The Raman effect and its application to electronic spectroscopies in metal-centered species: Techniques and investigations in ground and excited states

Brief descriptions of the principles of prominent methods used to study the penetration of materials into human hair and a review of examples of their use

Consumers are attracted to the latest fashion trends and different looks. This drives the search for novel hair treatments. Some chemicals present in hair treatment products can penetrate the hair shaft. These materials can either nourish or injure the hair cortex. Different techniques have been used to investigate the mechanism of molecule penetration and the conditions under which penetration occurs. This article reviews the techniques applied for this purpose. Various microscopy techniques are used to capture clear and colourful images to determine the diffusion pathways and the exact location of the molecules under study. However, the laborious sample preparation often leads to sample destruction since cross-sectioning is often required. While various other techniques have been successfully used for investigating the penetration methods, most of these require different amounts of work to be put in for sample preparation and instrumentation. Several spectroscopic techniques have been used to study the penetration of the molecules because of the high levels of accuracy and the quick response time of these techniques. Moreover, the samples are not damaged during the investigation.

Target-triggered configuration change of DNA tetrahedron for SERS assay of microRNA 122

A surface-enhanced Raman scattering (SERS) method is proposed for the assay of microRNA 122 based on configuration change of DNA tetrahedron. Firstly, a DNA tetrahedron was self-assembled with one vertex labeled with toluidine blue (TB). Then, it was immobilized on the porous Ni/SiO₂@PEI@Au as a SERS platform, which was characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). At this time, the DNA tetrahedron was contracted; so, the TB is close to AuNPs and the Raman signal is high. When target microRNA 122 existed, with the nicking enzyme amplification strategy, a great deal of DNA signal chains (S5) was obtained, which can extend the contracted DNA tetrahedron and change it into a three-dimensional DNA tetrahedron. In this case, the TB was far from AuNPs, resulting in a lower Raman signal. Due to the configuration change of DNA tetrahedron, the Raman signal at 1624 cm^-1 (with the excitation wavelength of 633 nm) has a linear relationship with the logarithm concentration of microRNA 122. This SERS assay has high sensitivity for microRNA 122 with a determination range from 0.01 aM to 10 fM and a detection limit of 0.009 aM. The recoveries from spiked samples were in the range 95 to 109%. This SERS strategy is designed based on the target-triggered configuration change of DNA tetrahedron, which can give new insight for DNA structures in bioanalysis. Graphical abstract A sensitive surface-enhanced Raman scattering (SERS) biosensor was developed to detect microRNA 122 using the configuration change of DNA tetrahedron to indirectly control the position of TB and hot spot.

Towards measuring reactivity on micro-to-millisecond timescales with laser pump, NMR probe spectroscopy

We present a quantitative analysis of the timescales of reactivity that are accessible to a laser pump, NMR probe spectroscopy method using para-hydrogen induced polarisation (PHIP) and identify three kinetic regimes: fast, intermediate and slow.

Combining Porous Magnetic Ni@C Nanospheres and CaCO3 Microcapsule as Surface-Enhanced Raman Spectroscopy Sensing Platform for Hypersensitive C-Reactive Protein Detection

In this work, we have designed an efficient and rapid surface-enhanced Raman spectroscopy (SERS) immunosensor for a supersensitive analysis of hypersensitive C-reactive protein (hs-CRP) with a label-free method by combining porous magnetic Ni@C nanospheres to aggregate together for simplifying the experiment operation and CaCO₃ microcapsule to encapsulate rhodamine B as the Raman signal. The final solution containing the signal molecule was dropped on the Ag nanoparticle substrate, and the signal could be enhanced by Ag particles. First, rhodamine B was encapsulated in the CaCO₃ microcapsule when it precipitated to form microcubes. Subsequently, the porous CaCO₃ microcapsule was assembled layer by layer with poly(ether imide) (PEI) and a second antibody to obtain rhodamine B@CaCO₃@PEI@Ab₂. Then, the functionalized magnetic Ni@C nanospheres were prepared to immobilize the primary antibody (Ab₁). Finally, the immunosensor was fabricated by the sandwiched antibody-antigen interactions. Compared to the DNA hydrogel, the low-cost CaCO₃ microcapsule would be rapidly dissolved by ethylene diamine tetraacetic acid, releasing rhodamine B to produce a strong Raman signal for a rapid and efficient detection of hs-CRP. With the hs-CRP concentration ranging from 0.1 pg mL^-1 to 1 μg mL^-1, the SERS intensity of the platform has a linear relationship with the logarithm of hs-CRP concentration, and the detection limit was 0.01 pg mL^-1. By this smart design, this work can give a direction for a rapid label-free SERS analysis.

