Metal–metal bonded compounds with uncommon low oxidation state

Valence Tautomerism Induced Proton Coupled Electron Transfer:X-H Bond Oxidation with a Dinuclear Au(II) Hydroxide Complex

We report the preparation and characterization of the dinuclear AuII hydroxide complex AuII 2(L)2(OH)2 (L=N,N'-bis (2,6-dimethyl) phenylformamidinate) and study its reactivity towards weak X-H bonds. Through the interplay of kinetic analysis and computational studies, we demonstrate that the oxidation of cyclohexadiene follows a concerted proton-coupled electron transfer (cPCET) mechanism, a rare type of reactivity for Au complexes. We find that the Au-Au σ-bond undergoes polarization in the PCET event leading to an adjustment of oxidation levels for both Au centers prior to C(sp3)-H bond cleavage. We thus describe the oxidation event as a valence tautomerism-induced PCET where the basicity of one reduced Au-OH unit provides a proton acceptor and the second more oxidized Au center serves as an electron acceptor. The coordination of these events allows for unprecedented radical-type reactivity by a closed shell AuII complex.

Alumanyl-Samarium(II): Synthesis, Characterization, and Reactivity Studies

Metal-metal bonded species involving lanthanides are intriguing but rare. The recently reported salt metathesis reaction of an Al anion and SmI2(thf)2 yields novel heterometallic compound possessing two distinctive Al-Sm bonds. Although the Al-Sm bonds were considerably long [3.518(1) and 3.543(1) Å], DFT calculations indicated polar character of the Alδ--Smδ+ bonds. This is the first example of lanthanide species containing X-type Al ligands. Reactivity studies have demonstrated that the introduction of Sm(II) produces unique reactivity. The reaction with carbodiimide led to an insertion of carbodiimide into the Al-Sm bonds and reductive coupling of carbodiimide to create an oxalamidinate moiety, facilitated by Sm(II). Exposure of the Al-Sm-Al complex toward ethylene furnished a Sm(II) salt of anionic aluminacyclopropane that was spontaneously isomerized to a 1,4-dialuminacyclohexane derivative. The important role of Sm(II) to facilitate the ring expansion through an alkyl-relay mechanism was elucidated by DFT calculations.

N-Alkyl substituted triazenide-bridged homoleptic iron(II) dimers with an exceptionally short Fe-Fe bond

Dinuclear transition metal complexes with direct metal-metal interactions have the potential to generate unique reactivities and properties. Using asymmetric triazine ligands HN3tBuR (R = Et, iPr, nBu) featuring different alkyl substituents at 1,3-N centers, we report here the first rational synthesis of 'tetragonal lantern' type Fe(II) triazenides [Fe2(N3tBuR)4] [R = Et (1), iPr (2), nBu (3)] having an exceptionally short Fe-Fe distance (2.167-2.174 Å). Unlike the previously reported lantern structures with related amidinate or guanidinate ligands, highly air-sensitive 1-3 show a lower spin ground state, as indicated by Mössbauer, 1H NMR and DFT studies.

A Convenient One-Pot Synthesis of a Sterically Demanding Aniline from Aryllithium Using Trimethylsilyl Azide, Conversion to β-Diketimines and Synthesis of a β-Diketiminate Magnesium Hydride Complex

This work reports the one-pot synthesis of sterically demanding aniline derivatives from aryllithium species utilising trimethylsilyl azide to introduce amine functionalities and conversions to new examples of a common N,N'-chelating ligand system. The reaction of TripLi (Trip = 2,4,6-iPr3-C6H2) with trimethylsilyl azide afforded the silyltriazene TripN2N(SiMe3)2 in situ, which readily reacts with methanol under dinitrogen elimination to the aniline TripNH2 in good yield. The reaction pathways and by-products of the system have been studied. The extension of this reaction to a much more sterically demanding terphenyl system suggested that TerLi (Ter = 2,6-Trip2-C6H3) slowly reacted with trimethylsilyl azide to form a silyl(terphenyl)triazenide lithium complex in situ, predominantly underwent nitrogen loss to TerN(SiMe3)Li in parallel, which afforded TerN(SiMe3)H after workup, and can be deprotected under acidic conditions to form the aniline TerNH2. TripNH2 was furthermore converted to the sterically demanding β-diketimines RTripnacnacH (=HC{RCN(Trip)}2H), with R = Me, Et and iPr, in one-pot procedures from the corresponding 1,3-diketones. The bulkiest proligand was employed to synthesise the magnesium hydride complex [{(iPrTripnacnac)MgH}2], which shows a distorted dimeric structure caused by the substituents of the sterically demanding ligand moieties.

