Efficient deoxygenation methodologies catalyzed by oxo-molybdenum and oxo-rhenium complexes

A Metallomicellar Catalyst for Controlled Oxidation of Alcohols and Lignin Mimics in Water using Open Air as Oxidant

Alcohol groups and β-O-4 (C-C) linkages are widespread in biomass feedstock that are abundant renewable resource for value-added chemicals. The development of sustainable protocols for direct oxidation or oxidative cleavage of feedstock materials in a controlled fashion, using open air as an oxidant is an intellectually stimulating task to produce industrially important value-added carbonyls. Further, the oxidative depolymerization of lignin into fine chemicals has evoked interest in recent times. Herein, we report the first example of a catalyst system that could activate molecular oxygen from atmospheric air for controlled oxidation and oxidative cleavage/depolymerization of feedstock materials such as alcohols, β-O-4 (C-C) linkages and real lignin in water under open air conditions. The selectivity of carbonyl products is controlled by altering the pH between ~7.0 and ~12.0. The current strategy highlights the non-involvement of any external co-catalyst, oxidant, radical additives, and/or destructive organic solvents. The catalyst shows a wide substrate scope and eminent functional group tolerance. The upscaled multigram synthesis using an inexpensive catalyst and easily available oxidant evidences the practical utility of the developed protocol. A plausible mechanism has been proposed with the help of a few controlled experiments, and kinetic and computational studies.

Enhancement of Diarylamine Antioxidant Activity by Molybdenum Dithiocarbamates

Molybdenum dithiocarbamates (MDTCs) are indispensable lubricant additives. Although their role as antiwear agents is well established, they have also been attributed antioxidant properties that are not understood. MDTCs do not inhibit autoxidation, but they markedly enhance the capacity of diphenylamines (DPAs)─ubiquitous radical-trapping antioxidants (RTAs)─to do so. We find this synergy to be evident not only at elevated temperatures (160 °C in n-hexadecane) but also at moderate temperatures, where autoxidations can be continuously monitored and kinetics more easily interpreted (100 °C in squalane). Interestingly, the synergy disappeared in an unsaturated hydrocarbon (n-hexadec-1-ene), where the RTA activity of the DPA is known to result from the diarylnitroxide derived therefrom. Autoxidations of squalane carried out in the presence of the diarylnitroxide─wherein it is a poor inhibitor─were much better inhibited in the presence of MDTC, suggesting that it converts the nitroxide to (a) more competent RTA(s). Indeed, preparative experiments revealed two species: DPA and a DPA dimer into which a single oxygen atom had been incorporated. This conversion is accelerated by the oxidation of MDTC to a dioxo molybdenum species. A mechanism is proposed to account for these observations, and the implications of our findings and their interpretation are discussed.

Molybdenum-Quinone-Catalyzed Deoxygenative Coupling of Aromatic Carbonyl Compounds

In the presence of triphenylphosphine as a mild reductant, the use of catalytic amounts of Mo(CO)₆ and an ortho-quinone ligand enables the intermolecular reductive coupling of aromatic aldehydes and the intramolecular coupling of aromatic ketones to produce functionalized alkenes. Diaryl- and diheteroaryl alkenes are synthesized with high (E)-selectivity and a tolerance toward bromide, iodide, and steric hindrance. Intramolecular coupling of dicarbonyl compounds under similar conditions affords mono- and disubstituted phenanthrenes.

Inspired by Nature-Functional Analogues of Molybdenum and Tungsten-Dependent Oxidoreductases

Throughout the previous ten years many scientists took inspiration from natural molybdenum and tungsten-dependent oxidoreductases to build functional active site analogues. These studies not only led to an ever more detailed mechanistic understanding of the biological template, but also paved the way to atypical selectivity and activity, such as catalytic hydrogen evolution. This review is aimed at representing the last decade’s progress in the research of and with molybdenum and tungsten functional model compounds. The portrayed systems, organized according to their ability to facilitate typical and artificial enzyme reactions, comprise complexes with non-innocent dithiolene ligands, resembling molybdopterin, as well as entirely non-natural nitrogen, oxygen, and/or sulfur bearing chelating donor ligands. All model compounds receive individual attention, highlighting the specific novelty that each provides for our understanding of the enzymatic mechanisms, such as oxygen atom transfer and proton-coupled electron transfer, or that each presents for exploiting new and useful catalytic capability. Overall, a shift in the application of these model compounds towards uncommon reactions is noted, the latter are comprehensively discussed.

Rhenium-catalysed reactions in chemical synthesis: selected case studies

This Perspective presents and discusses a selection of examples that reinforce the enabling and distinctive reactivity provided by homogeneous rhenium catalysis in chemical synthesis. Specifically, the ability for lower oxidation...

Transition metal-catalyzed deoxydehydration: missing pieces of the puzzle

Deoxydehydration (DODH) is a transformation that converts a vicinal diol into an olefin with the help of a sacrificial reductant.

