Lanthanoid tetrazole coordination complexes

Coordination variety of phenyltetrazolato and dimethylamido ligands in dimeric Ti, Zr, and Ta complexes

Three structurally diverse 5-phenyltetrazolato (Tz) Ti, Zr, and Ta complexes, namely, (C2H8N)[Ti2(C7H5N4)5(C2H6N)4]·1.45C6H6 or (Me2NH2)[Ti2(NMe2)4(2,3-μ-Tz)3(2-η1-Tz)2]·1.45C6H6, (1·1.45C6H6), [Zr2(C7H5N4)6(C2H6N)2(C2H7N)2]·1.12C6H6·0.382CH2Cl2 or [Zr2(Me2NH)2(NMe2)2(2,3-μ-Tz)3(2-η1-Tz)2(1,2-η2-Tz)]·1.12C6H6·0.38CH2Cl2 (2·1.12C6H6·0.38CH2Cl2), and (C2H8N)2[Ta2(C7H5N4)8(C2H6N)2O]·0.25C7H8 or (Me2NH2)2[Ta2(NMe2)2(2,3-μ-Tz)2(2-η1-Tz)6O]·0.25C7H8 (3·0.25C7H8), where TzH is 5-phenyl-1H-tetrazole, have been synthesized and structurally characterized. All three complexes are dinuclear; the Ti center in 1 is six-coordinate, whereas the Zr and Ta atoms in 2 and 3 are seven-coordinate. The coordination environments of the Ti centers in 1 are similar, and so are the ligations of the Ta centers in 3. In contrast, the two Zr centers in 2 bear a different number of ligands, one of which is a bidentate η2-5-phenyltetrazolato ligand that has not been observed previously for d-block elements. The dimethylamido ligand, present in the starting materials, remained unchanged, or was converted to dimethylamine and dimethylammonium during the synthesis. Dimethylamine coordinates as a neutral ligand, whereas dimethylammonium is retained as a hydrogen-bonded entity bridging Tz ligands.

Catalytic Tetrazole Synthesis via [3+2] Cycloaddition of NaN3 to Organonitriles Promoted by Co(II)-complex: Isolation and Characterization of a Co(II)-diazido Intermediate

The [3+2] cycloaddition of sodium azide to nitriles to give 5-substituted 1H-tetrazoles is efficiently catalyzed by a Cobalt(II) complex (1) with a tetradentate ligand N,N-bis(pyridin-2-ylmethyl)quinolin-8-amine. Detailed mechanistic investigation shows the intermediacy of the cobalt(II) diazido complex (2), which has been isolated and structurally characterized. Complex 2 also shows good catalytic activity for the synthesis of 5-substituted 1H-tetrazoles. These are the first examples of cobalt complexes used for the [3+2] cycloaddition reaction for the synthesis of 1H-tetrazoles under homogeneous conditions.

Fluorescent Nanoassembly of Tetrazole-Based Dyes with Amphoteric Surfactants: Investigation of Cyanide Sensing and Antitubercular Activity

Tetrazole-based easily synthesizable fluorogenic probes have been developed that can form self-assembled nanostructures in the aqueous medium. Though the compounds could achieve detection of cyanide ions in apolar solvents, such as, THF, significant interference was observed from other basic anions, such as F-, AcO-, H2PO4-, etc. On the other hand, a highly specific response was observed for CN- ions in the aqueous medium. However, the sensitivity was so poor that it could hardly be useful for real-life sample analysis. Interestingly, the co-assembly of such probe molecules with hydroxyethyl-anchored amphoteric surfactants could drastically improve the sensitivity toward CN- ions in water without dampening their excellent selectivity. Also, it was observed that the degree of fluorescence response for CN- ions depends on the nature of the polyaromatic scaffolds (naphthyl vs anthracenyl), the nature of the surfactant assembly (micelle vs vesicle), etc. The mechanistic investigation indicates the hydrogen bonding interaction between the tetrazole -NH group and cyanide ions in the aqueous medium, which can effectively change the electronics of the tetrazole unit, resulting in alteration in the extent of charge transfer interaction. Then, the biocompatible composite materials (dye-surfactant assemblies at different ratios) were tested for antituberculosis activity. Fortunately, in a few cases, the compositions were found to be as effective as the commercially available antituberculosis drug, ethambutol.

