Surface modification of macroporous La0.8Sr0.2CoO3 perovskite oxides integrated monolithic catalysts for improved propane oxidation

The Surface/Interface Modulation of Platinum Group Metal (PGM)-Free Catalysts for VOCs and CO Catalytic Oxidation

Effective management of volatile organic compounds (VOCs) and carbon monoxide (CO) is critical to human health and the ecological environment. Catalytic oxidation is one of the most promising technologies for achieving efficient VOCs and CO emission control. Platinum group metal (PGM)-free catalysts are recently receiving sustainable attention in catalyzing VOCs and CO removal due to their low cost, superior catalytic activity, and excellent stability, but PGM-free catalysts face challenges in low-temperature catalytic efficiency. In this mini-review, starting with discussing the catalytic mechanism of VOCs and CO oxidation, we summarize the surface/interface modulation strategies of PGM-free catalysts to promote oxygen and VOCs/CO molecule activation for enhanced low-temperature oxidation activity, including oxygen vacancy engineering, heteroatom doping, surface acidity modification, and active interface construction. We highlight the currently remaining challenges and prospects of advanced PGM-free catalyst development for highly efficient VOCs and CO emission control in practical applications.

Highly Reactive Peroxide Species Promoted Soot Oxidation over an Ordered Macroporous Ce0.8Zr0.2O2 Integrated Catalyzed Diesel Particulate Filter

Particulate matter, represented by soot particles, poses a significant global environmental threat, necessitating efficient control technology. Here, we innovatively designed and elaborately fabricated ordered hierarchical macroporous catalysts of Ce0.8Zr0.2O2 (OM CZO) integrated on a catalyzed diesel particulate filter (CDPF) using the self-assembly method. An oxygen-vacancy-enriched ordered macroporous Ce0.8Zr0.2O2 catalyst (VO-OM CZO) integrated CDPF was synthesized by subsequent NaBH4 reduction. The VO-OM CZO integrated CDPF exhibited a markedly enhanced soot oxidation activity compared to OM CZO and powder CZO coated CDPFs (T50: 430 vs 490 and 545 °C, respectively). The well-defined OM structure of the VO-OM CZO catalysts effectively improves the contact efficiency between soot and the catalysts. Meanwhile, oxygen vacancies trigger the formation of a large amount of highly reactive peroxide species (O22-) from molecular oxygen (O2) through electron abstraction from the three adjacent Ce3+ (3Ce3+ + Vö + O2 → 3Ce4+ + O22-), contributing to the efficient soot oxidation. This work demonstrates the fabrication of the ordered macroporous CZO integrated CDPF and reveals the importance of structure and surface engineering in soot oxidation, which sheds light on the design of highly efficient PM capture and removal devices.

Ozone catalytic oxidation of toluene over triple perovskite-type catalysts modified with KMnO4

A unique triple perovskite-type catalyst was successfully synthesized using the simple sol-gel approach, and surface acid modification was added to improve the ozone catalytic oxidation (OZCO) process ability to remove toluene more effectively. Our study indicates that La3MnCuNiO9 catalyst treated with KMnO4 shows the best toluene oxidation activity. At 250 °C, the rates of conversion and mineralization were 100% and 83%, respectively, under thermal catalytic system when C7H8 concentration = 500 ppm. During the OZCO system ([C7H8] = 20 ppm, O3/C7H8=8; room temperature), for 6 h, the conversion rate remained at 100%. The high ratios of Mn4+/(Mn4++Mn3+), Cu2+, and abundant surface oxygen species, high specific surface area, and pore volume lead to remarkable catalytic performance of this catalyst. Meanwhile, the catalyst contributes to superior stability and water resistance. The catalytic mechanism of La3MnCuNiO9 after KMnO4 treatment in the context of OZCO was further discussed. Overall, after KMnO4 treatment, the La3MnCuNiO9 catalyst reveals extraordinary catalytic activity and excellent stability combination of this catalyst with ozone exhibits high toluene removal efficiency in the OZCO system and has a good potential for industrial applications.

