Aggregation-induced emission enhancement of yellow photoluminescent carbon dots for highly selective detection of environmental and intracellular copper(II) ions

Portable smartphone platform utilizing AIE-featured carbon dots for multivariate visual detection for Cu2+, Hg2+ and BSA in real samples

Heavy metals cause serious toxic threats to both environment and human health. The multivariate, instrument-free, portable, and rapid detection strategy is crucial for determination of heavy metals. Herein, aggregation-induced emission (AIE) featured carbon dots (SN-CDs) were fabricated hydrothermally by optimizing co-doping precursors. With bright yellow emission at 560 nm, the SN-CDs were utilized for multivariate sensing Cu2+, Hg2+ and bovine serum albumin (BSA) based on AIE behavior and static quenching effect, with detection limits of 0.46 μmol·L-1, 25.8 nmol·L-1 and 1.52 μmol·L-1. A portable smartphone platform was constructed to enable portable, prompt, and sensitive analysis for Cu2+, Hg2+, and BSA via different strategies in real water and food samples with satisfied recovery. Moreover, a logic gate circuit was designed to provide the possibilities for utilization of intelligent facility. The proposed AIE SN-CDs possessing great contribution in preferable sensing performance, present promising prospects in real-time monitoring of environment and food safety.

Multiemitting Ultralong Phosphorescent Carbonized Polymer Dots via Synergistic Enhancement Structure Design

Advancing a metal-free room temperature phosphorescent (RTP) material that exhibits multicolor emission, remarkable RTP lifetime, and high quantum yield still faces the challenge of achieving intersystem crossing between singly and triplet excited states, as well as the rapid decay of triplet excited states due to nonradiative losses. In this study, a novel strategy is proposed to address these limitations by incorporating o-phenylenediamine, which generates multiple luminescent centers, and long-chain polyacrylic acid to synthesize carbonized polymer dots (CPDs). These CPDs are then embedded in a rigid B2O3 matrix, effectively limiting nonradiative losses through the synergistic effects of polymer cross-linking and the rigid matrix. The resulting CPD-based materials exhibit remarkable ultralong phosphorescence in shades of blue and lime green, with a visible lifetime of up to 49 s and a high phosphorescence quantum yield. Simultaneously, this study demonstrates the practical applicability of these excellent material properties in anti-counterfeiting and information encryption.

A dual-mode sensing platform coupling two-signal ratiometric and colorimetric methods for detecting Au3+ based on surface state-regulated carbon nanodot

The considerable risk posed by Au3+ residues to the environment and human health has sparked interest in researching Au3+ monitoring techniques. The detection results in the usual ratio mode are more reliable. In this work, we develop a dual-mode strategy based on reducing carbon dots coupling with two-signal ratiometric and colorimetric methods for high-sensitivity, good-selectivity, and wide-range detection of Au3+. Cyan carbon dots (C-CDs) were synthesized by a simple and efficient one-step hydrothermal method. The C-CDs with rich amino group used m-phenylenediamine as carbon source, which made it have the potential as a reducing agent. After the addition of Au3+, Au3+ was reduced to Au0, generating stable gold nanoparticles (AuNPs). The fluorescence signal (F490) of C-CDs decreased. At the same time, the large size of AuNPs enhances the second-order scattering signal (S770) and produces the UV-visible absorption peak of AuNPs. Therefore, the dual-mode sensing strategy combining S770/F490 ratiometric and colorimetric detection of Au3+ is realized with high accuracy and sensitivity. Au3+ was determined in real samples and a good recovery was obtained. The dual-mode method has good performance and practicality, so it shows great potential for environment testing in a simple and reliable way.

Functionalized Green Carbon dots for Specific Detection of Copper in Human Serum Samples and Living Cells

Intracellular copper ion (Cu2+) is irreplaceable and essential in regulation of physiological and biological processes, while excessive copper from bioaccumulation may cause potential hazards to human health. Hence, effective and sensitive recognition is urgently significant to prevent over-intake of copper. In this work, a novel highly sensitive and green carbon quantum dots (Green-CQDs) were synthesized by a low-cost and facile one-step microwave auxiliary method, which utilized gallic acid, carbamide and PEG400 as carbon source, nitrogen source and surface passivation agent, respectively. The decreased fluorescence illustrated excellent linear relationship with the increasing of Cu2+ concentration in a wide range. Substantial surface amino and hydroxyl group introduced by PEG400 significantly improved selectivity and sensitivity of Green-CQDs. The surface amino chelation mechanism and fluorescence internal filtration effect were demonstrated by the restored fluorescence after addition of EDTA. Crucially, the nanosensor illustrated good cell permeability, high biocompatibility and recovery rate, significantly practical application in fluorescent imaging and biosensing of intracellular Cu2+ in HepG-2 cells, which revealed a potential and promising biological applications in early diagnosis and treatment of copper ion related disease.

