Efficient antimicrobial properties of layered double hydroxide assembled with transition metals via a facile preparation method

Understanding the nanoscale adhesion forces between the fungal pathogen Candida albicans and antimicrobial zinc-based layered double hydroxides using single-cell and single-particle force spectroscopy

Antifungal resistance has become a very serious concern, and Candida albicans is considered one of the most opportunistic fungal pathogens responsible for several human infections. In this context, the use of new antifungal agents such as zinc-based layered double hydroxides to fight such fungal pathogens is considered one possible means to help limit the problem of antifungal resistance. In this study, we show that ZnAl LDH nanoparticles exhibit remarkable antifungal properties against C. albicans and cause serious cell wall damage, as revealed by growth tests and atomic force microscopy (AFM) imaging. To further link the antifungal activity of ZnAl LDHs to their adhesive behaviors toward C. albicans cells, AFM-based single-cell spectroscopy and single-particle force spectroscopy were used to probe the nanoscale adhesive interactions. The force spectroscopy analysis revealed that antimicrobial ZnAl LDHs exhibit specific surface interactions with C. albicans cells, demonstrating remarkable force magnitudes and adhesion frequencies in comparison with non-antifungal negative controls, e.g., Al-coated substrates and MgAl LDHs, which showed limited interactions with C. albicans cells. Force signatures suggest that such adhesive interactions may be attributed to the presence of agglutinin-like sequence (Als) adhesive proteins at the cell wall surface of C. albicans cells. Our findings propose the presence of a strong correlation between the antifungal effect provided by ZnAl LDHs and their nanoscale adhesive interactions with C. albicans cells at both the single-cell and single-particle levels. Therefore, ZnAl LDHs could interact with C. albicans fungal pathogens by specific adhesive interactions through which they adhere to fungal cells, leading to their damage and subsequent growth inhibition.

Bioinspired fabrication of zinc hydroxide-based nanostructure from lignocellulosic biomass Litchi chinensis leaves and its efficacy evaluation on antibacterial, antioxidant, and anticancer activity

Zinc-based nanostructures are known for their numerous potential biomedical applications. In this context, the biosynthesis of nanostructures using plant extracts has become a more sustainable and promising alternative to effectively replace conventional chemical methods while avoiding their toxic impact. In this study, following a low-temperature calcination process, a green synthesis of Zn-hydroxide-based nanostructure has been performed using an aqueous extract derived from the leaves of Litchi chinensis, which is employed as a lignocellulose waste biomass known to possess a variety of phytocompounds. The biogenic preparation of Zn-hydroxide based nanostructures is enabled by bioactive compounds present in the leaf extract, which act as reducing and capping agents. In order to evaluate its physicochemical characteristics, the produced Zn-hydroxide-based nanostructure has been subjected to several characterization techniques. Further, the multifunctional properties of the prepared Zn-hydroxide-based nanostructure have been evaluated for antioxidant, antimicrobial, and anticancer activity. The prepared nanostructure showed antibacterial efficacy against Bacillus subtilis and demonstrated its anti-biofilm activity as evaluated through the Congo red method. In addition, the antioxidant activity of the prepared nanostructure has been found to be dose-dependent, wherein 91.52 % scavenging activity could be recorded at 200 μg/ml, with an IC50 value of 45.22 μg/ml, indicating the prepared nanostructure has a high radical scavenging activity. Besides, the in vitro cytotoxicity investigation against HepG2 cell lines explored that the as-prepared nanostructure exhibited a higher cytotoxic effect and 73.21 % cell inhibition could be noticed at 25.6 μg/ml with an IC50 of 2.58 μg/ml. On the contrary, it was found to be significantly lower in the case of HEK-293 cell lines, wherein ~47.64 % inhibition could be noticed at the same concentration. These findings might be further extended to develop unique biologically derived nanostructures that can be extensively evaluated for various biomedical purposes.

Facile fabrication of a 2D/2D CoFe-LDH/g-C3N4 nanocomposite with enhanced photocatalytic tetracycline degradation

The widespread use of tetracycline (TC) in medicine and agriculture has caused severe pollution problems in the environment. In this work, a nanocomposite comprising of CoFe-layered double hydroxides grown on graphitic carbon nitride nanosheets (CoFe-LDH/g-C₃N₄) with a notable two-dimensional/two-dimensional (2D/2D) heterostructure was synthesized through a facile co-precipitation method. The CoFe-LDH/g-C₃N₄ nanocomposite displayed significantly improved visible-light-driven photocatalytic activity towards TC degradation, compared to pristine g-C₃N₄ and CoFe-LDH alone. The enhanced activation efficiency was a result of intimate interfacial contact, enlarged the surface area, broadened visible-light absorbance, and enhanced photogenerated electron transfer. The scavenging experiments showed that holes (h⁺) and superoxide radical anions (‧O₂^-) played a crucial role in TC degradation. Factors including the type of TCs, initial concentration of TC, presence of ions, and the type of water matrix were investigated to evaluate the practical feasibility of the nanocomposites for TC removal from antibiotics-contaminated water. The repeated tests showed that the nanocomposites possessed good stability and recyclability. This study demonstrated the feasibility of achieving photocatalytic activity enhancement of g-C₃N₄ through the formation of a 2D-2D heterostructure between LDHs and g-C₃N₄.

