Red-emitting salicylaldehyde Schiff base with AIE behaviour and large Stokes shift

Constructing ESIPT-Capable α-Cyanostilbene Luminogens: Influence of Different Aromatic Substitutions Tethered to H-Acceptor (CH = N) on Photophysical Properties, Cu2+ and Fe3+ Detection

Herein, two excited-state intramolecular proton transfer (ESIPT)-capable α-cyanostilbene luminogens were synthesized by Schiff base reaction of salicylaldehyde-like α-cyanostilbene candidate with 1-naphthylamine and 3-biphenylamine, respectively. We systematically analyzed their photophysical properties compared with their analogue, and demonstrated that their fluorescence behaviors could be elaborately modulated by different aromatic substitutions tethered to H-acceptor (CH = N). In virtue of the outstanding solid fluorescence, the 3-biphenylamine-decorated fluorophore was applied for monitoring Cu2+/Fe3+ qualitatively on the TLC-based test strip in real time and sensing Cu2+/Fe3+ quantitatively in the THF/H2O medium (fw = 90%, pH = 7.4). When the probe chelated with Cu2+/Fe3+, similar "turn-off" fluorescence signal outputs were triggered. From the fluorescence titration experiments, the detection limits were evaluated as 7.97 × 10- 8 M for Cu2+ and 8.24 × 10- 8 M for Fe3+, and the binding constant (Kα) values of the complexes were found to be 7.80 × 104 M-1 for Cu2+ and 9.06 × 104 M-1 for Fe3+. Job's plots indicated that probe complexed with Cu2+/Fe3+ in a 2:1 binding stoichiometry ratio. Furthermore, the probe was used to accurately quantify the Fe3+ spiked in real water specimens. This study offered a new perspective to construct ESIPT-capable α-cyanostilbene luminogen as the potential luminescent probe.

Design and application of Cd2+ polypeptide fluorescent probes based on Aggregation Induced Emission (AIE)

Cadmium is a toxic heavy metal, which is both an environmental pollutant, and a threat to human health. A fluorescent probe was developed to detect Cd2+ selectively, sensitively, and quickly. This study reports the successful development of a polypeptide fluorescent probe TPE-HC (TPE-His-Pro-Gly-Cys) which selectively detects Cd2+ by Aggregation-Induced Emission effect. After fluorescence excitation, Cd2+ can be effectively detected based on the change of fluorescence intensity. The detection limit of Cd2+ in buffer solution was determined to be 151 nM (R2 = 0.9933). This probe exhibits high sensitivity, high cell permeabilit y, and low biological toxicity, and can perform live cell imaging under biological conditions. This study indicates that TPE-HC can detect Cd2+ in biological environments.

Chitosan-salicylide Schiff base with aggregation-induced emission property and its multiple applications

Aggregation-induced emission (AIE) active compounds are fascinated due to their unique properties of limiting intramolecular rotation, and they have been developed in the biomedical fields. In this work, AIE material based on the Schiff base compound of chitosan (Cs) and salicylaldehyde (SA) was designed and synthesized. Cs-SA emits weak light in dilute aqueous solution, and emits bright light in concentrated solution and solid, showing obvious AIE performance. In addition, Cs-SA can also be used as a biosensor to detect Fe³⁺, and Cu²⁺, it has good bioimaging behavior. In addition, it can also be used as biosensor to quantitatively detect gram-positive bacteria and gram-negative bacteria, Moreover, Cs-SA shows excellent broad spectrum antibacterial performance in inhibiting E. coli and S. aureus.

A Novel Fluoro-Pyrazine-Bridged Donor-Accepter-Donor Fluorescent Probe for Lipid Droplet-Specific Imaging in Diverse Cells and Superoxide Anion Generation

PURPOSE

Lipid droplets (LDs) are dynamic organelles which associated with many metabolic processes. Reliable long-term imaging of LD is of great importance in LD-based therapy and research. Conventional fluorescent probes suffer from poor photostability and difficulty of preparation, which compromise their LD imaging ability. In this study, we aim to provide a novel and universal fluorescent probe for LD-specific imaging in both eukaryotic and prokaryotic cells. The versatile and potential applications of the probe were also evaluated.

METHODS

We used one-step Suzuki coupling reaction to synthesize a fluoro-pyrazine-bridged donor-acceptor-donor fluorescent probe (T-FP-T). The fluorescent properties and stability of T-FP-T were detected. Then, LD-specific imaging and dynamic movement tracking capabilities of T-FP-T were studied in fungus, bacteria, plant and animal tissues. The biosafety and photodynamic toxicity of the probe under different light irradiation were characterized.