Carbon dots-based fluorescence enhanced probe for the determination of glucose

In this work, a novel "turn-on" fluorescence sensor for the detection of H2O2 and glucose was developed based on green fluorescent carbon dots (CDs). The CDs was newly prepared by a facile one-pot hydrothermal method with Eosin Y and branched polyethylenimine as precursors. Interestingly, in the presence of H2O2 and HRP, the fluorescence of the CDs enhanced significantly with a red-shift emission due to their "aggregation". Meanwhile, the oxidation of glucose catalyzed by glucose oxidase could generate H2O2. Thus, a simple sensing system based on the CDs as fluorescent probes was constructed for H2O2 and glucose determination, avoiding the fluorescence quenching and subsequent recovery process in conventional turn-on strategy. The method showed good selectivity and sensitivity for glucose sensing with the detection limit of 0.12 μM. The method was further applied to glucose detection in real samples. The obtained results demonstrated the simplicity, selectivity and practicality of the method. This work expands the carbon nanomaterials with fluorescence emission enhancement properties. It provides a new and direct "turn-on" strategy for H2O2 and glucose detection, which could be a simple and effective tool for screening biological substances involved in H2O2-generation reaction.

Bright Green-Emissive Carbon Nanodots for Sensing and Intracellular Imaging of Cu2+ and Glutathione

Green-emissive carbon nanodots (CDs) with high quantum yield are prepared. The abundant functional groups on the surfaces of CDs can selectively interact with Cu2+. The formed cupric amine complexes induce significant fluorescence quenching. The "on-off" switching can be further adjusted to the fluorescence "on" mode by the introduction of glutathione (GSH), which hinders the interactions between CDs and Cu2+. Based on the fantastic optical behavior of CDs, highly sensitive detection of Cu2+ and GSH can be achieved. Intracellular imaging of the two targets is also validated.

Carbon dots with aggregation-induced emission enhancement (AIEE) for detection of Zr4+/ Hf4+ and PTP1B activity

The frequent use of Zirconium (Zr) and Hafnium (Hf) in modern industries may result in serious environment issues, and thus developing analytical methods to facilitate the control of these two resembled metal elements is urgently needed. However, up to now, rapidly and conveniently detecting Zr⁴⁺ and Hf⁴⁺ is still full of challenge. In this study, nitrogen and sulfur co-doped carbon dots (N, S-Cdots) with aggregation-induced emission enhancement (AIEE) were prepared and used for turn-on detection of Zr⁴⁺ and Hf⁴⁺ within 10 min. The photoluminescent intensity of N, S-Cdots showed a good linear correlation with Zr⁴⁺ and Hf⁴⁺concentrations ranging from 0 to 30 μM with the limit of detection (LOD) of 0.47 and 0.53 μM, respectively. Furthermore, this fluorometric assay was successfully used for quantitative analysis of Zr⁴⁺ and Hf⁴⁺ in real water samples with satisfactory recoveries in the range of 91.16-108.50% and 90.28-106.49%, respectively. Finally, the developed N, S-Cdots sensing system was used for assay PTP1B activity and screening its inhibitor with Zr⁴⁺ as the medium. Our work demonstrated that the as-prepared N, S-Cdots with AIEE can offer a simple and reliable alternative for rapid detection of Zr⁴⁺ and Hf⁴⁺ in water samples, in addition to being potential useful in phosphatase analysis and drug discovery.

Current Progress of Ratiometric Fluorescence Sensors Based on Carbon Dots in Foodborne Contaminant Detection

Carbon dots (CDs) are widely used in the detection of foodborne contaminants because of their biocompatibility, photoluminescence stability, and ease of chemical modification. In order to solve the interference problem of complexity in food matrices, the development of ratiometric fluorescence sensors shows great prospects. In this review, the progress of ratiometric fluorescence sensors based on CDs in foodborne contaminant detection in recent years will be summarized, focusing on the functionalized modification of CDs, the fluorescence sensing mechanism, the types of ratiometric fluorescence sensors, and the application of portable devices. In addition, the outlook on the development of the field will be presented, with the development of smartphone applications and related software helping to better enable the on-site detection of foodborne contaminants to ensure food safety and human health.

