“Click”-reaction: An alternative tool for new architectures of porphyrin based derivatives

Organometallic Ir(III) complexes: post-synthetic modification, photophysical properties and binuclear complex construction

Two methods of post-synthetic modification (Suzuki coupling and CuAAC click-reaction) were applied to Ir(III) complexes [Ir(C^{^}N)₂N^{^}N]⁺ to provide the second highly selective donor site. One family of functionalized complexes was used to demonstrate the potential of post-synthetic modification for controlled construction of d-d and d-f binuclear complexes. The complexes obtained were characterized by CHN elemental analysis, NMR spectroscopy, ESI mass-spectrometry, FTIR spectroscopy and single crystal X-ray diffraction analysis. By means of XPS and NEXAFS spectroscopy the coordination of diimine donor site to the Ln(III) centre has been definitely confirmed. The photophysical properties of mono- and binuclear complexes were carefully investigated, and the evolution of luminescent characteristics during the formation of a system of connected metallocenters is also discussed. TDDFT calculations were used to describe the luminescence mechanism and to confirm the conclusions made on the basis of experimental data.

Layered Copper Hydroxide Salts as Catalyst for the “Click” Reaction and Their Application in Methyl Orange Photocatalytic Discoloration

The 1,2,3-triazoles are an important class of organic compounds that are found in a variety of biologically active compounds. The most usual and efficient methodology to synthetize these compounds is the Copper-catalyzed Azide–Alkyne Cycloaddition (CuAAC), preferably by use of click chemistry principles. Therefore, the development of simple, robust, easily accessible and efficient materials as catalysts for this kind of reaction is highly desirable. In this sense, layered hydroxide salts (LHS) emerge as an interesting alternative for the click reaction. Thus, we describe herein the preparation and characterization of copper (II) layered hydroxide salts and their application as catalysts for the CuAAC reaction under solvent-free conditions. This synthetic methodology of CuAAC reaction is attractive as it follows several concepts of green chemistry, such as being easy to perform, allowing purification without chromatographic column, the process forming no sub-products, affording the desired 1,2,3-traizoles in the specific 1,4-disubstituted position in high yield, and having a short reaction time. Moreover, the photocatalysis for the degradation of methyl orange was also highly efficient using the same catalyst.

Copper(i)-catalyzed click chemistry in deep eutectic solvent for the syntheses of β-d-glucopyranosyltriazoles†

In the last two decades, click chemistry has progressed as a powerful tool in joining two different molecular units to generate fascinating structures with a widespread application in various branch of sciences. copper(i)-catalyzed azide–alkyne cycloaddition (CuAAC) reaction, also known as click chemistry, has been extensively utilized as a versatile strategy for the rapid and selective formation of 1,4-disubstituted 1,2,3-triazoles. The successful use of CuAAC reaction for the preparation of biologically active triazole-attached carbohydrate-containing molecular architectures is an emerging area of glycoscience. In this regard, a well-defined copper(i)–iodide complex (1) with a tridentate NNO ligand (L₁) was synthesized and effectively utilized as an active catalyst. Instead of using potentially hazardous reaction media such as DCM or toluene, the use of deep eutectic solvent (DES), an emerging class of green solvent, is advantageous for the syntheses of triazole-glycohybrids. The present work shows, for the first time, the successful use of DES as a reaction medium to click various glycosides and terminal alkynes in the presence of sodium azide. Various 1,4-disubstituted 1,2,3-glucopyranosyltriazoles were synthesized and the pure products were isolated by using a very simple work-up process (filtration). The reaction media was recovered and recycled in five consecutive runs. The presented catalytic protocol generated very minimum waste as reflected by a low E-factor (2.21–3.12). Finally, the optimized reaction conditions were evaluated with the CHEM21 green metrics toolkit.

A well-defined copper(i)–iodide complex was effectively utilized as an active catalyst for azide–alkyne cycloaddition to synthesize various 1,4-disubstituted 1,2,3-glucopyranosyltriazoles in deep eutectic solvents as a reusable reaction media.

