Synthetic methods and potential applications of transition metal dichalcogenide/graphene nanocomposites

Edge-enhanced super microgenerator based on a two-dimensional Schottky junction

Super microgenerator (SMG) refers to a generator that can efficiently convert extremely weak external stimuli into electrical energy and has a small size, high power density and long lifespan, offer ground-breaking solutions for powering wearable devices, wireless distributed sensors and implanted medical equipment. However, the friction and wear between the interfaces of ordinary microgenerator results in an extremely low lifespan. Here, we present a prototype of SMGs based on a 2D-2D (graphite-MoS2) Schottky contact in the state of structural superlubricity (no wear and nearly zero friction between two contacted solid surfaces). What is even more interesting is when the graphite flake is slid from the bulk to the edge of MoS2, the output current will enhance from 31 to 56 A m-2. Through the I-V curve measurement, we found that the conductive channel across the junction can be activated and further enhanced at the edge of MoS2compare to bulk, which provide the explanation for the above-mentioned edge enhancement of power generation. Above results provide the design principles of high-performance SMGs based on 2D-2D Schottky junctions.

Unleashing the potential of tungsten disulfide: Current trends in biosensing and nanomedicine applications

The discovery of graphene ignites a great deal of interest in the research and advancement of two-dimensional (2D) layered materials. Within it, semiconducting transition metal dichalcogenides (TMDCs) are highly regarded due to their exceptional electrical and optoelectronic properties. Tungsten disulfide (WS2) is a TMDC with intriguing properties, such as biocompatibility, tunable bandgap, and outstanding photoelectric characteristics. These features make it a potential candidate for chemical sensing, biosensing, and tumor therapy. Despite the numerous reviews on the synthesis and application of TMDCs in the biomedical field, no comprehensive study still summarizes and unifies the research trends of WS2 from synthesis to biomedical applications. Therefore, this review aims to present a complete and thorough analysis of the current research trends in WS2 across several biomedical domains, including biosensing and nanomedicine, covering antibacterial applications, tissue engineering, drug delivery, and anticancer treatments. Finally, this review also discusses the potential opportunities and obstacles associated with WS2 to deliver a new outlook for advancing its progress in biomedical research.

Interfacial engineering of transition metal dichalcogenide/carbon heterostructures for electrochemical energy applications

To support the global goal of carbon neutrality, numerous efforts have been devoted to the advancement of electrochemical energy conversion (EEC) and electrochemical energy storage (EES) technologies. For these technologies, transition metal dichalcogenide/carbon (TMDC/C) heterostructures have emerged as promising candidates for both electrode materials and electrocatalysts over the past decade, due to their complementary advantages. It is worth noting that interfacial properties play a crucial role in establishing the overall electrochemical characteristics of TMDC/C heterostructures. However, despite the significant scientific contribution in this area, a systematic understanding of TMDC/C heterostructures' interfacial engineering is currently lacking. This literature review aims to focus on three types of interfacial engineering, namely interfacial orientation engineering, interfacial stacking engineering, and interfacial doping engineering, of TMDC/C heterostructures for their potential applications in EES and EEC devices. To accomplish this goal, a combination of experimental and theoretical approaches was used to allow the analysis and summary of the fundamental electrochemical properties and preparation strategies of TMDC/C heterostructures. Moreover, this review highlights the design and utilization of the interfacial engineering of TMDC/C heterostructures for specific EES and EEC devices. Finally, the challenges and opportunities of using interfacial engineering of TMDC/C heterostructures in practical EES and EEC devices are outlined. We expect that this review will effectively guide readers in their understanding, design, and application of interfacial engineering of TMDC/C heterostructures.

A novel of WS2-MoCuO3 supported with graphene quantum dot as counter electrode for dye-sensitized solar cells application

A novel tungsten disulfide-molybdenum copper oxide composite supported with graphene quantum dots (WM@GQDs) has been synthesized as a counter electrode (CE) for dye-sensitized solar cells (DSSCs) using a simple and low-cost ultrasonication method. The unique structure of WM@GQDs exhibits excellent power conversion efficiency due to its high catalytic activity and charge transport properties. In addition, the graphene quantum dots (GQDs) provide more active sites in the zero-dimensional materials for an I/I₃^- redox reaction which can improve the electrical and optical properties of the composite. The results indicate that the amount of GQDs in the composite affect the effectiveness of solar devices. When 0.9%wt of GQDs was used, the WM@GQDs composite achieved an efficiency of 10.38%, which is higher than that of the expensive platinum CE under the same conditions. The mechanism behind the improved power conversion efficiency (PCE) of the composite sample is also discussed in detail. Therefore, WM@GQDs can be an efficient material to replace platinum in DSSCs as a CE.