Green Synthesis of Zn(OH)2/ZnO-Based Bionanocomposite using Pomegranate Peels and Its Application in the Degradation of Bacterial Biofilm

The ability and potency of bacterial species to form biofilms, which show antibiotic resistance thereby avoiding antibiotic surfaces, is a major cause of prolonged infections. Various advanced approaches have been employed to prevent or damage bacterial biofilms, formed by a variety of bacterial strains, to help prevent the associated infectious disease. In this context, zinc-based nanostructures have been recognized as a potential antibiotic agent against a broad spectrum of bacterial communities. As a result, a sustainable and green synthesis method was adapted in the present study to synthesize a Zn(OH)₂/ZnO-based bionanocomposite, in which aqueous extracts of waste pomegranate peels (Punica granatum) were employed as a natural bioreducing agent to prepare the bionanocomposite at room temperature. Furthermore, FT-IR, XRD, DLS, UV-Visible, PL spectroscopy, FE-SEM, and TEM were used to characterize the green route synthesized a Zn(OH)₂/ZnO bionanocomposite. The average crystallite size was determined using the Scherrer relation to be 38 nm, and the DLS results indicated that the Zn(OH)₂/ZnO bionanocomposite had a hydrodynamic size of 170 nm. On the other hand, optical properties investigated through UV-Vis and PL spectroscopy explored the energy bandgap between 2.80 and 4.46 eV, corresponding to the three absorption edges, and it covered the blue spectrum when the sample was excited at 370 nm. Furthermore, the impact of this green route synthesized a Zn(OH)₂/ZnO bionanocomposite on the biofilm degradation efficiency of the pathogenic bacterial strain Bacillus subtilis PF_1 using the Congored method was investigated. The Congored assay clearly explored the biofilm degradation efficiency in the presence of a 50 mg/mL and 75 mg/mL concentration of the Zn(OH)₂/ZnO bionanocomposite against the bacterial strain Bacillus subtilis PF_1 grown for 24 h. This study can be further applied to the preparation of bionanocomposites following a low-cost green synthesis approach, and thus prepared nanostructures can be exploited as advanced antimicrobial agents, which could be of great interest to prevent various infectious diseases.

Understanding the role of surface interactions in the antibacterial activity of layered double hydroxide nanoparticles by atomic force microscopy

Understanding the mechanisms of the interactions between zinc-based layered double hydroxides (LDHs) and bacterial surfaces is of great importance to improve the efficiency of these antibiotic-free antibacterial agents. In fact, the role of surface interactions in the antibacterial activity of zinc-based LDH nanoparticles compared to that of dissolution and generation of reactive oxygen species (ROS) is still not well documented. In this study, we show that ZnAl LDH nanoparticles exhibit a strong antibacterial effect against Staphylococcus aureus by inducing serious cell wall damages as revealed by the antibacterial activity tests and atomic force microscopy (AFM) imaging, respectively. The comparison of the antibacterial properties of ZnAl LDH nanoparticles and micron-sized ZnAl LDHs also demonstrated that the antibacterial activity of Zn-based LDHs goes beyond the simple dissolution into Zn²⁺ antibacterial ions. Furthermore, we developed an original approach to functionalize AFM tips with LDH films in order to probe their interactions with living S. aureus cells by means of AFM-based force spectroscopy (FS). The force spectroscopy analysis revealed that antibacterial ZnAl LDH nanoparticles show specific recognition of S. aureus cells with high adhesion frequency and remarkable force magnitudes. This finding provides a first insight into the antibacterial mechanism of Zn-based LDHs through direct surface interactions by which they are able to recognize and adhere to bacterial surfaces, thus damaging them and leading to subsequent growth inhibition.

Layered double hydroxide-based nanomaterials for biomedical applications

Against the backdrop of increased public health awareness, inorganic nanomaterials have been widely explored as promising nanoagents for various kinds of biomedical applications. Layered double hydroxides (LDHs), with versatile physicochemical advantages including excellent biocompatibility, pH-sensitive biodegradability, highly tunable chemical composition and structure, and ease of composite formation with other materials, have shown great promise in biomedical applications. In this review, we comprehensively summarize the recent advances in LDH-based nanomaterials for biomedical applications. Firstly, the material categories and advantages of LDH-based nanomaterials are discussed. The preparation and surface modification of LDH-based nanomaterials, including pristine LDHs, LDH-based nanocomposites and LDH-derived nanomaterials, are then described. Thereafter, we systematically describe the great potential of LDHs in biomedical applications including drug/gene delivery, bioimaging diagnosis, cancer therapy, biosensing, tissue engineering, and anti-bacteria. Finally, on the basis of the current state of the art, we conclude with insights on the remaining challenges and future prospects in this rapidly emerging field.

