Artificial metalloenzymes as catalysts in non-natural compounds synthesis

Janus Composite Particles and Interfacial Catalysis Thereby

Janus composite particles (JPs) with distinct compartmentalization of varied components thus performances and anisotropic shape display a variety of properties and have demonstrated great potentials in diversify practical applications. Especially, the catalytic JPs are advantageous for multi-phase catalysis with much easier separation of products and recycling the catalysts. In the first section of this review, typical methods to synthesize the JPs with varied morphologies are briefly surveyed in the category of polymeric, inorganic and polymer/inorganic composite. In the main section, recent progresses of the JPs in emulsion interfacial catalysis are summarized covering organic synthesis, hydrogenation, dye degradation, and environmental chemistry. The review will end by calling more efforts toward precision synthesis of catalytic JPs at large scale to meet the stringent requirements in practical applications such as catalytic diagnosis and therapy by the functional JPs.

Controllable Synthesis of Hemoglobin-Metal Phosphate Organic-Inorganic Hybrid Nanoflowers and Their Applications in Biocatalysis

In recent years, organic-inorganic hybrid nanoflower technology has become an effective method for enzyme immobilization. Here, seven hierarchical flower-like hemoglobin-phosphate organic-inorganic hybrid nanomaterials (Hb-M3(PO4)2·nH2O HNFs) were synthesized through an improved universal one-pot wet-chemical method, with Ca2+, Mn2+, Fe2+, Co2+, Ni2+, Cu2+ and Zn2+ as inorganic components. In this synthesis process, the metal cations are successively involved in the coordination reaction with Hb and the metathesis reaction to generate phosphate precipitation. The coordination ability of metal cations and the generation rate of phosphate precipitations were evaluated, then the progress of the two chemical reactions was controlled synchronously by adjusting the phosphate buffer (PB) concentration, and finally a flower-like structure conducive to substrate diffusion and transport was obtained. Due to the conformational transformation of hemoglobin and the abundant Cu2+/Fe3+ active sites, the hemoglobin-Cu3(PO4)2·3H2O nanoflowers have extremely high catalytic activity, which is ∼14 times that of Hb. Importantly, this method is suitable for the monometallic-ionic, polymetallic-ionic and polyvalent metal-ion nanoflowers, which broadens the chemical composition and structural diversity of nanoflowers.

New Benchmark in DNA-Based Asymmetric Catalysis: Prevalence of Modified DNA/RNA Hybrid Systems

By harnessing the chirality of the DNA double helix, chemists have been able to obtain new, reliable, selective, and environmentally friendly biohybrid catalytic systems with tailor-made functions. Nonetheless, despite all the advances made throughout the years in the field of DNA-based asymmetric catalysis, many challenges still remain to be faced, in particular when it comes to designing a "universal" catalyst with broad reactivity and unprecedented selectivity. Rational design and rounds of selection have allowed us to approach this goal. We report here the development of a DNA/RNA hybrid catalytic system featuring a covalently attached bipyridine ligand, which exhibits unmatched levels of selectivity throughout the current DNA toolbox and opens new avenues in asymmetric catalysis.

Schiff base compounds as artificial metalloenzymes

Much research has been done on traditional homogeneous metal catalysts and enzymatic catalysts, but recently a new class of hybrid catalysts called synthetic (artificial) metalloenzymes has been considered by researchers. Metalloenzymes as hybrid catalysts (host-guest systems) have been shown that combine the properties of a homogeneous and also enzymatic catalyst. The hybrid catalyst will have added value such as enantioselectivity or chemo-selectivity. This review focuses on Schiff base complexes that either act as homogeneous artificial enzymes or contribute to the structure of a host in the preparation of hybrid metalloenzymes. Because this approach can virtually be applied to any bio- or synthetic host or guest coordination complex, the details of hybrid catalysts seem important for advance in catalysis.

Strategies for the application of metal-organic frameworks in catalytic reactions

Efficient catalysts play crucial roles in various organic reactions and polymerization. Metal–organic frameworks (MOFs) have the merits of ultrahigh porosity, large surface area, dispersed polymetallic sites and modifiable linkers, which make them promising candidates for catalyzation. This review primarily summarizes the recent research progress on diverse strategies for tailoring MOFs that are endowed with excellent catalytic behavior. These strategies include utilizing MOFs as nanosized reaction channels, metal nodes decorated as catalytic active sites and the modification of ligands or linkers. All these make them highly attractive to various applications, especially in catalyzing organic reactions or polymerizations and they have proven to be effective catalysts for a wide variety of reactions. MOFs are still an evolving field with tremendous prospects; therefore, through the research and development of more modification and regulation strategies, MOFs will realize their wider practical application in the future.

Metal–organic frameworks (MOFs) are promising candidates for catalyzation. This review primarily summarized the recent research progress in diverse strategies for tailoring MOFs which are endowed with more excellent catalytic behavior.

Exploring the copper binding ability of Mets7 hCtr-1 protein domain and His7 derivative: An insight in Michael addition catalysis

Mets7 is a methionine-rich motif present in hCtr-1 transporter that is involved in copper cellular trafficking. Its ability to bind Cu(I) was recently exploited to develop metallopeptide catalysts for Henry condensation. Here, the catalytic activity of Mets7-Cu(I) complex in Michael addition reactions has been evaluated. Furthermore, His7 peptide, in which Met residues have been substituted with His ones, was also prepared. This substitution allowed His7 to coordinate Cu (II), with the obtainment of a stable turn conformation as evicted by CD experiments. His7-Cu (II) proved also to be a better catalyst than Mets7-Cu(I) in the addition reaction. In particular, when the substrate was the (E)-1-phenyl-3-(pyridin-2-yl)prop-2-en-1-one, a conversion of 71% and a significative 58% of e.e. was observed.