A Molybdenum(VI) Complex of 5-(2-pyridyl-1-oxide)tetrazole: Synthesis, Structure, and Transformation into a MoO3-Based Hybrid Catalyst for the Epoxidation of Bio-Olefins

The discovery of heterogeneous catalysts synthesized in easy, sustainable ways for the valorization of olefins derived from renewable biomass is attractive from environmental, sustainability, and economic viewpoints. Here, an organic–inorganic hybrid catalyst formulated as [MoO3(Hpto)]·H2O (2), where Hpto = 5-(2-pyridyl-1-oxide)tetrazole, was prepared by a hydrolysis–condensation reaction of the complex [MoO2Cl2(Hpto)]∙THF (1). The characterization of 1 and 2 by FT-IR and Raman spectroscopies, as well as 13C solid-state NMR, suggests that the bidentate N,O-coordination of Hpto in 1 (forming a six-membered chelate ring, confirmed by X-ray crystallography) is maintained in 2, with the ligand coordinated to a molybdenum oxide substructure. Catalytic studies suggested that 2 is a rare case of a molybdenum oxide/organic hybrid that acts as a stable solid catalyst for olefin epoxidation with tert-butyl hydroperoxide. The catalyst was effective for converting biobased olefins, namely fatty acid methyl esters (methyl oleate, methyl linoleate, methyl linolenate, and methyl ricinoleate) and the terpene limonene, leading predominantly to the corresponding epoxide products with yields in the range of 85–100% after 24 h at 70 °C. The versatility of catalyst 2 was shown by its effectiveness for the oxidation of sulfides into sulfoxides and sulfones, at 35 °C (quantitative yield of sulfoxide plus sulfone, at 24 h; sulfone yields in the range of 77–86%). To the best of our knowledge, 2 is the first molybdenum catalyst reported for methyl linolenate epoxidation, and the first of the family [MoO3(L)x] studied for methyl ricinoleate epoxidation.

Tripodal Phosphine Oxide Ligand with Tetrazole Functionality

Abstract

Tris[2-(3′-cyanopropoxy)phenyl]phosphine oxide has been obtained via the alkylation of tris(2hydroxyphenyl)phosphine oxide with 4-bromobutyronitrile in the presence of K2CO3. The product structure has been elucidated by means of X-ray diffraction analysis. The terminal cyano groups in the obtained phosphine oxide have been converted into tetrazole rings via the click-reaction with NH4N3 to give a new hybrid tripodal propeller ligand, tris{2-[3′-(tetrazol-5′′-yl)propoxy]phenyl}phosphine oxide. Palladium(II) complexes of the prepared ligand and its short-linker analog, tris[2-(tetrazol-5′-ylmethoxy)phenyl]phosphine oxide, have been synthesized. Cytotoxicity of the ligands and their Pd(II) complexes has been studied.

Incorporation of a nitrogen-rich energetic ligand in a {Yb} complex exhibiting slow relaxation of the magnetisation under an applied field

Though often used as the precursor in energetic materials research and organic synthesis, 3,6-dihydrazinyl-1,2,4,5-tetrazine (dhtz) has not been previously explored in coordination chemistry. Herein, we present the first crystalline coordination compound with dhtz, [Yb₂(dhtz)(fod)₆] (fod^- = 6,6,7,7,8,8,8-heptafluoro-2,2-dimethyl-3,5-octanedionate). This compound exhibits Single-Molecule Magnet behaviour under an applied magnetic field, and m_J states were resolved through luminescence studies.

An intramolecular relay catalysis strategy for Knoevenagel condensation and 1,3-dipolar cycloaddition domino reactions

A relay catalysis strategy was established by using a bifunctional catalyst which was prepared by immobilization of organic chains containing secondary amine and Cu(ii) complex onto silica-coated nano-Fe₃O₄. The simply prepared nanoparticles acted as efficient, intramolecular relays and magnetically recyclable base-metal bifunctional catalysts for Knoevenagel condensation and 1,3-dipolar cycloaddition domino reactions to prepare 5-substituted 1H-tetrazoles with excellent yields.

A magnetically recoverable bifunctional catalyst was synthesized and effectively used in Knoevenagel condensation and 1,3-dipolar cycloaddition domino reactions.

A Crystallographic Study of a Novel Tetrazolyl-Substituted Nitronyl Nitroxide Radical

Spin-labelled compounds are widely used in chemistry, physics, biology, and material sciences, but the directed synthesis of some functionalized organic radicals is still a challenge. We succeeded in the preparation of a tetrazolyl-substituted nitronyl nitroxide radical in pure crystalline form. According to the single-crystal X-ray data, intra- (NH…O, 2.43 Å) and inter-molecular hydrogen bonds (NH…O, 1.91 Å) are formed between NH groups of the tetrazole cycles and O atoms of the paramagnetic moieties. The intermolecular H-bonds connect the molecules forming chains along the a-axis. Moreover, there are short intermolecular contacts between the O atoms (3.096 Å) and between the O and C atoms (3.096 Å) of the nitronyl nitroxide moieties within the chain. The spin-unrestricted broken-symmetry calculations performed at the BS-UB3LYP/def2-TZVP level of theory predicted a sufficient ferromagnetic interaction (J ≈ 20 cm–1) between the adjacent radicals inside the chain, but a weak antiferromagnetic interaction (−J ≤0.2 cm−1) between the nearest radicals belonging to the different chains. Thus, a rare case when stable radicals, the tetrazolyl-substituted nitronyl nitroxides, are ordered into ferromagnetic chains was revealed; an investigation of the magneto-structural correlations inherent in the nitroxide radical will demand a special experiment in the sub-Kelvin regime.