Solvothermal synthesis of BiOBr photocatalyst with an assistant of PVP for visible-light-driven photocatalytic degradation of fluoroquinolone antibiotics

Preparation of PVP-BiOBr Adsorbent for Efficient Indigo Carmine Dye Removal Using Flow-Circulation Systems

This work presents an adsorptive removal of indigo carmine (IC) dye using a polyvinylpyrrolidone capped bismuth oxybromide (PVP-BiOBr) adsorbent. PVP-BiOBr was synthesized via a simple precipitation method. The morphology and surface chemical structure of the adsorbent were characterized using XRD, SEM, FTIR, and BET analyses. The adsorption isotherm and kinetics were investigated to reveal the mechanism of dye removal. Prepared PVP-BiOBr has a crystallite size of 19.7 nm, with a mean particle size of ∼2 μm and a surface area of 5.14 m2 g-1. The optimum pH for this adsorptive process spanned the range of 4 to 9. Experimental data indicated applicability of the Langmuir isotherm model, and the study confirms a pseudo-second-order kinetics model. The maximum adsorption capacity for IC dye was 208.3 mg g-1. A flow-circulation system was developed for the treatment of IC dye contaminated water samples. PVP-BiOBr was packed inside a column and did not spill into the water sample after treatment. The removal efficiency was ≥90% after 25 min. The PVP-BiOBr adsorbent could be reused for three cycles. This work demonstrates that PVP-BiOBr is a promising candidate as an adsorbent for IC dye removal. Additionally, the flow-based system establishes an automated operation in continuous mode, which is viable for large scale applications.

Recent advances in visible light-activated photocatalysts for degradation of dyes: A comprehensive review

The rapid development in industrialization and urbanization coupled with an ever-increasing world population has caused a tremendous increase in contamination of water resources globally. Synthetic dyes have emerged as a major contributor to environmental pollution due to their release in large quantities into the environment, especially owing to their high demand in textile, cosmetics, clothing, food, paper, rubber, printing, and plastic industries. Photocatalytic treatment technology has gained immense research attention for dye contaminated wastewater treatment due to its environment-friendliness, ability to completely degrade dye molecules using light irradiation, high efficiency, and no generation of secondary waste. Photocatalytic technology is evolving rapidly, and the foremost goal is to synthesize highly efficient photocatalysts with solar energy harvesting abilities. The current review provides a comprehensive overview of the most recent advances in highly efficient visible light-activated photocatalysts for dye degradation, including methods of synthesis, strategies for improving photocatalytic activity, regeneration and their performance in real industrial effluent. The influence of various operational parameters on photocatalytic activity are critically evaluated in this article. Finally, this review briefly discusses the current challenges and prospects of visible-light driven photocatalysts. This review serves as a convenient and comprehensive resource for comparing and studying the fundamentals and recent advancements in visible light photocatalysts and will facilitate further research in this direction.

Shape-dependent synthesis and photocatalytic degradation by Cu2O nanocrystals: Kinetics and photocatalytic mechanism

In this study, Cu2O crystals with different morphologies were synthesized to investigate the effect of exposed crystalline facets on photocatalytic degradation efficiency. By adjusting the addition amount of PVP, different morphologies of Cu2O crystals were obtained, such as cubic, decahedral, octahedral, etc. XRD, SEM, and TEM characterizations were used to observe the properties of the synthesized Cu2O in terms of morphology, size, and lattice structure. The results showed that the octahedral cuprous oxide had the strongest photocatalytic degradation effect (78.3%). The study also explored the connection between different crystalline facets and MO microstructure, and the effect of crystalline facet selectivity on the pre-absorption and photocatalytic degradation of MO. Density Functional Theory (DFT) calculations were used to investigate the connection between the energy level structure of different crystalline facets of Cu2O and its photocatalytic activity. Finally, based on the experimental analysis and theoretical calculation, a new charge separation model on crystalline surface was proposed.