Deoxygenation reactions in organic synthesis catalyzed by dioxomolybdenum(VI) complexes

Dioxomolybdenum(VI) complexes have been applied as efficient, inexpensive and benign catalysts to deoxygenation reactions of a diverse number of compounds in the last two decades. Dioxomolybdenum complexes have demonstrated wide applicability to the deoxygenation of sulfoxides into sulfides and reduction of N-O bonds. Even the challenging nitro functional group was efficiently deoxygenated, affording amines or diverse heterocycles after reductive cyclization reactions. More recently, carbon-based substrates like epoxides, alcohols and ketones have been successfully deoxygenated. Also, dioxomolybdenum complexes accomplished deoxydehydration (DODH) reactions of biomass-derived vicinal 1,2-diols, affording valuable alkenes. The choice of the catalytic systems and reductant is decisive to achieve the desired transformation. Commonly found reducing agents involved phosphorous-based compounds, silanes, molecular hydrogen, or even glycols and other alcohols.

Reductively disilylated N-heterocycles as versatile organosilicon reagents

The reductively disilylated N-heterocyclic systems 1,4-bis(trimethylsilyl)-1-aza-2,5-cyclohexadiene (1Si), 1,4-bis(trimethylsilyl)-1,4-dihydropyrazine (2Si) and its methyl derivatives (3Si and 4Si), and 1,1'-bis(trimethylsilyl)-4,4'-bipyridinylidene (5Si) are proficient organosilicon reagents owing to their low first vertical ionization potentials and the heterophilicity of the polarized N-Si bonds. These have prompted their reactivity as two-electron reductants or reductive silylations. These reactions benefit from the concomitant rearomatization of the N-heterocycles and liberation of trimethylsilyl halides or (Me₃Si)₂O, which are mostly volatile or easily removable byproducts. In this perspective, we have discussed the utilization of these reductively disilylated N-heterocyclic systems as versatile reagents in the salt-free reduction of transition metals (A) and main-group halides (B), in organic transformations (C) and in materials syntheses (D).

Reductive Depolymerization of Plastic Waste Catalyzed by Zn(OAc)2 ⋅ 2H2 O

Plastic pollution is one of the biggest problems all over the world. Beyond change/awareness of consumer behavior, there is an urgent need to search for efficient, economical and environmentally friendly catalysts for the valorization of plastic waste to value-added compounds. This work describes the reductive depolymerization of several types of plastic waste into value-added compounds, including 1,6-hexanediol, 1,2-propanediol, p-xylene and tetrahydrofuran, in good yields using the eco-friendly, air-stable, commercially available and very cheap catalyst Zn(OAc)₂  ⋅ 2H₂ O. This is the first example of the reductive depolymerization of polyester waste catalyzed by a zinc catalyst. Moreover, the catalytic system silane/Zn(OAc)₂  ⋅ 2H₂ O was successfully applied to the reduction of polycaprolactone (PCL) on the gram scale with good yield and also to the selective reductive depolymerization of plastic mixtures. Finally, this work demonstrated that the catalyst Zn(OAc)₂  ⋅ 2H₂ O can be used in at least 7 cycles with good yields.

Bis(2,4-dioxo-pentan-3-ido-κ2 O,O')dioxidomolyb-denum(VI): a redetermination

The title compound, [Mo(C5H7O2)2O2] or cis-[MoO2(acac)2] (acac is acetyl-acetonate), contains a molybdenum(VI) atom coordinated by two acetyl-acetonate ligands and two doubly bonded oxido ligands in a distorted octa-hedral shape. The mol-ecule is chiral and the asymmetric unit contains two independent mol-ecules (one Δ, one Λ). Extensive C-H⋯O contacts are present throughout the structure. Data were collected at 100 K, providing higher precision of unit-cell parameters and atomic positions than previous determinations [Kamenar et al. (1973 ▸). Cryst. Struct. Commun. 2, 41-44.; Krasochka et al. (1975). Zh. Strukt. Khim. 16, 696-698].

Clean protocol for deoxygenation of epoxides to alkenes via catalytic hydrogenation using gold

Au NP catalyst combined with triethylphosphite, P(OEt)₃, is remarkably more reactive than solely Au NPs for the selective deoxygenation of epoxides to alkenes.

Nickel phosphide nanoalloy catalyst for the selective deoxygenation of sulfoxides to sulfides under ambient H2 pressure

Exploring novel catalysis by less common, metal-non-metal nanoalloys is of great interest in organic synthesis. We herein report a titanium-dioxide-supported nickel phosphide nanoalloy (nano-Ni2P/TiO2) that exhibits high catalytic activity for the deoxygenation of sulfoxides. nano-Ni2P/TiO2 deoxygenated various sulfoxides to sulfides under 1 bar of H2, representing the first non-noble metal catalyst for sulfoxide deoxygenation under ambient H2 pressure. Spectroscopic analyses revealed that this high activity is due to cooperative catalysis by nano-Ni2P and TiO2.

