Olefin oligomerization, homopolymerization and copolymerization by late transition metals supported by (imino)pyridine ligands

Polar Molecules Regulating the Regio- and Stereoselectivity of Polymerization of Conjugated Dienes Catalyzed by CGC-Type Rare-Earth Metal Catalysts

Herein, a concise, effective, and scalable strategy is reported that the introduction of polar molecules (PMs) (e.g., anisole (PhOMe), phenetole (PhOEt), 2-methoxynaphthalene (NaphOMe), thioanisole (PhSMe), and N,N-dimethylaniline (PhNMe2)) as continuously coordinated neutral ligand of cationic active species in situ generated from the constrain-geometry-configuration-type rare-earth metal complexes A-F/AliBu3/[Ph3C][B(C6F5)4] ternary systems can easily switch the regio- and stereoselectivity of the polymerization of conjugated dienes (CDs, including 2-subsituted CDs such as isoprene (IP) and myrcene (MY), 1,2-disubstituted CD ocimene (OC), and 1-substituted polar CD 1-(para-methoxyphenyl)-1,3-butadiene (p-MOPB)) from poor selectivities to high selectivities (for IP and MY: 3,4-selectivity up to 99%; for OC: trans-1,2-selectivity up to 93% (mm up to 90%); for p-MOPB: 3,4-syndioselectivity (3,4- up to 99%, rrrr up to 96%)). DFT calculations explain the continuous coordination roles of PMs on the regulation of the regio- and stereoselectivity of the polymerization of CDs. In comparison with the traditional strategies, this strategy by adding some common PMs is easier and more convenient, decreasing the synthetic cost and complex operation of new metal catalyst and cocatalyst. Such regio- and stereoselective regulation method by using PMs is not reported for the coordination polymerization of olefins catalyzed by rare-earth metal and early transition metal complexes.

2-(Arylimino)benzylidene-8-arylimino-5,6,7-trihydroquinoline Cobalt(II) Dichloride Polymerization Catalysts for Polyethylenes with Narrow Polydispersity

A series of 2-(arylimino)benzylidene-8-arylimino-5,6,7-trihydroquinoline cobalt(II) chlorides (Co1–Co6) containing a fused ring and a more inert phenyl group as the substituent at the imino-C atom has been synthesized using a one-pot synthesis method and fully characterized by FT-IR and elemental analysis. The molecular structures of Co2 and Co5 have been confirmed by X-ray diffraction as having a distorted square pyramidal geometry around a cobalt core with a tridentate N,N,N-chelating ligand and two chlorides. On activation with either methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), Co1–Co6 exhibited high activities for ethylene polymerization. The least sterically hindered Co2 showed a maximum activity of 16.51 × 106 g (PE) mol−1 (Co) h−1 at a moderate temperature 50 °C. Additionally, ortho-fluoride Co6 was able to maintain a high activity not only at 70 °C but also after 60 min at 50 °C, highlighting its excellent thermal-stability and long catalytic lifetime. The resultant polyethylene showed clearly narrower molecular weight distribution (PDI: 1.3–3.1) than those produced by structurally related cobalt counterparts, indicating the positive influence of benzhydryl substitution on the catalysis. Moreover, the molecular weight (1.7–386.6 kg mol−1) of vinyl- or n-propyl-terminated polyethylene can be finely regulated by controlling polymerization parameters.

