N-heterocyclic carbene supported halosilylenes: New frontiers in an emerging field

Polydentate Amidinato-Silylenes, -Germylenes and -Stannylenes

This review article focuses on amidinatotetrylenes that potentially can (or have already shown to) behave as bi- or tridentate ligands because they contain at least one amidinatotetrylene moiety (silylene, germylene or stannylene) and one (or more) additional coordinable fragment(s). Currently, they are being widely used as ligands in coordination chemistry, small molecule activation and catalysis. This review classifies those that have been isolated as transition metal-free compounds into five families that differ in the position(s) of the donor group(s) (D) on the amidinatotetrylene moiety, namely: ED{R1NC(R2)NR1}, EX{DNC(R2)NR1}, EX{R1NC(D)NR1}, EX{DNC(R2)ND} and E{R1NC(R2)ND}2 (E=Si, Ge or Sn). Those that do not exist as transition metal-free compounds but have been observed as ligands in transition metal complexes are cyclometallated and ring-opened amidinatotetrylene ligands. This article presents schematic descriptions of their structures, the approaches used for their syntheses and a quick overview of their involvement (as ligands) in transition metal-catalysed reactions. The literature is covered up to the end of 2023.

Unusual nucleophilic reactivity of a dithiolene-based N-heterocyclic silane

While the dithiolene-based N-heterocyclic silane (4) reacts with two equivalents of BX3 (X = Br, I) to give zwitterionic Lewis adducts 5 and 8, respectively, the parallel reaction of 4 with BCl3 results in 10, a dithiolene-substituted N-heterocyclic silane, via the Si-S bond cleavage. Unlike 5, the labile 8 may be readily converted to 9via BI3-mediated cleavage of the Si-N bond. The formation of 5 and 8 confirms that 4 uniquely possesses dual nucleophilic sites: (a) the terminal sulphur atom of the dithiolene moiety; and (b) the backbone carbon of the N-heterocyclic silane unit.

Fast and scalable solvent-free access to Lappert's heavier tetrylenes E{N(SiMe3)2}2 (E = Ge, Sn, Pb) and ECl{N(SiMe3)2} (E = Ge, Sn)

Iconic Lappert's heavier tetrylenes E{N(SiMe3)2}2 (E = Ge (1), Sn (2), Pb (3)) have been efficiently prepared from GeCl2·(1,4-dioxane), SnCl2 or PbCl2 and Li{N(SiMe3)2} via a completely solvent-free one-pot mechanochemical route followed by sublimation. This fast, high-yielding and scalable approach (2 has been prepared in a 100 mmol scale), which involves a small environmental footprint, represents a remarkable improvement over any synthetic route reported over the last five decades, being a so far rare example of the use of mechanochemistry in the realm of main group chemistry. This solventless route has been successfully extended to the preparation of other heavier tetrylenes, such as ECl{N(SiMe3)2} (E = Ge (4), Sn (5)).

Nickelacarborane-Supported Bis-N-heterocyclic Carbenes

Metallacarboranes have attracted significant attention due to their unique properties. Considerable efforts have been made on the reactions around the metal centers or the metal ion itself, while transformations of functional groups of the metallacarboranes have been much less explored. We presented here the formation of imidazolium-functionalized nickelacarboranes (2), their subsequent conversion to nickelacarborane-supported N-heterocyclic carbenoids (NHCs, 3), and the reactivities of 3 toward Au(PPh₃)Cl and Se powder, which resulted in the formation of bis-gold carbene complexes (4) and NHC selenium adducts (5). Cyclic voltammetry of 4 shows two reversible peaks, corresponding to the interconversion transformations Ni^II ↔ Ni^III and Ni^III ↔ Ni^IV. Theoretical calculations demonstrated relatively high-lying lone-pair orbitals, weak B-H···H-C interactions between the BH units and the methyl group, and weak B-H···π interactions between the BH groups and the vacant p-orbital of the carbene.

Antimony(III) Halide-Assisted Stereospecific Coordination of Thione

The antimony halide-aided stereospecific coordination of a cyclic thiourea-type of ligand is observed for the first time. The antimony(III) imidazole thione complexes syn-[(L¹ )SbCl₃ ] (syn-1) and anti-[(L¹ )SbBr₃ ] (anti-2) have been synthesized in very good yield by the reaction between the spatially defined steric impact ligand [(IPaul)S] (L¹ ) ([(IPaul)S]=1,3-bis(2,4-methyl-6-diphenyl phenyl)imidazole thione) and corresponding antimony halide. The stereoselective formation of complexes syn-1 and anti-2 has been confirmed by both NMR and single-crystal X-ray diffraction studies. Interestingly the stereospecific nature of syn-1 and anti-2 remains intact in solution. Furthermore, the thermal stability of antimony(III) imidazole thione complexes were examined by TGA analysis.

