Metal complexes of corrole

Photophysics of Hydrophobic Corroles in the Aqueous Micellar Media and in the Presence of Graphene Oxide and Bioanalytes

Here two A2B type corrole has been synthesized and solubilized in water via pluronic micellar system by avoiding the utmost mandatory multistep non-environment friendly strategies for bringing hydrophobic non-ionic corroles in aqueous medium. Both the corroles were extremely insoluble in water as no absorption spectra of corrole was available in water. However, corrole 2 in the aqueous solution of F127 exhibit characteristic Soret and Q bands due to efficient solubilization of corrole in F127, the micelles formed by block copolymer act as a "cargo hold" for the corrole molecules. Intense emission spectra were observed for both the corroles in the aqueous solution of F127. We further observed that fluorescence properties of corrole-F127 micelle systems are quenched in presence of graphene oxide (GO) without change in the wavelength or shape of the emission band. The possibility of a dynamic quenching is probed more quantitatively by recording the emission decay profiles of corrole-F127-GO system. This quenching of fluorescence intensity of graphene oxide dispersed corrole-F127 micellar system was partially re-established in the presence of bioanalytes such as dopamine, ascorbic acid. Therefore, the present work has a future potential application for analyzing the interaction with different bioanalytes in biological systems using corrole-GO composite.

Differentiation through E-nose and GC-FID data modeling of rosé sparkling wines elaborated via traditional and Charmat methods

BACKGROUND

The growing demand for rosé sparkling wine has led to an increase in its production. Traditional or Charmat wine-making influence the aromatic profiles in wine. An analysis such as gas chromatography makes an accurate assessment of wines based on volatile detection but is resource intensive. On the other hand, the electronic nose (E-nose) has emerged as a versatile tool, offering rapid, cost-effective discrimination of wines, and contributing insights into quality and production processes because of its aptitude to perform a global aromatic pattern evaluation. In the present study, rosé sparkling wines were produced using both methods and major volatile compounds and polyols were measured. Wines were tested by E-nose and predictive modelling was performed to distinguish them.

RESULTS

Volatile profiles showed differences between Charmat and traditional methods, especially at 5 months of aging. A partial least square discriminant analysis (PLS-DA) was carried out on E-nose detections, obtaining a model that describes 94% of the variability, separating samples in different clusters and correctly identifying different classes. The differences derived from PLS-DA clustering agree with the results obtained by gas-chromatography. Moreover, a principal components regression model was built to verify the ability of the E-nose to non-destructively predict the amount of different volatiles analyzed.

CONCLUSION

Production methods of Rosé sparkling wine affect the final wine aroma profiles as a result of the differences in terms of volatiles. The PLS-DA of the data obtained with E-nose reveals that distinguishing between Charmat and traditional methods is possible. Moreover, predictive models using gas chromatography-flame ionization detection analysis and E-nose highlight the possibility of fast and efficient prediction of volatiles from the E-nose. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Rhenium-Sulfido and -Dithiolato Corroles: Reflections on Chalcophilicity

The high-temperature (∼180 °C) reaction between free-base meso-triarylcorroles and Re2(CO)10, followed by exposure to PCl3 and thiols (or elemental sulfur), affords rhenium-sulfido (ReS) corroles in 67-76% yields. The use of shorter reaction times, lower temperatures (∼130 °C), and a dithiol (e.g., ethane-1,2-dithiol) also allows the isolation of rhenium-dithiolato corroles, presumptive intermediates on the path to ReS corroles. The ReS corroles exhibit high thermal stability and two reversible oxidations and reductions in their cyclic voltammograms, with redox potentials nearly identical to those observed for analogous ReO corroles. The electrochemical HOMO-LUMO gaps of the complexes, at 2.2 eV, are consistent with ligand-centered oxidation and reduction. The UV-vis spectra of ReS corroles, on the other hand, differ significantly from those of their ReO counterparts. Scalar-relativistic DFT calculations suggest that this difference reflects low-energy LUMO+2 and LUMO+3 levels, consisting of Re-S π-antibonding interactions; the ReO corroles, in contrast, exhibit a larger LUMO+1/LUMO+2 gap, as expected for a relatively classical Gouterman-type metalloporphyrin analogue. The high stability of ReS corroles is consistent with geochemists' view of rhenium as a moderately chalcophilic element (i.e., one that partitions into sulfide melts) as well as with a recent quantitative analysis of thiophilicity, which indicates that rhenium's oxophilicity and thiophilicity are essentially evenly balanced.

Effect of meso-pentafluorophenyl group on two-photon absorption in heterocorroles and heterocorrins

Owing to their high reactivity, the meso-positions of corroles and corrins are usually protected by some bulky groups. These groups in addition to the said purpose may also affect the photophysical properties of such systems. However, there is no systematic study in the literature exploring this effect. In this work, we target to answer how the meso-substitution affects the photophysical properties in some heterocorroles and heterocorrins. We considered one of the commonly used substitutions, i.e., pentafluorophenyl (-PFPh), at meso positions of 26 heterocorroles and heterocorrins. We employed the state-of-the-art CC2 method in conjunction with resolution-of-identity approximation to study the charge-transfer and one- and two-photon absorption in these systems. It is further explored using a four-state model that helps in understanding the contribution of various transition dipole moments and their relative orientation. At the end, we also investigated the effect of other substitutions such as -CH3, -CF3, -C2H3, -OMe, -phenyl, and -tolyl on two-photon activity.

