Layered photocatalytic nanomaterials for environmental applications

In Situ Construction of CuTCPP/Bi4O5Br2 Hybrids for Improved Photocatalytic CO2 and Cr(VI) Reduction

Global warming and heavy metal pollution pose tremendous challenges to human development, and photocatalysis is considered to be an effective strategy to solve these problems. Herein, copper(II) tetra (4-carboxyphenyl) porphyrin (CuTCPP) molecules were successfully in situ loaded onto Bi4O5Br2 by a hydrothermal approach. A series of experimental results show that the light absorption capacity and photogenerated carrier separation efficiency were synchronously enhanced after the construction of CuTCPP/Bi4O5Br2 composites. Hence, the as-prepared composites possess significantly improved photocatalytic ability for both CO2 and Cr(VI) reduction. Specifically, CuTCPP/Bi4O5Br2-2 achieves a CO generation rate of 17.14 μmol g-1 under 5 h irradiation, which is twice as high as that of Bi4O5Br2 (8.57 μmol g-1). Besides, the optimized CuTCPP/Bi4O5Br2-2 also exhibits a removal rate of 61.87% for Cr(VI) within 100 min under irradiation. Furthermore, the mechanism of CO2 and Cr(VI) photoreduction was explored by in situ Fourier transform infrared spectroscopy and capture experiments, respectively. This work can be a reference toward the construction of photocatalysts with high activity for solar energy conversion.

Hydrothermally Synthesized ZnCr- and NiCr-Layered Double Hydroxides as Hydrogen Evolution Photocatalysts

The layered double hydroxides (LDHs) of transition metals are of great interest as building blocks for the creation of composite photocatalytic materials for hydrogen production, environmental remediation and other applications. However, the synthesis of most LDHs is reported only by the conventional coprecipitation method, which makes it difficult to control the catalyst's crystallinity. In the present study, ZnCr- and NiCr-LDHs have been successfully prepared using a facile hydrothermal approach. Varying the hydrothermal synthesis conditions allowed us to obtain target products with a controllable crystallite size in the range of 2-26 nm and a specific surface area of 45-83 m2∙g-1. The LDHs synthesized were investigated as photocatalysts of hydrogen generation from aqueous methanol. It was revealed that the photocatalytic activity of ZnCr-LDH samples grows monotonically with the increase in their average crystallite size, while that of NiCr-LDH ones reaches a maximum with intermediate-sized crystallites and then decreases due to the specific surface area reduction. The concentration dependence of the hydrogen evolution activity is generally consistent with the standard Langmuir-Hinshelwood model for heterogeneous catalysis. At a methanol content of 50 mol. %, the rate of hydrogen generation over ZnCr- and NiCr-LDHs reaches 88 and 41 μmol∙h-1∙g-1, respectively. The hydrothermally synthesized LDHs with enhanced crystallinity may be of interest for further fabrication of their nanosheets being promising components of new composite photocatalysts.

W-N heteroatom-interface in melon carbon nitride/N-doped tungsten oxide Z-Scheme photocatalyst toward improved photocatalytic hydrogen generation activity

The construction of heterointerface in photocatalyst is an efficient approach to boost the separation and utilization efficiency of charge carriers, which is challenging and crucial in photocatalysis. Here, the construction of melon-structured carbon nitride/N-doped WO3 (MCN/NWx) heterojunction photocatalyst was achieved by a method of prealcoholysis combined with thermal polymerization, where N-doping of WO3 was achieved in-situ in the formation of heterojunction. The promoted charge separation efficiency was realized through the charge transfer from the conduction band of N-doped WO3 to the valence band of the MCN. Density functional theory calculation results showed that the formation of the W-N heteroatom-interface led to the increase of density of states at the heterointerface and decrease of the band gap. The MCN/NWx nanocomposite featured a metallic band structure of the nanocomposite photocatalysts, resulting in the enhanced photocatalytic activity. The photocatalytic hydrogen evolution activity of the MCN/NW2 was enhanced about 2.5 times than that of MCN. This research provides a novel insight into the construction of a novel heteroatom-junction that boosts the separation efficiency of charge carriers, and thereby improves the photocatalytic activity.