Synthesis and Characterization of a Binuclear Copper(II)-dipyriamethyrin Complex: [Cu2(dipyriamethyrin)(μ2-1,1-acetato)2]

The reaction between dipyriamethyrin and copper(II) acetate [Cu(OAc)₂] afforded what is, to our knowledge, the first transition metal-dipyriamethyrin complex. Molecular and electronic characterization of this binuclear Cu(II) complex via EPR, UV-vis, and single crystal X-ray diffraction analysis revealed marked differences between the present constructs and previously reported binuclear copper(II) hexaphyrin species. UV-vis titration analyses provided evidence for a homotropic positive allosteric effect, wherein the binuclear species is formed without significant intermediacy of a monomeric complex.

Recent advances in metallopolymer-based drug delivery systems

Metallopolymers (MPs) or metal-containing polymers have shown great potential as new drug delivery systems (DDSs) due to their unique properties, including universal architectures, composition, properties and surface chemistry. Over the past few decades, the exponential growth of many new classes of MPs that deal with these issues has been demonstrated. This review presents and assesses the recent advances and challenges associated with using MPs as DDSs. Among the most widely used MPs for these purposes, metal complexes based on synthetic and natural polymers, coordination polymers, metal-organic frameworks, and metallodendrimers are distinguished. Particular attention is paid to the stimulus- and multistimuli-responsive metallopolymer-based DDSs. Of considerable interest is the use of MPs for combination therapy and multimodal systems. Finally, the problems and future prospects of using metallopolymer-based DDSs are outlined. The bibliography includes articles published over the past five years.

Metallopolymers for advanced sustainable applications

Since the development of metallopolymers, there has been tremendous interest in the applications of this type of materials. The interest in these materials stems from their potential use in industry as catalysts, biomedical agents in healthcare, energy storage and production as well as climate change mitigation. The past two decades have clearly shown exponential growth in the development of many new classes of metallopolymers that address these issues. Today, metallopolymers are considered to be at the forefront for discovering new and sustainable heterogeneous catalysts, therapeutics for drug-resistant diseases, energy storage and photovoltaics, molecular barometers and thermometers, as well as carbon dioxide sequesters. The focus of this review is to highlight the advances in design of metallopolymers with specific sustainable applications.

An ionic liquid-functionalized amphiphilic Janus material as a Pickering interfacial catalyst for asymmetric sulfoxidation in water

Novel IL-functionalized amphiphilic Janus chiral salen Ti^IV catalysts behaved as Pickering interfacial catalysts, dramatically accelerating asymmetric sulfoxidation with aq. H₂O₂ in water through the formation of stable Pickering emulsions.

Methodologies for "Wiring" Redox Proteins/Enzymes to Electrode Surfaces

The immobilization of redox proteins or enzymes onto conductive surfaces has application in the analysis of biological processes, the fabrication of biosensors, and in the development of green technologies and biochemical synthetic approaches. This review evaluates the methods through which redox proteins can be attached to electrode surfaces in a "wired" configuration, that is, one that facilitates direct electron transfer. The feasibility of simple electroactive adsorption onto a range of electrode surfaces is illustrated, with a highlight on the recent advances that have been achieved in biotechnological device construction using carbon materials and metal oxides. The covalent crosslinking strategies commonly used for the modification and biofunctionalization of electrode surfaces are also evaluated. Recent innovations in harnessing chemical biology methods for electrically wiring redox biology to surfaces are emphasized.

Chemical and petrochemical industry

The potential sources of various metals in chemical and petrochemical processes are discussed. Special emphasis is put on the catalysts used in the industry. Their main applications, compositions, especially metal contents are presented both for fresh and spent ones. The focus is on the main types of metals used in catalysts: the platinum-group metals, the rare-earth elements, and the variety of transition metals. The analysis suggested that chemical and petrochemical sectors can be considered as the secondary source of metals. Because the utilization of spent refinery catalysts for metal recovery is potentially viable, different methods were applied. The conventional approaches used in metal reclamation as hydrometallurgy and pyrometallurgy, as well as new methods include bioleaching, were described. Some industrial solutions for metal recovery from spent solution were also presented.

Artificial Metalloproteins for Binding and Stabilization of a Semiquinone Radical

The interaction of a number of first-row transition-metal ions with a 2,2′-bipyridyl alanine (bpyA) unit incorporated into the lactococcal multidrug resistance regulator (LmrR) scaffold is reported. The composition of the active site is shown to influence binding affinities. In the case of Fe(II), we demonstrate the need of additional ligating residues, in particular those containing carboxylate groups, in the vicinity of the binding site. Moreover, stabilization of di-tert-butylsemiquinone radical (DTB-SQ) in water was achieved by binding to the designed metalloproteins, which resulted in the radical being shielded from the aqueous environment. This allowed the first characterization of the radical semiquinone in water by resonance Raman spectroscopy.

A coordination study of first-row transition-metal ions to bipyridine alanine (bpyA) incorporated into the lactococcal multidrug resistance regulator (LmrR) scaffold is reported. The designed metalloproteins were shown to bind and stabilize the di-tert-butylsemiquinone radical (DTB-SQ) in water, allowing for the first resonance Raman characterization of this radical species in water.

Ligand libraries for high throughput screening of homogeneous catalysts

This review describes different approaches to construct ligand libraries towards high throughput screening of homogeneous metal catalysts.

Ferritin encapsulation of artificial metalloenzymes: engineering a tertiary coordination sphere for an artificial transfer hydrogenase

Creating a tertiary coordination sphere around a transition metal catalyst incorporated within a protein affects its catalytic turnover and enantioselectivity.