Synthesis and reactivity of heteroleptic zinc(I) complexes toward heteroallenes

Heteroleptic zinc(I) complexes L^1,2Zn-ZnCp* (L¹ = HC[C(CF₃)NC₆F₅]₂1; L² = HC[C(Me)NDipp]₂; Dipp = 2,6-i-Pr₂C₆H₃2) are synthesized by reactions of Cp*₂Zn₂ with L¹H and L²ZnH. 2 reacts with t-BuNCO to give unprecedented carbamate complex (4), while reactions with RN₃ gave bis-hexazene, triazenide, and trimeric azide complexes (5-7).

Main-group metal complexes of α-diimine ligands: structure, bonding and reactivity

α-Diimine ligands, in particular 1,4-diazabutadiene (dad) and bis(iminoacenaphthene) (bian) derivatives, have been widely used for coordination with various metals, including main-group, transition, and lanthanide and actinide metals. In addition to their tunable steric and electronic properties, the dad and bian ligands are redox-active and can readily accept one or two electrons, converting into the radical-anionic (L˙^-) or dianionic (enediamido, L^2-) form, respectively. This non-innocence brings about rich electronic structures and properties of the ligands and complexes thereof. For example, the dad ligands in their three redox levels can effectively stabilize a series of metal centers in different oxidation states, including low-valent metals. Moreover, these ligands can serve as electron reservoirs and can participate in reactions toward other molecules with or without metals. Therefore, such ligands are extremely useful in the areas of low-valent complexes and small molecule activation. Herein, we will discuss the use of dad (and bian) ligands in the stabilization of metal-metal-bonded compounds, in particular those of main-group metals, as well as small molecule activation by these (low-valent) metal coordination species where the non-innocence of the ligands plays a key role.

Taming the Antiferromagnetic Beast: Computational Design of Ultrashort Mn-Mn Bonds Stabilized by N-Heterocyclic Carbenes

The development of complexes featuring low-valent, multiply bonded metal centers is an exciting field with several potential applications. In this work, we describe the design principles and extensive computational investigation of new organometallic platforms featuring the elusive manganese-manganese bond stabilized by experimentally realized N-heterocyclic carbenes (NHCs). By using DFT computations benchmarked against multireference calculations, as well as MO- and VB-based bonding analyses, we could disentangle the various electronic and structural effects contributing to the thermodynamic and kinetic stability, as well as the experimental feasibility, of the systems. In particular, we explored the nature of the metal-carbene interaction and the role of the ancillary η6 coordination to the generation of Mn2 systems featuring ultrashort metal-metal bonds, closed-shell singlet multiplicities, and positive adiabatic singlet-triplet gaps. Our analysis identifies two distinct classes of viable synthetic targets, whose electrostructural properties are thoroughly investigated.

An uncommon multicentered ZnI-ZnI bond-based MOF for CO2 fixation with aziridines/epoxides

A novel cluster-based MOF with uncommon multicentered Zn^I-Zn^I bonds {[K_1.2Na_2.8Zn^I₈(HL)₁₂]·4H₂O}_n (HL = tetrazole monoanion) (1) was synthesized, which showed higher stability than the reported Zn^I-Zn^I bonded compounds. Moreover, 1 can effectively and circularly catalyze the cyclization of CO₂ and aziridines or epoxides with five substituent groups. Importantly, this is the first time that the catalytic properties of MOFs with multicentered metal-metal bonded clusters as the catalyst have been studied.