Defective ReS2 Triggers High Intrinsic Piezoelectricity for Piezo-Photocatalytic Efficient Sterilization

Rhenium disulfide (ReS2) is a promising piezoelectric catalyst due to its excellent electron transfer ability and abundant unsaturated sites. The 1T' phase structure leads to the evolution of ReS2 into a centrosymmetric spatial structure, which restricts its application in piezoelectric catalysis. Herein, we propose a controllable defect engineering strategy to trigger the piezoelectric response of ReS2. The introduction of vacancy defects disrupts the initial centrosymmetric structure, which breaks the piezoelectric polarization bond and generates piezoelectric properties. By using transmission electron microscopy, we characterized it at the atomic scale and determined that vacancy defects contribute to an excellent piezoelectric property through first-principles calculations. Notably, the piezoelectric coefficient of the catalyst with 40 s-etching (ReS2@C-40) is 23.07 pm/V, an order of magnitude greater than other transition metal dichalcogenides. It demonstrated the feasibility of optimizing piezoelectric properties by increasing the conformational asymmetry. Based on its remarkable piezoelectric activity, ReS2@C-40 exhibits highly efficient piezo-photocatalytic synergistic sterilization performance with 99.99% eradication of Escherichia coli and 96.67% of Staphylococcus aureus within 30 min. This pioneering research on the coupling effect of ReS2 in piezoelectric catalysis and photocatalysis provides ideas for the development of piezo-photocatalysts and efficient water purification technologies.

Ferroelectric Polarization Modulated Facet-selective Charge Separation in Bi4 NbO8 Cl Single Crystal for Boosting Visible-light Driven Bifunctional Water Splitting

Developing bifunctional water-splitting photocatalysts is meaningful, but challenged by the harsh requirements of specific-facet single crystals with spatially separated reactive sites and anisotropic charge transfer paths contributed by well-built charge driving force. Herein, tunable ferroelectric polarization is introduced in Bi4 NbO8 Cl single crystal nanosheets to strengthen the orthogonal charge transfer channels. By manipulating the in-plane polarization from octahedral off-centering of Nb5+ and out-of-plane polarization from lone pair electron effect of anisotropic Bi3+ , both the fast charge recombination in bulk catalyst and the process of charge trapping into surface states can be effectively modulated. Collaborating with modest polarization electric field and facet junction induced built-in electric field, cooperative charge tractive force is constructed, which reinforces the spatial separation and migration of photogenerated electrons and holes to {110} reductive site facet and {001} oxidation site facet, respectively. While excessive polarization charges impair the facet-selective charge separation characteristics and conversely promote charge recombination on the surface. As a result, polarity-optimized Bi4 NbO8 Cl shows an excellent H2 and O2 evolution rate of 54.21 and 36.08 μmol ⋅ h-1 in the presence of sacrificial reagents under visible light irradiation. This work unveils the function of ferroelectric polarization in tuning the intrinsic facet-selective charge transfer process of photocatalysts.

Pyroelectric catalytic performance of Sm3+-modified Pb(Mg1/3Nb2/3)O3-PbTiO3 for organic dyes: degradation efficiency, kinetics and pyroelectric catalytic mechanism

The development of photocatalysis is hindered, in part, by the quick recombination of photogenerated carriers and the instability of light sources. In this study, the problem of too-fast electron-hole pair compounding in photocatalysis is effectively regulated by the polarization field of pyroelectric materials using the pyroelectric method. Self-polarized pyroelectric materials that depend on temperature variations can generate usable electrical energy and polarized charge carriers to degrade organic pollutants. Pb(Mg1/3Nb2/3)O3-PbTiO3 (PMN-PT) is a relaxor ferroelectric material with spontaneous polarization characteristics. The PMN-0.30PT:1 mol%Sm3+ catalyst was prepared by applying the high-temperature solid-state reaction method. Under the dark condition and nine cold-hot cycles of 23 °C-68 °C, using H2O2-assisted PMN-0.30PT:1 mol%Sm3+ as a catalyst, the degradation rate of rhodamine 6G (10 mg L-1) was 94.3 ± 2.5%. In addition, the degradation rates of 88.52% and 64.32% were obtained for rhodamine B (10 mg L-1) and methylene blue (10 mg L-1), respectively. This study provides a new approach to the pyroelectric catalytic degradation of organic pollutants.

