Efficient ozone decomposition over bifunctional Co3Mn-layered double hydroxide with strong electronic interaction

Stable O3 Decomposition by Layered Double Hydroxides: The Pivotal Role of NiOOH Transformation

Because ozone (O3) is a significant air pollutant, advanced O3 elimination technologies, particularly those under high-humidity conditions, have become an essential research focus. In this study, a nickel-iron layered double hydroxide (NiFe-LDH) was modified via intercalation with octanoate to develop an effective hydrophobic catalyst (NiFe-OAa-LDH) for O3 decomposition. The NiFe-OAa-LDH catalyst sustained its O3 decomposition rate of >98% for 48 h under conditions of 90% relative humidity, 840 L/(g·h) space velocity, and 100 ppm inlet O3 concentration. Moreover, it maintained a decomposition rate of 90% even when tested at a higher airflow rate of 2500 L/(g·h). Based on the changes induced by the Ni-OII to Ni-OIII bonds in NiFe-OAa-LDH during O3 treatment, catalytic O3 decomposition was proposed to occur in two stages. The first stage involved the reaction between the hydroxyl groups and O3, leading to the breakage of the O-H bonds, formation of NiOOH, and structural changes in the catalyst. This transformation resulted in the formation of abundant and stable hydrogen vacancies. According to density functional theory calculations, O3 can be effectively decomposed at the hydrogen vacancies with a low energy barrier during the second stage. This study provides new insights into O3 decomposition.

Space-confined manganese oxides nanosheets for efficient catalytic decomposition of ozone

Ground-level ozone has long posed a substantial menace to human well-being and the ecological milieu. The widely reported manganese-based catalysts for ozone decomposition still facing the persisting issues encompass inefficiency and instability. To surmount these challenges, we developed a mesoporous silica thin films with perpendicular nanochannels (SBA(⊥)) confined Mn3O4 catalyst (Mn3O4@SBA(⊥)). Under a weight hourly space velocity (WHSV) of 500,000 mL g-1 h-1, the Mn3O4@SBA(⊥) catalyst exhibited 100% ozone decomposition efficiency in 5 h and stability across a wide humidity range, which exceed the performance of bulk Mn3O4 and Mn3O4 confine in commonly reported SBA-15. Rapidly decompose 20 ppm O3 to a safety level below 100 μg m-3 in the presence of dust in smog chamber (60 × 60 × 60 cm) was also realized. This prominent catalytic performance can be attributed to the unique confined structure engenders the highly exposed active sites, facilitate the reactant-active sites contact and impeded the water accumulation on the active sites. This work offers new insights into the design of confined structure catalysts for air purification.

Investigation of catalytic activity of metal doped nanocages (Ni-C72 and Ni-Al36P36) for ozone decomposition to oxygen molecules

CONTEXT

The potential of Ni-C72 and Ni-Al36P36 as effective catalysts for O3 decomposition is examined by LH and ER mechanisms. The activation barrier energy and Gibbs free energy of reaction steps for O3 decomposition on Ni-C72 and Ni-Al36P36 are calculated. The ∆Eformation of Ni-C72 and Ni-Al36P36 are negative values and these structures are stable nano-catalysts. The Ni atoms are catalytic positions to adsorb the O3 and other important species of O3 decomposition by LH and ER mechanisms. The Ni-Al36P36 for O3 decomposition has lower Eacivation and more negative ∆Greaction than Ni-C72. The Eacivation value of rate-determining step for O3 decomposition by LH mechanism is lower than ER mechanism. The Ni-C72 and Ni-Al36P36 can catalyze the reaction steps of O3 decomposition by LH and ER mechanisms.

METHODS

The structures of Ni-C72 and Ni-Al36P36 nanocages and their complexes with O3 and other important species of are optimized by PW91PW91/6-311 + G (2d, 2p) model and M06-2X/cc-pVQZ model in GAMESS software. The strcutures of nanocages and their complexes with important species of O3 decomposition by LH and ER mechanisms are optimized and their frequencies are calculated in order to demonstrate that these structures are real minima on the potential energy surface.

Electrochemical detection of carmoisine in the presence of tartrazine on the surface of screen printed graphite electrode modified with nickel-cobalt layered double hydroxide ultrathin nanosheets

Toxic effluents containing azo dyes are discharged from various industries and they adversely affect water resoures, soil, aquatic ecosystems. Also, excessive use of food azo dyes can be carcinogenic, toxic, and adversely affect human health. Therefore, the determination of food azo dyes is significant from the perspective of human health and aquatic organisms. In the present work, nickel-cobalt layered double hydroxide nanosheets were prepared and analyzed by various techniques (field emission-scanning electron microscopy, X-ray diffraction, and fourier Transform-Infrared spectroscopy). Then, the screen printed graphite electrode modified with nickel-cobalt layered double hydroxide nanosheets was used for the detection of carmoisine. The nickel-cobalt layered double hydroxide nanosheets/screen printed graphite electrode significantly improved the oxidation of carmoisine by increasing the response current and lowering potentials compared to unmodified screen printed graphite electrode. Based on the findings from differential pulse voltammetry, the nickel-cobalt layered double hydroxide nanosheets/screen printed graphite electrode sensor response towards carmoisine was linear (0.3-125.0 μM) with a detection limit of 0.09 μM. A sensitivity of 0.3088 μA μM^-1 was achieved. Also, the nickel-cobalt layered double hydroxide nanosheets/screen printed graphite electrode was used for voltammetric detection of carmoisine in the presence of tartrazine. Due to the catalytic activity of prepared layered double hydroxide, the prepared sensor exhibited remarkable separation of the peaks when carmoisine and tartrazine coexist. In addition, the prepared sensor showed good stability. Finally, the proposed sensor had promising applicability for analysis of study analytes in powdered juice and lemon juice, with commendable recoveries between 97.3% and 104.8%.

Insights into thermally assisted photocatalytic overall water splitting over ZnTi-LDH in a gas–solid reaction system

H2O2 and bridge hydroxyl groups form because of water splitting. This process occurs intensely with the addition of heat, resulting in generation of more intermediates. Meanwhile, the separation of electrons and holes is accelerated by the heat.