Ultrafast O2 activation by copper oxide for 2,4-dichlorophenol degradation: The size-dependent surface reactivity

Stable and recyclable FeS-CMC-based peroxydisulfate activation for effective bisphenol A reduction: performance and mechanism

In this study, a novel material, iron sulfide modified by sodium carboxymethyl cellulose (FeS-CMC), was successfully synthetized for peroxydisulfate (PDS) activation to remove bisphenol A (BPA). Characterization results showed that FeS-CMC had more attachment sites for PDS activation due to its higher specific surface area. A stronger negative potential contributed to preventing nanoparticles from reuniting in the reaction and improving the interparticle electrostatic interactions of the materials. Fourier transform infrared spectrometer (FTIR) analysis of FeS-CMC suggested that the coordination of the ligand for combining sodium carboxymethyl cellulose (CMC) with FeS was monodentate. A total of 98.4% BPA was decomposed by the FeS-CMC/PDS system after 20 min under optimized conditions (pH = 3.60, [FeS-CMC] = 0.05 g/L and [PDS] = 0.88 mM). The isoelectric point (pH_pzc) of FeS-CMC is 5.20, and FeS-CMC contributed to reducing BPA under acidic conditions but showed a negative effect under basic conditions. The presence of HCO₃^-, NO₃^- and HA inhibited BPA degradation by FeS-CMC/PDS, while excess Cl^- accelerated the reaction. FeS-CMC exhibited excellent performance in oxidation resistance with a final removal degree of 95.0%, while FeS was only 20.0%. Furthermore, FeS-CMC showed excellent reusability and still reached 90.2% after triple reusability experiments. The study confirmed that the homogeneous reaction was the primary part of the system. Surface-bound Fe(II) and S (-II) were found to be the major electron donors during activation, and the reduction of S (-II) contributed to the cycle of Fe(III)/Fe(II). Sulfate radicals (SO₄^•-), hydroxyl radicals (•OH), superoxide radicals (O₂^•-) and singlet oxygen (¹O₂) were produced at the surface of FeS-CMC and accelerated the decomposition of BPA. This study offered a theoretical basis for improving the oxidation resistance and reusability of iron-based materials in the presence of advanced oxidation processes.

Pencil-like Hollow Carbon Nanotubes Embedded CoP-V4P3 Heterostructures as a Bifunctional Catalyst for Electrocatalytic Overall Water Splitting

Electrocatalytic water splitting is one of the most efficient ways of producing green hydrogen energy. The design of stable, active, and efficient electrocatalysts plays a crucial role in water splitting for achieving efficient energy conversion from electrical to hydrogen energy, aimed at solving the lingering energy crisis. In this work, CNT composites modified with CoP-V₄P₃ composites (CoVO-10-CNT-450P) were formed by carbonising a pencil-like precursor (Co₃V₂O₈-H₂O) and growing carbon nanotubes in situ, followed by in situ phosphorylation on the carbon nanotubes. In the HER electrocatalytic process, an overpotential of only 124 mV was exhibited at a current density of 10 mA cm^-2. In addition, as an OER catalyst, a low overpotential of 280 mV was attained at a current density of 10 mA cm^-2. Moreover, there was no noticeable change in the performance of the catalyst over a 90 h test in a continuous total water splitting experiment. The unique electronic structure and hollow carbon nanotube structure of CoVO-10-CNT-450P effectively increased the catalytic active sites, while also significantly improving the electrocatalytic activity. This work provides theoretical guidance for the design and synthetic route of high-performance non-precious metal electrocatalysts, and actively promotes the commercial application of electrochemical water splitting.

Facilely tuning the intrinsic catalytic sites of the spinel oxide for peroxymonosulfate activation: From fundamental investigation to pilot-scale demonstration