Porphyrin Supramolecular Nanoassembly/C3N4 Nanosheet S-Scheme Heterojunctions for Selective Photocatalytic CO2 Reduction toward CO

The photocatalytic reduction of CO2 with H2O into valuable chemicals is a sustainable carbon-neutral technology for renewable energy; however, the photocatalytic activity and product selectivity remain challenging. Herein, an S-scheme heterojunction photocatalyst with superior CO2 photoreduction performance─porous C3N4 (CN) nanosheets anchored with zinc(II) tetra(4-cyanophenyl)porphyrin (ZnTP) nanoassemblies (denoted as ZnTP/CN)─was designed and prepared via a simple self-assembly process. The constructed ZnTP/CN heterojunction had rich accessible active sites, improved CO2 absorption capacity, and high charge carrier separation efficiency caused by the S-scheme heterojunction. As a result, the obtained ZnTP/CN catalyst exhibited considerable activity for photocatalytic CO2 reduction, yielding CO with a generation rate of 19.4 μmol g-1·h-1 and a high selectivity of 95.8%, which is much higher than that of pristine CN nanosheets (4.53 μmol g-1·h-1, 57.4%). In addition, theoretical calculations and in situ Fourier transform infrared spectra demonstrated that the Zn sites in the porphyrin unit favor CO2 activation and *COOH formation as well as CO desorption, thereby affording a high CO selectivity. This work provides insight into the design and fabrication of efficient S-scheme heterostructure photocatalysts for solar energy storage.

Selective Cocatalyst Decoration of Narrow-Bandgap Broken-Gap Heterojunction for Directional Charge Transfer and High Photocatalytic Properties

Narrow-bandgap semiconductors are promising photocatalysts facing the challenges of low photoredox potentials and high carrier recombination. Here, a broken-gap heterojunction Bi/Bi2 S3 /Bi/MnO2 /MnOx , composed of narrow-bandgap semiconductors, is selectively decorated by Bi, MnOx nanodots (NDs) to achieve robust photoredox ability. The Bi NDs insertion at the Bi2 S3 /MnO2 interface induces a vertical carrier migration to realize sufficient photoredox potentials to produce O2 •- and • OH active species. The surface decoration of Bi2 S3 /Bi/MnO2 by Bi and MnOx cocatalysts drives electrons and holes in opposite directions for optimal photogenerated charge separation. The selective cocatalysts decoration realizes synergistic surface and bulk phase carrier separation. Density functional theory (DFT) calculation suggests that Bi and MnOx NDs act as active sites enhancing the absorption and reactants activation. The decorated broken-gap heterojunction demonstrates excellent performance for full-light driving organic pollution degradation with great commercial application potential.

Emerging high-ammonia‑nitrogen wastewater remediation by biological treatment and photocatalysis techniques

The bacterial and photocatalysis techniques have been widely applied into the remediation of ammonia nitrogen wastewater. Although traditional microbial methods had been verified useful; more efficient, energy-saving and controllable candidate treatment methods are still urgently needed to cover the increasingly diverse ammonia nitrogen pollution cases. The bacterial treatment technique for ammonia nitrogen mainly depends on the ammonia nitrogen oxidation-reduction (e.g. nitrification, denitrification) by nitrifying bacteria and denitrifying bacteria, but these reactions suffer from slow denitrifying kinetic process and uncontrolled disproportionation reaction. In comparison, the photocatalysis technique based on photoelectrons is more efficient and has some advantages, such as low temperature reaction and long life, while the photocatalysis technique can not perform multiple complex biochemical reactions. Despite much scientific knowledge obtained about this issue recently, such research has yet not been widely adopted in the industry because of many concerns about subsequent catalyst stability and economic feasibility. This review summarized and discussed the very recent achievements and key problems on remediation of high-ammonia‑nitrogen wastewater and oxidation driven by bacterial treatment and photocatalysis techniques, as well as the most promising future directions for these two techniques, especially the potential of jointly bacterial-photocatalysis techniques.

