Controlling the morphology, size and phase of Nb2O5 crystals for high electrochemical performance

Polymorphs of Nb2O5 Compound and Their Electrical Energy Storage Applications

Niobium pentoxide (Nb2O5), as an important dielectric and semiconductor material, has numerous crystal polymorphs, higher chemical stability than water and oxygen, and a higher melt point than most metal oxides. Nb2O5 materials have been extensively studied in electrochemistry, lithium batteries, catalysts, ionic liquid gating, and microelectronics. Nb2O5 polymorphs provide a model system for studying structure-property relationships. For example, the T-Nb2O5 polymorph has two-dimensional layers with very low steric hindrance, allowing for rapid Li-ion migration. With the ever-increasing energy crisis, the excellent electrical properties of Nb2O5 polymorphs have made them a research hotspot for potential applications in lithium-ion batteries (LIBs) and supercapacitors (SCs). The basic properties, crystal structures, synthesis methods, and applications of Nb2O5 polymorphs are reviewed in this article. Future research directions related to this material are also briefly discussed.

Influence of ZIF-9 and ZIF-12 structure on the formation of a series of new Co/N-doped porous carbon composites as anode electrodes for high-performance lithium-ion batteries

A series of new Co/N-doped porous carbon composites, denoted as Co/CZIF-9 and Co/CZIF-12, containing Co nanoparticles encapsulated in nitrogen-doped carbon matrices were prepared by annealing Co-based zeolite imidazolate framework materials, ZIF-9 and ZIF-12, as the efficient precursors at different temperatures. The structural features of the as-synthesized composites at 900 °C were determined by analytical methods with high reliability. Consequently, Co/CZIF-12_900 exhibits a high first specific discharge capacity of 971.0 mA h g^-1 at a current density of 0.1 A g^-1. Notably, the specific discharge/charge capacity of Co/CZIF-12_900 reaches about 508.8 mA h g^-1 at 0.1 A g^-1 after 100 cycles. The outstanding behaviors can be accounted for by the efficient incorporation of hetero-nitrogen doping and the Co nanoparticles within the layered structure of porous carbon, enhancing electrical conductivity and structural stability and limiting volume change during the intercalation/deintercalation of Li⁺ ions. These findings suggest that the Co/CZIF-12_900 material could be employed as a promising anode electrode for energy storage products.

Engineering Microstructure of a Robust Polymer Anode by Moderate Pyrolysis for High-Performance Sodium Storage

Polymer anodes have inspired considerable research interest for Na-ion batteries (NIBs) owing to their high structural flexibility and resource sustainability but are limited by the sluggish electrode kinetics, insufficient cyclability, and inferior electronic conductivity which usually made a large fraction (20-50 wt %) of conductive carbon additive necessitated. Herein, using a polymeric carbon nitride (PCN) anode as an example, we demonstrated that a moderate pyrolysis of the polymer anode could not only reduce its optical bandgap to enhance its electronic conductivity but also tune its microstructures to facilitate Na+ transfer/storage and sustain the repeated sodiation/desodiation. When used as NIBs anode with 10 wt % conductive carbon adding for preparing the electrode film, the moderate-pyrolysis PCN can promise high specific capacity (351 mAh g-1 at 0.1C), superb rate capability (151 and 95 mAh g-1 at 10C and 20C, respectively), and ultrastable cyclability (88.5% capacity retention after 6500 cycles at 2C). This comprehensive battery performance is much better than that of the previously reported organic counterparts. Our finding opened a new avenue in designing high-performance polymer anode for Na-ion batteries.

Nanoengineering of 2D MXene-Based Materials for Energy Storage Applications

2D MXene-based nanomaterials have attracted tremendous attention because of their unique physical/chemical properties and wide range of applications in energy storage, catalysis, electronics, optoelectronics, and photonics. However, MXenes and their derivatives have many inherent limitations in terms of energy storage applications. In order to further improve their performance for practical application, the nanoengineering of these 2D materials is extensively investigated. In this Review, the latest research and progress on 2D MXene-based nanostructures is introduced and discussed, focusing on their preparation methods, properties, and applications for energy storage such as lithium-ion batteries, sodium-ion batteries, lithium-sulfur batteries, and supercapacitors. Finally, the critical challenges and perspectives required to be addressed for the future development of these 2D MXene-based materials for energy storage applications are presented.

