Lead-free bilayer heterometallic halide perovskite with reversible phase transition and photoluminescence properties

The Halogenation Effect Induces a Variety of Switchable Phase Transition and Second-Harmonic-Generation Materials

Halogen engineering offers a means of enhancing the physical properties of materials by fine-tuning the rotational energy barrier and dipole moment, which proved to be effective in achieving switchable phase transitions and optical responses in materials. In this work, by substituting the methyl group in ligand N-ethyl-1,5-diazabicyclo[3.3.0]octane (CH3CH2-3.3.0-Dabco) with halogen atoms X (Cl or Br) and then contining to react it with FeBr3 in a HBr aqueous solution, we successfully synthesized three kinds of organic-inorganic hybrid switchable phase-change materials, [CH3CH2-3.3.0-Dabco]FeBr4 (1), [ClCH2-3.3.0-Dabco]FeBr4 (2), and [BrCH2-3.3.0-Dabco]FeBr4 (3), which were fully characterized by single-crystal X-ray diffraction and variable-temperature powder X-ray diffraction. Compared to compound 1, compounds 2 and 3 show two pairs of reversible phase transitions, dielectric anomalies, and a second-harmonic-generation effect, which are successfully induced due to the halogen substitution. This study offers an effective molecular design strategy for the exploration and construction of iron halide organic-inorganic hybrid materials with temperature-adjustable physical properties.

Alkali Metal Organic-Inorganic Hybrid Compounds with Different Crystal Dimensions Show Phase-Transition, Dielectric, and SHG Properties Based on a Quasi-Spherical Amine (1S,4S)-2,5-Diazabicyclo[2.2.1]heptane

Reactions of a chiral and quasi-spherical molecule [1S,4S-2,5-2.2.1-H2dabch]I2 (1) with alkali metal halide MX (M = Na, K, Cs; X = Cl, Br) at room temperature produced a series of organic-inorganic hybrid (OIH) materials [1S,4S-2,5-2.2.1-H2dabch]NaBr3 (2), [1S,4S-2,5-2.2.1-H2dabch]CsCl3·H2O (3) and [1S,4S-2,5-2.2.1-H2dabch]KBr3·H2O (4). The single-crystal X-ray diffraction analysis revealed that the organic-inorganic framework structures comprised of the templating ligand and alkali metal halides (NaBr, CsCl, KBr) displayed dimensions spanning from one-dimensional (1D) to three-dimensional (3D). Moreover, the results of both differential scanning calorimetry (DSC) and dielectric measurements demonstrated that compounds 1-4 displayed reversible, high-temperature phase transitions and noticeable dielectric anomalies. In addition, the temperature-dependent second harmonic generation (SHG) results revealed crystals 1 and 3 can switch from the SHG-ON to the SHG-OFF state, which was proved by the variable-temperature X-ray diffraction. This research aims to streamline the exploration of multifunctional second harmonic generation (SHG) and dielectric materials that have been synthesized using chiral ligands and alkali metals. This will provide researchers with enhanced opportunities to delve further into this specific research domain.

Antimony Bromide Organic-Inorganic Hybrid Compound with a Long-Chain Diamine Showing Switchable Phase Transition and Second-Harmonic Generation Properties

Organic-inorganic hybrid metal halides have attracted significant attention in recent years due to their excellent optoelectronic properties and potential applications in solar cells. Herein, the organic-inorganic hybrid molecule [N,N-dimethyl-1,3-propanediamine]SbBr5 (1) was synthesized by reacting a long-chain organic diamine N,N-dimethyl-1,3-propanediamine with SbBr3 as a metal halide precursor in HBr aqueous solution. Compound 1 possesses a one-dimensional chainlike structure with the second-harmonic generation switch and two continuous phase transitions above room temperature. The band gap of compound 1 is about 2.62 eV, exhibiting a semiconductive property, which may have important implications for the development of new optoelectronic devices.