Peptide-modified carbon dot aggregates for ultrasensitive detection of lipopolysaccharide through aggregation-induced emission enhancement

This study fabricated yellow-emitting CDs (Y-CDs) by hydrothermal treatment of citric acid and urea and applied them as a fluorescence turn-on platform for sensitive and selective detection of lipopolysaccharide (LPS) based on the non-shifted AIEE of peptide-stabilized CD aggregates. The designed peptide (named K3) consisting of aggregation-active and LPS-recognition units triggered the aggregation of Y-CDs, switching on their fluorescence through the blue-shifted AIEE process. The formed K3-stabilized Y-CD aggregates (K3-YCDAs) specifically interacted with LPS at neutral pH, demonstrating that the sequence of the decorated peptide was highly connected with their selectivity and sensitivity. The K3-YCDAs provided a fast response time (within 5 min) to detect LPS with a quantification range of 0.5-100.0 nM and a limit of detection (LOD, signal-to-noise ratio of 3) of 300.0 pM. By integrating ultrafiltration membranes as a concentration device with K3-YCDAs as a sensing probe, the LOD for LPS was further reduced to 3.0 pM. The determination of picomolar levels of plasma LPS by the K3-YCDAs coupled to the centrifugation ultrafiltration was demonstrated to fall within the specificity range of clinical interest for sepsis patients. Also, the K3-YCDAs served as a fluorescent probe to selectively image and quantify E. coli cells. The distinct advantages of the K3-YCDAs for LPS include fast response time, wide linear range, low detection limit, and excellent selectivity compared to previously reported sensors.

Seed germination studies on Chickpeas, Barley, Mung beans and Wheat with natural biomass and plastic waste derived C-dots

Agronomical providence of nanoparticles in enhancing food productivity has brought new revolution in agricultural sector. However, the comprehensive ingenuity of their synergetic impact on environment and living flora and fauna is still poorly explored. The current study endeavours to tackle this apprehension by systematically exploring the agronomical paradigm of six different types of C-dots derived from natural biomass and plastic waste on the four different types of seeds viz. black chick peas (Cicer arietinum), barley (Hordeum vulgare), mung beans (Vigna radiata) and wheat (Triticum aestivum) at room temperature. C-dots have displayed a dose responsive effect (250 to 5000 mg/L) on the growth of chosen seeds, including the elongation of root length and coleoptile length. The development of seedlings under atmospheric conditions exhibited excellent physiological stability in presence of synthesized C-dots for all types of seeds with concentrations as high as 3000 mg/L for dry seed. The direct exposure of C-dots resulted in enhanced growth as compared to the water exposure and considered as the most important novel aspect of present work. The developed C-dots provide more nutrient content and easy penetration to the seeds due to their enhanced surface area and very small size. The germination and Vigor index have also been augmented in presence of C-dots after 7 days of exposure. C-dots have affected the chlorophyll content in mung beans as a function of time and concentration. The developed C-dots possess excellent biocompatible behaviour and help in the complete growth of the different types of seeds which suggest their enhanced utilization in the agronomical field. This is one of the detailed studies, which explore the impact of C-dots on widely used food crops with the non-toxic and biocompatible C-dots. The information achieved herein will allow the usage of C-dots as a capable nanopriming agent for the natural germination of seeds.

Cadmium induced aggregation of orange-red emissive carbon dots with enhanced fluorescence for intracellular imaging

Cadmium is a notorious toxic heavy metal, that poses serious threat to human health. Sensitive and selective detection of cadmium in cells is of great significance in poison screening and disease diagnosis. Orange-red emissive carbon dots (OR-CDs), prepared from the calcination of selected carbon sources 5-amino-1, 10-phenanthroline (Aphen) and salicylic acid (SA), were found to act as a "turn on" type fluorescence probe for Cd²⁺ detection. The structure and optical properties of OR-CDs were comprehensively investigated by both experimental characterizations and density functional theory (DFT) calculations. The OR-CDs consist of a basic unit of nine aromatic rings, and the N/O binding sites on the OR-CDs can specifically bind with Cd²⁺, leading to aggregation induced enhanced emission (AIEE). A detection limit of 0.30 μM was achieved for Cd²⁺ with a linear range of 0.80-100 μM. OR-CDs can not only be used for intracellular Cd²⁺ imaging but also have the potential to alleviate cadmium poison in living organisms.

