Boron-iron nanochains for selective electrocatalytic reduction of nitrate

Electrodegradation of nitrogenous pollutants in sewage: from reaction fundamentals to energy valorization applications

The excessive accumulation of nitrogen pollutants (mainly nitrate, nitrite, ammonia nitrogen, hydrazine, and urea) in water bodies seriously disrupts the natural nitrogen cycle and poses a significant threat to human life and health. Electrolysis is considered a promising method to degrade these nitrogenous pollutants in sewage, with the advantages of high efficiency, wide generality, easy operability, retrievability, and environmental friendliness. For particular energy devices, including metal-nitrate batteries, direct fuel cells, and hybrid water electrolyzers, the realization of energy valorization from sewage purification processes (e.g., valuable chemical generation, electricity output, and hydrogen production) becomes feasible. Despite the progress in the research on pollutant electrodegradation, the development of electrocatalysts with high activity, stability, and selectivity for pollutant removal, coupled with corresponding energy devices, remains a challenge. This review comprehensively provides advanced insights into the electrodegradation processes of nitrogenous pollutants and relevant energy valorization strategies, focusing on the reaction mechanisms, activity descriptors, electrocatalyst design, and actuated electrodes and operation parameters of tailored energy conversion devices. A feasibility analysis of electrodegradation on real wastewater samples from the perspective of pollutant concentration, pollutant accumulation, and electrolyte effects is provided. Challenges and prospects for the future development of electrodegradation systems are also discussed in detail to bridge the gap between experimental trials and commercial applications.

Highly Efficient Electrocatalytic Nitrate Reduction to Ammonia: Group VIII-Based Catalysts

The accumulation of nitrates in the environment causes serious health and environmental problems. The electrochemical nitrate reduction reaction (e-NO3RR) has received attention for its ability to convert nitrate to value-added ammonia with renewable energy. The key to effective catalytic efficiency is the choice of materials. Group VIII-based catalysts demonstrate great potential for application in e-NO3RR because of their high activity, low cost, and good electron transfer capability. This review summarizes the Group VIII catalysts, including monatomic, bimetallic, oxides, phosphides, and other composites. On this basis, strategies to enhance the intrinsic activity of the catalysts through coordination environment modulation, synergistic effects, defect engineering and hybridization are discussed. Meanwhile, the ammonia recovery process is summarized. Finally, the current research status in this field is prospected and summarized. This review aims to realize the large-scale application of nitrate electrocatalytic reduction in industrial wastewater.

Unveiling the Roles of Alloyed Boron in Hexavalent Chromium Removal Using Borohydride-Synthesized Nanoscale Zerovalent Iron: Electron Donor and Antipassivator

Nanoscale zerovalent iron synthesized using borohydride (B-NZVI) has been widely applied in environmental remediation in recent decades. However, the contribution of boron in enhancing the inherent reactivity of B-NZVI and its effectiveness in removing hexavalent chromium [Cr(VI)] have not been well recognized and quantified. To the best of our knowledge, herein, a core-shell structure of B-NZVI featuring an Fe-B alloy shell beneath the iron oxide shell is demonstrated for the first time. Alloyed boron can reduce H+, contributing to more than 35.6% of H2 generation during acid digestion of B-NZVIs. In addition, alloyed B provides electrons for Fe3+ reduction during Cr(VI) removal, preventing in situ passivation of the reactive particle surface. Meanwhile, the amorphous oxide shell of B-NZVI exhibits an increased defect density, promoting the release of Fe2+ outside the shell to reduce Cr(VI), forming layer-structured precipitates and intense Fe-O bonds. Consequently, the surface-area-normalized capacity and surface reaction rate of B-NZVI are 6.5 and 6.9 times higher than those of crystalline NZVI, respectively. This study reveals the importance of alloyed B in Cr(VI) removal using B-NZVI and presents a comprehensive approach for investigating electron pathways and mechanisms involved in B-NZVIs for contaminant removal.