CuAAC-inspired synthesis of 1,2,3-triazole-bridged porphyrin conjugates: an overview

Among all the available approaches in organic synthesis, the "click chemistry" protocol is very common nowadays to covalently connect two diverse moieties in a single framework. Therefore, this review focuses on the synthesis and photophysical studies of β- and meso-substituted and 1,2,3-triazole-fused porphyrin conjugates. All of the porphyrin conjugates discussed here are synthesized via a copper(I)-catalyzed Huisgen 1,3-dipolar cycloaddition reaction between an azide and a terminal alkyne, also popular as "click reaction" or CuAAC reaction. Moreover, the 1,2,3-triazole ring also serves as a spacer and an electron transfer bridge between the porphyrin and the attached chromophores. In order to provide a critical overview of the synthesis and properties of various porphyrin-triazole hybrids, this review will discuss some of the key reactions involved in the preparation of triazole-linked porphyrin conjugates.

Post-Functionalization of Organometallic Complexes via Click-Reaction

CuAAC (Cu catalyzed azide-alkyne cycloaddition) click-reaction is a simple and powerful method for the post-synthetic modification of organometallic complexes of transition metals. This approach allows the selective introduction of additional donor sites or functional groups to the periphery of the ligand environment. This is especially important if a metalloligand with free donor sites, which are of the same nature as the primary site for the coordination of the primary metal, has to be created. The concept of post-synthetic modification of organometallic complexes by click-reaction is relatively recent and the currently available experimental material does not yet allow us to identify trends and formulate recommendations to address specific problems. In the present study, we have applied the CuAAC reaction for the post-synthetic modification of diimine mononuclear complexes Re(I), Pt(II) and Ir(III) with C≡C bonds at the periphery of the ligand environment and demonstrated that click-chemistry is a powerful tool for the tunable chemical post-synthetic modification of coordination compounds.

Graphene quantum dots-porphyrins/phthalocyanines multifunctional hybrid systems: from interfacial dialogue to applications

Engineered well-ordered hybrid nanomaterials are at a symbolically pivotal point, just ahead of a long-anticipated human race transformation. Incorporating newer carbon nanomaterials like graphene quantum dots (GQDs) with tetrapyrrolic porphyrins...

Synthesis and Applications of Porphyrin-Biomacromolecule Conjugates

With potential applications in materials and especially in light-responsive biomedicine that targets cancer tissue selectively, much research has focused on developing covalent conjugation techniques to tether porphyrinoid units to various biomacromolecules. This review details the key synthetic approaches that have been employed in the recent decades to conjugate porphyrinoids with oligonucleotides and peptides/proteins. In addition, we provide succinct discussions on the subsequent applications of such hybrid systems and also give a brief overview of the rapidly progressing field of porphyrin-antibody conjugates. Since nucleic acid and peptide systems vary in structure, connectivity, functional group availability and placement, as well as stability and solubility, tailored synthetic approaches are needed for conjugating to each of these biomacromolecule types. In terms of tethering to ONs, porphyrins are typically attached by employing bioorthogonal chemistry (e.g., using phosphoramidites) that drive solid-phase ON synthesis or by conducting post-synthesis modifications and subsequent reactions (such as amide couplings, hydrazide-carbonyl reactions, and click chemistry). In contrast, peptides and proteins are typically conjugated to porphyrinoids using their native functional groups, especially the thiol and amine side chains. However, bioorthogonal reactions (e.g., Staudinger ligations, and copper or strain promoted alkyne-azide cycloadditions) that utilize de novo introduced functional groups onto peptides/proteins have seen vigorous development, especially for site-specific peptide-porphyrin tethering. While the ON-porphyrin conjugates have largely been explored for programmed nanostructure self-assembly and artificial light-harvesting applications, there are some reports of ON-porphyrin systems targeting clinically translational applications (e.g., antimicrobial biomaterials and site-specific nucleic acid cleavage). Conjugates of porphyrins with proteinaceous moieties, on the other hand, have been predominantly used for therapeutic and diagnostic applications (especially in photodynamic therapy, photodynamic antimicrobial chemotherapy, and photothermal therapy). The advancement of the field of porphyrinoid-bioconjugation chemistry from basic academic research to more clinically targeted applications require continuous fine-tuning in terms of synthetic strategies and hence there will continue to be much exciting work on porphyrinoid-biomacromolecule conjugation.

