported LaRuO₃ is a more promising photocatalyst to produce hydrogen and was used to produce hydrogen from sugar industry wastewater. To investigate the main and interaction effects of reaction parameters (pH, catalyst amount, and [H₂O₂]₀) on the evolved hydrogen amount, the Box-Behnken experimental design model was used. The highest hydrogen evolution obtained was 6773 μmol/g_cat from sugar industry wastewater at pH 3, 0.15 g/L GLRO, and 15 mM H₂O₂. Based on the Pareto chart for the evolved hydrogen amount using GLRO, among the main effects, the only effective parameter was the catalyst amount for the photocatalytic hydrogen evolution from sugar industry wastewater. In addition, the squares of pH and two-way interaction of pH and [H₂O₂]₀ were also statistically efficient over the evolved hydrogen amount.

Removal of Methylene Blue by Crosslinked Egg White Protein/Graphene Oxide Bionanocomposite Aerogels

Egg white protein is a non-toxic and biodegradable biopolymer that forms a gel easily via simple thermal denaturation treatment. A novel aerogel on the basis of egg white protein crosslinked with graphene oxide was prepared via a facile freeze-drying method. The structure and physicochemical characteristics of the aerogels were characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA) and Brunauer–Emmett–Teller (BET) analysis. The adsorption properties of the aerogels were investigated by studying the influencing factors such as the solution pH, dose, temperature and contact time. The adsorption capacity of methylene blue onto the aerogels was tested, whose maximum adsorption capacity, calculated by the Langmuir isotherm equation, reached 91.7 mg/g. Adsorption kinetics studies showed that the adsorption followed the pseudo-second-order kinetic model. Thermodynamic data implied that methylene blue adsorbed by the aerogels was an exothermic and spontaneous process.

Photocatalyst-Mediator Interface Modification by Surface-Metal Cations of a Dye-Sensitized H2 Evolution Photocatalyst

To develop highly active H₂ evolving dye-sensitized photocatalysts (DSPs) applicable for Z-scheme water splitting, we synthesized a series of Ru(II)-dye-double-layered DSPs, X'-RuCP⁶-Zr-RuP⁶@Pt-TiO₂ (X'-DSP) with different surface-bound metal cations (X' = Fe²⁺, Y³⁺, Zr⁴⁺, Hf⁴⁺, and Bi³⁺). In 0.5 M KI aqueous solution, the photocatalytic H₂ evolution activity under blue light irradiation (λ = 460 ± 15 nm) increased in the following order: nonmetal-modified DSP, H⁺-DSP (turn over number for 6 h irradiation = 35.2) < Fe²⁺-DSP (54.9) ≈ Bi³⁺-DSP (55.2) < Hf⁴⁺-DSP (65.5) ≈ Zr⁴⁺-DSP (68.3) ≈ Y³⁺-DSP (71.5), suggesting that the redox-inactive and highly charged metal cations tend to improve the electron donation from the iodide electron mediator. On the other hand, DSPs having heavy metal cations, Hf⁴⁺-DSP (18.4) and Bi³⁺-DSP (16.6), exhibited better activity under green light irradiation (λ = 530 ± 15 nm) than Zr⁴⁺-DSP (15.7) and H⁺-DSP (7.80), implying the contribution of a heavy atom effect of the surface-bound metal cation to partially allow the spin-forbidden metal-to-ligand charge-transfer excitation.

Boosting photocatalytic reduction of nitrate to ammonia enabled by perovskite/biochar nanocomposites with oxygen defects and O-containing functional groups

Photocatalytic ammonia synthesis from waste nitrate has emerged as a promising strategy in water treatment; however, the conversion and selectivity still remain a great challenge. Herein, recyclable magnetic perovskite (LaFeO₃)/biochar nanocomposites were successfully synthesized by the co-pyrolysis of the lotus biomass and Fe/La salts without extra organic complexants. Results showed that the lotus interacted with the iron ions (Fe³⁺) and the lanthanum ions (La³⁺) changing the surface and structural characteristics of catalysts. Oxygen defects of LaFeO₃ were enhanced due to biomass introduction, which accelerated the separation of electron-hole pairs. On the other hand, Fe/La salts participated in the modification process of the biochar surface during the carbonization, which promoted the exposure of oxygen-containing functional groups and aromatic structures facilitating the nitrate adsorption. Notably, the redox-active quinone/phenol groups on the biochar surface contributed to the photogenerated electrons exchange favoring the ammonium ion (NH₄⁺) selectivity as direct electron donor. Nitrate conversion reached 98% and ammonia selectivity reached 97% over the LaFeO₃/biochar photocatalyst under visible light irradiation, when the mass ratio of lotus and Fe/La salts was optimized. Our findings may potentially provide a green and cost-effective way for ammonia recovery from nitrate contaminants.