CoCorrole-Functionalized PCN-222 for Carbon Monoxide Selective Adsorption

The high risk of CO poisoning justifies the need for indoor air quality control and warning systems based on the detection of low concentrations (ppm-ppb) of CO. Cobalt corrole complexes selectively bind CO vs. O2, CO2, N2, opening new fields of applications. By combining the CO chemisorption properties of cobalt corroles with the known sorption capacity of MOFs, we hope to obtain high performance sensing materials for CO detection. In addition, the exposed metal sites of MOFs lead to CO2 physisorption, allowing the co-detection of CO and CO2. In this work, PCN-222, a stable Zr-based MOF made from Ni(TCPP) with natural vacancies, has been used as a porous matrix for the grafting of electron-poor metallocorroles. The materials were characterized by powder XRD, SEM and optical microscopy, BET analyses and gas adsorption measurements at 298 K. No degradation of the crystalline structure of PCN-222 was observed. At 1 atm, the adsorbed CO(g) volumes measured for the best materials were 12.15 cm3 g-1 and 14.01 cm3 g-1 for CoCorr2@PCN-222 and CoCorr3@PCN-222 respectively, and both materials exhibited high CO chemisorption and selectivity against O2, N2, and CO2 at low pressure due to the highest energy of the chemisorption process vs physisorption.

Structural modification of nickel tetra(thiocyano)corroles during electrochemical water oxidation

In this study, we present two fully characterized nickel tetrathiocyanocorroles, representing a novel class of 3d-metallocorroles. These nickel(II) ions form square planar complexes, exhibiting a d8-electronic configuration. These anionic complexes are stabilized by the electron-withdrawing SCN groups on the bipyrrole unit of the corrole. The reduced aromaticity in these anionic nickel(II) corrole complexes is evidenced by single crystal X-ray diffraction (XRD) data and a markedly altered absorption profile, with stronger Q bands compared to Soret bands. Notably, the UV-Vis and electrochemical data exhibit significant differences from previously reported nickel(II) corrole radical cation and nickel(II) porphyrin complexes. While these electrochemical data bear a resemblance to those of the anionic nickel(II) corrole by Gross et al., the UV-Vis data show substantial distinctions. Additionally, we explore the utilization of nickel(II)-corrole@CC (where CC denotes carbon cloth) as an electrocatalyst for the oxygen evolution reaction (OER) in an alkaline medium. During electrochemical water oxidation, the molecular catalyst is partially converted to nickel (oxy)hydroxide, Ni(O)OH. The structure reveals the coexistence of the molecular complex and Ni(O)OH in the active catalyst, achieving a turnover frequency (TOF) of 3.32 × 10-2 s-1. The synergy between the homogeneous and heterogeneous phases improves the OER activity, providing more active sites and edge sites and enhancing interfacial charge transfer.

Direct Conjugation of Gallium-(III)-Corroles to Short Interfering RNA(siRNA) Providing Real-Time siRNA Imaging and Gene Silencing

Discovering new modifications for oligonucleotide therapeutics is essential for expanding its application to new targets and diseases. In this project, we focus on conjugating metaled ligands to short interfering RNAs (siRNAs) to investigate robust and simple conjugation methods for adding new properties such as real-time imaging to the siRNA. Here we report the chemical synthesis of novel Ga-(III)-corroles for their direct conjugation to siRNAs. Ga-(III)-corrole-siRNAs showed promising results when evaluated for gene silencing and live cell imaging. The knockdown activity of the firefly luciferase reporter gene was measured to evaluate gene silencing activity. Gene silencing studies from two 5'-Ga-(III)-labeled-siRNAs exhibited dose-dependent knockdown with IC50s of 812.7 and 451.4 pM, which is comparable to wild-type (IC50=439.7 pM) in the absence of red light, and IC50s of 562.9 and 354.5 pM, which is also comparable to wild-type (IC50=337.4 pM), in the presence of red light. In addition, imaging studies with Ga-(III)-corrole-modified siRNAs showed intense fluorescence in HeLa cells, highlighting that the Ga-(III)-corrole modification is an effective fluorophore for siRNA tracing and imaging. Moreover, the photodynamic activity of free base corrole vs the Ga-(III)-corrole was evaluated. Results show an increase of light cytotoxicity of the corrole ligand upon the addition of Ga-(III); however, no phototoxicity was observed when Ga-(III) ligands were linked to siRNA. In conclusion, Ga-(III)-corrole-siRNAs show promising results for applications in simultaneous real-time imaging and gene silencing.