Applications of BiOX in the Photocatalytic Reactions

BiOX (X = Cl, Br, I) families are a kind of new type of photocatalysts, which have attracted the attention of more and more researchers. The suitable band gaps and their convenient tunability via the change of X elements enable BiOX to adapt to many photocatalytic reactions. In addition, because of their characteristics of the unique layered structure and indirect bandgap semiconductor, BiOX exhibits excellent separation efficiency of photogenerated electrons and holes. Therefore, BiOX could usually demonstrate fine activity in many photocatalytic reactions. In this review, we will present the various applications and modification strategies of BiOX in photocatalytic reactions. Finally, based on a good understanding of the above issues, we will propose the future directions and feasibilities of the reasonable design of modification strategies of BiOX to obtain better photocatalytic activity toward various photocatalytic applications.

Optoelectronic Memristive Synapse Behavior for the Architecture of Cu2ZnSnS4@BiOBr Embedded in Poly(methyl methacrylate)

The great potential of artificial optoelectronic devices that are capable of mimicking biosynapse functions in brain-like neuromorphic computing applications has aroused extensive interest, and the architecture design is decisive yet challenging. Herein, a new architecture of p-type Cu₂ZnSnS₄@BiOBr nanosheets embedded in poly(methyl methacrylate) (PMMA) films (CZTS@BOB-PMMA) is presented acting as a switching layer, which not only shows the bipolar resistive switching features (SET/RESET voltages, ∼ -0.93/+1.35 V; retention, >10⁴ s) and electrical- and near-infrared light-induced synapse plasticity but also demonstrates electrical-driven excitatory postsynaptic current, spiking-time-dependent plasticity, paired pulse facilitation, long-term plasticity, long- and short-term memory, and "learning-forgetting-learning" behaviors. The approach is a rewarding attempt to broaden the research of optoelectric controllable memristive devices for building neuromorphic architectures mimicking human brain functionalities.

Construction of a Z-scheme Ag2MoO4/BiOBr heterojunction for photocatalytically removing organic pollutants

How to facilitate photogenerated-carrier separation is an important step in developing excellent semiconductor photocatalysts for environmental pollutant removal. Herein, Ag₂MoO₄ (AMO) nanoparticles were assembled onto the surface of BiOBr (BOB) nanosheets to construct a highly efficient Z-scheme AMO/BOB heterojunction photocatalyst. Several analytical techniques were used to elucidate the characteristics and photocatalytic mechanism of the AMO/BOB heterojunction. Photodegradation experiments for removing methylene blue under simulated-sunlight irradiation reveal that a 20%AMO/BOB heterojunction exhibits excellent photodegradation activity with η(30 min) = 93.8% and k_app = 0.08638 min^-1, which were greater by 4.5 and 5.6 times in comparison with that of pure BOB and AMO, respectively. Based on the experimental and density functional theory (DFT) calculation results, it is proposed that the Z-scheme carrier transfer/separation mechanism dominates the enhanced photodegradation performance of the composite photocatalysts. Additionally, the potential application of AMO/BOB photocatalysts in degrading various organic pollutants (including organic dyes, antibiotics and other serious organic pollutants) was also investigated.

Panax notoginseng powder -assisted preparation of carbon-quantum-dots/BiOCl with enriched oxygen vacancies and boosted photocatalytic performance

Low activity of photocatalysts is a serious bottleneck to the practical application of photocatalytic technology. In this paper, a series of BiOCl composite photocatalysts containing carbon quantum dots (CQDs) were successfully prepared by adding Panax notoginseng powder (PNP) to the solvothermal synthesis system of BiOCl as a template agent and a raw material for 0D CQDs. CQDs/BiOCl exhibit 2D flake structures and 3D flower-like microspheres self-assembled from thin flakes, holding rich oxygen vacancies (OVs). After detailed characterization, it was found that the amount of OVs on BiOCl could be regulated according to the amount of PNP added. The CQDs/OVs-BiOCl photocatalysts exhibit higher photogenerated charge separation efficiency and photocatalytic activity than the bare BiOCl. When the mass ratio of PNP/BiOCl is 1.0%, the photocatalyst demonstrates the maximum degradation activity for rhodamine B (RhB) and perfluorooctanoic acid (PFOA). In view of the solid observations, a photocatalytic enhancement mechanism of CQDs/BiOCl was elucidated.