Click reaction in the synthesis of dendrimer drug-delivery systems

Drug delivery systems are technologies designed for the targeted delivery and controlled release of medicinal agents. Among the materials employed as drug delivery systems, dendrimers have gained increasing interest in recent years because of their properties and structural characteristics. The use of dendrimer-nanocarrier formulations enhances the safety and bioavailability, increases the solubility in water, improves stability and pharmacokinetic profile, and enables efficient delivery of the target drug to a specific site. However, the synthesis of dendritic architectures through convergent or divergent methods has drawbacks and limitations that disrupt aspects related to design and construction and consequently slow down the transfer from academia to industry. In that sense, the implementation of click chemistry has been received increasing attention in the last years, because offers new efficient approaches to obtain dendritic species in good yields and higher monodispersity. This review focuses on recent strategies for building dendrimer drug delivery systems using click reactions from 2015 to early 2021. The dendritic structures showed in this review are based on β-cyclodextrins (β-CD), poly(amidoamine) (PAMAM), dendritic poly (lysine) (PLLD), dimethylolpropionic acid (bis-MPA), phosphoramidate (PAD), and poly(propargyl alcohol-4-mercaptobutyric (PPMA).

Bio-Orthogonal Conjugation of a Cationic Metalloporphyrin to BSA and HSA via "Click" Chemistry

In this study, we present a convenient method for the labelling of tyrosine residues on bovine serum albumin (BSA) and human serum albumin (HSA) and report for the first time their subsequent bio-orthogonal conjugation with porphyrins via "click" chemistry. We demonstrate that these serum proteins can be labelled with an alkyne-diazonium heterobifunctional linker and can then undergo chemo-selective bio-orthogonal conjugation with a water-soluble azido metalloporphyrin via "click" chemistry to yield protein-conjugates that retain their photodynamic properties. In our hands, this method was found to be highly reproducible, scalable, and tuneable which allows for the production of bioconjugates where the porphyrin-protein conjugate not only retains an ability to generate singlet oxygen but possess an enhanced relative singlet oxygen quantum yields relative to the porphyrin alone. Furthermore, we have investigated the photochemical properties of these conjugates through photospectrometric techniques and have determined that the porphyrin macrocycles remain appreciably photostable under light irradiation. Our phototoxic protein-photosensitizer-conjugates show excellent photodynamic activity against a human colorectal adenocarcinoma cancer cell line (HT-29) with cell viabilities of 7.7±0.5 % (IC50 8.76±2.14 μM) and 1.7±1.9 % (IC50 8.48±5.11 μM) for BSA and HAS, respectively, when irradiated with 20 J cm-2 of white-light. Importantly, neither of the conjugates was found to possess any significant "dark" toxicity even at concentrations of 100 μM. Furthermore, the natural fluorescent properties of the bioconjugates allowed for the determination of cellular uptake in vitro via fluorescence microscopy thus highlighting the potential theranostic applications of these unique protein-drug-conjugates.

Cu(I)-Catalyzed Click Chemistry in Glycoscience and Their Diverse Applications

Copper(I)-catalyzed 1,3-dipolar cycloaddition between organic azides and terminal alkynes, commonly known as CuAAC or click chemistry, has been identified as one of the most successful, versatile, reliable, and modular strategies for the rapid and regioselective construction of 1,4-disubstituted 1,2,3-triazoles as diversely functionalized molecules. Carbohydrates, an integral part of living cells, have several fascinating features, including their structural diversity, biocompatibility, bioavailability, hydrophilicity, and superior ADME properties with minimal toxicity, which support increased demand to explore them as versatile scaffolds for easy access to diverse glycohybrids and well-defined glycoconjugates for complete chemical, biochemical, and pharmacological investigations. This review highlights the successful development of CuAAC or click chemistry in emerging areas of glycoscience, including the synthesis of triazole appended carbohydrate-containing molecular architectures (mainly glycohybrids, glycoconjugates, glycopolymers, glycopeptides, glycoproteins, glycolipids, glycoclusters, and glycodendrimers through regioselective triazole forming modular and bio-orthogonal coupling protocols). It discusses the widespread applications of these glycoproducts as enzyme inhibitors in drug discovery and development, sensing, gelation, chelation, glycosylation, and catalysis. This review also covers the impact of click chemistry and provides future perspectives on its role in various emerging disciplines of science and technology.

Three-component coupling reaction for the synthesis of fully substituted triazoles: reactivity control of Cu-acetylide toward alkyl azides and diazo compounds

Herein, we report a Cu-catalyzed three-component coupling reaction of alkynes, azides, and diazo compounds for the synthesis of fully substituted triazoles.