Removal of Fluoride from Phosphogypsum Leaching Solution with Phosphate Tailing Based Layered Double Hydroxides: Kinetics and Equilibrium Isotherms

In this work, ternary and quaternary layered double oxides (PTB-LDO3 and PTB-LDO4) based on phosphate tailings were synthesized by the coprecipitation method. The as-prepared samples were characterized and applied to remove fluorine ions from a phosphogypsum leaching solution. The results indicated that both the precursor of PTB-LDO3 and PTB-LDO4 showed a layered structure with characteristic diffraction peaks of hydrotalcite. Compared with PTB-LDO4, PTB-LDO3 exhibited better adsorption performance at pH 5–6 and a dosage of 0.04 mg L−1. The adsorption kinetics results revealed that the adsorption of fluorine by PTB-LDO3 and PTB-LDO4 reached the adsorption equilibrium in about 3 h, and followed the pseudo-second-order model. The adsorption data could be fitted better with the Langmuir isotherm with the maximum adsorption amounts of 26.03 mg g−1 and 15.66 mg g−1 for PTB-LDO3 and PTB-LDO4, respectively. The adsorption of fluorine by PTB-LDO3 and PTB-LDO4 were both spontaneous and exothermic, and exhibited excellent reusability and stability. This study provides a possibility for the combined treatment of phosphorus chemical solid waste (phosphorus tailings) and phosphorus chemical wastewater (phosphogypsum leaching liquid).

Direct contact, dissolution and generation of reactive oxygen species: How to optimize the antibacterial effects of layered double hydroxides

Infections by pathogenic bacteria have been threatening several fields as food industries, agriculture, textile industries and healthcare products. Layered double hydroxides materials (LDHs), also called anionic clays, could be utilized as efficient antibacterial materials due to their several interesting properties such as ease of synthesis, tunable chemical composition, biocompatibility and anion exchange capacity. Pristine LDHs as well as LDH-composites including antibacterial molecules and nanoparticles loaded-LDHs were proven to serve as efficient antibacterial agents against various Gram-positive and Gram-negative bacterial strains. The achieved antibacterial effect was explained by the following mechanisms: (1) Direct contact between the materials and bacterial cells driven by electrostatic interactions between positively charged layers and negatively charged cell membranes, (2) Dissolution and gradual release over time of metallic ions or antibacterial molecules, (3) Generation of reactive oxygen species.

Investigating the Impact of the Washing Steps of Layered Double Hydroxides (LDH) on the Electrochemical Performance

The washing of layered double hydroxides (LDH) material is mostly purposed to discard the unreacted products after the reaction has been completed. However, this study demonstrated that the washing stage can also be targeted to optimise the electrochemical performance of LDH by using an appropriate solvent. Solvents, namely, ethanol, acetone, and an ethanol–acetone solution (2:1) were used for the washing of LDH and the impacts thereof on the structural, physical, chemical, morphological, and electrochemical properties were investigated. Using Williamson–Hall analysis, we observed modifications on the crystalline domain. The specific surface area and pore parameters for all the samples were also differently affected. The Fourier transform infrared (FTIR) measurements displayed evident changes in the basic sites. The electrochemical performances of samples were analysed. The sample washed with the ethanol–acetone solution exhibited a specific capacitance of 1807.26 Fg⁻¹ at 10 mVs⁻¹, which is higher than that of other samples as well as low internal resistance compared to its counterpart. This demonstrates that the use of an appropriate solvent during the washing stage of LDH affects the electrochemical properties.

Silver-Modified β-Cyclodextrin Polymer for Water Treatment: A Balanced Adsorption and Antibacterial Performance

Water pollution caused by organic pollutants and pathogenic microorganism is a critical issue. In this study, we reported a silver-modified β-cyclodextrin polymer (CD-CA/PDA-Ag) used for the removal of dyes and the suppression of microorganisms from water. In order to avoid silver nanoparticles agglomeration, the material was first coated with polydopamine (PDA) on β-cyclodextrin matrix, whose reducing catechol groups subsequently immobilized silver ions in situ to form uniformly dispersed silver nanoparticles. CD-CA/PDA-0.5Ag displayed a high adsorption capacity of methylene blue (535.93 mg/g), which is mainly attributed to electrostatic interactions, host-guest inclusions and π-π bond stacking effects. Furthermore, both diffusion inhibition zone tests and colony formation unit tests were investigated, which showed excellent antimicrobial capability on Escherichia coli (E. coli) and Staphylococcus aureus (S. auerus). Overall, CD-CA/PDA-Ag proved to have an excellent adsorption capacity and antibacterial performance, which provides a great potential in water purification.

