Nature of surface oxygen intermediates on TiO2 during photocatalytic splitting of water

Cobalt vacancy-originated TiMnCoCN compounds with a self-adjusting ability for the high-efficiency acidic oxygen evolution reaction

Oxygen evolution reaction (OER) electrocatalysts in acidic media, except for precious IrO2, have difficulty realizing good electrocatalytic activity and high electrochemical stability simultaneously. However, the scarcity of IrO2 as an acidic OER electrocatalyst impedes its large-scale application in hydrogen generation, organic synthesis, nonferrous metal production and sewage disposal. Herein, we report the design and fabrication of a nanoporous TiMnCoCN compound based on the nanoscale Kirkendall effect, possessing an intriguing self-adjusting capability for the oxygen evolution reaction (OER) in a 0.5 M H2SO4 solution. The nanoporous TiMnCoCN compound electrode for the acidic OER displays a low overpotential of 143 mV for 10 mA cm-2 and exhibits no increase in potential over 50,000 s, which is ascribed to the self-adjusting ability, Carbon/nitrogen (C/N) incorporation and nanoporous architecture. The concentration of inert TiO2 on the reconstructed surface of the compound can self-adjust with the change in OER potential via a cobalt-dissolved vacancy approach according to the stabilization requirement. In this work, the self-reconstruction law of surface structure was discovered, providing a novel strategy for designing and fabricating nonnoble OER electrocatalysts with superior catalytic performance and robust stability in acidic media.

Recent Developments in Heterogeneous Photocatalysts with Near-Infrared Response

Photocatalytic technology has been considered as an efficient protocol to drive chemical reactions in a sustainable and green way. With the assistance of semiconductor-based materials, heterogeneous photocatalysis converts solar energy directly into chemical energy that can be readily stored. It has been employed in several fields including CO2 reduction, H2O splitting, and organic synthesis. Given that near-infrared (NIR) light occupies 47% of sunlight, photocatalytic systems with a NIR response are gaining more and more attention. To enhance the solar-to-chemical conversion efficiency, precise regulation of the symmetric/asymmetric nanostructures and band structures of NIR-response photocatalysts is indispensable. Under the irradiation of NIR light, the symmetric nano-morphologies (e.g., rod-like core-shell shape), asymmetric electronic structures (e.g., defect levels in band gap) and asymmetric heterojunctions (e.g., PN junctions, semiconductor-metal or semiconductor-dye composites) of designed photocatalytic systems play key roles in promoting the light absorption, the separation of electron/hole pairs, the transport of charge carriers to the surface, or the rate of surface photocatalytic reactions. This review will comprehensively analyze the four main synthesis protocols for the fabrication of NIR-response photocatalysts with improved reaction performance. The design methods involve bandgap engineering for the direct utilization of NIR photoenergy, the up-conversion of NIR light into ultraviolet/visible light, and the photothermal effect by converting NIR photons into local heat. Additionally, challenges and perspectives for the further development of heterogeneous photocatalysts with NIR response are also discussed based on their potential applications.

A highly sensitive photoelectrochemical aptasensor based on BiVO4 nanoparticles-TiO2 nanotubes for detection of PCB72

In this work, a simple and highly sensitive photoelectrochemical (PEC) aptasensor has been developed for detecting PCB72 based on TiO₂ nanotubes (NTs) decorated with BiVO₄ nanoparticles (NPs). The BiVO₄ NPs-TiO₂ NTs composites prepared through a simple hydrothermal method exhibit good visible-light adsorption ability, high PEC response and perfect photo-excited stability. The synthesized composites were explored as the photoactive sensing materials for development of a PEC sensing platform for the first time. Here, Au nanoparticles (NPs) were first deposited the composites, and the anti-PCB72 aptamer molecules were immobilized on the Au NPs-deposited BiVO₄ NPs-TiO₂ NTs. The developed PEC aptasensor exhibits high sensitivity and specificity for PCB72 with a wide linear range from 1 ng/L to 500 ng/L and a low detection limit of 0.23 ng/L. The application of the aptasensor was evaluated by determining PCB 72 in the environment water samples. Thus, a simple and efficient PEC sensing platform was established for detecting the content of PCBs in the environment.

Nanorod bundle-like silver cyanamide nanocrystals for the high-efficiency photocatalytic degradation of tetracycline

Silver cyanamide (Ag₂NCN) is a type of functional semiconductor material with a visible-light response. Ag₂NCN nanocrystals with nanorod bundle-like (RB) or straw bundle-like (SB) assemblies were successfully prepared, and it was found that the as-prepared Ag₂NCN nanorod bundle (RB) samples had a narrower bandgap of 2.16 eV, which was lower than those reported. As a result, RB samples demonstrated a higher photocatalytic activity towards tetracycline (TC) degradation. The analyses of active species confirmed that both the photo-generated holes and ˙O₂ ^- radicals of the RB sample played significant roles during the process of photocatalytic degradation of TC, and the holes were the main active species. These results indicated that effective charge separation could be achieved by adjusting the morphologies of Ag₂NCN nanocrystals. This study provides a new approach to prepare Ag₂NCN nanocrystals with a narrower bandgap and strong visible-light response towards antibiotic degradation.