Late Transition Metal Catalysts with Chelating Amines for Olefin Polymerization

Polyolefins are the most consumed polymeric materials extensively used in our daily life and are usually generated by coordination polymerization in the polyolefin industry. Olefin polymerization catalysts containing transition metal–organic compound combinations are undoubtedly crucial for the development of the polyolefin industry. The nitrogen donor atom has attracted considerable interest and is widely used in combination with the transition metal for the fine-tuning of the chemical environment around the metal center. In addition to widely reported olefin polymerization catalysts with imine and amide donors (sp2 hybrid N), late transition metal catalysts with chelating amine donors (sp3 hybrid N) for olefin polymerization have never been reviewed. In this review paper, we focus on late transition metal (Ni, Pd, Fe, and Co) catalysts with chelating amines for olefin polymerization. A variety of late transition metal catalysts bearing different neutral amine donors are surveyed for olefin polymerization, including amine–imine, amine–pyridine, α-diamine, and [N, N, N] tridentate ligands with amine donors. The relationship between catalyst structure and catalytic performance is also encompassed. This review aims to promote the design of late transition metal catalysts with unique chelating amine donors for the development of high-performance polyolefin materials.

High molecular weight PE elastomers through 4,4-difluorobenzhydryl substitution in symmetrical α-diimino-nickel ethylene polymerization catalysts

The following family of N,N-diaryl-2,3-dimethyl-1,4-diazabutadienes, ArN[double bond, length as m-dash]C(Me)C(Me)[double bond, length as m-dash]NAr (Ar = 2,6-Me2-4-{CH(4-FC6H4)2}C6H2L1, 2-Me-6-Et-4-{CH(4-FC6H4)2}C6H2L2, 2,4-{CH(4-FC6H4)2}2-6-MeC6H2L3, 2,4-{CH(4-FC6H4)2}2-6-EtC6H2L4, 2,4-{CH(4-FC6H4)2}2-6-iPrC6H2L5), each incorporating para-substituted 4,4-difluorobenzhydryl groups but differing in the ortho-pairing, have been synthesized and used as precursors to their respective nickel(ii) bromide complexes, Ni1-Ni5. Compound characterization has been achieved through a combination of FT-IR, multinuclear NMR spectroscopy (1H, 13C, 19F) and elemental analysis. In addition, L1, Ni1 and Ni5 have been structurally characterized with Ni1 and Ni5 revealing similarly distorted tetrahedral geometries about nickel but with distinct differences in the steric protection offered by the ortho-substituents. All nickel complexes, under suitable activation, showed high activity for ethylene polymerization with a predilection towards forming branched high molecular weight polyethylene with narrow dispersity. Notably the most sterically bulky Ni5, under activation with either EtAlCl2, Et2AlCl or EASC, was exceptionally active (0.9-1.0 × 107 g of PE per (mol of Ni) per h) at an operating temperature of 40 °C. Furthermore, the polyethylene generated displayed molecular weights close to one million g mol-1 (M w range: 829-922 kg mol-1) with high branching densities (86-102/1000 carbons) and a selectivity for short chain branches (% Me = 94.3% (EtAlCl2), 87.2% (Et2AlCl), 87.7% (EASC)). Further analysis of the mechanical properties of the polymers produced at 40 °C and 50 °C using Ni5 highlighted the key role played by crystallinity (X c) and molecular weight (M w) on tensile strength (σ b) and elongation at break (ε b). In addition, stress-strain recovery tests reveal these high molecular weight polymers to exhibit characteristics of thermoplastic elastomers (TPEs).

Ethylene (co) oligomerization using iminopyridyl Ni(II) and Pd(II) complexes bearing benzocycloalkyl moieties to access hyperbranched ethylene oligomers and ethylene-MA co-oligomers

Hyperbranched ethylene oligomers and polar functionalized co-oligomers synthesized via ethylene chain walking (co) oligomerization is a very attractive strategy. In this study, a series of dibenzhydryl iminopyridyl ligands with benzocycloalkyl and naphthyl moieties and the corresponding Ni(II) and Pd(II) complexes were synthesized and characterized. The Ni(II) complexes were highly effective in ethylene oligomerization and ethylene oligomers with hyperbranched microstructures were generated from this system. The corresponding Pd(II) complexes showed moderate oligomerization activities in ethylene oligomerization and hyperbranched ethylene oligomers were also yielded from the system. More significantly, the Pd(II) complexes can also effectively promote the co-oligomerization of ethylene with methyl acrylate (MA) to obtain hyperbranched polar functionalized ethylene-MA co-oligomers. The reaction temperature, catalyst ligand structure and metal type all have significant effects on ethylene (co) oligomerization with respect to catalytic activity, molecular weight and topology of the oligomers.