Ion-Imprinted Polymer-on-a-Sensor for Copper Detection

The accumulation of metal ions in the body is caused by human activities and industrial uses. Among these metal ions, copper is the third most abundant ion found in the human body and is indispensable for health because it works as a catalyst in the iron absorption processes. However, high doses of copper ions have been reported to generate various diseases. Different types of sensors are used to detect metal ions for several applications. To design selective and specific recognition sites on the sensor surfaces, molecular imprinting is one of the most used alteration methods to detect targets by mimicking natural recognition molecules. In this study, an ion-imprinted polymer-integrated plasmonic sensor was prepared to selectively detect copper (Cu(II)) ions in real-time. Following different characterization experiments, the Cu(II)-imprinted plasmonic sensor was employed for kinetic, selectivity, and reusability studies. According to the results, it was observed that this sensor can measure with 96% accuracy in the Cu(II) concentration range of 0.04-5 μM in buffer solution. The limit of detection and limit of quantification values were computed as 0.027 µM and 0.089 µM. The results also showed that this plasmonic sensor works successfully not only in a buffer solution but also in complex media such as plasma and urine.

Lighting up of carbon dots for copper(II) detection using an aggregation-induced enhanced strategy

Carbon dots have promising prospects for analytical and monitoring purposes, but are greatly hindered by the aggregation-induced luminescence quenching owing to the π-π interaction or the non-radiation-excited radical complex formation. Herein hydrothermally prepared orange-yellow fluorescent carbon dots (O-CDs) show an aggregation-induced fluorescence enhancement (AIFE) with Cu²⁺ owing to the complexation of Cu(II) and the O-CDs. Cu²⁺ was then sensitively and selectively detected in the linear range from 0.02 to 30 μM with the detection limit of 14 nM, making the detection of Cu²⁺ in fresh water and E. coli lysate successful, showing that the as-prepared O-CDs could be well applied to the environmental monitoring of heavy metals.

The highly sensitive “turn-on” detection of morin using fluorescent nitrogen-doped carbon dots

Graphic diagram of the synthesis of the N-CDs and the N-CDs based fluorescent sensor for the determination of morin.

Chitosan and κ-carrageenan-derived nitrogen and sulfur co-doped carbon dots "on-off-on" fluorescent probe for sequential detection of Fe3+ and ascorbic acid

This study develops a high sensitive and selective "on-off-on" fluorescent probe for sequential detection of iron ion (Fe³⁺) and ascorbic acid (AA) based on nitrogen and sulfur co-doped carbon dots (N, S-CDs), which were synthesized by using chitosan and κ-carrageenan as raw materials through one-step hydrothermal protocol. The synthesized N,S-CDs possess particularly high quantum yield (QY = 59.31%), excellent stability and excitation dependent behavior, showing great potential for practical applications. Furthermore, N,S-CDs provided high selectivity and strong anti-interference to Fe³⁺ due to its fluorescence quenching performance, revealing a wide linear concentration range from 1 to 100 μM for the detection of Fe³⁺ ion with an extremely low limit of detection of 57 nM, and presented reliable and accurate results in actual sample detection of Fe³⁺. The overall fluorescence quenching mechanism of N,S-CDs with Fe³⁺ was due to the formation of N,S-CDs/Fe³⁺ initiated to the aggregation and electron transfer of N,S-CDs, resulting in the static quenching of fluorescence. More interestingly, AA could reduce Fe³⁺ to Fe²⁺ and efficaciously recover the quenched fluorescence of N,S-CDs/Fe³⁺. N,S-CDs/Fe³⁺ as "turn-on" fluorescent probe was further applied for detecting AA in a linear range of 0.5-90 μM with a detection limit of 38 nM.