The halogen substitution strategy of inorganic skeletons triggers dielectric and band gap regulation of hybrid perovskites

Organic-inorganic hybrid perovskites (OIHPs) with dielectric switching functions have aroused comprehensive scientific interest, benefitting from their promising applications in sensors and information storage. However, to date, most of these materials discovered thus far possess a single function and are limited in their applicability, failing to meet the requirements of diverse applications. Moreover, the discovery of these materials has been largely serendipitous. Building multifunctional OIHPs with dielectric switching and semiconductors remains a daunting task. In this context, by introducing [C7H16N]+ as cations and in combination with lead halide with semiconducting properties, two OIHPs [C7H16N]PbI3 (1) and [C7H16N]PbBr3 (2) ([C7H16N]+ = (cyclopropylmethyl) trimethylammonium) have been successfully designed. They have dielectric switching properties close to 253 and 279 K and semiconducting behavior with band gaps of 2.67 and 3.22 eV. The phase transition temperature increased by 26 K through halogen substitution. In summary, our findings in this study provide insights into the application of the halogen substitution regulation strategy and open up new possibilities for designing perovskite semiconductors with dielectric switching functionality.

Targeted regulation and optimization of multifunctional phase transition materials by novel void occupancy engineering

As an innovative form of stimulus-response materials, organic-inorganic hybrid phase transition materials have become a wonderful contender in the field of functional electronic equipment due to their versatile structure, intensive functions and straightforward preparation. However, the targeted regulation and optimization of the electrical/optical response, along with the establishment of regular structure-performance relationships, pose significant challenges in meeting the diverse demands of practical applications over an extended period. Herein, we conducted a systematic investigation into the role of lattice void occupancy in regulating phase transition temperature (Tp) and related optical/electrical bistability. By taking hybrid material [TMEA][Cd(SCN)3] featuring a flexible ammonium cation [TMEA]+ (TMEA = ethyltrimethylammonium) as the prototype, we successfully synthesized three phase transition materials, namely [DEDMA][Cd(SCN)3], [TEMA][Cd(SCN)3] and [TEA][Cd(SCN)3] (DEDMA = diethyldimethylammonium, TEMA = triethylmethylammonium, and TEA = tetraethylammonium), and the excellent regulation of the physical properties of these compounds was achieved through subtle engineering of void occupancy. More strikingly, [TEA][Cd(SCN)3] exhibits remarkable bistable properties in terms of dielectric and nonlinear optical responses (with second-harmonic generation intensity reaching 2.5 times that of KDP). This work provides a feasible avenue to reasonably customise organic-inorganic hybrid phase transition materials and finely adjust their intriguing functionalities.

A chiral two-dimensional perovskite-like lead-free bismuth(III) iodide hybrid with high phase transition temperature

Bismuth(III) iodide perovskites have attracted great attention as lead-free hybrid semiconductors, but they mainly show zero- and one-dimensional structures. Herein, we report the first two-dimensional chiral perovskite-like bismuth(III) iodide hybrid [(S)-3-aminopyrrolidinium I]2Bi2/3I4 (1) with a high phase transition temperature of 408.8 K, higher than most of the reported chiral lead-free hybrid semiconductors.

A nickel(ii)-based one-dimensional organic-inorganic halide perovskite ferroelectric with the highest Curie temperature

Organic-inorganic halide perovskites (OIHPs) are very eye-catching due to their chemical tunability and rich physical properties such as ferroelectricity, magnetism, photovoltaic properties and photoluminescence. However, no nickel-based OIHP ferroelectrics have been reported so far. Here, we designed an ABX₃ OIHP ferroelectric (3-pyrrolinium)NiCl₃, where the 3-pyrrolinium cations are located on the voids surrounded by one-dimensional chains composed of NiCl₆-face-sharing octahedra via hydrogen bonding interactions. Such a unique structure enables the (3-pyrrolinium)NiCl₃ with a high spontaneous polarization (P _s) of 5.8 μC cm^-2 and a high Curie temperature (T _c) of 428 K, realizing dramatic enhancement of 112 and 52 K compared to its isostructural (3-pyrrolinium)MCl₃ (M = Cd, Mn). To our knowledge, remarkably, (3-pyrrolinium)NiCl₃ should be the first case of nickel(ii)-based OIHP ferroelectric to date, and its T _c of 428 K (35 K above that of BaTiO₃) is the highest among all reported one-dimensional OIHP ferroelectrics. This work offers a new structural building block for enriching the family of OIHP structures and will inspire the further exploration of new nickel(ii)-based OIHP ferroelectrics.