Recent progress in the advanced strategies, rational design, and engineering of electrocatalysts for nitrate reduction toward ammonia

Ammonia is a valuable feedstock for most chemicals, pharmaceuticals, and fertilizer products. It is a promising carbon-free energy source. Under severe experimental circumstances (high temperature and high pressure), ammonia is manufactured industrially using the standard Haber-Bosch process. This process uses a lot of energy and emits a huge amount of CO2 into the environment. One method that is seen to be promising and could eventually replace the Haber-Bosch process is the electrocatalytic production of ammonia. However, in ambient conditions, the cleavage of the nitrogen molecule is exceedingly difficult. As a result, the yield of ammonia remains modest and the study's scope is still restricted to the lab. When the catalytic performance is significantly increased, nitrate and nitrite contaminations in water systems can be effectively removed and simultaneously transformed into energy sources if nitrites or nitrates are employed as nitrogen sources instead of nitrogen gas. This may become a new substitute for the synthesis of ammonia, but nitrate and nitrite reduction are not getting enough attention. In this review, we discuss the performance of the electrocatalytic nitrate reduction reaction, which includes cycling stability, reactivity, selectivity, and faradaic efficiency. Following this summary, we look into the crucial elements, the rate-determining step, and the reaction mechanisms that govern the performance of the nitrate reduction reaction. In order to support the practical use of the electrocatalytic nitrate reduction reaction, we finally provided a summary of the challenges and future directions guiding the design of efficient catalyst and reaction systems.

Nano zero-valent iron enhances the absorption and transport of chromium in rice (Oryza sativa L.): Implication for Cr risks management in paddy fields

Chromium (Cr) accumulating in soil caused serious pollution to cultivated land. At present, nano zero-valent iron (nZVI) is considered to be a promising remediation material for Cr-contaminated soil. However, the nZVI impact on the behavior of Cr in the soil-rice system under high natural geological background value remains unknown. We studied the effects of nZVI on the migration and transformation of Cr in paddy soil-rice by pot experiment. Three different doses of nZVI (0, 0.001 % and 0.1 % (w/w)) treatments and one dose of 0.1 % (w/w) nZVI treatment without plant rice were set up. Under continuous flooding conditions, nZVI significantly increased rice biomass compared with the control. At the same time, nZVI significantly promoted the reduction of Fe in the soil, increased the concentration of oxalate Fe and bioavailable Cr, then facilitated the absorption of Cr in rice roots and the transportation to the aboveground part. In addition, the enrichment of Fe(III)-reducing bacteria and sulfate-reducing bacteria in soil provided electron donors for Cr oxidation, which helps to form bioavailable Cr that is easily absorbed by plants. The results of this study can provide scientific basis and technical support for the remediation of Cr -polluted paddy soil with high geological background.

Advances in iron-based electrocatalysts for nitrate reduction

Excessive nitrate has been a critical issue in the water environment, originating from the burning of fossil fuels, inefficient use of nitrogen fertilizers, and discharge of domestic and industrial wastewater. Among the effective treatments for nitrate reduction, electrocatalysis has become an advanced technique because it uses electrons as green reducing agents and can achieve high selectivity through cathode potential control. The effectiveness of electrocatalytic nitrate reduction (NO₃RR) mainly lies in the electrocatalyst. Iron-based catalysts have the advantages of high activity and low cost, which are well-used in the field of electrocatalytic nitrates. A comprehensive overview of the electrocatalytic mechanism and the iron-based materials for NO₃RR are given in terms of monometallic iron-based materials as well as bimetallic and oxide iron-based materials. A detailed introduction to NO₃RR on zero valent iron, single-atom iron catalysts, and Cu/Fe-based bimetallic electrocatalysts are provided, as they are essential for the improvement of NO₃RR performance. Finally, the advantages of iron-based materials for NO₃RR and the problems in current applications are summarized, and the development prospects of efficient iron-based catalysts are proposed.