Electrochemical aptasensor based on carboxylated graphene oxide modified carbon paste electrode for strontium ultrasensitive detection

Determination of strontium ions (Sr²⁺) is crucial with regard to human health and environmental protection. In this work, an electrochemical aptasensor was designed using carboxylated graphene oxide (CGO)-modified carbon paste electrode (CGO/CPE) for ultrasensitive determination of Sr²⁺ ions. The electrochemical determination was accomplished with employing the constructed G-quadruplex (G4) aptamer at the surface of aptasensor in presence of carmoisine (CA) as an electrochemical label. Moreover, NH₂-functionalized aptamer was immobilized onto CGO/CPE via carboxylic group. Hence, differential pulse voltammetry was applied for detection of any possible signal changes of CA on the aptasensor surface. The reduction peak currents of CA in the absence and presence of Sr²⁺ in solution were different and this difference was linearly dependent to the concentration of Sr²⁺ in solution. The analytical results revealed that our novel aptasensor showed two appropriate linear ranges (0.1-8.0 pM and 3.0-20.0 nM) versus to Sr²⁺ ion concentrations with the limit of detection of 0.06 pM (S/N = 3). Excellent stability, selectivity and reproducibility were achieved with this new electrochemical aptasensor. Additionally, the aptasensor showed good achievements in analysis of Sr²⁺ in aqueous and urine real samples, which making this proposed method a promising candidate for electrochemical detection of Sr²⁺ in real samples.

Ligand-Mediated Exfoliation and Antibacterial Activity of 2H Transition-Metal Dichalcogenides

Transition-metal dichalcogenides (TMDs) exists mainly in two polymorphs, namely, 1T (metallic) and 2H (semiconducting). To tailor the characteristics and practical utility of TMDs for different applications, functionalization is essential. In our earlier studies, we have shown that functionalized 1T and 2H MoS₂ exhibit exceptionally high antibacterial activity. The functionalization and related biological applications of other 1T (chemically exfoliated) TMDs were reported, but regarding other 2H TMDs, the functionalization and antibacterial activity are not explored yet. Hence, here we prepared functionalized 2H TMDs such as WS₂, WSe₂, and MoSe₂ other than MoS₂ by using a positively charged thiolate surfactant ligand. Further, functionalized 2H TMDs were utilized for antibacterial activity against Gram-positive and Gram-negative bacteria for a comparative antibacterial analysis. Interestingly, we found disparity in activity among the functionalized 2H TMDs, that is, MoS₂ shows higher activity than WS₂ followed by MoSe₂ and WSe₂. The intracellular reactive oxygen species measurement was found to be in the order MoS₂ > WS₂ > MoSe₂ > WSe₂, which is solely responsible for variation in the activity of functionalized TMDs. These results indicate that the easy functionalization of all types TMDs by using thiol ligand and importance of core material should be considered while designing functionalized material for specific applications.

Label-Free Electrochemiluminescence Nano-aptasensor for the Ultrasensitive Detection of ApoA1 in Human Serum

A molybdenum sulfide/zirconium oxide/Nafion (MoS₂/ZrO₂/Naf) based electrochemiluminescence (ECL) aptasensor for the selective and ultrasensitive detection of ApoA1 is proposed, with Ru(bpy)₃ ²⁺ as the luminophore. The chitosan (CS) modification on the nanocomposite layer allowed glutaraldehyde (GLUT) cross-linking, resulting in the immobilization of ApoA1 aptamers. Scanning electron microscopy, tunneling electron microscopy, and energy dispersive X-ray spectroscopy were used to characterize the nanocomposite, while electrochemiluminescence (ECL), cyclic voltammetry, and electrochemical impedance spectroscopy were used to analyze the aptasensor assembly. The nanocomposite was used as an electrode modifier, which increased the intensity of the ECL signal. Due to the anionic environment produced on the sensor surface following the specific interaction of the ApoA1 biomarker with the sensor, more Ru(bpy)₃ ²⁺ were able to be electrostatically attached to the aptamer-ApoA1 complex, resulting in enhanced ECL signal. The ECL aptasensor demonstrated outstanding sensitivity for ApoA1 under optimal experimental conditions, with a detection limit of 53 fg/mL and a wide linear dynamic range of 0.1-1000 pg/mL. The potential practical applicability of this aptasensor was validated by analyzing ApoA1 in human serum samples, with recovery rates of 94-108% (n = 3). The proposed assay was found to be substantially better compared to the commercially available enzyme-linked immunosorbent assay method, as reflected from over 1500 times improvement in the detection limit for ApoA1.