Metal ion endogenous cycles of CoFe2O4-x induced boosted photocatalytic/PMS degradation toward polycyclic aromatic hydrocarbons

The rational design of photocatalytic nanomaterials with unique structures is critical for remediating environmental problems and thus reducing ecological risks. In this work, we employed H₂ temperature-programmed reduction to modify MFe₂O₄ (M = Co, Cu, and Zn) photocatalysts for obtaining additional oxygen vacancies. After activation of PMS, naphthalene and phenanthrene degradation rates in the soil phase were increased by 3.24-fold and 1.39-fold, respectively, and 1.38-fold for naphthalene in the aqueous phase by H-CoFe₂O_4-x. The extraordinary photocatalytic activity is attributed to the oxygen vacancies on the H-CoFe₂O_4-x surface, which promote electron transfer and thus enhance the redox cycle from Co(III)/Fe(III) to Co(II)/Fe(II). In addition, oxygen vacancies are used as electron traps to hinder the recombination of photogenerated carriers and accelerate the generation of hydroxyl and superoxide radicals. Quenching tests showed that the addition of p-benzoquinone resulted in the greatest decrease in the degradation rate of naphthalene (inhibition of about 85.5%), demonstrating that O₂˙^- radicals are the main active species in the photocatalytic degradation of naphthalene. H-CoFe₂O_4-x showed improved degradation performance in synergy with PMS (82.0%, k_app = 0.00714 min^-1) while maintaining excellent stability and reusability. Hence, this work provides a promising approach for the design of efficient photocatalysts to degrade persistent organic pollutants in soil and aqueous environments.

Application of CNN and ANN in assessment the effect of chemical components of biological nanomaterials in treatment of infection of inner ear and environmental sustainability

Nanoparticles (NPs) are a promising alternative to antibiotics for targeting microorganisms, especially in the case of difficult-to-treat bacterial illnesses. Antibacterial coatings for medical equipment, materials for infection prevention and healing, bacterial detection systems for medical diagnostics, and antibacterial immunizations are potential applications of nanotechnology. Infections in the ear, which can result in hearing loss, are extremely difficult to cure. The use of nanoparticles to enhance the efficacy of antimicrobial medicines is a potential option. Various types of inorganic, lipid-based, and polymeric nanoparticles have been produced and shown beneficial for the controlled administration of medication. This article focuses on the use of polymeric nanoparticles to treat frequent bacterial diseases in the human body. Using machine learning models such as artificial neural networks (ANNs) and convolutional neural networks (CNNs), this 28-day study evaluates the efficacy of nanoparticle therapy. An innovative application of advanced CNNs, such as Dense Net, for the automatic detection of middle ear infections is reported. Three thousand oto-endoscopic images (OEIs) were categorized as normal, chronic otitis media (COM), and otitis media with effusion (OME). Comparing middle ear effusions to OEIs, CNN models achieved a classification accuracy of 95%, indicating great promise for the automated identification of middle ear infections. The hybrid CNN-ANN model attained an overall accuracy of more than 0.90 percent, with a sensitivity of 95 percent and a specificity of 100 percent in distinguishing earwax from illness, and provided nearly perfect measures of 0.99 percent. Nanoparticles are a promising treatment for difficult-to-treat bacterial diseases, such as ear infections. The application of machine learning models, such as ANNs and CNNs, can improve the efficacy of nanoparticle therapy, especially for the automated detection of middle ear infections. Polymeric nanoparticles, in particular, have shown efficacy in treating common bacterial infections in children, indicating great promise for future treatments.

Construction of Z-Scheme Ag2MoO4/ZnWO4 Heterojunctions for Photocatalytically Removing Pollutants

Facilitation of the photocarrier separation is a crucial strategy for developing highly efficient photocatalysts in eliminating environmental pollutants. Herein we have developed a new kind of Ag2MoO4/ZnWO4 (AMO/ZWO) composite photocatalysts with a Z-scheme mechanism by anchoring AMO nanoparticles onto ZWO nanorods. Multiple characterization methodologies and density functional theory (DFT) calculations were employed to study the performances of the AMO/ZWO heterojunctions as well as the underlying photocatalytic mechanism. Simulated-sunlight-driven photodegradation experiments for removing methylene blue (MB) demonstrates that the 8%AMO/ZWO heterojunction can photocatalytically remove 99.8% of MB within 60 min, and the reaction rate constant is obtained as 0.10199 min-1, which is enhanced by 6.8 (or 4.9) times when compared with that of pure ZWO (or AMO). On the base of the experimental results and DFT calculations, the enhanced photocatalytic mechanism of the AMO/ZWO heterojunctions was revealed to be the efficient separation of photocarriers via a Z-scheme transfer process. In addition, photodegradion of various organic pollutants over 8%AMO/ZWO was further compared and aimed at incorporating it into industrial application in pollutant removal.