Formation of hydroperoxo (-OOH) species on the surface of self-doped Bi2.15WO6: reactivity towards As(iii) oxidation

Bi2+xWO6 is a cost-effective and environmentally friendly photocatalyst that shows high reactivity in the oxidation of various contaminants under visible light. However, under alkaline conditions, the reactive oxidative species in the Bi2+xWO6 system are still not clear yet. In this study, it is observed that the oxidation rates of As(iii) increase with increasing pH values in the Bi2.15WO6 system. Photoluminescence and the Mott-Schottky analyses confirm that OH- promotes the separation and transfer of photogenerated electron-hole pairs over Bi2.15WO6, thus facilitating the oxidation of As(iii). Electron spin resonance spectra analysis and quenching experiments rule out contributions of •OH, O2˙-, 1O2 and superoxo species to As(iii) oxidation and indicate that surface -OOH and/or H2O2 are indeed the predominant species under alkaline conditions. The improved production of H2O2 by H-donors such as glucose and phenol, as well as the UV-vis diffuse reflectance and Raman analyses, further confirms the formation of surface -OOH on Bi2.15WO6 under alkaline conditions. In the dark, the significant higher oxidation rate of As(iii) by H2O2-Bi2.15WO6 than that by H2O2 alone reveals that surface -OOH, instead of H2O2, plays an important role in As(iii) oxidation. This study enriches our understanding of the diversity of reactive oxygen species (ROS) in the Bi2.15WO6 system and gives new insight into the mechanism involved in the oxidation of As(iii) under alkaline conditions.

Direct evidence of the key role of UV-formed peroxide species in photocatalytic gas-solid oxidation in air on anatase TiO2 particles

IR spectroscopy was applied for the in situ investigations of surface intermediates formed on the surface of TiO2 (anatase) and ZnO under UV light illumination in air and their reactivity in the elimination of simple pollutant molecules. UV-irradiation of TiO2 (anatase) in air leads to the generation of peroxo-species with the peaks at 852 and 912 cm-1, but the bands of O2˙-ads were not detected. This is, to our knowledge, the first direct in situ IR spectroscopic detection of O2 photosorption intermediates in moist air. The formation of peroxo-species in these conditions is specific for TiO2 (anatase), whereas on ZnO the predominant species under UV light illumination in air are O2˙-ads and H2O2, desorbing into gas phase. Adsorbed water and surface hydroxyl groups contribute to the formation and stabilization of peroxo-species on TiO2 anatase during UV illumination in an oxygen atmosphere. If UV-irradiation is carried out in the environment of moist argon instead of moist air, the peroxo-species on TiO2 anatase are formed from water in a negligible quantity. Peroxo-species formed after O2 photoadsorption on TiO2 anatase in moist air have band positions similar to peroxo-species formed after photodecomposition of H2O2 (with accompanying color change of this sample from yellow to white). Direct experimental IR-spectroscopic evidence of peroxo-species reactivity as oxidative intermediates on TiO2 (anatase) in CO and ethanol vapor photooxidative processes is firstly obtained. These results confirm our early conclusion that peroxo-species formed under UV-irradiation in O2 on the hydrated surface of TiO2 (anatase) can be responsible for the surprising extreme dependence of the CO photooxidation rate on the adsorbed water coverage with the maximum at ∼0.5 ML. The ZnO sample was not active in the photooxidation of these molecules in air. It is concluded that UV formed peroxo-species are important diamagnetic oxidative intermediates in heterogeneous photochemical gas-solid oxidation processes on TiO2 (anatase).

In Situ Derived NixFe1-xOOH/NiFe/NixFe1-xOOH Nanotube Arrays from NiFe Alloys as Efficient Electrocatalysts for Oxygen Evolution

Herein, Ni_xFe_1-xOOH/NiFe/Ni_xFe_1-xOOH sandwich-structured nanotube arrays (SNTAs) supported on carbon fiber cloth (CFC) (Ni_xFe_1-xOOH/NiFe/Ni_xFe_1-xOOH SNTAs-CFC) have been developed as flexible high-performance oxygen evolution reaction (OER) catalysts by a facile in situ electrochemical oxidation of NiFe metallic alloy nanotube arrays during oxygen evolution process. Benefiting from the advantages of high conductivity, hollow nanotube array, and porous structure, Ni_xFe_1-xOOH/NiFe/Ni_xFe_1-xOOH SNTAs-CFC exhibited a low overpotential of ∼220 mV at the current density of 10 mA cm^-2 and a small Tafel slope of 57 mV dec^-1 in alkaline solution, both of which are smaller than those of most OER electrocatalysts. Furthermore, Ni_xFe_1-xOOH/NiFe/Ni_xFe_1-xOOH SNTAs-CFC exhibits excellent stability at 100 mA cm^-2 for more than 30 h. It is believed that the present work can provide a valuable route for the design and synthesis of inexpensive and efficient OER electrocatalysts.