Determination of levodopa in pharmaceutical preparations by irreversible biamperometry

Monitoring levodopa oxidation and reduction reactions using surface plasmon resonance on a nanohole array electrode

The traditional method of monitoring the oxidation and reduction of biomedical materials usually relies on electrochemical (EC) measurement techniques. Here, we demonstrate a surface plasmon resonance (SPR) method to monitor the oxidation process. Using levodopa L-dopa as the target analyte, a nanohole sensing plate is embedded in the EC electrode to enhance the oxidation signal and generate SPR. Cyclic voltammetry (CV) measurement was first conducted to understand the baseline of EC response of L-Dopa. Then, the redox reactions were simultaneously monitored through SPR measurements during the CV voltage scan. The results showed that the limit of detection using traditional CV reached 1.47 μM while using EC-SPR, the limit of detection improved to 1.23 μM. Most importantly, we found a strong correlation between CV current profiles and the SPR reflection spectra. Our results facilitate detecting electrochemical reactions using an optical probing method.

Citrate-capped Mn-modified CdSe/CdS quantum dots as luminescent probes for levodopa detection in aqueous solution

A novel kind of citrate capped Mn-modified CdSe/CdS quantum dots (QDs) was developed. The Mn-modified CdSe/CdS QDs had a narrow, symmetric emission and strong fluorescence with quantum yield over 41%. The interaction between the QDs and levodopa was investigated. The results showed that levodopa selectively quenched the fluorescence intensity of the QDs. Based on the fluorescence quenching of the synthesized QDs by levodopa, a simple, rapid and specific quantitative method for levodopa was proposed. The factors affecting the fluorescence detection for levodopa were studied. Under the optimum conditions, the quenched intensity of the fluorescence versus levodopa concentration from 1 to 100 μM gave a linear response with an excellent correlation coefficient of 0.9996, and the limit of detection (3σ/K) was 2 × 10(-7)M. The contents of levodopa in pharmaceutical tablets were determined by the proposed method and the results agreed with the claimed values.

Cyclic biamperometry at micro-interdigitated electrodes

Cyclic biamperometry was studied as an analytical method for use with commercially available, comb-type, coplanar microinterdigitated electrodes (μIDEs), using the ferri-/ferrocyanide redox couple as a model analyte. The μIDEs studied in this work were made of gold that had been deposited onto a Ti/W adhesion layer on borosilicate glass chips and had 5 and 10 μm bands with equal gap sizes. Close proximity of the two working electrodes, and their interdigitation, resulted in signal amplification by redox cycling. Results were compared with those obtained by cyclic voltammetry, where one of the two IDE electrodes was used as the working electrode and external reference and auxiliary electrodes were used. Amplification factors of almost 20 were achieved due to redox cycling. Attempts to apply cyclic voltammetry to the μIDEs, with one of the combs as the working and the other as the auxiliary electrode, were unsuccessful due to corrosion of the auxiliary electrode comb. Results of this study, and the electrochemically unique feature of biamperometry to probe but not change the net contents of the medium under examination, suggest the applicability of scanning biamperometry at μIDEs to the very small volumes and electrochemical cell dimensions that are now of great interest.