Transition Metal Chain Complexes Supported by Soft Donor Assembling Ligands

The chemistry of discrete molecular chains constituted by metals in low oxidation states, displaying metal-metal proximity and stabilized by suitable metal-bridging, assembling ligands comprising at least one soft donor atom is comprehensively reviewed; complexes with a single (hard or soft) bridging atom (e.g., μ-halide, μ-sulfide, or μ-PR₂ etc.) as well as "closed" metal arrays (that fall in the realm of cluster chemistry) are excluded. The focus is on transition metal-based systems, with few excursions to cases combining transition and post-transition elements. Most relevant supporting ligands have neutral C, P, O, or S donor (mainly, N-heterocyclic carbene, phosphine, ether, thioether) or anionic donor (mainly phenyl, ylide, silyl, phosphide, thiolate) groups. A supporting-ligand-based classification of the metal chains is introduced, using as the classifying parameter the number of "bites" (i.e., ligand bridges) subtending each intermetallic separation. The ligands are further grouped according to the number of donor atoms interacting with the metal chain (called denticity in the following) and the column of the Periodic Table to which the set of donor atoms belongs (in ascending order). A complementary metal-based compilation of the complexes discussed is also provided in a concise tabular form.

Stabilizing a three-center single-electron metal-metal bond in a fullerene cage

Trimetallic carbide clusterfullerenes (TCCFs) encapsulating a quinary M3C2 cluster represent a special family of endohedral fullerenes with an open-shell electronic configuration. Herein, a novel TCCF based on a medium-sized rare earth metal, dysprosium (Dy), is synthesized for the first time. The molecular structure of Dy3C2@I h(7)-C80 determined by single crystal X-ray diffraction shows that the encapsulated Dy3C2 cluster adopts a bat ray configuration, in which the acetylide unit C2 is elevated above the Dy3 plane by ∼1.66 Å, while Dy-Dy distances are ∼3.4 Å. DFT computational analysis of the electronic structure reveals that the endohedral cluster has an unusual formal charge distribution of (Dy3)8+(C2)2-@C80 6- and features an unprecedented three-center single-electron Dy-Dy-Dy bond, which has never been reported for lanthanide compounds. Moreover, this electronic structure is different from that of the analogous Sc3C2@I h(7)-C80 with a (Sc3)9+(C2)3-@C80 6- charge distribution and no metal-metal bonding.

Chromous carbonates containing a square-grid layer of {Cr2(CO3)4}n4n- based on a dichromium(II,II) paddlewheel core

Polymeric coordination compounds based on Cr2n+ paddle-wheel building blocks with non-carboxylate O,O-donor ligands chelating and bridging the Cr-Cr centers have been underexplored hitherto. This paper reports the synthesis and crystal structure of a new homo-valent chromium(ii,ii) compound, Na3HCr2(CO3)4·10H2O (1). It has a two-dimensional structure in which the paddlewheel chromium(ii,ii) units of Cr2(CO3)44- are cross-linked through the carbonate groups. The layers are stacked along the [100] direction, and Na ions fill the intra and interlayer spaces with a neighboring layer distance of about 11.3 Å. The investigation of the primary magnetic properties and theoretical studies with density functional theory (DFT) reveal the partial paramagnetic properties of compound 1 arising from the Boltzmann distribution between a ground state σ2π4δ2 with S = 0 and a low-lying excited state σ2π4δδ* with S = 1 for the Cr2(ii,ii) dimer. According to Raman spectra measurements combined with theoretical calculations, the two Raman bands in the small-wavenumber region at 335 and 297 cm-1 were assigned to the vibration of the Cr-O bonds and the band at 371 cm-1 was assigned to the stretching of the Cr-Cr quadruple bond.

Cooperative Bond Activation by a Bimetallic Main-Group Complex

Inspired by natural metalloenzymes that efficiently catalyze a variety of transformations, chemists have developed large numbers of dinuclear transition-metal complexes with extraordinary properties and reactivity patterns. For main-group element compounds, however, metal-metal cooperativity is much less explored. Here we present the synthesis and characterization of a room-temperature-stable compound with two separated two-coordinated gallium(I) centers possessing both a lone pair of electrons and a vacant orbital, reminiscent of singlet carbenes. This species displays enhanced reactivity compared to its mononuclear counterpart due to bimetallic cooperativity that allows for the facile activation of strong C-F bonds across the gallium-gallium bond. Two mechanistic scenarios of the cooperative bond activation have been identified by DFT and DLPNO-CCSD(T) calculations.

