Effects of concave and convex substrate curvature on cell mechanics and the cytoskeleton

Design of a Haversian system-like gradient porous scaffold based on triply periodic minimal surfaces for promoting bone regeneration

INTRODUCTION

The bone ingrowth depth in the porous scaffolds is greatly affected by the structural design, notably the pore size, pore geometry, and the pore distribution. To enhance the bone regeneration capability of scaffolds, the bionic design can be regarded as a potential solution.

OBJECTIVES

We proposed a Haversian system-like gradient structure based on the triply periodic minimal surface architectures with pore size varying from the edge to the center. And its effects in promoting bone regeneration were evaluated in the study.

METHODS

The gradient scaffold was designed using the triply periodic minimal surface architectures. The mechanical properties were analyzed by the finite element simulation and confirmed using the universal machine. The fluid characteristics were calculated by the computational fluid dynamics analysis. The bone regeneration process was simulated using a in silico computational model containing the main biological, physical, and chemical variation during the bone growth process. Finally, the in vitro and in vivo studies were carried out to verify the actual osteogenic effect.

RESULTS

Compared to the uniform scaffold, the biomimetic gradient scaffold demonstrated better performance in stress conduction and reduced stress shielding effects. The fluid features were appropriate for cell migration and flow diffusion, and the permeability was in the same order of magnitude with the natural bone. The bone ingrowth simulation exhibited improved angiogenesis and bone regeneration. Higher expression of the osteogenesis-related genes, higher alkaline phosphatase activity, and increased mineralization could be observed on the gradient scaffold in the in vitro study. The 12-week in vivo study proved that the gradient scaffold had deeper bone inserting depth and a more stable bone-scaffold interface.

CONCLUSION

The Haversian system-like gradient structure can effectively promote the bone regeneration. This structural design can be used as a new solution for the clinical application of prosthesis design.

Strategies for extended lifetime of implantable intraperitoneal insulin catheters

Implantable insulin infusion systems using the intra-peritoneal route have dramatically changed the management of diabetes paving the way toward the realization of the potential "holy grail" of a fully implantable artificial pancreas. However, the wear duration of delivery catheters is compromised by the foreign body-mediated immune response. Both occlusion material present at the distal catheter tip end and fibrotic encapsulation surrounding the catheters influence the controlled and precise delivery of insulin, which eventually leads to the need for surgical intervention. The novel part of the current work is the investigation of the roles of implant physical properties (catheter size and tip configuration), as well as local inflammation control (through utilization of an anti-inflammatory agent) on the host fibrotic response using a previously developed animal model. The cellular and molecular response, the medication delivery efficacy as well as the ability to flush the catheters were examined and further compared among the different mitigation strategies. Reduction in catheter size as well as tuning the tip configuration from a cone shape to a round shape showed delayed host recognition and delayed propagation of the fibrotic response. However, the round shaped tips had an increased occurrence of lumen occlusion as a result of flow change. It became apparent that changing the physical properties of the catheters was not a long-term solution to catheter obstructions caused by the foreign body reaction. In comparison, control of the local inflammatory response through the use of an anti-inflammatory agent demonstrated a promising strategy for maintenance of catheter functionality without any type of obstructions. These finding will have a large impact toward the development of long-term use catheters for continuous intraperitoneal insulin infusion.

The Influence of the Surface Topographical Cues of Biomaterials on Nerve Cells in Peripheral Nerve Regeneration: A Review

The surface topographies of artificial implants including surface roughness, surface groove size and orientation, and surface pore size and distribution have a great influence on the adhesion, migration, proliferation, and differentiation of nerve cells in the nerve regeneration process. Optimizing the surface topographies of biomaterials can be a key strategy for achieving excellent cell performance in various applications such as nerve tissue engineering. In this review, we offer a comprehensive summary of the surface topographies of nerve implants and their effects on nerve cell behavior. This review also emphasizes the latest work progress of the layered structure of the natural extracellular matrix that can be imitated by the material surface topology. Finally, the future development of surface topographies on nerve regeneration was prospectively remarked.

GAKTpore: Stereological Characterisation Methods for Porous Foams in Biomedical Applications

In tissue engineering, scaffolds are a key component that possess a highly elaborate pore structure. Careful characterisation of such porous structures enables the prediction of a variety of large-scale biological responses. In this work, a rapid, efficient, and accurate methodology for 2D bulk porous structure analysis is proposed. The algorithm, "GAKTpore", creates a morphology map allowing quantification and visualisation of spatial feature variation. The software achieves 99.6% and 99.1% mean accuracy for pore diameter and shape factor identification, respectively. There are two main algorithm novelties within this work: (1) feature-dependant homogeneity map; (2) a new waviness function providing insights into the convexity/concavity of pores, important for understanding the influence on cell adhesion and proliferation. The algorithm is applied to foam structures, providing a full characterisation of a 10 mm diameter SEM micrograph (14,784 × 14,915 px) with 190,249 pores in ~9 min and has elucidated new insights into collagen scaffold formation by relating microstructural formation to the bulk formation environment. This novel porosity characterisation algorithm demonstrates its versatility, where accuracy, repeatability, and time are paramount. Thus, GAKTpore offers enormous potential to optimise and enhance scaffolds within tissue engineering.