The photophysical, photobiological, and DNA/HSA-binding properties of corroles containing carbazole and phenothiazine moieties

This study characterized four corrole derivatives, namely Cbz-Cor, MetCbz-Cor, PTz-Cor, and PTzEt-Cor, examining their photophysical, electrochemical, photobiological, and biomolecule-binding properties. Experimental photophysical data of absorption and emission elements correlated with a theoretical analysis obtained through time-dependent density functional theory (TD-DFT). As for the photophysical properties, we observed lower fluorescence quantum yields and discernible differences between the excited and ground states, as indicated by Stokes shift values. Natural Transition Orbit (NTO) plots presented high occupied molecular orbital - low unoccupied molecular orbital (HOMO-LUMO) densities around the tetrapyrrolic macrocycle in all examples. Our findings demonstrate that corroles maintain stability in solution and offer photostability (<20 %), predominantly in DMSO(5 %)/Tris-HCl (pH 7.4) buffer solution. Furthermore, the singlet oxygen (1O2) quantum yield and log POW values underscore their potential application in photoinactivation approaches, as these corroles serve as effective ROS generators with more lipophilic features. We also evaluated their biomolecular binding capacity towards salmon sperm DNA and human serum albumin using spectroscopic techniques and molecular docking analysis for sustenance. Concerning biomolecule interaction profiles, the corrole derivatives showed a propensity for interacting in the minor grooves of the double helix DNA due to secondary forces, which were more pronounced in site III of the human serum protein.

Surprising Route to a Monoazaporphyrin and Full Characterization of Its Complexes with Five Different 3d Metals

In the search for mild agents for the oxidative cyclization of tetrapyrromethane to the corresponding corrole, we discovered a route that leads to a monoazaporphyrin with three meso-CF3 groups. Optimization studies that allowed access to appreciable amounts of this new macrocycle paved the way for the preparation of its cobalt, copper, nickel, zinc, and iron complexes. All complexes were fully characterized by various spectroscopic methods and X-ray crystallography. Their photophysical and electrochemical properties were determined and compared to those of analogous porphyrins in order to deduce the effect of the peripheral N atom. Considering the global efforts for designing efficient alternatives to platinum group metal (PGM) catalysts, they were also absorbed onto a porous carbon electrode material and studied as electrocatalysts for the oxygen reduction reaction (ORR). The cobalt complex was found to be operative at a quite positive catalytic onset potential and with good selectivity for the desirable 4-electrons/4-protons pathway.

Correlation consistent basis sets designed for density functional theory: Third-row atoms (Ga-Br)

The correlation consistent basis sets (cc-pVnZ with n = D, T, Q, 5) for the Ga-Br elements have been redesigned, tuning the sets for use for density functional approximations. Steps to redesign these basis sets for an improved correlation energy recovery and efficiency include truncation of higher angular momentum functions, recontraction of basis set coefficients, and reoptimization of basis set exponents. These redesigned basis sets are compared with conventional cc-pVnZ basis sets and other basis sets, which are, in principle, designed to achieve systematic improvement with respect to increasing basis set size. The convergence of atomic energies, bond lengths, bond dissociation energies, and enthalpies of formation to the Kohn-Sham limit is improved relative to other basis sets where convergence to the Kohn-Sham limit is typically not observed.

Palladium Complexes of N-Methylcorroles

Alkylation of one of the inner-core nitrogen atoms is one possible approach to obtain dianionic corrole ligands, suitable for the coordination of divalent metal ions, such as PdII . Inner-core N-methylation can be obtained by treating the corrole with CH3 I, but the reaction conditions should be optimized to limit the formation of the dimethylated derivative. Two regioisomers, the N-21 and the N-22 methyl derivatives are obtained from the reaction, with the first product achieved in a higher amount. Structural characterization of the reaction products evidenced the distortion induced by the introduction of the methyl groups; the N-methylcorroles are chiral compounds, and the enantiomers were separated by chromatography, with their absolute configuration assigned by ECD computation. Palladium insertion was achieved in the case of monosubstituted corroles, but not with the dimethylated macrocycle; X-ray characterization of the complexes showed the distortion of the macrocycles. The Pd complexes do not show luminescence emission, but are able to produce singlet oxygen upon irradiation. The PdII complexes were also inserted in human serum albumin (HSA) and dispersed in water; in this case, the protein protects the corroles from photobleaching, and a switch from the type II to the type I mechanism in reactive oxygen species (ROS) production is observed.

Influence of Fluorinated Substituents on the Near-Infrared Phosphorescence of 5d Metallocorroles

The influence of fluorinated substituents on the luminescent properties of rhenium-oxo, osmium-nitrido, and gold triarylcorroles was studied via a comparison of four ligands: triphenylcorrole (TPC), tris(p-trifluoromethylphenyl)corrole (TpCF3PC), tris{3,5-bis(trifluoromethyl)phenyl}corrole (T3,5-CF3PC), and tris(pentafluorophenyl)corrole (TPFPC). For each metal series examined, fluorinated substituents were found to enhance the luminescent properties, with the phosphorescence quantum yields and triplet decay times increasing in the order TPC < TpCF3PC < T3,5-CF3PC < TPFPC. Among the 11 complexes examined, the highest phosphorescence quantum yield, 2.2%, was recorded for Re[TPFPC](O).

B12 and F430 models: Metal- versus ligand-centered redox in cobalt and nickel tetradehydrocorrin derivatives

DFT calculations with the well-tested OLYP and B3LYP* exchange-correlation functionals (along with D3 dispersion corrections and all-electron ZORA STO-TZ2P basis sets) and careful use of group theory have led to significant insights into the question of metal- versus ligand-centered redox in Co and Ni B,C-tetradehydrocorrin complexes. For the cationic complexes, both metals occur in their low-spin M(II) forms. In contrast, the charge-neutral states vary for the two metals: while the Co(I) and Co^II-TDC^•2- state are comparable in energy for cobalt, a low-spin Ni^II-TDC^•2- state is clearly preferred for nickel. The latter behavior stands in sharp contrast to other corrinoids that reportedly stabilize a Ni(I) center.