The strong interfacial coupling effect of Nafion between LaFeO3/electrolyte for efficient photoelectrochemical water reduction

Insufficient reduction capability and scanty active substance limit the application of LaFeO₃(LFO) in the field of photoelectrochemical (PEC) water splitting. This work demonstrates a judicious combination of LFO/Nafion composite to improve the PEC performance by a unique dip-coating method on the FTO. The photocurrent density of the LFO electrode coated with two layers Nafion increased to -23.9μA cm^-2at 0.47 V versus RHE, which is 4.1 times that of the pristine LFO. Based on the experimental data and theoretical analysis, the improvement of the PEC properties is attributed to the construction of organic/inorganic units, which would enable strong electronic coupling and favor interfacial charge transfer, resulting in a 30 mV downward shift of its flat band potential. Thus, the conduction band gets closer to the proton reduction potential of H⁺to H₂after decoration with Nafion, resulting in a stronger photogenerated electron reduction ability. Our study provides insights that organic materials modify semiconductor photoelectrodes for accelerating charge kinetics.

Biohydrogen from organic wastes as a clean and environment-friendly energy source: Production pathways, feedstock types, and future prospects

Microbial fermentation of organic matter under anaerobic conditions is currently the prominent pathway for biohydrogen production. Organic matter present in waste residues is regarded as an economic feedstock for biohydrogen production by dark and photo fermentative bacteria. Agricultural residues, fruit wastes, vegetable wastes, industrial wastewaters, and other livestock residues are some of the organic wastes most commonly used for biohydrogen production due to their higher organic content and biodegradability. Appropriate pretreatments are required to enhance the performance of biohydrogen from complex organic wastes. Biohydrogen production could also be enhanced by optimizing operation conditions and the addition of essential nutrients and nanoparticles. This review describes the pathways of biohydrogen production, discusses the effect of organic waste sources used and microbes involved on biohydrogen production, along with addressing the key parameters, advantages, and difficulties in each biohydrogen production pathway.

Removal of Uranyl Ion from Wastewater by Magnetic Adsorption Material of Polyaniline Combined with CuFe2O4

The magnetic adsorption material of polyaniline (PANI) with amino functional group combined with CuFe2O4 (CuFe2O4/PANI nanocomposite) has been described in this work. It has been characterized by TEM, XRD, XPS, BET, FTIR, and VSM, respectively. Significantly, it exhibits extremely high maximum adsorption capacity (322.6 mg/g) for removal of uranyl ions from wastewater at a pH of 4. The adsorption process is consistent with the quasisecond-order kinetic equation, and the isotherm and kinetic data are accurately described by the Langmuir isothermal adsorption model. Furthermore, the magnetic CuFe2O4/PANI displays stable adsorption performance for uranyl ions after five cycles of recovery in acid medium, which indicates it possesses good recovery due to its magnetism and excellent regeneration ability for reusability.

Heterometallic 3d-4f Complexes as Air-Stable Molecular Precursors in Low Temperature Syntheses of Stoichiometric Rare-Earth Orthoferrite Powders

Four 3d-4f hetero-polymetallic complexes [Fe₂Ln₂((OCH₂)₃CR)₂(O₂C^tBu)₆(H₂O)₄] (where Ln = La (1 and 2) and Gd (3 and 4); and R = Me (1 and 3) and Et (2 and 4)) are synthesized and analyzed using elemental analysis, Fourier transform infrared spectroscopy, thermogravimetric analysis, and SQUID magnetometry. Crystal structures are obtained for both methyl derivatives and show that the complexes are isostructural and adopt a defective dicubane topology. The four heavy metals are connected with two alkoxide bridges. These four precursors are used as single-source precursors to prepare rare-earth orthoferrite pervoskites of the form LnFeO₃. Thermal decomposition in a ceramic boat in a tube furnace gives orthorhombic LnFeO₃ powders using optimized temperatures and decomposition times: LaFeO₃ formed at 650 °C over 30 min, whereas GdFeO₃ formed at 750 °C over 18 h. These materials are structurally characterized using powder X-ray diffraction, Raman spectroscopy, scanning electron microscopy, energy-dispersive X-ray map spectroscopy, and SQUID magnetometry. EDX spectroscopy mapping reveals a homogeneous spatial distribution of elements for all four materials consistent with LnFeO₃. Magnetic measurements on complexes 1-4 confirm the presence of weak antiferromagnetic coupling between the central Fe(III) ions of the clusters and negligible ferromagnetic interaction with peripheral Gd(III) ions in 3 and 4. Zero-field-cooled and field-cooled measurements of magnetization of LaFeO₃ and GdFeO₃ in the solid-state suggest that both materials are ferromagnetic, and both materials show open magnetic hysteresis loops at 5 and 300 K, with M_sat higher than previously reported for these nanomaterials. We conclude that this is a new and facile low temperature route to these important magnetic materials that is potentially universal, limited only by what metals can be programmed into the precursor complexes.

The enhanced photocatalytic activity of g-C3N4-LaFeO3 for the water reduction reaction through a mediator free Z-scheme mechanism

A g-C₃N₄/LaFeO₃ solid–solid interface showing enhanced hydrogen production ability under visible-light irradiation through a mediator free Z-Scheme mechanism.