How microbes read the map: Effects of implant topography on bacterial adhesion and biofilm formation

Microbes have remarkable capabilities to attach to the surface of implanted medical devices and form biofilms that adversely impact device function and increase the risk of multidrug-resistant infections. The physicochemical properties of biomaterials have long been known to play an important role in biofilm formation. More recently, a series of discoveries in the natural world have stimulated great interest in the use of 3D surface topography to engineer antifouling materials that resist bacterial colonization. There is also increasing evidence that some medical device surface topographies, such as those designed for tissue integration, may unintentionally promote microbial attachment. Despite a number of reviews on surface topography and biofilm control, there is a missing link between how bacteria sense and respond to 3D surface topographies and the rational design of antifouling materials. Motivated by this gap, we present a review of how bacteria interact with surface topographies, and what can be learned from current laboratory studies of microbial adhesion and biofilm formation on specific topographic features and medical devices. We also address specific biocompatibility considerations and discuss how to improve the assessment of the anti-biofilm performance of topographic surfaces. We conclude that 3D surface topography, whether intended or unintended, is an important consideration in the rational design of safe medical devices. Future research on next-generation smart antifouling materials could benefit from a greater focus on translation to real-world applications.

Nanosized concave pit/convex dot microarray for immunomodulatory osteogenesis and angiogenesis

The immunomodulatory capability of biomaterials is of paramount importance for successful material-mediated bone regeneration. Particularly, the design of surface nano-topography can be leveraged to instruct immune reactions, yet the understanding of such "nano-morphology effect" is still very limited. Herein, highly ordered nano-concave pit (denoted as NCPit) and nano-convex dot (denoted as NCDot) microarrays with two different sizes were successfully constructed on a 316LSS surface via anodization and subsequently immersion-coating treatment, respectively. We, for the first time, comparatively investigated the interactions of NCPit and NCDot microarrays with RAW264.7 macrophages and their immunomodulatory impacts on osteogenesis and angiogenesis of human bone mesenchymal stem cells (hBMSCs) and human umbilical vein endothelial cells (HUVECs). NCDot microarrays induced macrophages towards M2 polarization with the higher expression level of anti-inflammatory markers (IL-10 and CD 206) and the lower level of pro-inflammatory markers (TNF-α, IL-1β, IL-6 and CD 86) than those of the corresponding NCPit microarrays. During the process, the expressions of osteogenesis-related genes (Runx2, OPN and OCN) of hBMSCs, and angiogenesis-related genes (eNOS, HIF-1α, KDR and VEGF) of HUVECs were significantly upregulated by the NCDot microarray-modulating immune microenvironment of macrophages, and finally stimulated osteogenesis and angiogenesis. Thus, the prepared NCDot arrays were able to significantly promote osteo-/angiogenic activity by generating a more suitable immune microenvironment than NCPit arrays, offering substantial evidence for designing immunomodulatory biomaterials with specific microstructures and optimal bioactivity.

Single Polar Cell Trapping Based on the Breath Figure Method

The ability to research individual cells is important for various biological studies. Currently reported biointerfaces for single-cell analysis can only trap individual cells in random morphologies. Cell polarity is a key factor in cellular functions, and the study of single-cell polarity can facilitate an understanding of cancer metastasis and stem-cell differentiation. For single polar cell trapping, anisotropic honeycomb-structured films were prepared. Elastic poly(1,2-butadiene) honeycomb films with ordered hexagonal pores were first prepared via the breath figure method. Subsequently, the films were subjected to mechanical stretching and fixed via photo-cross-linking under UV light irradiation. This stretched honeycomb structure was then transferred to a polystyrene surface. The resultant anisotropic porous films exhibited excellent capacity for single-cell trapping. Besides contributing to the physical spatial confinement of cells, the trapped single cells exhibited orientation in different polarities. The single polar cell array provided a novel platform for fundamental biological research.

Designing 3D Biological Surfaces via the Breath-Figure Method

The fabrication of biointerfaces that mimic cellular physiological environments is critical to understanding cell behaviors in vitro and for the design of tissue engineering. Breath figure is a self-assemble method that uses water droplets condensed from moisture as template and ends up with a highly ordered hexagonal pore array; this approach is used to fabricate various biological substrates. This progress report provides an overview of strategies to achieve topographical modifications and chemical-patterned arrays, such as modulation of the pore size, shape and selective decoration of the honeycomb holes. Using recent results in the biological fields, potential future applications and developments of honeycomb structures are commented upon.