Rhenium(V)-oxo complexes [ReOX2(N∩O)(EPh3)] (X=Cl, Br, I; E=P, As) – synthesis, structure, spectroscopy, and catalytic properties

The present review aims to give a comprehensive survey about the chemistry of rhenium(V)-oxo complexes of general formula [ReOX2(N∩O)(EPh3)], where X=Cl, Br, I, E=P, As, and N∩O stands for uninegative chelating N∩O-ligand, carried out within the last four decades. In addition to the synthesis aspects, the available structural data as well as the results issued from techniques such as infrared and ultraviolet-visible spectroscopies are collected and discussed. Furthermore, a brief description of the applications of these compounds in catalysis is included.

Facile Activation of Triarylboranes by Rhenium(V) Oxo Imido Complexes

We report the synthesis and reactivity studies of a pair of rhenium(V) oxo imido complexes. Oxidation of the rhenium(III) terminal oxo ORe(η²-DHF)(BDI) (DHF = dihydrofulvalene, BDI = N,N'-bis(2,6-diisopropylphenyl)-3,5-dimethyl-β-diketiminate) with organic azides R-N₃ (R = ^tBu, 2,6-diisopropylphenyl) yields the title complexes. Computational studies confirm that the rhenium oxo moieties of these complexes are polarized and correspondingly nucleophilic, owing to the preferential π bonding of the imido ligand to the Re center. This asymmetry in the metal-ligand multiple bond electronic structure facilitates the ready activation of B-C bonds in triarylboranes (BPh₃ and B(C₆F₅)₃), yielding rhenium(V) aryl borinate complexes. In the case of BPh₃, subsequent cyclometalation of the 1,2-addition products was found to take place upon heating, ejecting benzene to form bidentate diphenylborinate complexes.

Deoxydehydration of vicinal diols by homogeneous catalysts: a mechanistic overview

Deoxydehydration (DODH) is an important reaction for the upconversion of biomass-derived polyols to commodity chemicals such as alkenes and dienes. DODH can be performed by a variety of early metal-oxo catalysts incorporating Re, Mo and V. The varying reduction methods used in the DODH catalytic cycle impact the product distribution, reaction mechanism and the overall yield of the reaction. This review surveys the reduction methods commonly used in homogeneous DODH catalyst systems and their impacts on yield and reaction conditions.

Recent Advances in the Deoxydehydration of Vicinal Diols and Polyols

Deoxydehydration (DODH) is one of the most promising tools to reduce the oxygen content of biomass (sugars and polyols) and provide analogues of platform chemicals that are derived from fossil resources. This reaction converts a vicinal diol into an alkene and is typically catalyzed by high-oxidation-state metal-oxo compounds in the presence of a stoichiometric reductant, with examples of both homogeneous and heterogeneous systems. This minireview will highlight the developments in this field over the past 5 years and focus on efforts to solve the problems that currently prevent DODH being performed on a commercial scale, including the nature of the reductant, substrate scope and selectivity, and catalyst recovery and expense.

Deoxydehydration of glycerol in presence of rhenium compounds: reactivity and mechanistic aspects

Re compounds in different oxidation states are activated during a delay time into an active Re alkoxide precipitate catalysing the DODH of glycerol.

Highly Selective Oxidation of Ethyl Lactate to Ethyl Pyruvate Catalyzed by Mesoporous Vanadia-Titania

The direct oxidative dehydrogenation of lactates with molecular oxygen is a “greener” alternative for producing pyruvates. Here we report a one-pot synthesis of mesoporous vanadia–titania (VTN), acting as highly efficient and recyclable catalysts for the conversion of ethyl lactate to ethyl pyruvate. These VTN materials feature high surface areas, large pore volumes, and high densities of isolated vanadium species, which can expose the active sites and facilitate the mass transport. In comparison to homogeneous vanadium complexes and VO_x/TiO₂ prepared by impregnation, the meso-VTN catalysts showed superior activity, selectivity, and stability in the aerobic oxidation of ethyl lactate to ethyl pyruvate. We also studied the effect of various vanadium precursors, which revealed that the vanadium-induced phase transition of meso-VTN from anatase to rutile depends strongly on the vanadium precursor. NH₄VO₃ was found to be the optimal vanadium precursor, forming more monomeric vanadium species. V⁴⁺ as the major valence state was incorporated into the lattice of the NH₄VO₃-derived VTN material, yielding more V⁴⁺–O–Ti bonds in the anatase-dominant structure. In situ DRIFT spectroscopy and density functional theory calculations show that V⁴⁺–O–Ti bonds are responsible for the dissociation of ethyl lactate over VTN catalysts and for further activation of the deprotonation of β-hydrogen. Molecular oxygen can replenish the surface oxygen to regenerate the V⁴⁺–O–Ti bonds.

Understanding the oxidative dehydrogenation of ethyl lactate to ethyl pyruvate over vanadia/titania

We studied the vapour-phase oxidative dehydrogenation of ethyl lactate to ethyl pyruvate over V₂O₅/TiO₂ catalysts in a fixed-bed reactor.