Ratiometric fluorescence probe of Cu2+ and biothiols by using carbon dots and copper nanoclusters

A novel dual-emission ratiometric fluorescent probe based on N-doped yellow fluorescent carbon dots (y-CDs) and blue fluorescent copper nanoclusters (CuNCs) was established for quantitative determination of Cu²⁺ and biothiols. In this work, the Cu²⁺-(y-CDs) complexes formed by the chelation of y-CDs with Cu²⁺, showed an absorption peak at 430 nm that not only enhanced the fluorescence of y-CDs through inhibiting photoinduced electron transfer (PET) but also effectively quenched the fluorescence of CuNCs due to Förster resonance energy transfer (FRET). In addition, the chelation of y-CDs with Cu²⁺ could be inhibited by biothiols that prevented the fluorescence of y-CDs from being enhanced and the fluorescence of CuNCs from being quenched. On account of the changes of ratiometric signal, a dual-emission fluorescence probe for Cu²⁺ and biothiols determination was achieved. The proposed method exhibited high sensitivity for Cu²⁺ and biothiols in the ranges of 0.5-100 μM and 0.8-50 μM and the limits of detection (LODs) of Cu²⁺, glutathione (GSH), cysteine (Cys) and homocysteine (Hcy) were 0.21 μM, 0.33 μM, 0.39 μM and 0.46 μM, respectively. Subsequently, the established strategy presented an application prospect for the detection of Cu²⁺ and biothiols in real samples.

Multifunctional Biomedical Applications of Nitrogen and Sulfur Co-Doped Carbon Dots

Multifunctional carbon dots have drawn considerable attention due to their potential biomedical application value. We report the preparation of blue-green fluorescence-emitting, multifunctional, nitrogen-and-sulfur co-doped carbon dots (N, S-CDs) synthesized via a one-step process using 1-thioglycerol as a sulfur source, glucose and citric acid as carbon sources, and polyethyleneimine as a nitrogen source. Because of abundant amino and sulfur content, the CDs exhibited high sensibility and selectivity for detecting Cu₂₊ (detection limit: 0.01 μM, linear range: 0.025 to 50 μM). Fast and sensitive detection of tiopronin was also achieved on the basis of the fluorescence "off-on" mode considering the strong affinity between tiopronin and Cu₂₊. The N, S-CDs exhibited good biocompatibility as determined by fluorescence imaging using onion epidermal cells and gram-positive bacteria. The CDs also exhibited excellent antimicrobial ability against the gram-positive bacteria. Our results indicate that these novel N, S-CDs could be ideal candidates for several biochemical applications such as antibacterial treatment and detection of small biomolecules.

Nucleoside-based fluorescent carbon dots for discrimination of metal ions

Carbon dots (Cdots) play an important role in many biological and chemical applications. To prepare strongly fluorescent Cdots, the starting material should contain nitrogen in addition to carbon. Nucleobases are nitrogen rich with interesting metal binding properties. In this work, we prepared a series of Cdots with citrate as the carbon source, and ethylenediamine, adenosine, cytidine, thymidine or guanosine as the respective nitrogen sources. The resulting Cdots were all fluorescent with the ethylenediamine sample being the most strongly emissive. These Cdots were then tested for their metal sensitivity and all tested metal ions can quench their fluorescence. The fluorescence of the G-Cdots prepared with guanosine was quenched most efficiently by Cu2+, while the Cdots prepared with ethylenediamine were more sensitive to Hg2+. With the differential quenching by different metal ions, we prepared a sensor array to discriminate multiple metal ions, and quantified Cu2+ and Hg2+ at the same time. Our work has expanded the range of starting materials for preparing Cdots and showed that by tuning the precursor composition, Cdots with different optical and metal binding properties can be obtained, which is useful in constructing a sensing platform for a large number of metal ions.

Single optical sensor to multiple functions: Ratiometric sensing for SO32- and dual signal determination for copper (II)

Polymer dots possess superior emissive features, but most of them give rise to luminescence bands in the blue region. In addition, blue or green emissions have difficulty in penetrating tissue deeply. Therefore, long wavelength emissive signals are welcome for the development and application of polymeric dots towards sensing and bio-analysis. Herein, the color-tunable fluorescence polymer nanoparticles (F-PNPs) have been synthesized via one-step strategy based on the employment of hydroquinone and polyethyleneimine as precursors at low temperature. Moreover, its emission peak can be shifted from 523 nm to 612 nm by varying the excitation wavelength in the range of 380 nm to 480 nm. In view of sensing assessment, F-PNPs enable the quantitative determination of trace amount of SO₃^2- and Cu²⁺. In the presence of SO₃^2-, the polymer dots exhibit ratiometric fluorescence signals in deionized water and the color change from green to blue has been clearly observed by naked eyes (detection limit = 59 nM). In addition, two emission bands at 545 nm (green) and 601 nm (red) are observed to be responsive to the exposure of Cu²⁺. The entire dual sensing system for the detection of Cu²⁺ will be more accurate and reliable. The evaluation results reveal their optical signals are improved linearly due to the addition of Cu²⁺ at increasing concentrations and the detection limits are calculated to be 76 nM (green) and 41 nM (red), respectively. Such polymeric network will provide a new dynamic platform for sensing purposes in biomedicine study, environmental protection, and food safety.

