Taming heterogeneous rhenium catalysis for the production of biomass-derived chemicals

O2 activation by subnanometer Re-Pt clusters supported on TiO2(110): exploring adsorption sites

Activation of O2 by subnanometer metal clusters is a fundamental step in the reactivity and oxidation processes of single-cluster catalysts. In this work, we examine the adsorption and dissociation of O2 on RenPtm (n + m = 5) clusters supported on rutile TiO2(110) using DFT calculations. The adhesion energies of RenPtm clusters on the support are high, indicating significant stability of the supported clusters. Furthermore, the bimetallic Re-Pt clusters attach to the surface through the Re atoms. The oxygen molecule was adsorbed on three sites of the supported systems: the metal cluster, the surface, and the interface. At the metal cluster site, the O2 molecule binds strongly to RenPtm clusters, especially on the Re-rich clusters. O2 activation occurs by charge transfer from the metal atoms to the molecule. The dissociation of O2 on the RenPtm clusters is an exothermic process with low barriers. As a result, sub-nanometer Re-Pt clusters can be susceptible to oxidation. Similar results are obtained at the metal-support interface, where both the surface and cluster transfer charge to O2. To surface sites, molecular oxygen is adsorbed onto the Ti5c atoms with moderate adsorption energies. The polarons, which are produced by the interaction between the metal cluster and the surface, participate in the activation of the molecule. However, dissociating O2 in these sites is challenging due to the endothermic nature of the process and the high energy barriers involved. Our findings provide novel insights into the reactivity of supported clusters, specifically regarding the O2 activation by Re-Pt clusters on rutile TiO2(110).

Highly Efficient Iridium-Iron-Molybdenum Catalysts Condensed on Boron Nitride for Biomass-Derived Diols' Hydrogenolysis to Secondary Monoalcohols

A trade-off of activity-selectivity exists in primary C-O hydrogenolysis of biomass-derived diols to secondary alcohols over bimetallic catalysts, especially the combination of noble metal and early transition metal in the metallic state and metal oxide state, respectively. Herein, the combination of high surface concentration of boron nitride (BN)-supported metals and the addition of Mo as third metal broke the trade-off. High yields (>50%) of secondary alcohols were obtained with robust productivity up to 25-fold based on Ir over Ir-Fe0.13-Mo0.08/BN (Ir = 20 wt %, Fe/Ir = 0.13, Mo/Ir = 0.08) than previously reported Ir-Fe catalysts. In contrast, simply increasing the loading amount of Ir-Fe catalysts or the addition of Mo species only enhanced the productivity by <2-4-fold. Various characterizations showed that large Ir loading enables the formation of condensed nanostructures (∼2 nm) on the BN support, which further alloy with Mo and Fe to form an face centred cubic (fcc)-type trimetallic alloy with surface enrichment of Fe. On the other hand, in Ir-Fe0.25-Mo0.08/BN with lower Ir (5 wt %) and lower Ir-based activity, the Mo species were rather bound on the support surface possibly as the MoBx state. These structures were formed by simple impregnation and reduction with H2 at the reaction temperature (453 K). The high activity of Ir-Fe0.13-Mo0.08/BN (20 wt % Ir) is derived from two aspects: (1) the formation of condensed nanostructures (∼2 nm) exposing more active sites and (2) alloying with Mo to modify the electronic state of Ir to enhance the H2 activation ability, as shown by the decreased Ea (82-84 → 67 kJ mol-1).

Deoxydehydration of Biomass-Derived Polyols Over Silver-Modified Ceria-Supported Rhenium Catalyst with Molecular Hydrogen

Olefin production from polyols via deoxydehydration (DODH) was carried out over Ag-modified CeO₂ -supported heterogeneous Re catalysts with H₂ as a reducing agent. Both high DODH activity and low hydrogenation ability for C=C bonds were observed in the reaction of erythritol, giving a 1,3-butadiene yield of up to 90 % under "solvent-free" conditions. This catalyst is applicable to other substrates such as methyl glycosides (methyl α-fucopyranoside: 91 % yield of DODH product; methyl β-ribofuranoside: 88 % yield), which were difficult to be converted to the DODH products over the DODH catalysts reported previously. ReO_x -Ag/CeO₂ was reused 3 times without a decrease of activity or selectivity after calcination as regeneration. Although the transmission electron microscopy energy-dispersive X-ray spectroscopy and X-ray absorption fine structure analyses showed that Re species were highly dispersed and Ag was present as metal particles with various sizes from well-dispersed species (<1 nm) to around 5 nm particles, the catalysts prepared from size-controlled Ag nanoparticles showed similar performance, indicating that the catalytic performance is insensitive to the Ag particle size.

Transition metal-catalyzed deoxydehydration: missing pieces of the puzzle

Deoxydehydration (DODH) is a transformation that converts a vicinal diol into an olefin with the help of a sacrificial reductant.

Reduction of sugar derivatives to valuable chemicals: utilization of asymmetric carbons

Recent progress on non-furfural routes from sugar derivatives to valuable chemicals including chiral chemicals was reviewed.

Tungsten–zirconia-supported rhenium catalyst combined with a deoxydehydration catalyst for the one-pot synthesis of 1,4-butanediol from 1,4-anhydroerythritol

Biomass-derived 1,4-anhydroerythritol is reduced to 1,4-butanediol over a reusable mixture of heterogeneous catalysts, ReO_x–Au/CeO₂ and ReO_x/WO₃–ZrO₂.

Recent Advances in the Deoxydehydration of Vicinal Diols and Polyols

Deoxydehydration (DODH) is one of the most promising tools to reduce the oxygen content of biomass (sugars and polyols) and provide analogues of platform chemicals that are derived from fossil resources. This reaction converts a vicinal diol into an alkene and is typically catalyzed by high-oxidation-state metal-oxo compounds in the presence of a stoichiometric reductant, with examples of both homogeneous and heterogeneous systems. This minireview will highlight the developments in this field over the past 5 years and focus on efforts to solve the problems that currently prevent DODH being performed on a commercial scale, including the nature of the reductant, substrate scope and selectivity, and catalyst recovery and expense.