Effects of annealing conditions on the oxygen evolution activity of a BaTaO2N photocatalyst loaded with cobalt species

Interfacial Design of Particulate Photocatalyst Materials for Green Hydrogen Production

Green hydrogen production using particulate photocatalyst materials has attracted much attention in recent years because this process could potentially lead to inexpensive and scalable solar-to-chemical energy conversion systems. Although the development of efficient particulate photocatalysts enabling one-step overall water splitting (OWS) with solar-to-hydrogen efficiencies in excess of 10 % remains challenging, promising photocatalyst candidates exhibiting OWS activity have been demonstrated. This review provides a comprehensive introduction to the solar-to-hydrogen energy conversion process of semiconductor photocatalyst materials and highlights recent advances in photocatalytic OWS via both one-step and two-step photoexcitation processes. The review also covers recent developments in the photocatalytic OWS of SrTiO3, including the establishment of large-scale photocatalytic systems, interfacial design using cocatalysts to enhance water splitting activity, and its photoelectrochemical (PEC) properties at the electrified solid/liquid interface. In addition, there is a special focus on visible-light-absorbing oxynitride and oxysulfide particulate photocatalysts with absorption edges near 600 nm. Methods for photocatalyst preparation and surface modification, as well as PEC properties, are also discussed. The semiconductor properties of particulate photocatalysts obtained from photoelectroanalytical evaluations using particulate photoelectrodes are evaluated. This review is intended to provide guidelines for the future development of particulate photocatalysts capable of efficient and stable OWS.

Perovskite BaTaO2 N: From Materials Synthesis to Solar Water Splitting

Barium tantalum oxynitride (BaTaO2 N), as a member of an emerging class of perovskite oxynitrides, is regarded as a promising inorganic material for solar water splitting because of its small band gap, visible light absorption, and suitable band edge potentials for overall water splitting in the absence of an external bias. However, BaTaO2 N still exhibits poor water-splitting performance that is susceptible to its synthetic history, surface states, recombination process, and instability. This review provides a comprehensive summary of previous progress, current advances, existing challenges, and future perspectives of BaTaO2 N for solar water splitting. A particular emphasis is given to highlighting the principles of photoelectrochemical (PEC) water splitting, classic and emerging photocatalysts for oxygen evolution reactions, and the crystal and electronic structures, dielectric, ferroelectric, and piezoelectric properties, synthesis routes, and thin-film fabrication of BaTaO2 N. Various strategies to achieve enhanced water-splitting performance of BaTaO2 N, such as reducing the surface and bulk defect density, engineering the crystal facets, tailoring the particle morphology, size, and porosity, cation doping, creating the solid solutions, forming the heterostructures and heterojunctions, designing the photoelectrochemical cells, and loading suitable cocatalysts are discussed. Also, the avenues for further investigation and the prospects of using BaTaO2 N in solar water splitting are presented.

Photodeposition of Fe-Based Cocatalysts Capable of Effectively Promoting the Oxygen Evolution Activity of BaTaO2N

Activation of narrow bandgap photocatalysts is a prerequisite for the efficient production of renewable hydrogen from water using sunlight. Loading of dual cocatalysts intended to promote reduction and oxidation reactions by photodeposition is known to greatly enhance the water splitting activity of certain oxide photocatalysts. However, it is difficult to photodeposit oxygen evolution cocatalysts onto narrow bandgap oxynitride photocatalysts because the driving forces for the necessary oxidation reactions are weak. The present work demonstrates oxidative photodeposition of the Fe-based cocatalyst FeOx onto a Mg-doped BaTaO2N photocatalyst having an absorption edge wavelength of 620 nm. This modification enhances the oxygen evolution activity of the photocatalyst more effectively than conventional impregnation methods. The rapid removal of photoexcited electrons from the photocatalyst by a reduction cocatalyst (Pt) and an electron acceptor (molecular oxygen) are evidently necessary for the photodeposition of the FeOx cocatalyst. A Mg-doped BaTaO2N photocatalyst coloaded with Pt and FeOx exhibits an apparent quantum yield of 1.2% at 420 nm during the oxygen evolution reaction in an aqueous AgNO3 solution. This photodeposition procedure does not involve any heat treatment and so provides new opportunities for the design and construction of oxygen evolution sites on narrow-bandgap non-oxide photocatalysts that may be prone to thermal decomposition.

Nanostructure Engineering and Modulation of (Oxy)Nitrides for Application in Visible-Light-Driven Water Splitting

(Oxy)nitride-based nanophotocatalysts have been extensively investigated for solar-to-chemical conversion, and not only allow wide spectral utilization to achieve high theoretical energy conversion efficiency but also exhibit suitable conduction and valence band positions for robust reduction and oxidation of water. During the past decades, a few reviews on the research progress in designing and synthesizing new visible-light-responsive semiconductors for various applications in solar-to-chemical conversion have been published. However, those on the effects of their bulk and composite (surface/interface) nanostructures on basic processes as well as solar water splitting performances to produce hydrogen are still limited. In this review, a brief introduction on the relationship between the nanostructure photocatalytic properties is included. Three main processes of solar water splitting are involved, allowing the elucidation of the correlation with the nanostructural properties of the photocatalyst such as surface/interface, size, morphology, and bulk structure. Subsequently, the development of methodologies and strategies for modulating the bulk and composite structures to improve the efficiencies of the basic processes, particularly charge separation, is summarized in detail. Finally, the prospects of (oxy)nitride-based photocatalysts such as controlled synthesis, modulation of 1D/2D morphology, exposed facet regulation, heterostructure formation, theoretical simulation, and time- and space-resolved spectroscopy are discussed.

Recent advances in Cu2O-based composites for photocatalysis: a review

Cu₂O-based composites for photocatalysis have been extensively explored owing to their promising application in solving environmental and energy problems. At present, the research on photocatalysis is focused on improving the photocatalytic performance of materials. It has been reported that adjusting the morphology and size of Cu₂O can effectively improve its photocatalytic property. However, photocorrosion is still an inevitable problem, which hinders the application of Cu₂O in photocatalysis. The strategies of constructing heterogeneous nanostructures and ion doping can significantly improve the light stability, light absorption capacity and separation efficiency of electron-hole pairs. Cu₂O-based composites exhibit superior performances in degrading organic matter, producing hydrogen, reducing CO₂ and sterilization. Therefore, the construction of multi-materials will be one of the future directions in their photocatalytic application. This review summarizes the recent strategies for enhancing the photocatalytic activity of Cu₂O by analyzing different Cu₂O-based photocatalysts, and the charge transfer pathway is further discussed in detail. Finally, several opportunities and challenges in the field of photocatalysis are illustrated.