Silylium Ions: From Elusive Reactive Intermediates to Potent Catalysts

The history of silyl cations has all the makings of a drama but with a happy ending. Being considered reactive intermediates impossible to isolate in the condensed phase for decades, their actual characterization in solution and later in solid state did only fuel the discussion about their existence and initially created a lot of controversy. This perception has completely changed today, and silyl cations and their donor-stabilized congeners are now widely accepted compounds with promising use in synthetic chemistry. This review provides a comprehensive summary of the fundamental facts and principles of the chemistry of silyl cations, including reliable ways of their preparation as well as their physical and chemical properties. The striking features of silyl cations are their enormous electrophilicity and as such reactivity as super Lewis acids as well as fluorophilicity. Known applications rely on silyl cations as reactants, stoichiometric reagents, and promoters where the reaction success is based on their steady regeneration over the course of the reaction. Silyl cations can even be discrete catalysts, thereby opening the next chapter of their way into the toolbox of synthetic methodology.

Main Group Multiple Bonds for Bond Activations and Catalysis

Since the discovery that the so-called "double-bond" rule could be broken, the field of molecular main group multiple bonds has expanded rapidly. With the majority of homodiatomic double and triple bonds realised within the p-block, along with many heterodiatomic combinations, this Minireview examines the reactivity of these compounds with a particular emphasis on small molecule activation. Furthermore, whilst their ability to act as transition metal mimics has been explored, their catalytic behaviour is somewhat limited. This Minireview aims to highlight the potential of these complexes towards catalytic application and their role as synthons in further functionalisations making them a versatile tool for the modern synthetic chemist.

Rare antimony(III) imidazole selone complexes: steric controlled structural and bonding aspects

Novel antimony(iii) imidazole selone complexes in a super crowded environment are reported for the first time. The super bulky selone antimony complexes, [{IPr*Se}(SbCl3)2] (1) and [{IPr*Se}(SbBr3)2] (2), were isolated from the reactions between IPr*Se (IPr*Se = [1,3-bis(2,6-diphenylmethylphenyl)imidazole selone]) and suitable antimony(iii) halides. 1 and 2 are dinuclear complexes with a Sb : Se ratio of 1 : 0.5 with an unusual coordination mode of selone. The molecules 1 and 2 consist of both Menshutkin-type Sbπaryl interactions and a Sb-Se coordination bond. However, the reaction between antimony(iii) halides and [(IPaul)Se] ([(IPaul)Se] = [1,3-bis(2,4-methyl-6-diphenyl phenyl)imidazole selone]) with a spatially defined steric impact gave the dinuclear complex [{(IPaul)Se}(SbCl3)]2 (3) and the mononuclear complex [{(IPaul)Se}(SbBr3)] (4) without Menshutkin-type interactions. The Sb : Se ratio in 3 and 4 is 1 : 1. Interestingly, the Menshutkin-type interaction was absent in 3 and 4 due to the efficient coordinating ability of the ligand [(IPaul)Se] with the Sb(iii) center compared to that of the super bulky ligand IPr*Se. The thermal property of these antimony selone complexes was also investigated. Density functional theory (DFT) calculations were carried out on the model systems [L(SbCl3)2] (1A), [L(SbCl3)] (1B), [L'(SbCl3)2] (1C), and [L'(SbCl3)] (1D), where L = [1,3-bis(2,6-diisopropyl-4-methyl phenyl)imidazole selone] and L' = [1,3-bis(phenyl)imidazole selone], to understand the nature of orbitals and bonding situations. The computed metrical parameters of 1A are in good agreement with the experimental values. Natural population analysis of the model system reveals that the natural charge and total population of antimony(iii) are comparable. The unequal interaction between selenium and antimony obtained using Wiberg bond indices (WBIs) is fully consistent with the findings of the single-crystal X-ray studies.

On the Potential of Silicon as a Building Block for Life

Despite more than one hundred years of work on organosilicon chemistry, the basis for the plausibility of silicon-based life has never been systematically addressed nor objectively reviewed. We provide a comprehensive assessment of the possibility of silicon-based biochemistry, based on a review of what is known and what has been modeled, even including speculative work. We assess whether or not silicon chemistry meets the requirements for chemical diversity and reactivity as compared to carbon. To expand the possibility of plausible silicon biochemistry, we explore silicon's chemical complexity in diverse solvents found in planetary environments, including water, cryosolvents, and sulfuric acid. In no environment is a life based primarily around silicon chemistry a plausible option. We find that in a water-rich environment silicon's chemical capacity is highly limited due to ubiquitous silica formation; silicon can likely only be used as a rare and specialized heteroatom. Cryosolvents (e.g., liquid N2) provide extremely low solubility of all molecules, including organosilicons. Sulfuric acid, surprisingly, appears to be able to support a much larger diversity of organosilicon chemistry than water.