Coordination Chemistry of Bulky Aminopryridinates with Main Group and Transition Metals

The coordination chemistry of bidentate aminopyridinato ligands (ApH), in particular 2-aminopyridines, is a highly popular area of research. Due to easy accessibility and versatility, 2-aminopyridines have played a prominent role as alternatives to cyclopentadienyl ligands in coordination chemistry. Easily modifiable steric bulks and the ability for fine-tuning of electronic effects have allowed researchers to control not only the metal-to-ligand stoichiometry but also the properties of their metal complexes. Previously, ligand redistribution was frequently observed for ligands of small steric demands. Bulky aminopyridinato ligands refer to ligands that incorporate alkyl-substituted phenyl groups at the amine/amido nitrogen and at the sixth position of the pyridine ring. The steric crowding allowed the stabilization of transition metals in unusually low oxidation conditions. One of the remarkable developments, for example, is the stabilization of metal-metal quintuple bonds by these ligands, thus providing a diamagnetic platform to study such systems chemically. Application of metal aminopyridinates in homogeneous catalysis has also broadened considerably in recent years. This review provides a comprehensive account of advances made with such ligands since their development for main group and transition elements.

A Mechanistic Study on Reactions of Group 13 Diyls LM with Cp*SbX2 : From Stibanyl Radicals to Antimony Hydrides

Oxidative addition of Cp*SbX₂ (X=Cl, Br, I; Cp*=C₅Me₅) to group 13 diyls LM (M=Al, Ga, In; L=HC[C(Me)N (Dip)]₂, Dip=2,6‐iPr₂C₆H₃) yields elemental antimony (M=Al) or the corresponding stibanylgallanes [L(X)Ga]Sb(X)Cp* (X=Br 1, I 2) and ‐indanes [L(X)In]Sb(X)Cp* (X=Cl 5, Br 6, I 7). 1 and 2 react with a second equivalent of LGa to eliminate decamethyl‐1,1’‐dihydrofulvalene (Cp*₂) and form stibanyl radicals [L(X)Ga]₂Sb^. (X=Br 3, I 4), whereas analogous reactions of 5 and 6 with LIn selectively yield stibanes [L(X)In]₂SbH (X=Cl 8, Br 9) by elimination of 1,2,3,4‐tetramethylfulvene. The reactions are proposed to proceed via formation of [L(X)M]₂SbCp* as reaction intermediate, which is supported by the isolation of [L(Cl)Ga]₂SbCp (11, Cp=C₅H₅). The reaction mechanism was further studied by computational calculations using two different models. The energy values for the Ga‐ and the In‐substituted model systems showing methyl groups instead of the very bulky Dip units are very similar, and in both cases the same products are expected. Homolytic Sb−C bond cleavage yields van der Waals complexes from the as‐formed radicals ([L(Cl)M]₂Sb^. and Cp*^.), which can be stabilized by hydrogen atom abstraction to give the corresponding hydrides, whereas the direct formation of Sb hydrides starting from [L(Cl)M]₂SbCp* via concerted β‐H elimination is unlikely. The consideration of the bulky Dip units reveals that the amount of the steric overload in the intermediate I determines the product formation (radical vs. hydride).

Intermediate snapshot on the insertion reaction of isocyanates into the Zn-Cp* bond of dizincocene Cp*2Zn2

Heteroleptic Zn(i) complexes Cp*Zn-Zn(N(R)C(Cp*)O) (R = Dipp = 2,6-i-Pr2-C6H32, t-Bu 3) with unsymmetrically η4-coordinated Cp* substituents represent snapshots of the insertion reaction of RNCO into the Zn-Cp* bond of Cp*2Zn21. The bonding situation in 2 and 3, which represent the first Zn(i) olefin complexes, was evaluated by computational calculation and further compared to other Zn(i) complexes.

BeBe triple bond in Be2X4Y2 clusters (X = Li, Na and Y = Li, Na, K) and a perfect classical BeBe triple bond presented in Be2Na4K2

The trans-bent Be₂X₄Y₂ structures are explained through ESP of Be₂X₄ and a perfect BeBe triple bond is confirmed in D_4h-Be₂Na₄K₂.

Diverse modes of functionalisation of ruthenium coordinated β-ketoiminate analogues

Varying chelation assisted as well as solvent dependent reactivity profiles of isostructural β-ketoiminate analogues explicate their non-spectator behaviour and fractional redox non-innocence.