RESULTS

T-FP-T showed large Stokes shift, superior brightness, excellent photostability, low toxicity. T-FP-T exhibited significant overlaps with adipophilin antibody or the commercial LD probe (LipidSpot™) in the cytoplasm, but not with Mitotracker red, Lysotracker red and Peroxisome Labeling dye. Moreover, T-FP-T also showed efficient superoxide anion generation capability under white LED light irradiation. The viability of Hela cells co-treated with T-FP-T and 1-h white LED light irradiation decreased to 62%.

CONCLUSIONS

All these outstanding capabilities make T-FP-T a new efficient LD-specific imaging probe. The generated superoxide anion from T-FP-T under white LED light irradiation could cause obvious cell death, which will inspire broad study in LD-targeted photodynamic therapy.

White light employing luminescent engineered large (mega) Stokes shift molecules: a review

Large (mega) Stokes shift molecules have shown great potential in white light emission for optoelectronic applications, such as flat panel display technology, light-emitting diodes, photosensitizers, molecular probes, cellular and bioimaging, and other applications. This review aims to summarize recent developments of white light generation that incorporate a large Stokes shift component, key approaches to designing large Stokes shift molecules, perspectives on future opportunities, and remaining challenges confronting this emerging research field. After a brief introduction of feasible pathways in generating white light, exemplifications of large Stokes shift molecules as white light candidates from organic and inorganic-based materials are illustrated. Various possible ways to design such molecules have been revealed by integrating the photophysical mechanisms that are essential to produce red-shifted emission upon photoexcitation, such as excited state intramolecular proton transfer (ESIPT), intramolecular charge transfer (ICT), excited state geometrical relaxation or structural deformation, aggregation-induced emission (AIE) alongside the different formations of aggregates, interplay between monomer and excimer emission, host-guest interaction, and lastly metal to ligand charge transfer (MLCT) via harvesting triplet state. Furthermore, previously reported fluorescent materials are described and categorized based on luminescence behaviors on account of the Stokes shifts value. This review will serve as a rationalized introduction and reference for researchers who are interested in exploring large or mega Stokes shift molecules, and will motivate new strategies along with instigation of persistent efforts in this prominent subject area with great avenues.

Benchmark and parameter tuning of hybrid functionals for fast calculation of excitation energies of AIEgens

We did a comprehensive investigation of 16 popular hybrid functionals in the transition energy simulation of time-dependent density functional theory (TD-DFT) calculations over a broad benchmark based on experimental results of aggregation-induced emission (AIE) luminogens built using a consistent methodology. The statistical difference in the performance of different hybrid functionals indicated that most popular hybrid functionals like B3LYP might not be suitable for AIEgens. Nevertheless, functionals with large HF fractions showed lower deviation. By further adjusting the HF fraction, two functionals, particularly for TD-DFT calculations of AIEgens, were reported for their high accuracy and low calculation cost.

Coordination-driven self-assembly of discrete supramolecular double-metallacycles

This review comprehensively summarizes the recent advances in the coordination-driven self-assembly of discrete supramolecular double-metallacycles.

Chemical sensors for selective and quantitative heparin sensing

In this review article, chemical sensors for selective and quantitative heparin sensing are discussed with detailed examples.

AIE active salicylaldehyde-based hydrazone: A novel single-molecule multianalyte (Al3+ or Cu2+) sensor in different solvents

A simple asymmetric hydrazone 1 based on salicylaldehyde was designed and prepared, and exhibited an evident aggregation-induced emission (AIE) at a long wavelength of 570 nm in aqueous medium. Probe 1 can selectively sense Al³⁺ in CH₃OH solution through the chelation-enhanced fluorescence mechanism and also recognize Cu²⁺ via fluorescence quenching in H₂O solution through the Cu²⁺-induced assembly of aggregates. In addition, the probe can be applied for detecting Cu²⁺ in biological samples.

Depletion of protein thiols and the accumulation of oxidized thioredoxin in Parkinsonism disclosed by a red-emitting and environment-sensitive probe

Protein sulfhydryl groups play a vital role in maintaining cellular redox homeostasis and protein functions and have attracted increasing interests for the selective detection of protein thiols over low-molecular-weight thiols (LMWTs).

Exploring the hidden potential of a methoxy substituted HBT derivative as an efficient example of coupling of AIE and ESIPT processes and as an energy harvesting platform

A methoxy substituted HBT derivative 2-(benzo[d]thiazol-2-yl)-6-methoxyphenol (TMP) showed coupling of AIE and ESIPT, underwent FRET with Rhodamine B and detected Sulfide in pure water by ratiometry.

Rh(iii)-Catalyzed regioselective C–H [4 + 2] C-annulation of vinyl enaminones with alkynes to form polysubstituted salicylaldehydes

Sterically congested polysubstituted salicylaldehydes are accessed through a Rh(iii)-catalyzed regioselective vinylic C–H [4 + 2] C-annulation reaction of vinyl enaminones with alkynes.