Revealing the Elusive Structure and Reactivity of Iron Boride α-FeB

Crystal structures can strongly deviate from bulk states when confined into nanodomains. These deviations may deeply affect properties and reactivity and then call for a close examination. In this work, we address the case where extended crystal defects spread through a whole solid and then yield an aperiodic structure and specific reactivity. We focus on iron boride, α-FeB, whose structure has not been elucidated yet, thus hindering the understanding of its properties. We synthesize the two known phases, α-FeB and β-FeB, in molten salts at 600 and 1100 °C, respectively. The experimental X-ray diffraction (XRD) data cannot be satisfactorily accounted for by a periodic crystal structure. We then model the compound as a stochastic assembly of layers of two structure types. Refinement of the powder XRD pattern by considering the explicit scattering interference of the different layers allows quantitative evaluation of the size of these domains and of the stacking faults between them. We, therefore, demonstrate that α-FeB is an intergrowth of nanometer-thick slabs of two structure types, β-FeB and CrB-type structures, in similar proportions. We finally discuss the implications of this novel structure on the reactivity of the material and its ability to perform insertion reactions by comparing the reactivities of α-FeB and β-FeB as reagents in the synthesis of a model layered material: Fe₂AlB₂. Using synchrotron-based in situ X-ray diffraction, we elucidate the mechanisms of the formation of Fe₂AlB₂. We highlight the higher reactivity of the intergrowth α-FeB in agreement with structural relationships.

Iron Nanoparticles Protected by Chainmail-structured Graphene for Durable Electrocatalytic Nitrate Reduction to Nitrogen

The electrochemical nitrate reduction reaction (NO₃ RR) is an appealing technology for regulating the nitrogen cycle. Metallic iron is one of the well-known electrocatalysts for NO₃ RR, but it suffers from poor durability due to leaching and oxidation of iron during the electrocatalytic process. In this work, a graphene-nanochainmail-protected iron nanoparticle (Fe@Gnc) electrocatalyst is reported. It displays superior nitrate removal efficiency and high nitrogen selectivity. Notably, the catalyst delivers exceptional stability and durability, with the nitrate removal rate and nitrogen selectivity remained ≈96 % of that of the first time after up to 40 cycles (24 h for one cycle). As expected, the conductive graphene nanochainmail provides robust protection for the internal iron active sites, allowing Fe@Gnc to maintain its long-lasting electrochemical nitrate catalytic activity. This research proposes a workable solution for the scientific challenge of poor lasting ability of iron-based electrocatalysts in large-scale industrialization.

Iron-Based Nanocatalysts for Electrochemical Nitrate Reduction

Nitrate has a high level of stability and persistence in water, endangering human health and aquatic ecosystems. Due to its high reliability and efficiency, the electrochemical nitrate reduction reaction (NO₃ RR) is regarded as the best available option for mitigating excess nitrate in water and wastewater, especially for the removal of trace levels of nitrate. One of the most critical factors in the electrochemical reduction are the catalysts, which directly affect the reaction efficiency of nitrate removal. Iron-based nanocatalysts, which have the advantages of nontoxicity, wide availability, and low cost, have emerged as a promising electrochemical NO₃ RR material in recent years. This review covers major aspects of iron-based nanocatalysts for electrochemical NO₃ RR, including synthetic methods, structural design, performance enhancement, electrocatalytic nitrate reduction test, and reduction mechanism. The recent progress of iron-based nanocatalysts for electrochemical NO₃ RR and the mechanism of functional advantages for modified structures are reviewed from the perspectives of loading, doping, and assembly strategies, in order to realize the conversion from pollutant nitrate to harmless nitrogen or ammonia and other sustainable products. Finally, challenges and future directions for the development of low-cost and highly-efficient iron-based nanocatalysts are explored.