Influence of defects in porous ZnO nanoplates on CO2 photoreduction

Zinc-Acetate-Amine Complexes as Precursors to ZnO and the Effect of the Amine on Nanoparticle Morphology, Size, and Photocatalytic Activity

Zinc oxide is an environmentally friendly and readily synthesized semiconductor with many industrial applications. ZnO powders were prepared by alkali precipitation using different [Zn(acetate)₂(amine)_x] compounds to alter the particle size and aspect ratio. Slow precipitations from 95 °C solutions produced micron-scale particles with morphologies of hexagonal plates, rods, and needles, depending on the precursor used. Powders prepared at 65 °C with rapid precipitation yielded particles with minimal morphology differences, but particle size was dependent on the precursor used. The smallest particles were produced using precursors that yielded crystals with low aspect ratios during high-temperature synthesis. Particles produced during rapid synthesis had sizes ranging from 21-45 nm. The materials were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, thermogravimetric analysis, BET, and diffuse reflectance. The materials prepared using precursors with less-volatile amines were found to retain more organic material than ZnO produced using precursors with more volatile amines. The amount of organic material associated with the nanoparticles influenced the photocatalytic activity of the ZnO, with powders containing less organic material producing faster rate constants for the decolorizing of malachite green solutions under ultraviolet illumination, independent of particle size. [Zn(acetate)₂(hydrazine)₂] produced ZnO with the fastest rate constant and was recycled five times for dye degradation studies that revealed minimal to no reduction in catalytic efficiency.

Recent Advancement of the Current Aspects of g-C3 N4 for its Photocatalytic Applications in Sustainable Energy System

Being one of the foremost enticing and intriguing innovations, heterogeneous photocatalysis has also been used to effectively gather, transform, and conserve sustainable sun's radiation for the production of efficient and clean fossil energy as well as a wide range of ecological implications. The generation of solar fuel-based water splitting and CO₂ photoreduction is excellent for generating alternative resources and reducing global warming. Developing an inexpensive photocatalyst can effectively split water into hydrogen (H₂ ), oxygen (O₂ ) sources, and carbon dioxide (CO₂ ) into fuel sources, which is a crucial problem in photocatalysis. The metal-free g-C₃ N₄ photocatalyst has a high solar fuel generation potential. This review covers the most recent advancements in g-C₃ N₄ preparation, including innovative design concepts and new synthesis methods, and novel ideas for expanding the light absorption of pure g-C₃ N₄ for photocatalytic application. Similarly, the main issue concerning research and prospects in photocatalysts based g-C₃ N₄ was also discussed. The current dissertation provides an overview of comprehensive understanding of the exploitation of the extraordinary systemic and characteristics, as well as the fabrication processes and uses of g-C₃ N₄ .

Boosting light-driven CO2 reduction into solar fuels: Mainstream avenues for engineering ZnO-based photocatalysts

The realization of artificial photosynthesis in the photocatalytic CO₂ transformation into valuable chemicals or solar fuels, such as CO, CH₄, HCOOH, and CH₃OH, by solar-light harvesting is a promising solution to both global-warming and energy-supply issues. Recently, zinc oxide (ZnO) has emerged as an excellent oxidative photocatalyst among non-titanium metal oxides due to its availability, outstanding semiconducting and optical properties, non-toxicity, affordability, and ease of synthesis. However, ZnO wide bandgap and inability to absorb in the visible region has demanded particular modification for its practical use as a sustainable photocatalyst. This review provides a panorama of the latest advancement on ZnO photocatalysis for CO₂ reduction with an overview of fundamental aspects. Various modification strategies such as transition metal and non-metal doping, loading of plasmonic metals, and surface vacancy engineering for tunning the properties and improving the performance of ZnO are elaborated. Composites or hetero-structuralization-based Z-scheme formation is also presented along with a detailed photocatalytic reduction mechanism. Moreover, a new novel Step-scheme (S-scheme) heterostructure modification with a charge transfer pathway mechanism is also highlighted. Finally, the key challenges and new directions in this field are proposed to provide a new vision for further improvement for ZnO-based photocatalytic CO₂ conversion.

Critical Aspects of Metal-Organic Framework-Based Materials for Solar-Driven CO2 Reduction into Valuable Fuels

Photoreduction of CO2 into value-added fuels is one of the most promising strategies for tackling the energy crisis and mitigating the "greenhouse effect." Recently, metal-organic frameworks (MOFs) have been widely investigated in the field of CO2 photoreduction owing to their high CO2 uptake and adjustable functional groups. The fundamental factors and state-of-the-art advancements in MOFs for photocatalytic CO2 reduction are summarized from the critical perspectives of light absorption, carrier dynamics, adsorption/activation, and reaction on the surface of photocatalysts, which are the three main critical aspects for CO2 photoreduction and determine the overall photocatalytic efficiency. In view of the merits of porous materials, recent progress of three other types of porous materials are also briefly summarized, namely zeolite-based, covalent-organic frameworks based (COFs-based), and porous semiconductor or organic polymer based photocatalysts. The remarkable performance of these porous materials for solar-driven CO2 reduction systems is highlighted. Finally, challenges and opportunities of porous materials for photocatalytic CO2 reduction are presented, aiming to provide a new viewpoint for improving the overall photocatalytic CO2 reduction efficiency with porous materials.

Crystal Facet-Dependent CO2 Photoreduction over Porous ZnO Nanocatalysts

Crystal facet engineering provides a promising approach to tailor the performance of catalysts because of the close relationship between the photocatalytic activity and the surface atomic and electronic structures. An in-depth understanding mechanism of crystal facet-dependent CO₂ photoreduction is still an open question. Herein, two different types of porous ZnO nanocatalysts are used as model photocatalysts for the investigation, which are, respectively, with exposed {110} and {001} facets. The porous ZnO with an exposed {110} facet exhibits superior photocatalytic activity to the one with the {001} facet. Various influencing factors have been thoroughly studied both theoretically and/or experimentally, including light harvesting (i.e., band gap), reduction capability (potential of conduction band), crystallinity, CO₂ adsorption ability, CO₂ activation, and charge separation. The major influencing factors are eventually figured out based on the experimental and calculation results. The product selectivity and the influence of the hole scavenger can be explained too. Our work may pave a way for directing the future rational design of efficient photocatalysts for CO₂ reduction.