Azides and Porphyrinoids: Synthetic Approaches and Applications. Part 1-Azides, Porphyrins and Corroles

Azides and porphyrinoids (such as porphyrin and corrole macrocycles) can give rise to new derivatives with significant biological properties and as new materials' components. Significant synthetic approaches have been studied. A wide range of products (e.g., microporous organic networks, rotaxane and dendritic motifs, dendrimers as liquid crystals, as blood substitutes for transfusions and many others) can now be available and used for several medicinal and industrial purposes.

Synthesis, Characterization and Photodynamic Activity against Bladder Cancer Cells of Novel Triazole-Porphyrin Derivatives

Novel triazole-porphyrin derivatives (TZ-PORs) were synthesized through the Heck reaction and then incorporated into polyvinylpyrrolidone (PVP) micelles. After verifying that this incorporation did not compromise the photophysical and chemical features of TZ-PORs as photosensitizers, the phototoxicity of the formulations towards cancer cells was screened. Biological studies show high photodynamic activity of all PVP-TZ-POR formulations against a bladder cancer cell line with a particular highlight to PVP-TZ-POR 7e and 7f that are able to significantly reduce HT-1376 cell viability, while they had no effect on control ARPE-19 cells.

Synthesis of Heterocyclic Triterpene Derivatives with Biological Activities via Click Reaction

:

Grignard reactions were applied to synthesize 2-ethynyl-2-hydroxylallobetulin 5 from 2-oxoallobetulin 4. The compound plays an important role as starting material to synthesize heterocyclic triterpenes using the click reaction. A series of new 1,2,3-triazole derivatives derived from 2-oxoallobetulin were successfully obtained. Under similar reaction conditions, only one compound 6 kept the hydroxyl functional group, while in the other compounds 7, 8 and 9, water was eliminated. The structures of obtained compounds were confirmed by 2D-NMR spectroscopy. The X-ray analysis of 5 indicated that only one isomer was obtained and in this compound, the hydroxyl group is situated on the same side as the ether group, the ethynyl group being situated at the opposite side. All products were also evaluated for their cytostatic activity in cell culture including L1210, CEM and Hela. Several compounds showed measurable cytostatic activity in the micromolar range.

Porphyrinoid–Fullerene Hybrids as Candidates in Artificial Photosynthetic Schemes

Natural photosynthesis inspired the scientific community to design and synthesize molecular assemblies that possess advanced light-harvesting and electron-transfer features. In this review, we present the preparation and the photophysical investigation of novel porphyrin–fullerene hybrids acting as artificial photosynthetic systems. Porphyrinoids stand as chlorophyll analogues and have emerged as suitable photosensitizers in supramolecular electron donor–acceptor hybrids. Fullerenes (C60) are versatile electron acceptors with small reorganization energy and low reduction potentials. The novel derivatives presented herein mimic the fundamental features of the photosynthetic reaction center, namely, light harvesting, charge separation, and charge transport. To this end, a comprehensive analysis on these key processes that occur in various porphyrin–fullerene entities is illustrated in this work.

Antimicrobial Photodynamic Polymeric Films Bearing Biscarbazol Triphenylamine End-Capped Dendrimeric Zn(II) Porphyrin