Research progress on ZnSe and ZnTe anodes for rechargeable batteries

Transition-metal chalcogenides (TMCs) with tunable direct bandgaps and interlayer spacing are attractive for energy-related applications. Semiconducting zinc chalcogenides, especially their selenides (ZnSe) and tellurides (ZnTe), with enhanced conductivity, high theoretical capacity, low operation voltage and abundance, have appeared on the horizon and receive increasing interest in terms of electrochemical energy storage and conversion. Despite the existing typical obstruction owing to the large volume change, relatively low electrical conductivity and sluggish ion diffusion kinetics into the bulk phase, several effective strategies such as compositing, doping, nanostructuring, and electrode/cell design have exhibited promising applications. We herein provide a timely and systematic overview of recent research and significant advances regarding ZnSe, ZnTe and their hybrids/composites, covering synthesis to electrode design and to applications, especially in advanced Li/Na/K-ion batteries, as well as the reaction mechanisms thereof. It is hoped that the overview will shed new light on the development of ZnSe and ZnTe for next-generation rechargeable batteries.

Rapid Charge Separation Boosts Solar Hydrogen Generation at the Graphene-MoS2 Junction: Time-Domain Ab Initio Analysis

Transition metal dichalcogenides and graphene hybrids hold great promise for photovoltaics and photocatalysts. Using a combination of time-domain density functional theory and nonadiabatic molecular dynamics, we investigate the interplay between forward and backward electron transfer (ET), as well as energy relaxation in a van der Waals graphene-MoS₂ heterojunction. We demonstrated that built-in potential formed at the polarized interface produces charge separation upon photoexcitation. The electron left on graphene is injected into MoS₂ on an ultrafast time scale, which is notably faster than energy losses to heat regardless of the initial state energy. Once the electron is relaxed to the conduction band edge state of MoS₂, it transfers back and recombines with the hole remaining on graphene on ultrafast time scales by considering quantum transitions among multiple k points. The obtained time scales for ET, back-ET, and energy relaxation agree well with experimental data. The study reveals that ET that is faster than energy loss makes the graphene-MoS₂ heterojunction efficient for optoelectronic applications.

Electrogenerated chemiluminescence of Ru(bpy)32+ at MoS2 nanosheets modified electrode and its application in the sensitive detection of dopamine

Electrogenerated chemiluminescence (ECL) of Ru(bpy)₃²⁺ was studied at a MoS₂ nanosheets modified glassy carbon electrode (MoS₂NS/GCE) in neutral condition. Electrochemical results revealed that MoS₂ nanosheets could significantly catalyze the electrochemical oxidation of Ru(bpy)₃²⁺, as a result, strong anodic ECL was obtained. Several impact factors, such as the modified amount of MoS₂ nanosheets suspension, the pH value, and the concentration of Ru(bpy)₃²⁺, were investigated to obtain the optimal experimental condition. Dopamine exhibited apparent inhibiting effect on ECL intensity of Ru(bpy)₃²⁺-MoS₂ nanosheets through energy transfer process, and could be sensitively detected in the range of 1.0 × 10^-9 to 1.0 × 10^-4 mol L^-1. The linear equation between the decrease of ECL intensity and the logthium of dopamine concentration was determined as ΔI = 9965.02 + 1077.03lgC (C in mol L^-1), with the detection of 8.5 × 10^-10 mol L^-1 (3σ). The modified electrode exhibited satisfactory sensitivity, selectivity, and stability, which can be used to detect dopamine in real samples.