Heterogeneous peroxymonosulfate (PMS)-based advanced oxidation processes (AOPs) have shown a great potential for pollutant degradation, but their feasibility for large-scale water treatment application has not been demonstrated. Herein, we develop a facile coprecipitation method for the scalable production (∼10 kg) of the Cu-Fe-Mn spinel oxide (CuFeMnO). Such a catalyst has rich oxygen vacancies and symmetry-breaking sites, which endorse it with a superior PMS-catalytic capacity. We find that the working reactive species and their contributions are highly dependent on the properties of target organic pollutants. For the organics with electron-donating group (e.g., -OH), high-valent metal species are mainly responsible for the pollutant degradation, whereas for the organics with electron-withdrawing group (e.g., -COOH and -NO2), hydroxyl radical (•OH) as the secondary oxidant also plays an important role. We demonstrate that the CuFeMnO-PMS system is able to achieve efficient and stable removal of the pollutants in the secondary effluent from a municipal wastewater plant at both bench and pilot scales. Moreover, we explore the application prospect of this PMS-based AOP process for large-scale wastewater treatment. This work describes an opportunity to scalably prepare robust spinel oxide catalysts for water purification and is beneficial to the practical applications of the heterogeneous PMS-AOPs.

Catalytic Oxygen Activation over the Defective CuO Nanoparticles for Ultrafast Dehalogenation

The nucleophilic superoxide radical (O₂^•-)-based dehalogenation reaction shows great potential to degrade the toxic halogenated organic compounds (HOCs). But such an O₂^•--mediated reductive reaction often suffers from the competition of the secondary oxidative species (e.g., •OH), leading to inferior electron efficiency and possible disinfection byproduct formation. Here, an O₂^•--dominant ultrafast dehalogenation system is developed via molecular O₂ activation by the oxygen vacancy (OV)-rich CuO nanoparticles (nCuO). The nCuO delivers a remarkable dechlorination rate constant of 3.92 × 10^-2 L min^-1 m^-2 for 2,4-dichlorophenol, much higher than that of the conventional zerovalent (bi)metals. The absorbed O₂ on the nCuO surface is exclusively responsible for O₂^•- generation, and its reactivity increases with the elevated OV content because of the enhanced orbital hybridization between the O p- and Cu d-orbitals. More importantly, the ubiquitous carbonate species firmly bound to the surface OVs block the formation of the secondary oxidative species via H₂O₂ activation, assuring the dominant role of the in situ generated O₂^•- for the selective HOC dehalogenation. The carbonate-deactivated OVs of the nCuO can be feasibly recovered via air annealing for sustainable dehalogenation. This work provides a new opportunity for selective O₂^•- generation via interfacial defect engineering for dehalogenation and other environmental applications.

Highly Efficient Oxygen-Activated Self-Cleaning Membranes Prepared by Grafting a Metal-Organic Framework-Derived Catalyst

In this study, an efficient oxygen-activated self-cleaning membrane was successfully prepared by grafting a metal-organic framework-devised catalyst (CuNi-C) onto a membrane surface, resulting in enhanced filtration performance and self-cleaning capability based on oxygen activation under mild conditions. The pore features, surface roughness, and surface hydrophilicity of the prepared membrane were analyzed and used to determine the causes of the enhanced filtration performance; the results showed that an increase in the porosity and surface roughness enhanced the permeate flux, and enhanced adsorption capacity and surface hydrophobicity improved the membrane removal efficiency. The self-cleaning mechanism was elucidated by identifying the reactive oxygen species (ROS) and detecting catalytic element valences. The results revealed that zero-valent Cu embedded into the membrane surface effectively activated natural dissolved oxygen (DO) to generate ROS that degraded organic pollutants. In this study, catalytic oxidation with DO as the oxidant was successively integrated with membrane separation to prevent membrane fouling, providing a novel direction for the development of multifunctional membranes.

Revealing the heterogeneous activation mechanism of peroxydisulfate by CuO: the critical role of surface-binding organic substrates

Heterogeneous catalytic activation mechanisms of peroxydisulfate (PDS) by transition metal oxides are generally attributed to the interactions between catalysts and PDS, however, the role of the co-existed organic substrate was largely overlooked in the past studies. In this work, phenol was selected as the target organic pollutant in a CuO/PDS system to evaluate its deep-seated role in participating in the effective activation of PDS. First, optimized reaction conditions as pH of 6.0, CuO of 5.96 g·L^-1 and PDS of 2.5 mM were obtained by the response surface methodology (RSM) with a phenol degradation efficiency of 84.0%. It was further found that pre-adsorption of phenol or PDS led to obviously different performances in the phenol degradation with/without the radical scavengers. Two different activation pathways of PDS, i.e., the non-radical pathway mediated by surface deprotonated phenol to generate ¹O₂ and the radical pathway mediated by structural Cu(I)/Cu(II) to produce SO₄^-, were therefore proposed, and the former was predominant in the CuO/PDS/phenol system. In addition, HCO₃^- and HPO₄^2- could strongly inhibit the phenol degradation while Cl^- and NO₃^- only performed negligible effects. NaOH washing could regenerate the surface hydroxyl groups and recover the catalytic ability of CuO. The result of this study integrated the interactions among the catalyst, oxidant and substrate, providing new insights into environmental-friendly PDS activation processes.