Facile synthesis of Nafion-supported Pt nanoparticles with ultra-low loading as a high-performance electrocatalyst for hydrogen evolution reaction

x%Pt-Naf-CV (Pt-Nafion-Cyclic Voltammetry) catalysts with homogeneously distributed platinum nanoparticles and ultra-low Pt loading are successfully synthesized by using a facile potential cycling approach. The as-synthesized 0.8%Pt-Naf-CV catalyst exhibits an enhanced electrocatalytic activity for hydrogen evolution reaction (HER) in 0.5 M H₂SO₄ solution, which obtains a low overpotential of 34 mV at 10 mA cm^-2. The linear sweep voltammetry (LSV) curve of 0.8%Pt-Naf-CV catalyst is almost consistent with that of commercial Pt/C. However, the 0.8%Pt-Naf-CV catalyst displays a more excellent stability and durability in comparison with commercial Pt/C. Besides, the Pt loading of Pt/C (Pt-10 wt%) is about 10 times that of 0.8%Pt-Naf-CV catalyst. The improved electrocatalytic performances are derived from the synergistic effects of Pt and Nafion. The Nafion plays a significant role as a dispersant, carrier and structure directing agent on the morphology and size of the Pt catalyst. This result contributes a promising method to enhance the catalytic activity and reduce the amount of Pt.

Morphology-preserved transformation of CdS hollow structures toward photocatalytic H2 evolution

Hollow-structured nanomaterials with complex interiors have drawn a great deal of attention due to their unique properties in various fields.

Possibility of Recycling SiOx Particles Collected at Silicon Ingot Production Process as an Anode Material for Lithium Ion Batteries

Recently, some studies have utilized silicon (Si) as an anode material of lithium ion battery by recycling Si from the slurry of wafer slicing dust. The filtration of Si particles condensed from Si vapors that were exhausted from the ingot growing furnace could propose another method of Si recycling. In this study, we investigated the possibility of using such collected silicon oxides (SiO_x) particles as an anode material. After collecting SiO_x particles, FE-SEM, TEM, EDS, XRD, XPS analysis, and charge/discharge test were carried out to investigate characteristics and usability of these particles. FE-SEM and FE-TEM images showed that these particles mainly consisted of spherical primary particles with a diameter of 10 nm or less. Agglomerates of these primary particles were larger than 300 nm in diameter. In TEM image and EDS analysis, crystalline particles were observed along with amorphous particles. As a result of XRD analysis, amorphous silica (SiO₂) and crystalline Si were observed. Charge/discharge tests were carried out to determine the feasibility of using these particles as an anode material for lithium ion batteries. A cycle efficiency of 40.6% was obtained in the test in which the total number of charge/discharge cycle was 100 under the condition of C-rate 0.2 for the first three times and C-rate 1.0 for the remaining 97 times. Results showed that these collected particles could be used as an anode material for lithium ion batteries.

Physical Forces Inducing Thin Amorphous Carbon Nanotubes Derived from Polymer Nanotube/SiO2 Hybrids with Superior Rate Capability for Lithium-Ion Batteries

Different from the traditional template method, a thin amorphous carbon nanotube was prepared by constructing a polymer/SiO₂ composite, utilizing the shrinking action of sulfonated polymer nanotubes (SPNTs) and the physical squeezing action of SiO₂ on it during the pyrolysis of SPNT/SiO₂. Remarkably, the heat treatment atmosphere (N₂, N₂-H₂, or O₂) has an important effect on the surface properties, pore structure, crystallinity, and especially the defect sites, leading to different lithium storage performances. Particularly, the sample calcined in N₂-H₂ (NHCNTs) exhibits outstanding reversible capacity (400.6 mA h g^-1 at 2 A g^-1 after 200 cycles) and rate capability (268.4 mA h g^-1 at 5 A g^-1 and 212.1 mA h g^-1 at 10 A g^-1 after 400 cycles), which are attributed to the thin-walled tubular structure and abundant defect sites. NOCNTs can be obtained by the thermal treatment of NCNTs (the sample of polymer pyrolysis in N₂) in air, and the oxygen content was increased. However, the destruction of the tubular structure led to poor electrochemical properties. These results proved the importance of the thin-walled tubular structure to the electrochemical properties. Surely, this strategy for preparing thin-walled carbon nanotubes can be widely extended to the preparation of other nanomaterials with thin-walled structures.