Synthesis, Spectral, Redox, and Sensing Studies of β-Dicyanovinyl-Appended Corroles and Their Metal Complexes

A new family of β-dicyanovinyl (DCV)-appended corroles represented as MTPC(MN) (where M = 3H, Cu, Ag, and Co(PPh₃) and MN = malononitrile and TPC = 5,10,15-triphenylcorrole) were synthesized starting from the free base mono β-formyl corrole, H₃TPC(CHO), and characterized along with their respective MTPC(CHO) and MTPC complexes as to their spectroscopic and electrochemical properties in nonaqueous media. Comparisons between the two series of corroles demonstrate a pronounced substituent effect of the β-DCV group on the physicochemical properties making the MTPC(MN) derivatives substantially easier to reduce and more difficult to oxidize than the formyl or unsubstituted corroles. In addition, the colorimetric and spectral detection of 11 different anions (X) in the form of tetrabutylammonium salts (TBAX, X = PF₆^-, OAc^-, H₂PO₄^-, CN^-, HSO₄^-, NO₃^-, ClO₄^-, F^-, Cl^-, Br^-, and I^-) were also investigated in nonaqueous media. Of the investigated anions, only CN^- was found to induce changes in the UV-vis and ¹H NMR spectra of the β-DCV metallocorroles. This data revealed that CuTPC(MN) and AgTPC(MN) act as chemodosimeters for selective cyanide ion detection via a nucleophilic attack at the vinylic carbon of the DCV substituent, while (PPh₃)CoTPC(MN) acts as a chemosensor for cyanide ion sensing via axial coordination to the cobalt metal center. A low-limit detection of cyanide ions was observed at 1.69 ppm for CuTPC(MN) and 1.17 ppm for AgTPC(MN) in toluene.

Transition-Metal Isocorroles as Singlet Oxygen Sensitizers

Building on a highly efficient synthesis of pyrrole-appended isocorroles, we have worked out conditions for manganese, palladium, and platinum insertion into free-base 5/10-(2-pyrrolyl)-5,10,15-tris(4-methylphenyl)isocorrole, H₂[5/10-(2-py)TpMePiC]. Platinum insertion proved exceedingly challenging but was finally accomplished with cis-Pt(PhCN)₂Cl₂. All the complexes proved weakly phosphorescent in the near-infrared under ambient conditions, with a maximum phosphorescence quantum yield of 0.1% observed for Pd[5-(2-py)TpMePiC]. The emission maximum was found to exhibit a strong metal ion dependence for the 5-regioisomeric complexes but not for the 10-regioisomers. Despite the low phosphorescence quantum yields, all the complexes were found to sensitize singlet oxygen formation with moderate to good efficiency, with singlet oxygen quantum yields ranging over 21-52%. With significant absorption in the near-infrared and good singlet oxygen-sensitizing ability, metalloisocorroles deserve examination as photosensitizers in the photodynamic therapy of cancer and other diseases.

Trends in the Electronic Structure and Chemical Bonding of a Series of Porphyrinoid-Uranyl Complexes

In this paper, we have explored the relativistic density functional theory study on a series of deprotonated porphyrinoid (Lⁿ) complexes of uranyl to investigate the geometrical structures and chemical bonding. The ligands bound with uranyl in the 1:1 complexes [UO₂(Lⁿ)]^x (n = 4, 5, 6; x = 0, -1, -2), showing more thermodynamic stability for "in-cavity" structures of L⁵ and L⁶ than that of the "side-on" structure of L⁴ and an increase in stability with the increase of negative charges, L^2- < L^3- < L^4-. Among the six ligands, the cyclo[6]pyrrole presents the best selectivity toward uranyl. Based on chemical bonding analyses, the U-N_L bond in the in-cavity complexes adopts a typical dative N_L → U bond with mainly ionic bonding and significant covalency, which comes from the significant orbital interaction of U 5f_ϕ6d_δ7s hybrid AOs and N_L 2p-based MOs. This work provides a systematic understanding of the coordination chemistry in uranyl pyrrole-containing macrocycle complexes and the nature of chemical bonding in such systems, which may provide inspirations for the future design of synthetic targets that could be relevant to actinide separations or in the remediation of spent nuclear fuel.