A novel biscarbazol triphenylamine end-capped dendrimeric zinc(II) porphyrin (DP 5) was synthesized by click chemistry. This compound is a cruciform dendrimer that bears a nucleus of zinc(II) tetrapyrrolic macrocycle substituted at the meso positions by four identical substituents. These are formed by a tetrafluorophenyl group that possesses a triazole unit in the para position. This nitrogenous heterocyclic is connected to a 4,4'-di(N-carbazolyl)triphenylamine group by means of a phenylenevinylene bridge, which allows the conjugation between the nucleus and this external electropolymerizable carbazoyl group. In this structure, dendrimeric arms act as light-harvesting antennas, increasing the absorption of blue light, and as electroactive moieties. The electrochemical oxidation of the carbazole groups contained in the terminal arms of the DP 5 was used to obtain novel, stable, and reproducible fully π-conjugated photoactive polymeric films (FDP 5). First, the spectroscopic characteristics and photodynamic properties of DP 5 were compared with its constitutional components derived of porphyrin P 6 and carbazole D 7 moieties in solution. The fluorescence emissions of the dendrimeric units in DP 5 were more strongly quenched by the tetrapyrrolic macrocycle, indicating photoinduced energy transfer. In addition, FDP 5 film showed the Soret and Q absorption bands and red fluorescence emission of the corresponding zinc(II) porphyrin. Also, FDP 5 film was highly stable to photobleaching, and it was able to produce singlet molecular oxygen in both N,N-dimethylformamide (DMF) and water. Therefore, the porphyrin units embedded in the polymeric matrix of FDP 5 film mainly retain the photochemical properties. Photodynamic inactivation mediated by FDP 5 film was investigated in Staphylococcus aureus and Escherichia coli. When a cell suspension was deposited on the surface, complete eradication of S. aureus and a 99% reduction in E. coli survival were found after 15 and 30 min of irradiation, respectively. Also, FDP 5 film was highly effective to eliminate individual bacteria attached to the surface. In addition, photodynamic inactivation (PDI) sensitized by FDP 5 film produced >99.99% bacterial killing in biofilms formed on the surface after 60 min irradiation. The results indicate that FDP 5 film represents an interesting and versatile photodynamic active material to eradicate bacteria as planktonic cells, individual attached microbes, or biofilms.

1-Iodobuta-1,3-diynes in Copper-Catalyzed Azide-Alkyne Cycloaddition: A One-Step Route to 4-Ethynyl-5-iodo-1,2,3-triazoles

Cu-catalyzed 1,3-dipolar cycloaddition of iododiacetylenes with organic azides using iodotris(triphenylphosphine)copper(I) as a catalyst was found to be an efficient one-step synthetic route to 5-iodo-4-ethynyltriazoles. The reaction is tolerant to various functional groups in both butadiyne and azide moieties. The synthetic application of 5-iodo-4-ethynyl triazoles obtained was also evaluated: the Sonogashira coupling with alkynes resulted in unsymmetrically substituted triazole-fused enediyne systems, while the Suzuki reaction yielded the corresponding 5-aryl-4-ethynyl triazoles.

Insights into the mechanism and aging of a noble-metal free H2-evolving dye-sensitized photocathode

Co-grafting of a cobalt diimine–dioxime catalyst and push–pull organic dye on NiO yields a photocathode evolving hydrogen from aqueous solution under sunlight, with equivalent performances compared to a dyad-based architecture using similar components.

Dye-sensitized photo-electrochemical cells (DS-PECs) form an emerging technology for the large-scale storage of solar energy in the form of (solar) fuels because of the low cost and ease of processing of their constitutive photoelectrode materials. Preparing such molecular photocathodes requires a well-controlled co-immobilization of molecular dyes and catalysts onto transparent semiconducting materials. Here we used a series of surface analysis techniques to describe the molecular assembly of a push–pull organic dye and a cobalt diimine–dioxime catalyst co-grafted on a p-type NiO electrode substrate. (Photo)electrochemical measurements allowed characterization of electron transfer processes within such an assembly and to demonstrate for the first time that a Co^I species is formed as the entry into the light-driven H₂ evolution mechanism of a dye-sensitized photocathode. This co-grafted noble-metal free H₂-evolving photocathode architecture displays similar performances to its covalent dye–catalyst counterpart based on the same catalytic moiety. Post-operando time-of-flight secondary ion mass spectrometry (ToF-SIMS) analysis of these photoelectrodes after extensive photoelectrochemical operation suggested decomposition pathways of the dye and triazole linkage used to graft the catalyst onto NiO, providing grounds for the design of optimized molecular DS-PEC components with increased robustness upon turnover.

Porous metalloporphyrinic nanospheres constructed from metal 5,10,15,20-tetraksi(4′-ethynylphenyl)porphyrin for efficient catalytic degradation of organic dyes

