N doped -TiO2 coupled to BiVO4 with high performance in photodegradation of Ofloxacin antibiotic and Rhodamine B dye under visible light

Photocatalytic oxidation of formaldehyde under visible light using BiVO4-TiO2 synthesized via ultrasonic blending

Formaldehyde (HCHO) is one of the primary indoor air pollutants, and efficiently eliminating it, especially at low concentrations, remains challenging. In this study, BiVO4-TiO2 catalyst was developed using ultrasonic blending technology for the photocatalytic oxidation of low-level indoor HCHO. The crystal structure, surface morphology, element distribution, and active oxidation species of the catalyst were examined using XRD, SEM, TEM, UV-Vis, EDS, and ESR techniques. Our results demonstrated that the BiVO4-TiO2 catalyst, prepared by ultrasonic blending, exhibited good oxidation performance and stability. The HCHO concentration reduced from 1.050 to 0.030 mg/m3 within 48 h, achieving a removal rate of 97.1%. The synergy between BiVO4 and TiO2 enhanced the efficiency of separating photogenerated carriers and minimized the likelihood of recombination between photogenerated electrons and holes. Additionally, this synergy significantly enhanced the presence of hydroxyl radicals (·OH) on the catalyst, resulting in an oxidation performance superior to that of either BiVO4 or TiO2. Our research offers valuable insights for the development of new photocatalysts to address HCHO pollution.

E-beam irradiation-induced synthesis of hydroxyethyl cellulose/(Cu2O-rGO)/BiVO4-based nanocomposite for photocatalytic remediation of wastewater under visible light

Using E-beam irradiation as an eco-friendly technique for initiation and crosslinking, a series of Hydroxyethyl Cellulose-poly vinyl alcohol copolymer hydrogels were synthesized as templates for cuprous oxide (Cu2O), reduced graphene oxide (rGO) and bismuth vanadate (BiVO4) nanoparticles to be used as nanocomposites photocatalysts for methylene blue (MB) dye decolorization using visible light. Preparation conditions were optimized to ensure the construction of a good network architecture and therefore the highest gelation degree. For the preparation of (Cu2O@rGO)/BiVO4 nanocomposites, a series of rGO was decorated by Cu2O using the precipitation method, followed by mixing with BiVO4 which was synthesized hydrothermally. (EDX), (XRD), (TEM), and (SEM) were used for nanoparticle characterization. The thermal characteristics of the fabricated nanocomposites were evaluated using thermal gravimetric analysis. The presence of rGO enhanced the decolorization efficiency of MB about 20 % higher than that of (HEC-PVA)/Cu2O which achieves only (59 %) decolorization efficiency. After the addition of BiVO4 NPs, the decolorization efficiency increased to reach 90 % after 150 min at pH 11 using a 10 ppm MB solution. The developed (HEC-PVA)/(Cu2O@rGO)/BiVO4 photocatalyst exhibits efficient reusability for 5 cycles. Treated dyed water shows a germination index (GI) of 82 % suggesting its suitability for irrigation of playgrounds and gardens.

Semiconductors Application Forms and Doping Benefits to Wastewater Treatment: A Comparison of TiO2, WO3, and g-C3N4

Photocatalysis has been vastly applied for the removal of contaminants of emerging concern (CECs) and other micropollutants, with the aim of future water reclamation. As a process based upon photon irradiation, materials that may be activated through natural light sources are highly pursued, to facilitate their application and reduce costs. TiO2 is a reference material, and it has been greatly optimized. However, in its typical configuration, it is known to be mainly active under ultraviolet radiation. Thus, multiple alternative visible light driven (VLD) materials have been intensively studied recently. WO3 and g-C3N4 are currently attractive VLD catalysts, with WO3 possessing similarities with TiO2 as a metal oxide, allowing correlations between the knowledge regarding the reference catalyst, and g-C3N4 having an interesting and distinct non-metallic polymeric structure with the benefit of easy production. In this review, recent developments towards CECs degradation in TiO2 based photocatalysis are discussed, as reference catalyst, alongside the selected alternative materials, WO3 and g-C3N4. The aim here is to evaluate the different techniques more commonly explored to enhance catalyst photo-activity, specifically doping with multiple elements and the formation of composite materials. Moreover, the possible combination of photocatalysis and ozonation is also explored, as a promising route to potentialize their individual efficiencies and overcome typical drawbacks.

N-TiO2-δ/g-C3N4 Dual Photocatalysts for Efficient Oxytetracycline Hydrochloride Photodegradation and CO2 Photoreduction

A series of $x\%$ (wt) N-TiO2-δ/g-C3N4 composites was synthesized by calcination and hydrothermal methods (labeled $x$ TiCN, $x$ : 5, 10, and 15). All composites were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, UV-vis diffuse reflectance spectroscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy. The photocatalytic activity of these composites was evaluated through oxytetracycline hydrochloride (denoted as OTC) photodegradation and CO2 photoreduction. The $x$ TiCN composites exhibited higher OTC photodegradation than bulk g-C3N4. 10TiCN was slightly more active than 5TiCN and 15TiCN, with a photodegradation yield of 97% after 5 h of light irradiation and constant rate of 0.647 h-1. For CO2 photoreduction, it was observed that 5TiCN exhibited the highest activity among the synthesized composites, with 7.0 ppm CH4 formed. This CH4 concentration was 7.8 times higher than the concentration formed by bulk g-C3N4 (0.9 ppm). A $Z$ -scheme mechanism was proposed to explain the enhanced photocatalysis by $x\%$ (wt) N-TiO2-δ/g-C3N4 composites. The $Z$ -scheme structure increased redox ability, caused better separation of photogenerated electron-hole pairs, and broadened the light absorption zone of the photocatalysts.

Application of a novel biomimetic double-ligand zirconium-based metal organic framework in environmental restoration and energy conversion

The development of visible-light response photocatalysts with a high catalytic performance and long-term cyclic stability is of great significance in the field of energy and environmental protection. Inspired by photosynthesis, a novel three-dimensional coral zirconium-based metal organic framework (MOF) was synthesized using a double-ligand strategy. The optimal sample, Zr-TCPP-bpydc (2:1), (the ratio of tetra-(4-carboxyphenyl) porphyrin to 2,2'-bipyridine-5,5'-dicarboxylic acid is 2:1) shows an excellent photocatalytic activity under visible light irradiation, and the effects of the amount of photocatalyst, pH and concentration on the degradation rate were investigated under the optimum conditions. It has a high degradation rate of tetracycline (98.12% for tetracycline and 96.74% for ofloxacin), which is 2.11 times higher than that of single ligand Zr-bpydc (zirconium-based MOF containing only 2,2'-bipyridine-5,5'-dicarboxylic acid). More importantly, it also has a good H₂ evolution rate (213.68 μmol g^-1h^-1) and CO₂ reduction (35.81 μmol g^-1h^-1). In addition, the intermediate pathway of degradation, photocatalytic enhancement mechanism and cycle stability were deeply studied by liquid chromatography-mass spectrometry (LC-MS), electron spin resonance spectroscopy (ESR), linear sweep voltammetry (LSV) and recycling tests. The synthesis of a three-dimensional biomimetic coral zirconium-based MOF material will provide guidance for the development of new, promising, and natural ideal photocatalytic materials.