Development of structured Co3O4-based catalyst for N2O removal from hospital ventilation systems

Influence of Co3O4-based catalysts on N2O catalytic decomposition and NO conversion

This study investigated the effect of different Co₃O₄-based catalysts on the catalytic decomposition of nitrous oxide (N₂O) and on nitric oxide (NO) conversion. The experiments were carried out using various reaction temperatures, alkaline solutions, pH, mixing conditions, aging times, space velocities, impregnation loads, and compounds. The results showed that Co₃O₄ catalysts prepared by precipitation methods have the highest catalytic activity and N₂O conversion, even at low reaction temperatures, while the commercial nano and powder forms of Co₃O₄ (CS) have the lowest performance. The catalysts become inactive at temperatures below 400 °C, and their activity is strongly influenced by the mixing temperature. Samples without stirring during the aging process have higher catalytic activity than those with stirring, even at low reaction temperatures (200-300 °C). The catalytic activity of Co₃O₄ PM1 decreases with low W/F values and low reaction temperatures. Additionally, the catalyst's performance tends to increase with the reduction process. The study suggests that cobalt-oxide-based catalysts are effective in N₂O catalytic decomposition and NO conversion. The findings may be useful in the design and optimization of catalytic systems for N₂O and NO control. The results obtained provide important insights into the development of highly efficient, low-cost, and sustainable catalysts for environmental protection.

Engineering Co Vacancies for Tuning Electrical Properties of p-Type Semiconducting Co3O4 Films

Spinel oxide Co₃O₄ has attracted more and more attention for energy- and environment-related applications. In order to tune the electrical properties of Co₃O₄, p-type semiconducting Co₃O₄ films were fabricated on the Pb(Mg_1/3Nb_2/3)_0.7Ti_0.3O₃ (PMN-PT), MgAl₂O₄ (MAO), and SrTiO₃ substrates by reactive magnetron sputtering. The Co₃O₄ film on the MAO substrate exhibits perfect epitaxial growth. However, the Co₃O₄ film on the PMN-PT substrate presents dislocation defects between the [011] and [112] orientations. The special ferroelectric domain shape surface and phase transition of the PMN-PT substrate induce the higher concentration of Co vacancies in the Co₃O₄ film, which further reduce the resistivity by several orders of magnitude. The calculated results indicate that introducing Co vacancies can enhance the electrical properties of Co₃O₄ by building impurity levels near the Fermi level, which is beneficial to form free-moving holes in the valence band. The free-moving holes can also be accumulated/dissipated by the ferroelectric field effect of PMN-PT substrates, leading to upward/downward bending of conduction, valence bands, and low/high-resistance states. This work helps us to tune and improve the electrical properties of Co₃O₄.

Atomic-Level Dispersion of Bismuth over Co3O4 Nanocrystals—Outstanding Promotional Effect in Catalytic DeN2O

A series of cobalt spinel catalysts doped with bismuth in a broad range of 0–15.4 wt % was prepared by the co-precipitation method. The catalysts were thoroughly characterized by several physicochemical methods (X-ray fluorescence spectroscopy (XRF), X-ray diffraction (XRD), Raman spectroscopy (µRS), X-ray photoelectron spectroscopy (XPS), nitrogen adsorption analyzed with Brunaer-Emmett-Teller theory (N2-BET), work function measurements (WF)), as well as aberration-corrected scanning transmission electron microscopy (STEM) coupled with energy-dispersive X-ray spectroscopy (EDX) and electron energy-loss spectroscopy (EELS). The optimal bismuth promoter content was found to be 6.6 wt %, which remarkably enhanced the performance of the cobalt spinel catalyst, shifting the N2O decomposition (deN2O) temperature window (T50%) down from approximately 400 °C (for Co3O4) to 240 °C (for the 6.6 wt % Bi-Co3O4 catalyst). The high-resolution STEM images revealed that the high activity of the 6.6 wt % Bi-Co3O4 catalyst can be associated with an even, atomic-level dispersion (3.5 at. nm−2) of bismuth over the surface of cobalt spinel nanocrystals. The improvement in catalytic activity was accompanied by an observed increase in the work function. We concluded that Bi promoted mostly the oxygen recombination step of a deN2O reaction, thus demonstrating for the first time the key role of the atomic-level dispersion of a surface promoter in deN2O reactions.

Bulk, Surface and Interface Promotion of Co3O4 for the Low-Temperature N2O Decomposition Catalysis

Nanocrystalline cobalt spinel has been recognized as a very active catalytic material for N2O decomposition. Its catalytic performance can be substantially modified by proper doping with alien cations with precise control of their loading and location (spinel surface, bulk, and spinel-dopant interface). Various doping scenarios for a rational design of the optimal catalyst for low-temperature N2O decomposition are analyzed in detail and the key reactivity descriptors are identified (content and topological localization of dopants, their redox vs. non-redox nature and catalyst work function). The obtained results are discussed in the broader context of the available literature data to establish general guidelines for the rational design of the N2O decomposition catalyst based on a cobalt spinel platform.