Novel conjugated metalloporphyrin polymers (PP-EPMn and PX-EPMn) were synthesized by the Sonogashira coupling reaction with Mn(iii)5,10,15,20-tetraksi(4′-ethynylphenyl)porphyrin ([p-ethynyl]₄PMn) as building block, and with phenylene and xenyl groups as bridges, respectively. Fine nanospheres were obtained through control of the reaction conditions. The two polymer nanospheres were characterized in detailed by BET, FE-SEM, HR-TEM, FT-IR, UV-Vis and XPS, revealing that they were highly ordered, highly developed microporous and super-conjugated metalloporphyrin polymers with large surface areas and uniform pore sizes. Their electrochemical behaviors and hydrophilicity were also investigated. With the synergistic effects of porous nanosphere structure and conjugated covalent structure, PP-EPMn and PX-EPMn showed excellent catalytic activity and reusability in the catalytic degradation of methylene blue (3,7-bis(dimethylamino)-5-phenothiazinium chloride) in aqueous solution. The good hydrophilicity of the polymer nanospheres promoted the catalytic degradation. In particular, unlike Fenton degradation systems that require acidic conditions, PP-EPMn degraded methylene blue significantly better under alkaline conditions, which implied a good prospect in treating industrial methylene blue dye wastewater.

A kind of novel conjugated metalloporphyrin polymers were synthesized by the Sonogashira coupling reaction. They were microporous nanospherical polymers and showed excellent catalytic activities and reusability in degradation of methylene blue.

Effect of the triazole ring in zinc porphyrin-fullerene dyads on the charge transfer processes in NiO-based devices

Three covalently linked donor–acceptor zinc porphyrin–fullerene (ZnP–C₆₀) dyads were tested as sensitizers in NiO-based dye-sensitized solar cells (DSCs).

Metal-catalyzed 1,3-dipolar cycloaddition reactions of nitrile oxides

In this review recent advances in the metal-catalyzed 1,3-dipolar cycloaddition reactions of nitrile oxides are highlighted, covering references from the period 2000 until August 2018.

Biological evaluation of a Porphyrin-SPION nanoconjugate as an antimicrobial magnetic photosensitizer

The present work describes the use of a magnetic porphyin (5-(4-carboxy-phenyl)-10,15,20-triphenyl-21H, 23H-porphyrin TPP) nanoconjugate (SPION-TPP) for destroying pathogenic bacteria followed by the recovery of the magnetic photosensitizer. SPION-TPP was tested for its activity against two different gram-positive bacterial strains (Staphylococcus aureus and Steptoccoccus mutans). It is observed that SPION-TPP at a very low concentration of 0.5 [Formula: see text]M is effective in destroying gram-positive bacteria (10[Formula: see text]–10[Formula: see text] CFU ml[Formula: see text] S. aureus with several orders reduction and few orders in S. mutans. The aim of this work is to combine photoactivity against microorganisms imparted by the photosensitizer with the possibility of recovering the nanoconstruct with magnets for disposal/reuse.

Porphyrinoid rotaxanes: building a mechanical picket fence

Building on recent progress in the synthesis of functional porphyrins for a range of applications using the Cu-mediated azide-alkyne cycloaddition (CuAAC) reaction, we describe the active template CuAAC synthesis of interlocked triazole functionalised porphyrinoids in excellent yield. By synthesising interlocked analogues of previously studied porphyrin-corrole conjugates, we demonstrate that this approach gives access to rotaxanes in which the detailed electronic properties of the axle component are unchanged but whose steric properties are transformed by the mechanical "picket fence" provided by the threaded rings. Our results suggest that interlocked functionalised porphyrins, readily available using the AT-CuAAC approach, are sterically hindered scaffolds for the development of new catalysts and materials.

CuAAC-based assembly and characterization of a ruthenium-copper dyad containing a diimine-dioxime ligand framework

The design of molecular dyads combining a light-harvesting unit with an electroactive centre is highly demanded in the field of artificial photosynthesis. The versatile Copper-catalyzed Azide-Alkyne Cycloaddition (CuAAC) procedure was employed to assemble a ruthenium tris-diimine unit to an unprecedented azide-substituted copper diimine-dioxime moiety. The resulting Ru^IICu^II dyad 4 was characterized by electrochemistry, ¹H NMR, EPR, UV-visible absorption, steady-state fluorescence and transient absorption spectroscopies. Photoinduced electron transfer from the ruthenium to the copper centre upon light-activation in the presence of a sacrificial electron donor was established thanks to EPR-monitored photolysis experiments, opening interesting perspectives for photocatalytic applications.