Effect of acid/alkali treatment on the structure and catalytic performance of 3DOM CeCo0.7Mn0.3O3 catalyst

In this work, Ce was used as the A-site element and three-dimensional ordered macroporous (3DOM) materials as the template to obtain 3DOM CeCo0.7Mn0.3O3 catalyst via excessive impregnation method. The catalyst was subjected to acid/alkali treatment with dilute nitric acid and sodium hydroxide solutions. The results revealed that the catalysts subjected to acid/alkali treatment exhibited better structural and catalytic activity characteristics than the bulk catalyst. Specifically, the specific surface area of the catalyst treated with acid increased from 34.86 to 60.67 m2·g-1, and the relative contents of Oads and Mn4+ species increased. Moreover, the T90% further decreased to 174 °C. As for the catalyst treated with alkali, it exhibited a rougher surface and a wider pore size distribution, producing more lattice defects which were favorable for reaction progress. The T90% was 183 °C, indicating that acid/alkali treatment both had a positive effect on the catalytic oxidation of toluene.

Effect of B-Site Element on the Structure and Catalytic Performance for Toluene of the 3DOM CeBO3 Catalyst

A series of 3DOM cerium-based perovskite catalysts with different B-site elements were prepared by the colloidal crystal template method and excess impregnation method with Cr, Ni, and Mn as the B-site elements. The physical and chemical properties of the catalysts were investigated by X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), hydrogen temperature-programmed reduction (H₂-TPR), and oxygen temperature-programmed desorption (O₂-TPD) characterization techniques. The results showed that the catalyst with Mn as the B-site element had a high-quality macropore structure (pore size 200-250 nm), large specific surface area (45.26 m²/g), and abundant surface adsorbed oxygen content (O_ads/O_latt = 0.46). The addition of manganese enhanced the low-temperature reducibility, and the main reduction peak was below 400 °C. The O₂-TPD results showed that 3DOM CeMnO₃ expressed the highest adsorption oxygen content. The 3DOM CeMnO₃ possessed the best catalytic performance with T_50% = 102 °C and T_90% = 203 °C during the catalytic oxidation of toluene. Intermediate product study hinted that toluene was first converted into benzoic acid and benzaldehyde and then further degraded into small molecules. The catalyst with the best activity also exhibited good stability, and toluene degradation rate remained above 85% at 200°C for more than 20 h of continuous experiments.

Recent Advances in Perovskite Catalysts for Efficient Overall Water Splitting

Hydrogen is considered a promising clean energy vector with the features of high energy capacity and zero-carbon emission. Water splitting is an environment-friendly and effective route for producing high-purity hydrogen, which contains two important half-cell reactions, namely, the anodic oxygen evolution reaction (OER) and the cathodic hydrogen evolution reaction (HER). At the heart of water splitting is high-performance electrocatalysts that efficiently improve the rate and selectivity of key chemical reactions. Recently, perovskite oxides have emerged as promising candidates for efficient water splitting electrocatalysts owing to their low cost, high electrochemical stability, and compositional and structural flexibility allowing for the achievement of high intrinsic electrocatalytic activity. In this review, we summarize the present research progress in the design, development, and application of perovskite oxides for electrocatalytic water splitting. The emphasis is on the innovative synthesis strategies and a deeper understanding of structure–activity relationships through a combination of systematic characterization and theoretical research. Finally, the main challenges and prospects for the further development of more efficient electrocatalysts based on perovskite oxides are proposed. It is expected to give guidance for the development of novel non-noble metal catalysts in electrochemical water splitting.

Perovskite Catalyst for In-Cylinder Coating to Reduce Raw Pollutant Emissions of Internal Combustion Engines

Aiming to achieve the highest combustion efficiency and less pollutant emission, a catalytic coating for cylinder walls in internal combustion engines was developed and tested under several conditions. The coating consists of a La_0.8Sr_0.2CoO₃ (LSCO) catalyst on an aluminum-based ceramic support. Atomic force microscopy was applied to investigate the surface roughness of the LSCO coating, while in situ diffuse infrared Fourier transform spectroscopy was used to obtain the molecular understanding of adsorption and conversion. In addition, the influence of LSCO-coated substrates on the flame quenching distance was studied in a constant-volume combustion chamber. Investigations conclude that an LSCO coating leads to a reduction of flame quenching at low wall temperatures but a negligible effect at high temperatures. Finally, the influence of LSCO coatings on the in-cylinder wall-near gas composition was investigated using a fast gas sampling methodology with sample durations below 1 ms. Ion molecule reaction mass spectrometry and Fourier transform infrared spectroscopy revealed a significant reduction of hydrocarbons and carbon monoxide when LSCO coating was applied.