Ultrasound lighting up AIEgens for potential surgical navigation

Multifunctional contrast-enhanced agents suitable for application in surgical navigation by taking advantage of the merits of their diverse imaging modalities at different surgical stages are highly sought-after. Herein, an amphipathic polymer composed of aggregation-induced emission fluorogens (AIEgens) and Gd³⁺ chelates was successfully synthesized and assembled into ultrasound responsive microbubbles (AIE-Gd MBs) to realize potential tri-modal contrast-enhanced ultrasound (US) imaging, magnetic resonance imaging (MRI), and AIEgen-based fluorescence imaging (FI) during the perioperative period. Through ultrasound targeted microbubble destruction (UTMD) and cavitation effect, the as-prepared AIE-Gd MBs went through a MBs-to-nanoparticles (NPs) conversion, which not only resulted in targeted accumulation in tumor tissues but also led to stronger fluorescence being exhibited due to the more aggregated AIE-Gd molecules in the NPs. As a proof-of-concept, our work proposes a strategy of US-lit-up AIEgens in tumors which could offer a simple and powerful tool for surgical navigation in the future.

Preparation of Yellow Fluorescent N,O-CDs and its Application in Detection of ClO. J Fluoresc 2021;31:659-666. [PMID: 33534115 DOI: 10.1007/s10895-021-02686-4]

Accurate and efficient detection of ClO^- was extremely important due to the harm of ROS in the environment and organism. In this paper, yellow fluorescent N,O-CDs were successfully prepared by the solvothermal method. The microscopic size of the N,O-CDs was approximately spherical with an average particle size of 4.8 ± 0.8 nm. The fluorescence quantum yield in ethanol solution was calculated as 10.5 % using fluorescein as the standard reference. The as-fabricated N,O-CDs had high sensitivity and low detection limit (7.5 µM) for quantitatively detecting ClO^- with a linear range from 0.07 mM to 0.16 mM. The probe not only shows good selectivity and anti-interference to metal ions, anions and amino acids but also has excellent light stability and thermal stability. Also, a wide selection range for pH was demonstrated.

Upcycling of plastic waste into fluorescent carbon dots: An environmentally viable transformation to biocompatible C-dots with potential prospective in analytical applications

The profitable impact on ecological system made the upcycling of plastic waste as one of the captivating issues in scientific world. The current work highlights the sustainable approach to transform the plastic waste comprises of bottles, used cups and polyethylene bags via simple heating to fluorescent carbon dots (C-dots). The obtained C-dots have displayed the absorption peaks around at 260 nm with size ranging between 5 and 30 nm. The upcycling has produced the structural changes in plastic waste and affected the optical properties of C-dots. The three types of used plastic waste as precursor have displayed excellent emission properties with peak positioned around 422 nm and quantum yield (QY) values ∼62, 65 and 64% for C-dots generated from plastic polybags, cups and bottles (P-CDs, C-CDs and B-CDs) respectively. The toxicity profiling of C-dots has been successfully tested by employing multi-assay biocompatible activities i.e. antibacterial and antifungal activities. The potential prospective of C-dots derived from plastic waste have further been explored in analytical applications involving selective copper metal ion sensing in aqueous media. The outcomes of the current studies have highlighted the potential accomplishment in preserving environment fate and giving response towards the budding social hitch of plastic waste.

A novel copper ion sensing fluorescent probe for fast detection of pyrophosphate and alkaline phosphatase

A Cu²⁺ sensing fluorescent probe is synthesized via a Mannich reaction and is applied in the fluorescence detection of pyrophosphate and alkaline phosphatase.