4,4'-Dimethoxybenzhydryl substituent augments performance of bis(imino)pyridine cobalt-based catalysts in ethylene polymerization

A series of cobalt complexes with bis(imino)pyridine derivatives featuring unsymmetrical substitution with bulky groups has been synthesized and characterized. The molecular structures of two representatives have been determined by the single-crystal X-ray diffraction study, revealing distorted tetrahedral geometry with different degrees of steric hindrance imparted by the two inequivalent aryl groups attached to the imine nitrogen atoms. On activation with either MAO or MMAO, these complexes display high activity toward ethylene polymerization, reaching 8.71 × 10⁶ g of PE (mol of Co)⁻¹ h⁻¹ at 60 °C and produce polyethylene of high molecular weight (M_w = 5.27 × 10⁵ g mol⁻¹) and low dispersity. The presence of the methoxy-substituent noticeably enhances the activity of the cobalt catalyst and increases the molecular weight of the resultant polyethylene.

Employing ligands with 4,4′-dimethoxybenzhydryl groups, the cobalt precatalysts display high activities toward ethylene polymerization and produce highly linear polyethylenes, the high density polyethylene (HDPE).

Synthesis of High-Molecular-Weight Branched Polyethylene Using a Hybrid "Sandwich" Pyridine-Imine Ni(II) Catalyst

Most pyridine-imine Ni(II) and Pd(II) catalysts tend to yield low-molecular-weight polyethylene and ethylene-based copolymers in olefin insertion polymerization, as the unilateral axial steric structure of such complexes often cannot provide effective shielding of the metal center. In this study, we synthesized a series of hybrid "semi-sandwich" and "sandwich" type pyridine-imine Ni(II) complexes by incorporating diarylmethyl or dibenzosuberyl groups onto 8-aryl-naphthyl motif. The as-prepared Ni(II) complexes afforded highly branched polyethylene with high molecular weights (level of 105 g/mol), and moderate activities (level of 105 g/(molh)) in ethylene polymerization. Most interestingly, compared to "semi-sandwich" Ni(II) complexes bearing (2-diarylmethyl-8-aryl)naphthyl units, the "full-sandwich" counterpart containing (2-dibenzosuberyl-8-aryl)naphthyl motif was able to produce higher-molecular-weight polyethylene with higher branching density. In addition, the effect of remote non-conjugated electronic substituents in diarylmethyl groups of the Ni(II) system was also observed in ethylene polymerization.

Trifluoromethoxy-substituted nickel catalysts for producing highly branched polyethylenes: impact of solvent, activator and N,N′-ligand on polymer properties

Highly branched and narrowly dispersed polyethylenes with high or ultra-high molecular weights are accessible using the depicted nickel precatalyst/activator combinations.

Single-site, Ni-modified Wells–Dawson-type polyoxometalate for propylene dimerization

Propylene dimerization to linear products on isolated Ni2+ sites of modified Wells–Dawson-type polyoxometalates.

Efficient suppression of the chain transfer reaction in ethylene coordination polymerization with dibenzosuberyl substituents

Catalysts with dibenzosuberyl substituents possess a superior ability to suppress chain transfer in ethylene (co)polymerization, producing high molecular weight polyethylenes and functionalized polyethylenes (ethylene-MA copolymers).

Recent progress in rare-earth metal-catalyzed sp2 and sp3 C–H functionalization to construct C–C and C–heteroelement bonds

The review presents rare-earth metal-catalyzed C(sp2/sp3)–H functionalization accessing C–C/C–heteroatom bonds and olefin (co)polymerization, highlighting substrate scope, mechanistic realization, and origin of site-, enantio-/diastereo-selectivity.