Recent advances in cathode materials for rechargeable lithium-sulfur batteries

Lithium-sulfur batteries (Li-S) are regarded as a promising candidate for next-generation energy storage systems due to their high specific capacity (1675 mA h g^-1) and energy density (2600 W h kg^-1) as well as the abundance, safety and low cost of sulfur materials. However, many disadvantages hinder the further development of Li-S batteries, such as the insulating nature of the active materials, the dissolution of intermediate products, large volume expansion and safety concerns related to metal lithium anodes. During the past decade, tremendous efforts have been made in the design and synthesis of electrode materials. In this review, we briefly discuss the electrochemical mechanism of Li-S batteries and their practical problems. Then, we systematically summarize the current strategies for designing cathode materials with stable and long cycling performance, including sulfur cathodes and Li₂S cathodes; subsequently, the current development of solid-state electrolytes and protective strategies for lithium metal anodes are briefly discussed. Finally, the current challenges and future perspectives of Li-S batteries are presented.

One-step synthesis of MOF-derived Ga/Ga2O3@C dodecahedra as an anode material for high-performance lithium-ion batteries

A Ga/Ga₂O₃@C dodecahedron composite with a high specific capacity of about 542 mA h g^-1 after 200 cycles at the current density of 1000 mA g^-1 was synthesized by one-step hydrogen reduction. This hierarchical homogeneous structure combined the Ga, Ga₂O₃ and carbon frameworks (from Ga-MOF) to exhibit excellent electrochemical performance.

NASICON-Structured NaTi2(PO4)3 for Sustainable Energy Storage

Several emerging energy storage technologies and systems have been demonstrated that feature low cost, high rate capability, and durability for potential use in large-scale grid and high-power applications. Owing to its outstanding ion conductivity, ultrafast Na-ion insertion kinetics, excellent structural stability, and large theoretical capacity, the sodium superionic conductor (NASICON)-structured insertion material NaTi2(PO4)3 (NTP) has attracted considerable attention as the optimal electrode material for sodium-ion batteries (SIBs) and Na-ion hybrid capacitors (NHCs). On the basis of recent studies, NaTi2(PO4)3 has raised the rate capabilities, cycling stability, and mass loading of rechargeable SIBs and NHCs to commercially acceptable levels. In this comprehensive review, starting with the structures and electrochemical properties of NTP, we present recent progress in the application of NTP to SIBs, including non-aqueous batteries, aqueous batteries, aqueous batteries with desalination, and sodium-ion hybrid capacitors. After a thorough discussion of the unique NASICON structure of NTP, various strategies for improving the performance of NTP electrode have been presented and summarized in detail. Further, the major challenges and perspectives regarding the prospects for the use of NTP-based electrodes in energy storage systems have also been summarized to offer a guideline for further improving the performance of NTP-based electrodes.

ZIF-67-Derived N-Doped Co/C Nanocubes as High-Performance Anode Materials for Lithium-Ion Batteries

Co nanoparticles embedded in nitrogen-doped carbon nanocubes (Co/NCs) for applications as anode materials in rechargeable lithium-ion batteries were synthesized by calcining Co-based metal-organic framework. Sizes of Co nanoparticles were ∼15 nm according to X-ray diffraction (XRD) and transmission electron microscopy. Electrochemical performances of the as-prepared anode nanocube composite at 700 °C showed a high initial capacity of 1375.1 mAh g^-1 in the voltage range of 0.01-3.0 V at the current rate of 0.1 A g^-1. After 100 cycles, capacity remained at 688.6 mAh g^-1. Thereinto, the role of Co nanoparticles in electrochemical reaction was also elucidated by in situ XRD experiment. Capacity increase of Co/NCs at the high currents was observed, which are potentially caused by the activation of electrode and pseudocapacitance during cycling. High surface area and abundant mesopores contributed to the improved electrochemical performances of the anode, providing numerous pathways and sites for Li⁺ transfer and storage and accordingly contributing to pseudocapacitance capacity.

Tailored Ni2P nanoparticles supported on N-doped carbon as a superior anode material for Li-ion batteries

The Ni₂P/NPC composite effectively buffers volume expansion and improves electrochemical performances by creating more defects on the surface, indicating overwhelming superiority in energy storage applications.