Designed polymeric conjugation motivates tunable activation of molecular oxygen in heterogeneous organic photosynthesis

Photocatalytic oxidative organic reactions are important synthetic transformations, and research on reaction selectivity by reactive oxygen species (ROS) is significant. To date, however, there has rarely been any focus on the directed generation of ROSs. Herein, we report the first identification of tunable molecular oxygen activation induced by polymeric conjugation in nonmetallic conjugated microporous polymers (CMP). The conjugation between these can be achieved by the introduction of alkynyl groups. CMP-A with an alkynyl bridge facilitates the intramolecular charge mobility while CMP-D, lacking an alkynyl group enhances the photoexcited carrier build-up on the surface from diffusion. These different processes dominate the directed ROS generation of the superoxide radical (O₂^-) and singlet oxygen (¹O₂), respectively. This theory is substantiated by the different performances of these CMPs in the aerobic oxidation of sulfides and the dehydrogenative coupling of amines, and could provide insight into the rational design of CMPs for various heterogeneous organic photosynthesis.

In Situ-Formed Phenoxyl Radical on the CuO Surface Triggers Efficient Persulfate Activation for Phenol Degradation

Transition-metal oxide (M_xO_y)-based persulfate (PDS) activation processes have demonstrated enormous potential for pollutant degradation in water purification. However, the mechanistic insight of PDS activation by a M_xO_y catalyst concerning the mediate role of the organic substrate remains obscure. Here, we demonstrated that the in situ-formed phenoxyl radical on the CuO surface can trigger efficient persulfate activation for phenol degradation. The formation of the phenoxyl radical was an inner-sphere process, which involved the successive steps of chemisorption through surface hydroxyl group substitution and the subsequent spontaneous electron transfer reaction from adsorbed phenol to CuO. The organic substrate phenol can be oxidized by the PDS molecule and surface-bound SO₄^•- through the nonradical and free-radical pathways, respectively. Such a unique "half-radical" mechanism resulted in an extraordinarily high PDS utilization efficiency of 188.9%. More importantly, a general rule for phenoxyl radical formation was concluded; it can be formed in the cases of organic substrates with a Hammett constant σ⁺ lower than -0.02 and metal ion of a 3d subshell between half-filled and fully filled. This study clarifies the mediate role of the organic substrate for interfacial PDS activation on M_xO_y and also gives new insights into the rational design of a highly efficient M_xO_y catalyst for selective phenolic/aniline pollutant degradation in wastewater.

Diclofenac degradation based on shape-controlled cuprous oxide nanoparticles prepared by using ionic liquid

Persulfate oxidation technology is widely used in wastewater treatment, but there are still many disadvantages, such as high energy consumption, side reaction and narrow pH applicability. Copper oxides can activate persulfate steadily with higher efficiency. In this paper, a novel preparation method of shape-controlled cuprous oxide (Cu₂O) nanoparticles featured with high catalytic performance was explored. It was found that adding ionic liquid 1-butyl-3-methylimidazolium bromide ([BMIM]Br) during preparation of Cu₂O can improve the degradation rate of diclofenac (DCF). Cu₂O nanoparticles possess good stability in consecutive cycling tests, which was confirmed by X-ray photoelectron spectroscopy. The possible mechanism of Cu₂O activating persulfate at different initial pH conditions was discussed based on electron paramagnetic resonance spin-trapping experiment. It was found that DCF was efficiently degraded in the Cu₂O/peroxydisulfate (PDS) system within a broad pH range from 5 to 11. It proved via a quenching experiment that the activation process of PDS mainly occurs on the surface layer of Cu₂O nanoparticles. As a result, shape-controlled Cu₂O nanoparticles prepared by ionic liquid are expected to be used for in situ chemical oxidation, which is an effective oxidation processes to degrade DCF remaining in surface water and ground water.