Effects of alkali promoters on tri-metallic Co-Ni-Cu-based perovskite catalyst for higher alcohol synthesis from syngas

Selective syngas fermentation to acetate under acidic and psychrophilic conditions using mixed anaerobic culture

Syngas fermentation to acetate offers a promising solution for its valorisation, particularly when syngas contains a high N2 concentration, which otherwise impedes the utilisation of syngas biomethanation gaseous product in cogeneration or upgrading units. In this study, continuous lab-scale syngas fermentation assessing the effects of acidic pH and psychrophilic conditions (28 °C and 20 °C) on bioconversion efficiency and anaerobic consortium diversity was studied. The results showed that as temperature and pH decrease, acetate yield increases. The highest H2 and CO consumption rates were observed at 20 °C and pH 4.5, reaching 48.4 mmol/(L·d) and 31.5 mmol/(L·d), respectively, and methanogenic activity was not completely suppressed. The microbial community composition indicated an enhanced abundance of acetate-producing bacteria and hydrogenotrophic methanogens at 28 °C. The PICRUSt2 prediction of metabolic potential indicated that temperature and pH changes appear to have a more pronounced impact on acetotrophic methanogenesis genes than carbon dioxide-based methanogenesis genes.

Biological conversion of carbon monoxide and hydrogen by anaerobic culture: Prospect of anaerobic digestion and thermochemical processes combination

Waste biomass is considered a promising renewable energy feedstock that can be converted by anaerobic digestion. However, anaerobic digestion application can be challenging due to the structural complexity of several waste biomass kinds. Therefore, coupling anaerobic digestion with thermochemical processes can offset the limitations and convert the hardly biodegradable waste biomass, including digestate residue, into value-added products: syngas and pyrogas (gaseous mixtures consisting mainly of H₂, CO, CO₂), bio-oil, and biochar for further valorisation. In this review, the utilisation boundaries and benefits of the aforementioned products by anaerobic culture are discussed. First, thermochemical process parameters for an enhanced yield of desired products are summarised. Particularly, the microbiology of CO and H₂ mixture biomethanation and fermentation in anaerobic digestion is presented. Finally, the state-of-the-art biological conversion of syngas and pyrogas to CH₄ mediated by anaerobic culture is adequately described. Extensive research shows the successful selective biological conversion of CO and H₂ to CH₄, acetic acid, and alcohols. The main bottleneck is the gas-liquid mass transfer which can be enhanced appropriately by bioreactors' configurations. A few research groups focus on bio-oil and biochar addition into anaerobic digesters. However, according to the literature review, there has been no research for utilising all value-added products at once in anaerobic digestion published so far. Although synergic effects of such can be expected. In summary, the combination of anaerobic digestion and thermochemical processes is a promising alternative for wide-scale waste biomass utilisation in practice.

Influence of Carbon Content in Ni-Doped Mo2C Catalysts on CO Hydrogenation to Mixed Alcohol

Herein, we synthesize the Ni-doped Mo2C catalysts by a one-pot preparation method to illuminate the effect of the number of carbon atoms in Mo2C lattice on CO hydrogenation to mixed alcohol. The Ni doping inhibits the agglomeration of Mo2C crystals into large particles and the surface carbon deposition, which increase the active surface area. In addition, the interaction between Ni and Mo increases the electron cloud density of Mo species and promotes the non-dissociative adsorption and insertion of CO. Especially, our results indicate that with the increase of the nickel content, the number of carbon atoms in Mo2C lattice on the surface of the catalyst shows a volcano type variation. The low carbon content induces the formation of coordination unsaturated molybdenum species which exhibit the higher catalytic activity and mixed alcohol selectivity than other molybdenum species. Among the catalysts, the MC-Ni-1.5 catalyst with Ni/Mo molar ratio of 1.5:8.5, which has the largest amount of coordination unsaturated molybdenum species, shows the highest space-time yield of mixed alcohols, which is three times higher than that of the Mo2C catalyst.

Recent advances in the direct conversion of syngas to oxygenates

Direct synthesis of oxygenates from syngas is a promising way to utilize non-petroleum carbon resources because the oxygenate products serve as precursors for the downstream production of fuels and value-added chemicals.

CuCo alloy nanonets derived from CuCo2O4 spinel oxides for higher alcohols synthesis from syngas

Porous CuCo alloy nanonets were used as superior catalysts for higher alcohol synthesis from syngas. The catalyst was fabricated via structural topological transformation of CuCo2O4 spinel precursor.