Research Progress of Raman Spectroscopy in Drug Analysis

Raman spectroscopy is a spectroscopic analysis technique that enables rapid qualitative and quantitative detection based on inelastic collision and Raman scattering intensity. This review detailed the generation principle, instrument composition, influencing factors, and common classifications of Raman spectrum. Furthermore, it summarized and forecast the research progress of Raman spectroscopy in the field of drug analysis simultaneously over the past decade, including the identification of active pharmaceutical ingredients (APIs), qualitative and quantitative studies of pharmaceutical preparations, detection of illicit drugs, the identification of Chinese herbal medicines, and the combination with other technologies. The development of Raman spectroscopy in other fields is additionally summarized.

Coherent evolution of parahydrogen induced polarisation using laser pump, NMR probe spectroscopy: Theoretical framework and experimental observation

We recently reported a pump-probe method that uses a single laser pulse to introduce parahydrogen (p-H₂) into a metal dihydride complex and then follows the time-evolution of the p-H₂-derived nuclear spin states by NMR. We present here a theoretical framework to describe the oscillatory behaviour of the resultant hyperpolarised NMR signals using a product operator formalism. We consider the cases where the p-H₂-derived protons form part of an AX, AXY, AXYZ or AA'XX' spin system in the product molecule. We use this framework to predict the patterns for 2D pump-probe NMR spectra, where the indirect dimension represents the evolution during the pump-probe delay and the positions of the cross-peaks depend on the difference in chemical shift of the p-H₂-derived protons and the difference in their couplings to other nuclei. The evolution of the NMR signals of the p-H₂-derived protons, as well as the transfer of hyperpolarisation to other NMR-active nuclei in the product, is described. The theoretical framework is tested experimentally for a set of ruthenium dihydride complexes representing the different spin systems. Theoretical predictions and experimental results agree to within experimental error for all features of the hyperpolarised ¹H and ³¹P pump-probe NMR spectra. Thus we establish the laser pump, NMR probe approach as a robust way to directly observe and quantitatively analyse the coherent evolution of p-H₂-derived spin order over micro-to-millisecond timescales.

"Off" to "On" Surface-Enhanced Raman Spectroscopy Platform with Padlock Probe-Based Exponential Rolling Circle Amplification for Ultrasensitive Detection of MicroRNA 155

In this work, an "off" to "on" surface-enhanced Raman spectroscopy (SERS) platform was constructed for ultrasensitive detection of microRNA (miRNA) by using a magnetic SERS substrate (Co@C/PEI/Ag) and padlock probe-based exponential rolling circle amplification (P-ERCA) strategy. Herein, miRNA 155 could act as primers to initiate rolling circle amplification (RCA) for producing a long repeat sequence, and then the obtained DNA would be cleaved into two kinds of single-stranded DNAs in the presence of nickase. One of the DNAs can be a new primer to initiate new cycle reactions for obtaining large numbers of the other one (trigger DNA), consequently leading to an exponential amplification. On the other hand, the hairpin DNA (H1), with a Raman label (Cy5) at one end, would form a hairpin structure to make the Cy5 closer to the SERS substrates, which could produce a strong SERS signal ("on" status). Then placeholder DNA (P2) partly hybridized with H1 to open the hairpin structure making Cy5 far away from substrates with a decreased signal ("off" status). Next, the obtained trigger DNA can complement with P2 to make the Raman label reclosed to the SERS substrates with a strong SERS signal ("on" status). From this principle, the strategy could achieve the change from "off" to "on" status. This SERS strategy exhibited a wide linear range of 100 aM to 100 pM with a low detection limit of 70.2 aM, which indicated the proposed SERS platform has potential application value for ultrasensitive bioassay of miRNA.

Effect of Bridge Alteration on Ground- and Excited-State Properties of Ruthenium(II) Complexes with Electron-Donor-Substituted Dipyrido[3,2-a:2',3'-c]phenazine Ligands