Two-Dimensional Transition Metal Chalcogenides for Alkali Metal Ions Storage

On the heels of exacerbating environmental concerns and ever-growing global energy demand, development of high-performance renewable energy-storage and -conversion devices has aroused great interest. The electrode materials, which are the critical components in electrochemical energy storage (EES) devices, largely determine the energy-storage properties, and the development of suitable active electrode materials is crucial to achieve efficient and environmentally friendly EES technologies albeit the challenges. Two-dimensional transition-metal chalcogenides (2D TMDs) are promising electrode materials in alkali metal ion batteries and supercapacitors because of ample interlayer space, large specific surface areas, fast ion-transfer kinetics, and large theoretical capacities achieved through intercalation and conversion reactions. However, they generally suffer from low electronic conductivities as well as substantial volume change and irreversible side reactions during the charge/discharge process, which result in poor cycling stability, poor rate performance, and low round-trip efficiency. In this Review, recent advances of 2D TMDs-based electrode materials for alkali metal-ion energy-storage devices with the focus on lithium-ion batteries (LIBs), sodium-ion batteries (SIBs), potassium-ion batteries (PIBs), high-energy lithium-sulfur (Li-S), and lithium-air (Li-O₂ ) batteries are described. The challenges and future directions of 2D TMDs-based electrode materials for high-performance LIBs, SIBs, PIBs, Li-S, and Li-O₂ batteries as well as emerging alkali metal-ion capacitors are also discussed.

A Novel Carbon Quantum Dots Signal Amplification Strategy Coupled with Sandwich Electrochemiluminescence Immunosensor for the Detection of CA15-3 in Human Serum

A sensitive sandwich electrochemiluminescence immunosensor was established by employing graphene oxide-PEI-carbon quantum dots (CQDs)-Au nanohybrid as probe to measure carbohydrate antigen 15-3 (CA15-3), a breast cancer biomarker. In this work, nanocomposites of Ag nanoparticles and polydopamine (AgNPs-PDA) were synthesized by redox reaction between dopamine and Ag⁺. The nanocomposite with high surface area can provide an efficient substrate for immobilizing initial antibody (Ab1). Carbon quantum dots (CQDs) are fixed on polyethylenimine-functionalized graphene oxide (PEI-GO) by amide bonds. Au nanoparticles are modified on CQDs-decorated PEI-GO substrates. The secondary antibody (Ab2) was immobilized by AuNPs/CQDs-PEI-GO composite. CQDs can be assembled onto the surface of an electrode by incorporation of CA15-3 with Ab1 and Ab2. Under the synergistic action of AgNPs, polydopamine, AuNPs, and PEI-GO, the ECL signal of CQDs is greatly amplified as an excellent conductive material to facilitate electron transfer rate and further increase electrochemical detection capability. Under optimal conditions, the fabricated immunosensor showed a linear concentration range from 0.005 to 500 U mL^-1, with a detection limit of 0.0017 U mL^-1 (signal-to-noise ratio of 3) for CA15-3. The designed ECL immunosensor displayed receivable accuracy, excellent stability, and high specificity. The results of the detection of human serum samples are satisfactory, revealing that the method offers a potential application for the clinical diagnosis of tumor markers.

A graphene oxide-based label-free electrochemical aptasensor for the detection of alpha-fetoprotein

A label-free method for the determination of alpha-fetoprotein (AFP) was successfully developed by graphene oxide (GO)-based electrochemical aptasensor. This aptasensor was constructed by covalently immobilizing NH₂-functionalized AFP-specific aptamer on GO with plenty of carboxylic groups. Cyclic voltammetry (CV) and electrochemical impedance spectra (EIS) analysis were carried out to investigate the practicability of the fabrication procedures. Fourier transform infrared spectra (FTIR), Raman, atomic force microscopy (AFM) and scanning electron microscope (SEM) were performed to indicate the changes of the sensing interface. CV was used to detect the signal change of the aptasensor. Peak current of CVs changed before and after incubating the aptasensor with different concentration of AFP solution. The changes of peak current were proportional to the AFP concentration, with a wide linear range of 0.01-100 ng mL^-1, a low detection limit of 3 pg mL^-1 and good specificity. The proposed simple and cost-effective label-free strategy is promising for the determination of clinical biomarkers such as AFP.

Black phosphorus quantum dots: synthesis, properties, functionalized modification and applications

This review article provides the first systematic summary of zero-dimensional black phosphorus quantum dots, from their synthetic methods, properties, and functionalized modification to their applications.

Controlling electronic properties of MoS2/graphene oxide heterojunctions for enhancing photocatalytic performance: the role of oxygen

The manipulation of the constituents of novel hetero-photocatalysts is an effective method for improving photocatalytic efficiency, but a theoretical understanding of the relationship between interlayer interaction and photocatalytic activity is still lacking.