N,S-co-doped carbon dots for rapid acid test paper and bioimaging

Fluorescent N,S-CDs with a quantum yield of 37.8% were synthesized via a one-pot solvothermal method. Detailed characterizations on physical, chemical and optical properties have been investigated. N,S-CDs demonstrated remarkably quenched and enhanced fluorescence in acidic and basic media. Direct qualitative analysis in pH sensor and cell imaging were preliminarily studied.

Transforming glucose into fluorescent graphene quantum dots via microwave radiation for sensitive detection of Al3+ ions based on aggregation-induced enhanced emission

This paper initially describes a nanosensor for fluorescence detection of Al3+ ions by using graphene quantum dots (GQDs) that are synthesized via microwave-assisted single-step ring-closure condensation of glucose molecules. The one-pot synthesis strategy based on the microwave radiation could be finished in several minutes and no post-modification of the GQDs was required. In particular, the GQD nanoprobes showed a sensitive and specific fluorescence enhancement response to Al3+. The involved mechanism might be the Al3+-mediated aggregation of the GQDs leading to aggregation-induced enhanced emission (AIEE). Under optimal conditions, this new fluorescent nanosensor was able to quantitatively detect Al3+ in a linear concentration range of 0.4-500 μM. The limit of detection was estimated to be ∼59.8 nM according to the 3σ rule, which made it be among the most sensitive systems currently available for sensing the target ion. Moreover, satisfactory recovery results (ranging from 96.8 to 109.7%) of analyzing a set of real water examples additionally validated its accuracy for practical applications. Considering its simplicity, high sensitivity and specificity, low cost, and good reliability, the developed fluorescent nanosensing system for Al3+ holds great promise for broad uses in water safety, environmental monitoring, and waste management.

One-step preparation of red-emitting carbon dots for visual and quantitative detection of copper ions

A one-step solvothermal method for the preparation of carbon dots with red fluorescence (R-CDs) was put forward, in which sodium citrate and formamide were chosen as precursors, while formamide was adopted as the solvent. The fluorescence emission peak of the as-prepared R-CDs remained the same (600 nm) when the excitation wavelength increased from 490 nm to 560 nm, and the fluorescence quantum yield is 35.3%. Furthermore, the fluorescence intensity of the as-prepared R-CDs could be selectively quenched by copper ions, and the mechanism of Cu²⁺ quenching R-CDs is the combination of static and dynamic quenching. As a result, the R-CDs were applied for the construction of a fluorescent sensor without any modification for the quantitative and visual detection of copper ions, which is a typical contaminant in water. The limit of detection for the fluorescent sensor was as low as 5 nmol/L, and it can be used to fast and directly confirm whether the content of copper ions in drinking water meets the criteria of the United States Environmental Protection Agency and the World Health Organization.

Synthesis of green-emitting carbon quantum dots with double carbon sources and their application as a fluorescent probe for selective detection of Cu2+ ions

Green-emitting carbon quantum dots (G-CQDs) were prepared using tartaric acid and bran by one-pot solvothermal treatment and had photoluminescence quantum yields (PL QY) as high as 46%. The morphology of the G-CQDs is characterized by TEM, which shows the average diameter of G-CQDs is approximately ∼4.85 nm. The FT-IR spectra display the presence of –OH, C–N, N–H and –COOH on the surface of the G-CQDs. The emission wavelength of the G-CQDs was ∼539 nm in the case of ∼450 nm excitation wavelength, which corresponds to the green fluorescence. Furthermore, the G-CQDs were used as a fluorescent probe for detection Cu²⁺ ions, and demonstrated a linear distribution between ln(F/F₀) and the Cu²⁺ ions concentration. Specifically, the Cu²⁺ ion concentration should fall in the G-CQD concentration range of 0–0.5 mM and the detection limit is 0.0507 μM. Thus, due to the excellent chemical stability and good luminescence performance, these G-CQDs could be excellent probes widely used in detection fields.

Green-emitting carbon quantum dots (G-CQDs) were prepared using tartaric acid and bran by one-pot solvothermal treatment and had photoluminescence quantum yields (PL QY) as high as 46%.

Smilax China-derived yellow-fluorescent carbon dots for temperature sensing, Cu2+ detection and cell imaging

Here, we report an environmentally friendly fabrication strategy of bright yellow fluorescent carbon dots (y-CDs) and construct a rapid and accurate multifunctional sensing platform for the effective detection of temperature and Cu²⁺.