Halogen engineering of organic-inorganic hybrid perovskites displaying nonlinear optical, fluorescence properties and phase transition

In order to meet the needs of social development, increasing research attention has been paid to multifunctional molecular-based phase-transition materials. The traditional phase-transition materials with a single functional property can be transformed into magnificent ones by adding additional functional properties-for instance photoluminescence and magnetic order- because having two or more functional properties simultaneously greatly broadens the fields of their applications. At present, there are very few multifunctional phase-transition materials showing excellent performance, and the crystal structure design and performance optimization of materials still need to be studied in depth. Herein, we report the development of two organic-inorganic hybrid materials: (MBA)₂ZnI₄ (1, MBA = 4-methoxybenzylammonium) with switchable dielectricity and a high phase-transition temperature (T_c = 359.55 K), and (MBA)₂ZnBr₄ (2) with green luminescence (λ_exc = 314 nm) and nonlinear optical properties (0.75× KDP). A two-dimensional (2D) fingerprint analysis of the Hirshfeld surface plots revealed a significant difference between the hydrogen-bonding interaction before the phase transition and that afterwards. The two compounds were further verified, from energy band structure calculations, to be direct-band-gap semiconductors. In conclusion, this work has provided a viable strategy, involving the application of chemical modifications, for designing various functional materials.

Three-Dimensional Perovskite Phase Transition Materials with Switchable Second Harmonic Generation Properties Introduced by Homochiral (1S,4S)-2,5-Diazabicyclo[2.2.1]-heptane

Switchable second harmonic generation (SHG) materials have potential applications in information storage, signal processing, and so on because they can switch between SHG-on and SHG-off states. In this work, we designed and synthesized three organic-inorganic hybrid Rb halide three-dimensional (3D) perovskite materials [1S,4S 2,5-2.2.1-H₂dabch]RbX₃·0.5H₂O (X = Cl, 1; Br, 2; I, 3) based on the chiral 1S,4S-2,5-diazabicyclo[2.2.1]heptane (1S,4S-2,5-2.2.1-dabch). The selection of homochiral organic cations ensures that the compounds 1∼3 crystallize in the noncentrosymmetric and chiral space group P2₁2₁2₁, which further leads to reversible SHG responses of the three compounds. Through differential scanning calorimetry (DSC) and dielectric measurements, it revealed that the phase transition point of the compounds 1∼3 increased with RbCl, RbBr, and RbI. This is because the hydrogen interaction H···X between the inorganic framework [RbX₃]_n and the organic cation [1S,4S-2,5-2.2.1-H₂dabch]²⁺ is increased with the order of I > Br > Cl. This study can provide an effective molecular design strategy for the exploration and construction of temperature-tunable SHG switching materials.

Metal ion induced dual switchable dielectric and luminescent properties in hybrid halides

A new multi-functional organic-inorganic hybrid compound was successfully obtained by regulating metal halides. Apart from excellent luminescence properties, in particular, the introduction of a Mn halide successfully achieved a dual-switchable dielectric property, which could lead to very interesting exploration in sensors.

Competitive Dual-Emission-Induced Thermochromic Luminescence in Organic-Metal Halides

Lead-free Halides, especially Mn-based ones, are preferred as hotspots in the exploration of photoluminescent materials. However, there are few reports on sensitive reversible thermochromism and switchable dual emission originating from self-trapped exciton emission in pure Mn-Based materials. Here, we report a new Mn-based hybrid material [TMPA]₂MnI₄ (TMPA = trimethylphenylammonium), which shows two emission peaks at 545 and 660 nm benefitting from the d-d orbital transition of Mn²⁺ and the generation of self-trapped excitons, respectively. Due to the different sensitivity to temperature, the stages of thermal activation and thermal quenching of the two emission types are also inconsistent, showing a certain competition relationship and dominating the emission colors in different temperature ranges, resulting in adjustable green-orange-green thermochromic luminescence from 100 to 403 K (both high and low temperatures correspond to green, and orange is displayed at near room temperature). Therefore, thermochromic luminescence can be easily achieved by controlling the temperature under the guidance of excited states. This work provides new insights into the synthesis and application of thermochromic materials. Therefore, it is certain that regulating temperature while being guided by excited states will achieve thermochromic luminescence. This research offers fresh perspectives on the development and potential of thermochromic materials.

Thermal-driven unusual dual SHG switching with wide SHG-active step triggered by inverse symmetry breaking

Solid nonlinear optical (NLO) materials with switchable second-harmonic generation (SHG) on/off state show a strong potential application in photo-electronic devices. Sustained progress has been made through the persistent exploration of...

A Cd-based perovskite with optical-electrical multifunctional response

Two-dimensional (2D) organic-inorganic hybrid perovskites (OIHPs) have drawn tremendous attention on account of their structural tunability, simple synthesis mothed, superior properties. Among them, 2D cadmium-based perovskites, exhibiting reversible phase transition,...