A rigid-flexible double-layer steric strategy for ethylene (co)oligomerization with pyridine-imine Ni(ii) and Pd(ii) complexes

A rigid-flexible double-layer steric strategy enhances the molecular weight of the resulting ethylene oligomers and promotes the co-oligomerization of ethylene and methyl acrylate.

Fluorinated 2,6-Bis(arylimino)pyridyliron Complexes Targeting Bimodal Dispersive Polyethylene; probing chain termination pathway via a combined experimental and DFT study

The fluorinated 2,6-bis(arylimino)pyridyl iron (II) complexes, [2-[CMeN{2,4-{(4-FC6H4)2CH}2-6-F}]-6-(CMeNAr)C5H3N]FeCl2 (Ar = 2,6-Me2C6H3 Fe1, 2,6-Et2C6H3 Fe2, 2,6-iPr2C6H3 Fe3, 2,4,6-Me3C6H2 Fe4, and 2,6-Et2-4-MeC6H2 Fe5) and [2-[CMeN{2-{(4-FC6H4)2CH}-4-{(C6H5)CHAr’}-6-F}]-6-(CMeN(2,6-iPr2C6H3))C5H3N] FeCl2 (Ar’ = 3-(4-FC6H4)2CH}2-4-NH2-5-FC6H2 Fe6), being verified with...

Facile Synthesis of Hyperbranched Ethylene Oligomers and Ethylene/Methyl Acrylate Co-oligomers with Different Microscopic Chain Architectures

Low-molecular-weight (MW) ethylene oligomers with hyperbranched microstructures are often difficult to be synthesized by traditional catalytic processes. In this study, a series of N-terphenyl iminopyridyl ligands and the corresponding Pd(II) and Ni(II) complexes bearing remote conjugated substituents with different electronic effects (H, Me, F, Cl, and tBu) were synthesized in a simple and efficient way. These Pd(II) and Ni(II) complexes were highly effective in the ethylene oligomerization and co-oligomerization with methyl acrylate (MA). Low-MW ethylene oligomers with hyperbranched microstructures were generated using the iminopyridyl Pd(II) and Ni(II) complexes in ethylene oligomerization. More importantly, polar functionalized ethylene-MA co-oligomers with low MWs and varying incorporation ratios were generated via ethylene and MA co-oligomerization using the Pd(II) complexes. Most notably, these ethylene oligomers obtained by different metal species showed a significant difference in microscopic chain architectures. The remote conjugated electron effect showed little effect on the polymerization parameters of the iminopyridyl system, which is very different from those of the salicylaldiminato system.

Fluorinated Sterically Bulky Mononuclear and Binuclear 2-Iminopyridylnickel Halides for Ethylene Polymerization: Effects of Ligand Frameworks and Remote Substituents

In the present work, four new mono(imino)pyridine ligands, 2-((2,4-bis(bis(4-R-phenyl)methyl)-6-fluorophenylimino)methyl)pyridine (R = H, L1; R = OCH3, L2; R = F, L3) and 2-((2-(bis(4-fluorophenyl)methyl)-4-((3-(bis(4-fluorophenyl)methyl)-4-amine-5-fluoro-phenyl)(phenyl)methyl)-6-fluorophenylimino)methyl)pyridine (L4), have been designed in good yields. Additionally, three novel benzhydryl-bridged bis(imino)pyridine ligands, 2-(2-(bis(4-R-phenyl)methyl)-6-fluoro-phenylimino)pyridine (R = H, L5; R = OCH3, L6; R = F, L7), were also prepared for comparison. All these organic compounds have been characterized by FT-IR analysis, 1H/13C NMR spectroscopy, and elemental analysis. The treatment of L1-L7 with nickel halides afforded the corresponding monometallic (Ni1-Ni4) and bimetallic (Ni5-Ni7) nickel complexes in moderate to good overall yields. Upon activation with methylaluminoxane (MAO), Ni4 Cl showed the highest activity up to 8.3 × 106 g of polyethylene (PE) (mol of Ni)-1 h-1 among Ni1-Ni7 for ethylene polymerization. In all cases, unsaturated PEs with low molecular weights (0.7-13.3 kg mol-1) were produced effectively. The introduction of remote para-substituents into the benzhydryl groups showed a beneficial effect on catalytic activity with the overall activities following the order of Ni-F > Ni-OCH3 > Ni-H. In addition, these para-substituents were also found to affect not only the catalytic performance of catalysts but also the branching content of the PE product. Generally, the resultant PE waxes were moderately branched and contained both terminal vinyls (-CH=CH2) and internal vinylenes (-CH=CH-) while with different ratios of vinyls to vinylenes. Notably, the polymers produced using para-methoxy-substituted Ni2/MAO and Ni6/MAO possessed the least branching content and uniquely high vinyl contributions.