Hydrothermal Synthesis of Cadmium Sulfide Photocatalyst for Detoxification of Azo Dyes and Ofloxacin Antibiotic in Wastewater

The complete detoxification of harmful dyes and antibiotics from aqueous solution is essential for environmental remediation. The present work focuses on a facile hydrothermal synthesis of a cadmium sulfide (CdS) photocatalyst using thioacetamide as a sulfur source. The synthesized CdS showed a hexagonal phase with an energy gap of 2.27 eV, suggesting the promising visible-light-responsive semiconducting photocatalyst. The photoactivity of the prepared CdS was investigated by evaluating the degradation of the Reactive red 141 (RR141) dye, Congo red (CR) dye, and ofloxacin (OFL) antibiotic. After only 180 min of solar light illumination, a high performance of 98%, 97%, and 87% toward degradation of RR141, CR, and OFL was obtained. The photodegradation of the pollutants agrees well with the first-order kinetic model. The rate constant of 0.055 min^-1, 0.040 min^-1, and 0.026 min^-1, respectively, was reported toward degradation of RR141, CR, and OFL. Photogenerated holes and hydroxyl radicals play a vital role in removing toxic organic contaminants. The chemical stability of the prepared CdS was also confirmed. The synthesized CdS photocatalyst still maintains high photocatalytic performance even after five consecutive cycles of use, indicating its excellent cycling ability. The present research shows a facile route to fabricate a CdS photocatalyst to completely detoxify harmful organic pollutants, including dyes and antibiotics, in the environment.

A review on bismuth-based materials for the removal of organic and inorganic pollutants

Modernized lifestyle and increased industrialization threaten living organisms because of the pollutants released from industries and household wastes. The presence of even small amounts of pollutants (organic pollutants (OPs) and inorganic pollutants-heavy metals (HMs)) shows significant effects. Thus wastewater treatment is urgently needed before being subjected to use. Many methods and materials have been developed and reported for the removal of pollutants from wastewater. This review focused on the removal of both OPs and HMs using bismuth-based (Bi-based) materials because of their low toxicity and excellent properties compared to other metals. Bi-based materials as a photocatalyst for photodegradation of OPs are discussed in detail with synthesis methods. Further, since few reviews are available on the Bi-based material for the removal and sensing of HMs, this topic was intentionally summarized. About 200 published articles and reviews have been reviewed here. Additionally, the key point that needs to be focused on the development of Bi-based photocatalysts for the removal of OPs and for upgrading the Bi-based materials as adsorbents for HMs are conferred in the outlook. This will help many researchers in their upcoming work.

Adsorption of BiOBr microspheres to rhodamine B and its influence on photocatalytic reaction

Adsorption and its influence are often neglected during photocatalytic degradation of organic pollutants. To call attention to these issues, a novel bismuth oxybromide (BiOBr) microsphere with hierarchical flower-like structure was fabricated through a facile hydrothermal process using polyvinyl pyrrolidone (PVP) as additive in this work, and then the adsorption of the BiOBr microspheres to RhB and its influence on the photocatalytic degradation of RhB were investigated in detail. Experimental results show that the BiOBr microspheres have a very strong adsorption capacity to RhB. The adsorption behavior follows the Langmuir model and the quasi second order kinetic equation. Tests of the photocatalytic degradation of RhB under visible irradiation verify that the adsorption of the BiOBr microspheres to RhB greatly boosts the degradation of RhB due to the "enriching effect", and a complete degradation of 20 mg L^-1 RhB only requires 37 min.

Effect of grinding time on bismuth oxyhalides optical and morphological properties influence on photocatalytic removal of organic dye

Herein, we reported the synthesis of BiOX (X = Cl, Br) with different grinding time like 15 min and 30 min to analyze the evolution of physiochemical properties and the morphological evolution. The structural, optical, vibrational properties were examined by standard characterization studies. The formation of bismuth oxyhalides were confirmed by XRD and Raman studies. The crystallite size was decreased as in 30 min grinded sample whereas there is an influence of crystal structure. BiOCl (15 and 30 min) samples expelled the nanoflake like structure with the flakes arranged to form a nanoflower morphology. On comparing BiOCl (15 min), there is high orientation of nanoflakes on BiOCl (30 min) sample. As explored in BiOBr (15 and 30 min) samples, the development of nanoplates were found. The growth of nanoplates was enhanced in the better way in BiOBr (30 min) than BiOBr (15 min). The grinding time has explored a great influence on morphology. The photocatalyst test for prepared photocatalysts was performed to reduce the RhB dye. The photocatalysts showed 74%, 97%, 98% and 99.8% for BiOCl (15 min), BiOCl (30 min), BiOBr (15 min) and BiOBr (30 min). The rate constant value obtained was 0.008, 0.011, 0.021, 0.033 and 0.068 min^-1. BiOBr (30 min) sample achieved higher rate constant value. The hierarchical nanostructures and narrow bandgap has made the samples to be a potential candidate to reduce the toxic pollutants with complete efficiency.