Oxido-Molybdenum(V) Corroles as Robust Catalysts for Oxidative Bromination and Selective Epoxidation Reactions in Aqueous Media under Mild Conditions

Two new meso-substituted oxido-molybdenum corroles were synthesized and characterized by various spectroscopic techniques. In the thermogram, MoO[TTC] (1) exhibited excellent thermal stability up to 491 °C while MoO[TNPC] (2) exhibited good stability up to 318 °C. The oxidation states of the molybdenum(V) were verified by electron paramagnetic resonance (EPR) spectroscopy and exhibited an axial compression with d_xy¹ configuration. Oxido-molybdenum(V) complexes were utilized for the selective epoxidation of various olefins with high TOF values (2066-3287 h^-1) in good yields in a CH₃CN/H₂O (3:2, v/v) mixture in the presence of hydrogen peroxide as a green oxidant and NaHCO₃ as a promoter. The oxidative bromination catalytic activity of oxido-molybdenum(V) complexes in an aqueous medium has been reported for the first time. Surprisingly, MoO[TNPC] (2) biomimics of the vanadium bromoperoxidase (VBPO) enzyme activity exhibited remarkably high TOF values (36 988-61 646 h^-1) for the selective oxidative bromination of p-cresol and other phenol derivatives. Catalyst MoO[TNPC] (2) exhibited higher TOF values and better catalytic activity than catalyst MoO[TTC] (1) due to the presence of electron-withdrawing nitro groups evident from cyclic voltammetric studies.

Pyrrolylmethylene Appended Corrorin: Peripheral Coordination and Transformation to Pyridyl Incorporated Hemiporphycene Analogue

A pyrrolylmethylene appended corrorin 1 was synthesized and coordinated with [Rh(CO)₂Cl]₂ to afford 1-Rh with unique Rh^I-η²-CC bonding in addition to the coordination of the dipyrrin-like unit and a carbonyl ligand. Further oxidation of 1 afforded 2, exhibiting a hydrocorrorinone core, and it can be further transformed into pyrrolo[3,2-c]pyridine incorporated hemiporphycene analogue 3 upon treatment with HOAc. The side chain modifies the reactivity of corrorin and effectively tunes the NIR absorption of the resulting porphyrinoids.

One Carbon Ring Expansion of Bipyrrole to Bipyridine Enables Access to a π-Extended, Non-innocent, Corrole-like Ligand

A π-extended, diaza-triphenylene embedded, mono-anionic corrole analogue and its Ni^II complex were synthesized from a diaza-triphenylene precursor, which was obtained from a double one-carbon insertion into a naphthobipyrrole diester. Following conversion to the corresponding activated diol and acid-catalyzed condensation with pyrrole, subsequent reaction with pentafluorobenzaldehyde afforded mono-anionic, π-extended bipyricorrole-like macrocycle. Attempted Ni^II insertion with Ni(OAc)₂  ⋅ 4H₂ O resulted an ESR active, Ni^II bipyricorrole radical complex, which was converted to a stable cationic Ni^II complex upon treatment with [(Et₃ O)⁺ (SbCl₆ )^- ]. Both complexes were characterized by ¹ H and ¹³ C NMR, UV/Vis spectroscopy and single crystal X-ray diffraction analysis. The Ni^II bipyricorrole radical complex is converted to a cationic Ni^II complex by single-electron reduction using cobaltocene. Both the cationic Ni^II complex and the radical Ni^II complex exhibited ligand-centered redox behavior, whereas the Ni^II remains in the +2 oxidation state.

A Pilot Study for Legionella pneumophila Volatilome Characterization Using a Gas Sensor Array and GC/MS Techniques

Legionellosis is a generic term describing the pneumonic (Legionnaires' disease, LD) and non-pneumonic (Pontiac fever, PF) forms of infection with bacteria belonging to the genus Legionella. Currently, the techniques used to detect Legionella spp. in water samples have certain limitations and drawbacks, and thus, there is a need to identify new tools to carry out low-cost and rapid analysis. In this regard, several studies demonstrated that a volatolomics approach rapidly detects and discriminates different species of microorganisms via their volatile signature. In this paper, the volatile organic compounds (VOCs) pattern emitted in vitro by Legionella pneumophila cultures is characterized and compared to those produced by other Legionella species and by Pseudomonas aeruginosa, using a gas sensor array and gas chromatograph mass spectrometer (GC-MS). Bacterial cultures were measured at the 3rd and 7th day after the incubation. Sensor array data analyzed via the K-nearest neighbours (k-NN) algorithm showed a sensitivity to Legionella pneumophila identification at around 89%. On the other hand, GC-MS identified a bouquet of VOCs, mainly alcohols and ketones, that enable the differentiation of Legionella pneumophila in respect to other waterborne microorganisms.

Tuning the Molecular Structure of Corroles to Enhance the Antibacterial Photosensitizing Activity

The increase in the antibiotic resistance of bacteria is a serious threat to public health. Photodynamic inactivation (PDI) of micro-organisms is a reliable antimicrobial therapy to treat a broad spectrum of complex infections. The development of new photosensitizers with suitable properties is a key factor to consider in the optimization of this therapy. In this sense, four corroles were designed to study how the number of cationic centers can influence the efficacy of antibacterial photodynamic treatments. First, 5,10,15-Tris(pentafluorophenyl)corrole (Co) and 5,15-bis(pentafluorophenyl)-10-(4-(trifluoromethyl)phenyl)corrole (Co-CF₃) were synthesized, and then derivatized by nucleophilic aromatic substitution with 2-dimethylaminoethanol and 2-(dimethylamino)ethylamine, obtaining corroles Co-3NMe₂ and Co-CF₃-2NMe₂, respectively. The straightforward synthetic strategy gave rise to macrocycles with different numbers of tertiary amines that can acquire positive charges in an aqueous medium by protonation at physiological pH. Spectroscopic and photodynamic studies demonstrated that their properties as chromophores and photosensitizers were unaffected, regardless of the substituent groups on the periphery. All tetrapyrrolic macrocycles were able to produce reactive oxygen species (ROS) by both photodynamic mechanisms. Uptake experiments, the level of ROS produced in vitro, and PDI treatments mediated by these compounds were assessed against clinical strains: methicillin-resistant Staphylococcus aureus and Klebsiella pneumoniae. In vitro experiments indicated that the peripheral substitution significantly affected the uptake of the photosensitizers by microbes and, consequently, the photoinactivation performance. Co-3NMe₂ was the most effective in killing both Gram-positive and Gram-negative bacteria (inactivation > 99.99%). This work lays the foundations for the development of new corrole derivatives having pH-activable cationic groups and with plausible applications as effective broad-spectrum antimicrobial photosensitizers.