Layered double hydroxide-based nanocomposite scaffolds in tissue engineering applications

Layered double hydroxides (LDHs), when incorporated into biomaterials, provide a tunable composition, controllable particle size, anion exchange capacity, pH-sensitive solubility, high-drug loading efficiency, efficient gene and drug delivery, controlled release and effective intracellular uptake, natural biodegradability in an acidic medium, and negligible toxicity. In this review, we study potential applications of LDH-based nanocomposite scaffolds for tissue engineering. We address how LDHs provide new solutions for nanostructure stability and enhance in vivo studies' success.

Comparative antibacterial activity of 2D materials coated on porous-titania

Plasma electrolytic oxidation (PEO) is a well-established technique for the treatment of titanium-based materials. The formed titania-PEO surface can improve the osseointegration properties of titanium implants. Nevertheless, it can not address bacterial infection problems associated with bone implants. Recently, 2-dimensional (2D) materials such as graphene oxide (GO), MXene, and hexagonal boron nitride (hBN) have received considerable attention for surface modifications showing their antibacterial properties. In this paper, a comparative study on the effect of partial deposition of these three materials over PEO titania substrates on the antibacterial efficiency and bioactivity is presented. Their partial deposition through drop-casting instead of continuous film coating is propsed to simultaneously address both antibacterial and osseointegration abilities. Our results demonstrate the dose-dependent nature of the deposited antibacterial agent on the PEO substrate. GO-PEO and MXene-PEO samples showed the highest antibacterial activity with 70 (±2) % and 97 (±0.5) % inactivation of S. aureus colonies in the low concentration group, respectively. Furthermore, only samples in the higher concentration group were effective against E. coli bacteria with 18 (±2) % and 17 (±4) % decrease in numbers of colonies for hBN-PEO and GO-PEO samples, respectively. Moreover, all antibacterial samples demonstrated acceptable bioactivity and good biocompatibility, making them a considerable candidates for the next generation of antibacterial titanium implants.

A review on optical sensors based on layered double hydroxides nanoplatforms

In recent years, significant efforts have been devoted towards the fabrication and application of layered double hydroxides (LDHs) due to their tremendous features such as excellent biocompatibility with negligible toxicity, large surface area, high conductivity, excellent solubility, and ion exchange properties. Most impressive, LDHs offer a favorable environment to attach several substances such as quantum dots, fluorescein dyes, proteins, and enzymes, which leads to strengthening the catalytic properties or increasing the sensing selectivity and sensitivity of the resulted hybrids. With the extensive ongoing research on the application of nanomaterials, many studies have led to remarkable achievements in exploring LDHs as sensing nanoplatforms. In optical sensors, for instance, many sensing strategies were tailored based on the enzyme-mimicking properties of LDHs, including colorimetric and chemiluminescence procedures. Meanwhile, others were designed based on intercalating some fluorogenic substrates on the LDHs, whereby the sensing signal can be acquired by quenching or enhancing their fluorescence after the addition of analytes. In this review, we aim to summarize the recent advances in optical sensors that use layered double hydroxides as sensing platforms for the determination of various analytes. By outlining some representative examples, we accentuate the change of spectral absorbance, chemiluminescence, and photoluminescence phenomena triggered by the interaction of LDH or functionalized-LDH with the indicators and analytes in the system. And finally, current limitations and possible future orientation in designing further LDHs-based optical sensors are presented. It is hoped that this review will be helpful in assisting the establishment of more improved sensors based on LDHs features. Optical sensors based on layered double hydroxides (LDHs) nanoplatforms were reviewed. The sensing system and detection approaches were rationally reviewed. Possible future orientations were highlighted.

Advanced drug delivery applications of layered double hydroxide

Layered double hydroxides (LDHs), also known as anionic clays or hydrotalcite-like compounds, are a class of nanomaterials that attained great attention as a carrier for drug delivery applications. The lamellar structure of this compound exhibits a high surface-to-volume ratio which enables the intercalation of therapeutic agents and releases them at the target site, thereby reducing the adverse effect. Moreover, the intercalated drug can be released in a sustained manner, and hence the frequency of drug administration can be decreased. The co-precipitation, ion exchange, manual grinding, and sol-gel methods are the most employed for their synthesis. The unique properties like the ease of synthesis, low cost, high biocompatibility, and low toxicity render them suitable for biomedical applications. This review presents the advances in the structure, properties, method of preparation, types, functionalization, and drug delivery applications of LDH. Also, this review provides various new conceptual insights that can form the basis for new research questions related to the drug delivery applications of LDH.