When the nature of surface functionalities on modified carbon dominates the dispersion of palladium hydrogenation catalysts

High-Temperature Behavior of Laser Electrodispersion-Prepared Pd/ZSM-5 Hydrocarbon Traps under CO Oxidation Conditions

Zeolites and metal-doped zeolites are now widely considered as low-temperature hydrocarbon traps to be a part of emission control systems in automobiles. However, due to the high temperature of exhaust gases, the thermal stability of such sorbent materials is of great concern. To avoid the thermal instability problem, in the present work, laser electrodispersion was used to deposit Pd particles on the surface of ZSM-5 zeolite grains (SiO₂/Al₂O₃ = 55 and SiO₂/Al₂O₃ = 30) to obtain Pd/ZSM-5 materials with a Pd loading as low as 0.03 wt.%. The thermal stability was evaluated in a prompt thermal aging regime involving thermal treatment at temperatures up to 1000 °C in a real reaction mixture (CO, hydrocarbons, NO, an excess of O₂, and balance N₂) and a model mixture of the same composition with the exception of hydrocarbons. Low-temperature nitrogen adsorption and X-ray diffraction analysis were used to examine the stability of the zeolite framework. Special attention was paid to the state of Pd after thermal aging at varied temperatures. By means of transmission electron microscopy, X-ray photoelectron spectroscopy, and diffuse reflectance UV-Vis spectroscopy, it was shown that palladium, having been initially located on the surface of zeolite, undergoes oxidation and migrates into the zeolite's channels. This enhances the trapping of hydrocarbons and their subsequent oxidation at lower temperatures.

Host-induced alteration of the neighbors of single platinum atoms enables selective and stable hydrogenation of butadiene

Tuning the coordination neighbors of the metal center is emerging as an elegant approach to manipulating the performance of supported single-atom catalysts in heterogeneous catalysis. Herein, atomically dispersed Pt species with different coordination neighbors hosted on nitrogen-doped carbon (NC) and graphitic carbon nitride (C₃N₄) are constructed through an impregnation-activation approach. Advanced characterization techniques including X-ray electron microscopy, X-ray absorption spectroscopy, and high angle annular dark-field scanning transmission electron microscopy reveal the different nature of active sites induced by the hosts: i.e., the Pt-N_x configuration in NC but both Pt-N and Pt-O coordinations in C₃N₄. H₂-D₂ exchange experiments and electron microscopy further evidence that Pt/NC exhibits a high propensity for H₂ splitting and high thermal stability of the Pt species against agglomeration, whereas Pt/C₃N₄ cannot dissociate H₂ and the Pt atoms easily aggregate in the reductive stream. Consequently, when applied in the selective hydrogenation of 1,3-butadiene, Pt/NC exhibits higher selectivity to butenes and excellent stability, but Pt/C₃N₄ behaves as a nanoparticle analogue favoring deep hydrogenation. The superior selectivity patterns of the single Pt atoms over Pt nanoparticles are rationalized by the inversed adsorption strength between the H₂ and 1,3-butadiene molecules at different metal sites, which is substantiated by the kinetic studies.

Hydrogenation of Furfural to Furfuryl Alcohol over Ru Particles Supported on Mildly Oxidized Biochar

Catalytic hydrogenation of aldehydes is required as the stabilizing step in bio-oils conversion. Ruthenium supported on carbon was used in the present work for hydrogenation of furfural (FF) to furfuryl alcohol (FA). Converting a biochar with no surface area and low carboxyl groups surface density to an outstanding catalyst support using a very simple mild air/steam oxidation is the original contribution of this work. The mildly oxidized biochar is impregnated with a targeted loading of 2.5 wt.% Ru via ion-exchange, using Ru(NH3)6Cl2 precursor. ICP analysis shows that the mild oxidation increases Ru adsorption capacity of untreated biochar from 1.2 to 2.2 wt.%. H2 chemisorption and TEM analysis indicate that the preliminary mild oxidation leads to higher Ru dispersion. XPS analysis also shows that the treatment prevents Ru from surface segregation. The highest value of 93% FA selectivity at 53% FF conversion was obtained in a batch autoclave reactor under optimized conditions.

Low-Temperature Fast Production of Carbon and Acetic Acid Dual-Promoted Pd/C Catalysts

The Pd/C catalysts are widely used in synthesis of fine chemicals in industry, but their production suffers from a complicated two-step process involving impregnation and reduction, and requires large amounts of solvents and reductant, which would lead to a series of issues such as time consumption, resource waste and environmental pollution. Herein, ultra-small Pd nanoparticles uniformly anchored on carbon nanotubes (Pd/CNTs) were synthesized by using a one-pot and low-temperature reduction strategy. The present process/technology is very sensitive to and controlled by the supports and solvents, and the carbon support and acetic acid synergistically play crucial and decisive roles in the fast production of Pd/C catalysts. Also, the used solvents can be recycled and reutilized, which meets the requirements of sustainable chemistry and green economy. When the as-obtained Pd/CNTs catalyst was used to catalyze the oxidation of benzyl alcohol to benzaldehyde, it achieved a conversion efficiency as high as 99.3 % and a high selectivity up to >99.9 %. The simple, scalable and environmentally friendly strategy can be extended to anchor Pd nanoparticles on various carbon substrates, which sheds a new light on the synthesis of Pd/C catalysts.

Properties of Carbon-supported Precious Metals Catalysts under Reductive Treatment and Their Influence in the Hydrodechlorination of Dichloromethane

This study analyzes the effect of the reduction temperature on the properties of Rh, Pt and Pd catalysts supported on activated carbon and their performance in the hydrodechlorination (HDC) of dichloromethane (DCM). The reduction temperature plays an important role in the oxidation state, size and dispersion of the metallic phase. Pd is more prone to sintering, followed by Pt, while Rh is more resistant. The ratio of zero-valent to electro-deficient metal increases with the reduction temperature, with that effect being more remarkable for Pd and Pt. The higher resistance to sintering of Rh and the higher stability of electro-deficient species under thermal reductive treatment can be attributed to a stronger interaction with surface oxygen functionalities. Dechlorination activity and a TOF increase with reduction temperature (250–450 °C) occurred in the case of Pt/C catalyst, while a great decrease of both was observed for Pd/C, and no significant effect was found for Rh/C. Pt0 represents the main active species for HDC reaction in Pt/C. Therefore, increasing the relative amount of these species increased the TOF value, compensating for the loss of dispersion. In contrast, Pdn+ appears as the main active species in Pd/C and their relatively decreasing occurrence together with the significant decrease of metallic area reduces the HDC activity. Rh/C catalyst suffered only small changes in dispersion and metal oxidation state with the reduction temperature and thus this variable barely affected its HDC activity.