Reaction of Corroles with Sarcosine and Paraformaldehyde: A New Facet of Corrole Chemistry

Details on the unexpected formation of two new (dimethylamino)methyl corrole isomers from the reaction of 5,10,15-tris(pentafluorophenyl)corrolatogallium(III) with sarcosine and paraformaldehyde are presented. Semi-empirical calculations on possible mechanism pathways seem to indicate that the new compounds are probably formed through a Mannich-type reaction. The extension of the protocol to the free-base 5,10,15-tris(pentafluorophenyl)corrole afforded an unexpected new seven-membered ring corrole derivative, confirming the peculiar behavior of corroles towards known reactions when compared to the well-behaved porphyrin counterparts.

The Difficult Marriage of Triarylcorroles with Zinc and Nickel Ions

The coordination chemistry of corrole has witnessed a great improvement in the past few years and its Periodic Table has been widened to be so large that it is compared with that of porphyrins. However, Ni and Zn ions, commonly used with porphyrins for both synthetic and theoretical purposes, are sparsely reported in the case of corroles. Here, we report synthetic protocols for preparing Ni and Zn triarylcorrole complexes. In the case of Zn, the preliminary oxidation of the free base corrole in DMSO to the neutral corrole radical is a necessary step to obtain the coordination of the metal ion, because the direct reaction led to the formation of an open-chain tetrapyrrole. The Ni complex could be directly obtained by heating the free base corrole and Ni(II) salt to 100 °C in a DMSO solution containing FeCl₃. The non-innocent nature of the corrole ligand for both complexes has been elucidated by EPR, and in the case of the Zn derivative the first spectroelectrochemical characterization is presented.

The oxidation of triarylcorrole to the corresponding neutral radical species in DMSO is a key step to allow the preparation of the corresponding Ni and Zn complexes. Without this step, the oxidative ring opening of the macrocycle occurs, leading to the formation of a linear tetrapyrrole. The spectroscopic characterization of these species indicates their radical character. The stability of the Zn complex can be improved by peripheral substitution.

Manganese corrole catalyzed selective oxidation of styrene to benzaldehyde: sodium nitrite functions as an oxidant and cocatalyst

Catalytic oxidation using manganese corrole is a hot topic of contemporary porphyrin chemistry, in which PhIO, TBHP, PhI(OAc)₂, KHSO₅ and m-CPBA are usually used as oxidants. This article reports the first selective oxidation of styrene to benzaldehyde using a manganese(III) corrole catalyst and sodium nitrite (NaNO₂) as oxidant and cocatalyst at room temperature. The yield was 158.1% in air and 96.5% under a nitrogen atmosphere, showing oxygen might be involved in the reaction and that NaNO₂ is an oxygen source and cocatalyst in the system. The peripheral electron-withdrawing substituents of the manganese corrole were favorable to the catalytic reaction. Radical inhibition and H₂¹⁸O experiments proved that the catalytic reaction was a free radical and hydrolysis-involved reaction.

Synthesis, Characterization, and the N Atom Transfer Reactivity of a Nitridochromium(V) Complex Stabilized by a Corrolato Ligand

Metal complexes bearing nitrido ligands (M≡N) are at the forefront of current scientific research due to their resemblances with the metal complexes involved in the nitrogen fixation reactions. An oxo(corrolato)chromium(V) complex was used as a precursor complex for the facile synthesis of a new nitrido(corrolato)chromium(V) complex. The nitrido(corrolato)chromium(V) complex was characterized by various spectroscopic techniques. Density functional theory (DFT) calculations were performed on the nitrido(corrolato)chromium(V) complex to assign the vibrational and electronic transitions of this complex. The chromium-nitrogen (nitrido) bond distance obtained in the DFT-optimized structure is 1.530 Å and matches well with the earlier reported authentic Cr≡N bond distances obtained from the single-crystal X-ray diffraction data. This nitrido(corrolato)chromium(V) compound exhibited a sharp Soret band at 438 nm and a Q band at 608 nm. DFT calculations deliver that the origin of the bands at 438 and 608 nm is due to the intraligand charge transfer transitions. The nitrido(corrolato)chromium(V) complex showed one reversible oxidation and one reversible reduction couple at +0.53 and -0.06 V, respectively, vs the Ag/AgCl reference electrode. The simulation of the electron paramagnetic resonance data of the nitrido(corrolato)chromium(V) compound provided the following parameters: g iso = 1.987, A 53Cr = 26 G, and A 14N = 2.71 G. From all these analyses, we can conclude that the electronic configuration in the native state of nitrido(corrolato)chromium(V) can be best described as [(cor3-)CrV(N3-)]-. Reactions of nitrido(corrolato)chromium(V) with the chloro(porphyrinato)chromium(III) complex resulted in a complete intermetal N atom transfer reaction between chromium corrole and chromium porphyrin complexes. A second-order rate constant of 4.29 ± 0.10 M-1 s-1 was obtained for this reaction. It was also proposed that this reaction proceeds via a bimetallic μ-nitrido intermediate.

