Methods of improving the initial Coulombic efficiency and rate performance of both anode and cathode materials for sodium-ion batteries

Biomass-Derived Hard Carbon for Sodium-Ion Batteries: Basic Research and Industrial Application

Sodium-ion batteries (SIBs) have significant potential for applications in portable electric vehicles and intermittent renewable energy storage due to their relatively low cost. Currently, hard carbon (HC) materials are considered commercially viable anode materials for SIBs due to their advantages, including larger capacity, low cost, low operating voltage, and inimitable microstructure. Among these materials, renewable biomass-derived hard carbon anodes are commonly used in SIBs. However, the reports about biomass hard carbon from basic research to industrial applications are very rare. In this paper, we focus on the research progress of biomass-derived hard carbon materials from the following perspectives: (1) sodium storage mechanisms in hard carbon; (2) optimization strategies for hard carbon materials encompassing design, synthesis, heteroatom doping, material compounding, electrolyte modulation, and presodiation; (3) classification of different biomass-derived hard carbon materials based on precursor source, a comparison of their properties, and a discussion on the effects of different biomass sources on hard carbon material properties; (4) challenges and strategies for practical of biomass-derived hard carbon anode in SIBs; and (5) an overview of the current industrialization of biomass-derived hard carbon anodes. Finally, we present the challenges, strategies, and prospects for the future development of biomass-derived hard carbon materials.

Preparation and Electrochemical Performance of Na2-xLixFePO4F/C Composite Cathode Materials with Different Lithium/Sodium Ratios

With their advantages of abundant raw material reserves, safety, and low toxicity and cost, sodium-ion batteries (SIBs) have gained increasing attention in recent years. Thanks to a high theoretical specific capacity (124 mAh g-1), a high operating voltage (about 3.2 V), and a very stable three-dimensional layered structure, sodium ferric fluorophosphate (Na2FePO4F, NFPF) has emerged as a strong candidate to be used as a cathode material for SIBs. However, applications are currently limited due to the low electronic conductivity and slow ion diffusion rate of NFPF, which result in a low actual specific capacity and a high rate performance. In this study, the authors used a high-temperature solid-phase technique to produce Na2-xLixFePO4F/C (0 ≤ x ≤ 2) and evaluated the impact on electrode performance of materials with different Na+ and Li+ contents (values of x). Transmission electron microscopy (TEM) and X-ray diffraction (XRD) were also used to analyze the material's crystal structure and nanostructure. The results show that the material had the best room-temperature performance when x = 0.5. At a charge-discharge rate of 0.1 C, the first discharge-specific capacity of the resulting Na1.5Li0.5FePO4F/C cathode material was 122.9 mAh g-1 (the theoretical capacity was 124 mAh g-1), and after 100 cycles, it remained at 118 mAh g-1, representing a capacity retention rate of 96.2% and a Coulomb efficiency of 98%. The findings of this study demonstrate that combining lithium and sodium ions improves the electrochemical performance of electrode materials.

Recent Progress on Graphene-Based Nanocomposites for Electrochemical Sodium-Ion Storage

In advancing battery technologies, primary attention is paid to developing and optimizing low-cost electrode materials capable of fast reversible ion insertion and extraction with good cycling ability. Sodium-ion batteries stand out due to their inexpensive price and comparable operating principle to lithium-ion batteries. To achieve this target, various graphene-based nanocomposites fabricate strategies have been proposed to help realize the nanostructured electrode for high electrochemical performance sodium-ion batteries. In this review, the graphene-based nanocomposites were introduced according to the following main categories: graphene surface modification and doping, three-dimensional structured graphene, graphene coated on the surface of active materials, and the intercalation layer stacked graphene. Through one or more of the above strategies, graphene is compounded with active substances to prepare the nanocomposite electrode, which is applied as the anode or cathode to sodium-ion batteries. The recent research progress of graphene-based nanocomposites for SIBs is also summarized in this study based on the above categories, especially for nanocomposite fabricate methods, the structural characteristics of electrodes as well as the influence of graphene on the performance of the SIBs. In addition, the relevant mechanism is also within the scope of this discussion, such as synergistic effect of graphene with active substances, the insertion/deintercalation process of sodium ions in different kinds of nanocomposites, and electrochemical reaction mechanism in the energy storage. At the end of this study, a series of strategies are summarized to address the challenges of graphene-based nanocomposites and several critical research prospects of SIBs that provide insights for future investigations.