Tungsten(VI)-Copper(I)-Sulfur Cluster-Supported Metal-Organic Frameworks Bridged by in Situ Click-Formed Tetrazolate Ligands

Six analogous two-dimensional (2D) [Tp*WS₃Cu₃]-based (Tp* = hydridotris(3,5-dimethylpyrazol-1-yl)borate) networks, namely, {[(Tp*WS₃Cu₃)₂L₃](μ₃-N₃)}_n (2: L = 5-methyltetrazolate (Mtta); 3a: L = 5-ethyltetrazolate (Etta)) and {[(Tp*WS₃Cu₃)₂L₃]BF₄}_n (3b: L = Etta; 4: L = 5-propyltetrazolate (Ptta); 5: L = 5-butyltetrazolate (Btta); 6: L = 5-pentyltetrazolate (Petta)) were synthesized by reactions of [Et₄N][Tp*WS₃] (1), [Cu(CH₃CN)₄]BF₄, NaN₃, and NH₄BF₄ in different nitrile solvents (CH₃(CH₂)_nCN, n = 0, 1, 2, 3, and 4) under solvothermal conditions. In the structures of 2-6, each alkyl tetrazolate L as a bridging ligand was generated in situ from the "click" reaction between azide and nitrile. These 2D (6,3) networks support two types of voids wherein the pendant alkyl groups are accommodated. A tetrahedron cage-like cluster [Tp*W(μ₃-S)₃(μ₃-S')Cu₃]₄ (7) was also formed in some of the above reactions and can be readily separated by solvent extraction. The proportion of 7 increased with the elongation of the alkyl chains and finally became the exclusive product when heptylnitrile was employed. Further use of CuCN as a surrogate for [Cu(CH₃CN)₄]BF₄ with the aim of introducing additional CN bridges into the network led us to isolate a tetrazolate-free compound, {[Et₄N]{(Tp*WS₃Cu₃)[Cu₂(CN)_4.5]}₂·2PhCH₂CN}_n (8·2PhCH₂CN), a unique 2D network that features {(Tp*WS₃Cu₃)[Cu₂(CN)₅]}₂^2-, {(Tp*WS₃Cu₃)₃[Cu₃(CN)₇]₂[Cu(CN)₃]}^4-, and {(Tp*WS₃Cu₃)[Cu₄(CN)₉]}₂^6- ring subunits. Compounds 5-8 are soluble in DMF and exhibit a reverse saturable absorption and self-focusing third-order nonlinear optical (NLO) effect at 532 nm with hyperpolarizability γ values in the range of 4.43 × 10^-30 to 5.40 × 10^-30 esu, which are 400-500 times larger than that of their precursor 1. The results provide an interesting insight into the synergetic synthetic strategy related to the assembly of the [Tp*WS₃Cu₃]²⁺ cluster core, the "click" formation of the tetrazolate ligands, and the construction of the [Tp*WS₃Cu₃]²⁺ cluster-based 2D networks.

Synthetic methodologies and spatial organization of metal chelate dendrimers and star and hyperbranched polymers

The synthetic methodologies, physico-chemical peculiarities, properties, and structure of metal chelate dendrimers and star and hyperbranched polymers are considered.

Click-on fluorescent triazolyl coumarin peptidomimetics as inhibitors of human breast cancer cell line MCF-7

A fluorogenic click reaction which enables the formation of fluorescent and bioactive triazolylcoumarinsviaa photoinduced electron transfer process is described.

Synthesis and Functionalization of Porphyrins through Organometallic Methodologies

This review focuses on the postfunctionalization of porphyrins and related compounds through catalytic and stoichiometric organometallic methodologies. The employment of organometallic reactions has become common in porphyrin synthesis. Palladium-catalyzed cross-coupling reactions are now standard techniques for constructing carbon-carbon bonds in porphyrin synthesis. In addition, iridium- or palladium-catalyzed direct C-H functionalization of porphyrins is emerging as an efficient way to install various substituents onto porphyrins. Furthermore, the copper-mediated Huisgen cycloaddition reaction has become a frequent strategy to incorporate porphyrin units into functional molecules. The use of these organometallic techniques, along with the traditional porphyrin synthesis, now allows chemists to construct a wide range of highly elaborated and complex porphyrin architectures.

Click-chemistry approaches to π-conjugated polymers for organic electronics applications

Given the wide utility of click-chemistry reactions for the preparation of simple moieties within large architecturally complex materials, this minireview article aims at surveying papers exploring their scope in the area of π-conjugated polymers for application in organic electronics to enable advanced functional properties.