Mild and Efficient Heterogeneous Hydrogenation of Nitroarenes Facilitated by a Pyrolytically Activated Dinuclear Ni(II)-Ce(III) Diimine Complex

We communicate the assembly of a solid, Ce-promoted Ni-based composite that was applied as catalyst for the hydrogenation of nitroarenes to afford the corresponding organic amines. The catalytically active material described herein was obtained through pyrolysis of a SiO₂-pellet-supported bimetallic Ni-Ce complex that was readily synthesized prior to use from a MeO-functionalized salen congener, Ni(OAc)₂·4 H₂O, and Ce(NO₃)₃·6 H₂O. Rewardingly, the requisite ligand for the pertinent solution phase precursor was accessible upon straightforward and time-saving imine condensation of ortho-vanillin with 1,3-diamino-2,2′-dimethylpropane. The introduced catalytic protocol is operationally simple in that the whole reaction set-up is quickly put together on the bench without the need of cumbersome handling in a glovebox or related containment systems. Moreover, the advantageous geometry and compact-sized nature of the used pellets renders the catalyst separation and recycling exceptionally easy.

The nature of metal-metal bonding in Re-, Ru- and Os-corrole dimers

Studies of multiple bonding between transition metal complexes offer fundamental insight into the nature of bonding between metal ions and facilitate predictions of the physical properties and the reactivities of metal complexes containing metal-metal multiple bonds. Here we report a computational interrogation on the nature of the metal-metal bonding for neutral, oxidized, and reduced forms of dinuclear rhenium and osmium corrole complexes, [{Re[TpXPC]}2]0/1+/1- and [{Os[TpXPC]}2]0/1+/1-, using a complete active space self-consistent (CASSCF) methodology and density functional theory (DFT) calculations. For [{Re[TpXPC]}2]0, [{Ru[TpXPC]}2]0, and [{Os[TpXPC]}2]0, CASSCF calculations shows that the effective bond order is 3.29, 2.63, and 2.73, respectively. On their oxidized forms, [{Re[TpXPC]}2]1+, [{Ru[TpXPC]}2]1+, and [{Os[TpXPC]}2]1+ molecules, the results indicate an electron removal from a ligand-based orbital, where [{Re[TpXPC]}2]1+ gives slightly different geometry from its neutral form due to populating the δ* orbital. In this regard, the CASSCF calculations give an effective bond order of 3.25 which is slightly lower than in the [{Re[TpXPC]}2]0. On their reduced forms, the electron addition appears to be in the metal-based orbital for [{Re[TpXPC]}2]1- and [{Ru[TpXPC]}2]1- whereas in the ligand-based orbital for the Os-analogue which has no effect on the Os-Os bonding, an effective bond order of 3.18 and 2.17 is presented for the [{Re[TpXPC]}2]1- and [{Ru[TpXPC]}2]1-, respectively, within the CASSCF simulations. These results will further encourage theoreticians and experimentalists to design metalloporphyrin dimers with distinct metal-metal bonding.

Porphyrinoid actinide complexes

The diverse coordination modes and electronic features of actinide complexes of porphyrins and related oligopyrrolic systems (referred to as "porpyrinoids") have been the subject of interest since the 1960s. Given their stability and accessibility, most work with actinides has focused on thorium and uranium. This trend is also seen in the case of porphyrinoid-based complexation studies. Nevertheless, the diversity of ligand environments provided by porphyrinoids has led to the stabilization of a number of unique complexes with the early actinides that are often without structural parallel within the broader coordination chemical lexicon. This review summarizes key examples of prophyrinoid actinide complexes reported to date, including the limited number of porphyrinoid systems involving transuranic elements. The emphasis will be on synthesis and structure; however, the electronic features and reactivity pattern of representative systems will be detailed as well. Coverage is through December of 2021.

Investigation of the Nature of Intermolecular Interactions in Tetra(thiocyanato)corrolato-Ag(III) Complexes: Agostic or Hydrogen Bonded?