Fluid Field Modulation in Mass Transfer for Efficient Photocatalysis

Mass transfer is an essential factor determining photocatalytic performance, which can be modulated by fluid field via manipulating the kinetic characteristics of photocatalysts and photocatalytic intermediates. Past decades have witnessed the efforts and achievements made in manipulating mass transfer based on photocatalyst structure and composition design, and thus, a critical survey that scrutinizes the recent progress in this topic is urgently necessitated. This review examines the basic principles of how mass transfer behavior impacts photocatalytic activity accompanying with the discussion on theoretical simulation calculation including fluid flow speed and pattern. Meanwhile, newly emerged viable photocatalytic micro/nanomotors with self-thermophoresis, self-diffusiophoresis, and bubble-propulsion mechanisms as well as magnet-actuated photocatalytic artificial cilia for facilitating mass transfer will be covered. Furthermore, their applications in photocatalytic hydrogen evolution, carbon dioxide reduction, organic pollution degradation, bacteria disinfection and so forth are scrutinized. Finally, a brief summary and future outlook are presented, providing a viable guideline to those working in photocatalysis, mass transfer, and other related fields.

New insights into the efficient charge transfer by construction of adjustable dominant facet of BiOI/CdS heterojunction for antibiotics degradation and chromium Cr(VI) reduction under visible-light irradiation

The narrow light-response range and high electron/hole recombination rate greatly restrict the widespread use of photocatalytic technology. The integration of exposing dominant facet of semiconductor and Z-scheme heterostructures designing is expected to break those barriers. Herein，In this work, hydrothermal and ultrasonic stirring methods were used to selectively exposed the (001) and (110) facet of BiOI to construct the BiOI/CdS heterostructures. The obtained BiOI(001)/CdS material shown the maximum degradation for tetracycline-based antibiotics (Oxytetracycline, Tetracycline and Doxycycline), and excellent reduction of hexavalent chromium. Combining the electron spin resonance and scavenger experiments, the superior photocatalytic capacity was attributed to the generation of superoxide and hydroxyl radicals. DFT calculation results shown BiOI(001)/CdS performed high binding energy and adsorption energy for hexavalent chromium, and the different work function between BiOI(001) and CdS confirmed the building of internal electric field, thereby increased the charge separation. Finally, the Gaussian 09 and HPLC-MS program investigated the attack sites of free radicals and degradation pathways in the degradation of antibiotics. This study not only provides a potential photocatalyst, also gives an in-depth understanding of the photocatalytic properties of heterojunctions constructed by different exposed crystal facets.

Fluidized ZnO@BCFPs Particle Electrodes for Efficient Degradation and Detoxification of Metronidazole in 3D Electro-Peroxone Process

A novel material of self-shaped ZnO-embedded biomass carbon foam pellets (ZnO@BCFPs) was successfully synthesized and used as fluidized particle electrodes in three-dimensional (3D) electro-peroxone systems for metronidazole degradation. Compared with 3D and 2D + O₃ systems, the energy consumption was greatly reduced and the removal efficiencies of metronidazole were improved in the 3D + O₃ system. The degradation rate constants increased from 0.0369 min^-1 and 0.0337 min^-1 to 0.0553 min^-1, respectively. The removal efficiencies of metronidazole and total organic carbon reached 100% and 50.5% within 60 min under optimal conditions. It indicated that adding ZnO@BCFPs particle electrodes was beneficial to simultaneous adsorption and degradation of metronidazole due to improving mass transfer of metronidazole and forming numerous tiny electrolytic cells. In addition, the process of metronidazole degradation in 3D electro-peroxone systems involved hydroxyethyl cleavage, hydroxylation, nitro-reduction, N-denitrification and ring-opening. The active species of ·OH and ·O₂^- played an important role. Furthermore, the acute toxicity LD₅₀ and the bioconcentration factor of intermediate products decreased with the increasing reaction time.