Catalytic Performance of Cycloalkyl-Fused Aryliminopyridyl Nickel Complexes toward Ethylene Polymerization by QSPR Modeling

Quantitative structure–property relationship (QSPR) modeling is performed to investigate the role of cycloalkyl-fused rings on the catalytic performance of 46 aryliminopyridyl nickel precatalysts. The catalytic activities for nickel complexes in ethylene polymerization are well-predicted by the obtained 2D-QSPR model, exploring the main contribution from the charge distribution of negatively charged atoms. Comparatively, 3D-QSPR models show better predictive and validation capabilities than that of 2D-QSPR for both catalytic activity (Act.) and the molecular weight of the product (Mw). Three-dimensional contour maps illustrate the predominant effect of a steric field on both catalytic properties; smaller sizes of cycloalkyl-fused rings are favorable to Act.y, whereas they are unfavorable to Mw. This study may provide assistance in the design of a new nickel complex with high catalytic performance.

Designed pincer ligand supported Co(II)-based catalysts for dehydrogenative activation of alcohols: Studies on N-alkylation of amines, α-alkylation of ketones and synthesis of quinolines

Base-metal catalysts Co1, Co2 and Co3 were synthesized from designed pincer ligands L1, L2 and L3 having NNN donor atoms respectively. Co1, Co2 and Co3 were characterized by IR, UV-Vis. and ESI-MS spectroscopic studies. Single crystal X-ray diffraction studies were investigated to authenticate the molecular structures of Co1 and Co3. Catalysts Co1, Co2 and Co3 were utilized to study the dehydrogenative activation of alcohols for N-alkylation of amines, α-alkylation of ketones and synthesis of quinolines. Under optimized reaction conditions, a broad range of substrates including alcohols, anilines and ketones were exploited. A series of control experiments for N-alkylation of amines, α-alkylation of ketones and synthesis of quinolines were examined to understand the reaction pathway. ESI-MS spectral studies were investigated to characterize cobalt-alkoxide and cobalt-hydride intermediates. Reduction of styrene by evolved hydrogen gas during the reaction was investigated to authenticate the dehydrogenative nature of the catalysts. Probable reaction pathways were proposed for N-alkylation of amines, α-alkylation of ketones and synthesis of quinolines on the basis of control experiments and detection of reaction intermediates.

Synthesis of a Ni Complex Chelated by a [2.2]Paracyclophane-Functionalized Diimine Ligand and Its Catalytic Activity for Olefin Oligomerization

