Development of polyethylenimine (PEI)-impregnated mesoporous carbon spheres for low-concentration CO2 capture

Utilizing Gelatin Waste for Efficient Bimodal Porous Silica Adsorbents for Carbon Dioxide Capture

This study explores the modification of pore structures in porous silica materials synthesized using sodium silicate and waste gelatin, under varying silica-to-gelatin ratios. At ratios of 1.0-1.5, bimodal porous silica with mesopores and macropores emerged due to spaces between silica nanoparticles and clusters, following gelatin elimination. The study further evaluated the obtained bimodal porous silica as polyethyleneimine (PEI) supports for CO2 capture, alongside PEI-loaded unimodal porous silica and hollow silica sphere for comparison. Notably, the PEI-loaded bimodal silica showcased superior CO2 uptake, achieving 145.6 mg g-1 at 90 °C. Transmission electron microscopy (TEM) revealed PEI's uniform distribution within the pores of bimodal silica, unlike the excessive surface layering seen in unimodal silica. Conversely, PEI completely filled the hollow porous silica's interior, extending gas molecule diffusion distance. All sorbents displayed nearly constant CO2 adsorption across 20 cycles, demonstrating outstanding stability. Notably, the bimodal porous silica displayed a negligible capacity loss, underscoring its robust performance.

Development of composite amine functionalized polyester microspheres for efficient CO2 capture

In order to reduce the impact of greenhouse gases on the environment, the development of various new CO2 capture materials has become a hot spot. In this work, a novel composite amine solid adsorbent was prepared by simultaneously using tetraethylenepentamine (TEPA) and 2-[2-(dimethylamino) ethoxy] ethanol (DMAEE) for amine functionalization on the polyester microsphere carrier. The introduction of methyl methacrylate (MMA) with high glass transition temperature into the polyester carrier makes the carrier microspheres have high hardness. At the same time, the carrier also contains active epoxy groups and hydrophobic glycidyl methacrylate (GMA, which can undergo ring-opening reaction with composite amines to achieve high-load and low-energy chemical grafting of amines on the carrier. The composite aminated polyester microspheres were used as an efficient adsorbent for CO2 in simulated flue gas. The results show that the synergistic effect of TEPA-DMAEE composite amine system in the adsorbent is beneficial to the improvement of CO2 capture capacity. When the total amine content in the impregnating solution is 45 wt% and the composite amine ratio is TEPA: DMAEE = 6: 4, the CO2 adsorption capacity can reach the optimal value of 2.45 mmol/ g at 70 °C. In addition, the composite amine microsphere adsorbent has cyclic regeneration performance. Importantly, through kinetic fitting, the Avrami kinetic model fits the CO2 adsorption better than the quasi-first-order and quasi-second-order kinetic models, which proves that physical adsorption and chemical adsorption coexist in the adsorption process. This simple, long-term stable and excellent selective separation performance makes amine-functionalized adsorbents have potential application prospects in CO2 capture.

Insights into the Critical Role of Abundant-Porosity Supports in Polyethylenimine Functionalization as Efficient and Stable CO2 Adsorbents

The emerging polyethylenimine (PEI)-functionalized solid adsorbents have witnessed significant development in the implementation of CO₂ capture and separation because of their decent adsorption capacity, recyclability, and scalability. As an indispensable substrate, the importance of selecting porous solid supports in PEI functionalization for CO₂ adsorption was commonly overlooked in many previous investigations, which instead emphasized screening amine types or developing complex porous materials. To this end, we scrutinized the critical role of different commercial porous supports (silica, alumina, activated carbon, and polymeric resins) in PEI impregnation in this study, taking into account multiple perspectives. Hereinto, the present results identified that abundant larger pore structures and surface functional groups were conducive to loading a considerable amount of PEI molecules. Various supports after PEI functionalization had great differences in adsorption capacities, amine efficiencies, and the corresponding optimal temperatures. In addition, more attention was paid to the role of porous supports in long-term stability during the consecutive adsorption-regeneration cycles, while N₂ and CO₂ purging as regeneration strategies, respectively. Especially, CO₂-induced degradation due to urea species formation was specifically recognized in a SiO₂-based adsorbent, which would induce serious concerns in CO₂ cyclic capture. On the other side, we also confirmed that adopting conventional porous supports, for example, HP20, could achieve superior adsorption performance (above 4 mmol CO₂/g) and cyclic stability (around 1% loss after 30 cycles) rather than the ones synthesized through complex approaches, which ensured the availability and scalability of PEI-functionalized CO₂ adsorbents.

A review on application of activated carbons for carbon dioxide capture: present performance, preparation, and surface modification for further improvement

The atmosphere security and regulation of climate change are being continuously highlighted as a pressing issue. The crisis of climate change owing to the anthropogenic carbon dioxide emission has led many governments at federal and provincial levels to promulgate policies to address this concern. Among them is regulating the carbon dioxide emission from major industrial sources such as power plants, petrochemical industries, cement plants, and other industries that depend on the combustion of fossil fuels for energy to operate. In view of this, various CO2 capture and sequestration technologies have been investigated and presented. From this review, adsorption of CO2 on porous solid materials has been gaining increasing attention due to its cost-effectiveness, ease of application, and comparably low energy demand. Despite the myriad of advanced materials such as zeolites, carbons-based, metal-organic frameworks, mesoporous silicas, and polymers being researched, research on activated carbons (ACs) continue to be in the mainstream. Therefore, this review is endeavored to elucidate the adsorption properties of CO2 on activated carbons derived from different sources. Selective adsorption based on pore size/shape and surface chemistry is investigated. Accordingly, the effect of surface modifications of the ACs with NH3, amines, and metal oxides on adsorption performance toward CO2 is evaluated. The adsorption performance of the activated carbons under humid conditions is also reviewed. Finally, activated carbon-based composite has been surveyed and recommended as a feasible strategy to improve AC adsorption properties toward CO2. The activated carbon surface in the graphical abstract is nitrogen rich modified using ammonia through thermal treatment. The values of CO2 emissions by sources are taken from (Yoro and Daramola 2020).

Nanoparticles of Quaternary Ammonium Polyethylenimine Derivatives for Application in Dental Materials

Various quaternary ammonium polyethylenimine (QA-PEI) derivatives have been synthesized in order to obtain nanoparticles. Due to their antibacterial activity and non-toxicity towards mammalian cells, the QA-PEI nanoparticles have been tested extensively regarding potential applications as biocidal additives in various dental composite materials. Their impact has been examined mostly for dimethacrylate-based restorative materials; however, dental cements, root canal pastes, and orthodontic adhesives have also been tested. Results of those studies showed that the addition of small quantities of QA-PEI nanoparticles, from 0.5 to 2 wt.%, led to efficient and long-lasting antibacterial effects. However, it was also discovered that the intensity of the biocidal activity strongly depended on several chemical factors, including the degree of crosslinking, length of alkyl telomeric chains, degree of N-alkylation, degree of N-methylation, counterion type, and pH. Importantly, the presence of QA-PEI nanoparticles in the studied dental composites did not negatively impact the degree of conversion in the composite matrix, nor its mechanical properties. In this review, we summarized these features and functions in order to present QA-PEI nanoparticles as modern and promising additives for dental materials that can impart unique antibacterial characteristics without deteriorating the products' structures or mechanical properties.