A series of Ru(II) 2,2'-bipyridine (bpy) complexes with an electron-accepting dipyrido[3,2-a:2',3'-c]phenazine (dppz) ligand coupled to an electron-donating triarylamine (TAA) group have been investigated. Systematic alteration of a bridging unit between the dppz and TAA allowed exploration into how communication between the donor and acceptor is perturbed by distance, as well as by steric and electronic effects. The effect of the bridging group on the electronic properties of the systems was characterized using a variety of spectroscopic methods, including Fourier transform-Raman (FT-Raman) spectroscopy, resonance Raman spectroscopy, and transient resonance Raman (TR²) spectroscopy. These methods were used in conjunction with ground- and excited-state absorption spectroscopy, electrochemical studies, and DFT calculations. The ground-state electronic absorption spectra show distinct variation with the bridging group, with the wavelength observed for the lowest energy electronic transition ranging from 449 nm to 522 nm, accompanied by large changes in the molar absorptivity. The lowest-energy Franck-Condon state was determined to be intra-ligand charge transfer (ILCT) in nature for most compounds. The presence of higher-energy metal-to-ligand charge transfer (MLCT) Ru(II) → bpy and Ru(II) → dppz transitions was also confirmed via resonance Raman spectroscopy. The TR² spectra showed characteristic dppz^• - and TAA^• + vibrations, indicating that the THEXI state formed was also ILCT in nature. Excited-state lifetime measurements reveal that the rate of decay is in accordance with the energy gap law and is not otherwise affected by the nature of the bridging unit.

Mechanism of Charge Transfer from Plasmonic Nanostructures to Chemically Attached Materials

Plasmonic metal nanoparticles can efficiently convert the energy of visible photons into the energy of hot charge carriers within the nanoparticles. These energetic charge carriers can transfer to molecules or semiconductors, chemically attached to the nanoparticles, where they can induce photochemical transformations. Classical models of photoinduced charge excitation and transfer in metals suggest that the majority of the energetic charge carriers rapidly decay within the metal nanostructure before they are transferred into the neighboring molecule or semiconductor, and therefore, the efficiency of charge transfer is low. Herein, we present experimental evidence that calls into question this conventional picture. We demonstrate a system where the presence of a molecule, adsorbed on the surface of a plasmonic nanoparticle, significantly changes the flow of charge within the excited plasmonic system. The nanoparticle-adsorbate system experiences high rates of direct, resonant flow of charge from the nanoparticle to the molecule, bypassing the conventional charge excitation and thermalization process taking place in the nanoparticle. This picture of charge transfer suggests that the yield of extracted hot electrons (or holes) from plasmonic nanoparticles can be significantly higher than the yields expected based on conventional models. We discuss a conceptual physical framework that allows us to explain our experimental observations. This analysis points us in a direction toward molecular control of the charge transfer process using interface and local field engineering strategies.

Osmium(II) polypyridyl polyarginine conjugate as a probe for live cell imaging; a comparison of uptake, localization and cytotoxicity with its ruthenium(II) analogue

A first investigation into the application of a luminescent osmium(ii) bipyridine complex to live cell imaging is presented. Osmium(ii) (bis-2,2-bipyridyl)-2(4-carboxylphenyl) imidazo[4,5f][1,10]phenanthroline was prepared and conjugated to octaarginine, a cell penetrating peptide. The photophysics, cell uptake and cytotoxicity of this osmium complex conjugate were performed and compared with its ruthenium analogue. Cell uptake and distribution of both ruthenium and osmium conjugates were very similar with rapid transmembrane transport of the osmium probe (complete within approx. 20 min) and dispersion throughout the cytoplasm and organelles. The near-infrared (NIR) emission of the osmium complex (λmax 726 nm) coincides well with the biological optical window and this facilitated luminescent and luminescence lifetime imaging of the cell which was well resolved from cell autofluorescence. The large Stokes shift of the emission also permitted resonance Raman mapping of the dye within CHO cells. Rather surprisingly, the osmium conjugate exhibited very low cytotoxicity when incubated both in the dark and under visible irradiation. This was attributed to the remarkable stability of this complex which was reflected by the complete absence of photo-bleaching of the complex even under extended continuous irradiation. In addition, when compared to its ruthenium analogue its luminescence was short-lived in water therefore rendering it insensitive to O2.

Characterisation of the interactions between substrate, copper(ii) complex and DNA and their role in rate acceleration in DNA-based asymmetric catalysis

High effective molarity is responsible for the significant increase of binding of substrates to copper(ii) complexes in DNA-based catalysis.

The development of “fab-chips” as low-cost, sensitive surface-enhanced Raman spectroscopy (SERS) substrates for analytical applications

Modification of metal-coated zari fabric chips with silver nanoparticles results in sensitive, affordable SERS substrates which are useful for a wide range of chemical sensing applications.