A diimine ligand having two [2.2]paracyclophanyl substituents at the N atoms (L1) was prepared from the reaction of amino[2.2]paracyclophane with acenaphtenequinone. The ligand reacts with NiBr₂(dme) (dme: 1,2-dimethoxyethane) to form the dibromonickel complex with (R,R) and (S,S) configuration, NiBr₂(L1). The structure of the complex was confirmed by X-ray crystallography. NiBr₂(L1) catalyzes oligomerization of ethylene in the presence of methylaluminoxane (MAO) co-catalyst at 10–50 °C to form a mixture of 1- and 2-butenes after 3 h. The reactions for 6 h and 8 h at 25 °C causes further increase of 2-butene formed via isomerization of 1-butene and formation of hexenes. Reaction of 1-hexene catalyzed by NiBr₂(L1)–MAO produces 2-hexene via isomerization and C12 and C18 hydrocarbons via oligomerization. Consumption of 1-hexene of the reaction obeys first-order kinetics. The kinetic parameters were obtained to be ΔG^‡ = 93.6 kJ mol⁻¹, ΔH^‡ = 63.0 kJ mol⁻¹, and ΔS^‡ = −112 J mol⁻¹deg⁻¹. NiBr₂(L1) catalyzes co-dimerization of ethylene and 1-hexene to form C8 hydrocarbons with higher rate and selectivity than the tetramerization of ethylene.

Highly Active Heterogeneous Catalyst for Ethylene Dimerization Prepared by Selectively Doping Ni on the Surface of a Zeolitic Imidazolate Framework

The production of 1-butene by ethylene dimerization is an important chemical industrial process currently implemented using homogeneous catalysts. Here, we describe a highly active heterogeneous catalyst (Ni-ZIF-8) for ethylene dimerization, which consists of isolating Ni-active sites selectively located on the crystal surface of a zeolitic imidazolate framework. Ni-ZIF-8 can be easily prepared by a simple one-pot synthesis method in which site-specific anchoring of Ni is achieved spontaneously because of the incompatibility between the d⁸ electronic configuration of Ni²⁺ and the three-dimensional framework of ZIF-8. The full exposure and square-planar coordination of the Ni sites accounts for the high catalytic activity of Ni-ZIF-8. It exhibits an average ethylene turnover frequency greater than 1 000 000 h^-1 (1-butene selectivity >85%) at 35 °C and 50 bar, far exceeding the activities of previously reported heterogeneous catalysts and many homogeneous catalysts under similar conditions. Moreover, compared to molecular Ni complexes used as homogeneous catalysts for ethylene dimerization, Ni-ZIF-8 has significantly higher stability and shows constant activity during 4 h of continuous reaction. Isotopic labeling experiments indicate that ethylene dimerization over Ni-ZIF-8 follows the Cossee-Arlman mechanism, and detailed characterizations combined with density functional theory calculations rationalize this observed high activity.

Investigations on the Ethylene Polymerization with Bisarylimine Pyridine Iron (BIP) Catalysts

The kinetics and terminations of ethylene polymerization, mediated by five bisarylimine pyridine (BIP) iron dichloride precatalysts, and activated by large amounts of methyl aluminoxane (MAO) was studied. Narrow distributed paraffins from initially formed aluminum polymeryls and broader distributed 1-polyolefins and (bimodal) mixtures, thereof, were obtained after acidic workup. The main pathway of olefin formation is beta-hydrogen transfer to ethylene. The rate of polymerization in the initial phase is inversely proportional to the co-catalyst concentration for all pre-catalysts; a first-order dependence was found on ethylene and catalyst concentrations. The inhibition by aluminum alkyls is released to some extent in a second phase, which arises after the original methyl groups are transformed into n-alkyl entities and the aluminum polymeryls partly precipitate in the toluene medium. The catalysis is interpretable in a mechanism, wherein, the relative rate of chain shuttling, beta-hydrogen transfer and insertion of ethylene are determining the outcome. Beta-hydrogen transfer enables catalyst mobility, which leads to a (degenerate) chain growth of already precipitated aluminum alkyls. Stronger Lewis acidic centers of the single site catalysts, and those with smaller ligands, are more prone to yield 1-olefins and to undergo a faster reversible alkyl exchange between aluminum and iron.

Precisely regulating the acidity of mesoporous silica on the catalytic performance of 1-decene oligomerization

Optimization of the acidity of Al-MCM-41 catalysts to improve the catalytic performance of 1-decene oligomerization.