Valence to core X-ray emission spectroscopy

This Progress Report discusses the chemical sensitivity of Kβ valence to core X-ray emission spectroscopy (vtc-XES) and its applications for investigating 3d-transition-metal based materials. Vtc-XES can be used for ligand identification and for the characterization of the valence electronic levels. The technique provides information that is similar to valence band photoemission spectroscopy but the sample environment can be chosen freely and thus allows measurements in presence of gases and liquids and it can be applied for measurements under in situ/operando or extreme conditions. The theoretical basis of the technique is presented using a one-electron approach and the vtc-XES spectral features are interpreted using ground state density functional theory calculations. Some recent results obtained by vtc-XES in various scientific fields are discussed to demonstrate the potential and future applications of this technique. Resonant X-ray emission spectroscopy is briefly introduced with some applications for the study of 3d and 5d-transition-metal based systems.

Time-resolved resonance Raman spectroscopy: exploring reactive intermediates

The study of reaction mechanisms involves systematic investigations of the correlation between structure, reactivity, and time. The challenge is to be able to observe the chemical changes undergone by reactants as they change into products via one or several intermediates such as electronic excited states (singlet and triplet), radicals, radical ions, carbocations, carbanions, carbenes, nitrenes, nitrinium ions, etc. The vast array of intermediates and timescales means there is no single "do-it-all" technique. The simultaneous advances in contemporary time-resolved Raman spectroscopic techniques and computational methods have done much towards visualizing molecular fingerprint snapshots of the reactive intermediates in the microsecond to femtosecond time domain. Raman spectroscopy and its sensitive counterpart resonance Raman spectroscopy have been well proven as means for determining molecular structure, chemical bonding, reactivity, and dynamics of short-lived intermediates in solution phase and are advantageous in comparison to commonly used time-resolved absorption and emission spectroscopy. Today time-resolved Raman spectroscopy is a mature technique; its development owes much to the advent of pulsed tunable lasers, highly efficient spectrometers, and high speed, highly sensitive multichannel detectors able to collect a complete spectrum. This review article will provide a brief chronological development of the experimental setup and demonstrate how experimentalists have conquered numerous challenges to obtain background-free (removing fluorescence), intense, and highly spectrally resolved Raman spectra in the nanosecond to microsecond (ns-μs) and picosecond (ps) time domains and, perhaps surprisingly, laid the foundations for new techniques such as spatially offset Raman spectroscopy.

Resonance Raman measurements of carotenoids using light-emitting diodes

We report on the development of a compact commercial instrument for measuring carotenoids in skin tissue. The instrument uses two light-emitting diodes (LEDs) for dual-wavelength excitation and four photomultiplier tubes for multichannel detection. Bandpass filters are used to select the excitation detection wavelengths. The f1.3 optical system has high optical throughput and single photon sensitivity, both of which are crucial in LED-based Raman measurements. We employ a signal processing technique that compensates for detector drift and error. The sensitivity and reproducibility of the LED Raman instrument compares favorably to laser-based Raman spectrometers. This compact, portable instrument is used for noninvasive measurement of carotenoid molecules in human skin with a repeatability better than 10%.

Surface-enhanced Raman spectroscopy for in situ measurements of signaling molecules (autoinducers) relevant to bacteria quorum sensing

Autoinducer (AI) molecules are used by quorum sensing (QS) bacteria to communicate information about their environment and are critical to their ability to coordinate certain physiological activities. Studying how these organisms react to environmental stresses could provide insight into methods to control these activities. To this end, we are investigating spectroscopic methods of analysis that allow in situ measurements of these AI molecules under different environmental conditions. We found that for one class of AIs, N-acyl-homoserine lactones (AHLs), surface-enhanced Raman spectroscopy (SERS) is a method capable of performing such measurements in situ. SERS spectra of seven different AHLs with acyl chain lengths from 4 to 12 carbons were collected for the first time using Ag colloidal nanoparticles synthesized via both citrate and borohydride reduction methods. Strong SERS spectra were obtained in as little as 10 seconds for 80 microM solutions of AI that exhibited the strongest SERS response, whereas 20 seconds was typical for most AI SERS spectra collected during this study. Although all spectra were similar, significant differences were detected in the SERS spectra of C4-AHL and 3-oxo-C6-AHL and more subtle differences were noted between all AHLs. Initial results indicate a detection limit of approximately 10(-6)M for C6-AHL, which is within the limits of biologically relevant concentrations of AI molecules (nM-microM). Based on these results, the SERS method shows promise for monitoring AI molecule concentrations in situ, within biofilms containing QS bacteria. This new capability offers the possibility to "listen in" on chemical communications between bacteria in their natural environment as that environment is stressed.