Tetra(thiocyanato)corrolato-Ag(III) complexes presented here constitute a new class of metallo-corrole complexes. The spectroscopic properties of these complexes are quite unusual and interesting. For example, the absorption spectra of these β-substituted corrolato-Ag(III) complexes are very different from those of the β-unsubstituted corrolato-Ag(III) derivatives. Single-crystal XRD analysis of a representative tetra(thiocyanato)corrolato-Ag(III) derivative reveals C-H···Ag interactions. The C-H···Ag interactions are rarely demonstrated in the crystal lattice of a discrete coordination/organometallic compound. Optimization of the hydrogen positions of the crystal structure discloses the geometrical parameters of the said interaction as a Ag···H distance of 2.597 Å and ∠C-H···Ag of 109.62°. The natural bond orbital analysis provides information about the donor-acceptor orbitals involved in the interactions and their interaction energies. It was observed that the σ_C-H orbital overlaps with the vacant d-orbital of Ag with an interaction energy of 17.93 kJ/mol. The filled d-orbital of Ag overlaps with the σ*_C-H orbital with an interaction energy of 4.79 kJ/mol. The highlights of this work are that the H···Ag distance is outside of the distance range for the typical agostic interaction but fitted with the weak H-bond distance. However, the ∠C-H···Ag angle is within the range of the agostic interaction. Both crystallographic data and electronic structure calculations reveal that these kinds of intermolecular interactions in square-planar d⁸ Ag(III) complexes are intermediate in nature. Thus, they cannot be categorically called either hydrogen bonding or agostic interaction.

Corroles at work: a small macrocycle for great applications

Corrole chemistry has witnessed an impressive boost in studies in the last 20 years, thanks to the possibility of preparing corrole derivatives by simple synthetic procedures. The investigation of a large number of corroles has highlighted some peculiar characteristics of these macrocycles, having features different from those of the parent porphyrins. With this progress in the elucidation of corrole properties, attention has been focused on the potential for the exploitation of corrole derivatives in different important application fields. In some areas, the potential of corroles has been studied in certain detail, for example, the use of corrole metal complexes as electrocatalysts for energy conversion. In some other areas, the field is still in its infancy, such as in the exploitation of corroles in solar cells. Herein, we report an overview of the different applications of corroles, focusing on the studies reported in the last five years.

Synthesis, Structure, and Properties of Palladium(II) Complex of α-Formyl Pyrrolyl Dipyrromethene

A simple α-formyl pyrrolyl dipyrromethene ligand was synthesized by deboronation of BF2-complex of α-formyl pyrrolyl dipyrrin under Lewis acid-catalyzed conditions. The α-formyl pyrrolyl dipyrrin ligand was treated with PdCl2 in...

Oxo(corrolato)vanadium(iv) catalyzed epoxidation: oxo(peroxo)(corrolato)vanadium(v) is the true catalytic species

Oxo(corrolato)vanadium(iv) complexes are highly efficient oxidizers in the presence of H2O2 and KHCO3, and oxo(peroxo)(corrolato)vanadium(v) complexes are the catalytic intermediate.

Rare-earth based tetrapyrrolic sandwiches: chemistry, materials and applications

This review summarises advances in chemistry of tetrapyrrole sandwiches with rare earth elements and highlights the current state of their use in single-molecule magnetism, organic field-effect transistors, conducting materials and nonlinear optics.

Electrocatalytic Hydrogen Production by CN‑ substituted Cobalt Triaryl Corroles

Four cobalt corrole complexes bearing 0–3 cyano groups on the para-position of the three meso-phenyl rings of the macrocycle were synthesized, characterized and applied for electrocatalytic H2 production under both...

A DMRG/CASPT2 Investigation of Metallocorroles: Quantifying Ligand Noninnocence in Archetypal 3d and 4d Element Derivatives

Hybrid density functional theory (B3LYP) and density matrix renormalization group (DMRG) theory have been used to quantitatively compare the degree of ligand noninnocence (corrole radical character) in seven archetypal metallocorroles. The seven complexes, in decreasing order of corrole noninnocent character, are Mn[Cor]Cl > Fe[Cor]Cl > Fe[Cor](NO) > Mo[Cor]Cl2 > Ru[Cor](NO) ≈ Mn[Cor]Ph ≈ Fe[Cor]Ph ≈ 0, where [Cor] refers to the unsubstituted corrolato ligand. DMRG-based second-order perturbation theory calculations have also yielded detailed excited-state energetics data on the compounds, shedding light on periodic trends involving middle transition elements. Thus, whereas the ground state of Fe[Cor](NO) (S = 0) is best described as a locally S = 1/2 {FeNO}7 unit antiferromagnetically coupled to a corrole A' radical, the calculations confirm that Ru[Cor](NO) may be described as simply {RuNO}6-Cor3-, that is, having an innocent corrole macrocycle. Furthermore, whereas the ferromagnetically coupled S = 1{FeNO}7-Cor•2- state of Fe[Cor](NO) is only ∼17.5 kcal/mol higher than the S = 0 ground state, the analogous triplet state of Ru[Cor](NO) is higher by a far larger margin (37.4 kcal/mol) relative to the ground state. In the same vein, Mo[Cor]Cl2 exhibits an adiabatic doublet-quartet gap of 36.1 kcal/mol. The large energy gaps associated with metal-ligand spin coupling in Ru[Cor](NO) and Mo[Cor]Cl2 reflect the much greater covalent character of 4d-π interactions relative to analogous interactions involving 3d orbitals. As far as excited-state energetics is concerned, DMRG-CASPT2 calculations provide moderate validation for hybrid density functional theory (B3LYP) for qualitative purposes, but underscore the possibility of large errors (>10 kcal/mol) in interstate energy differences.

Generation of Cobalt-Containing Nanoparticles on Carbon via Pyrolysis of a Cobalt Corrole and Its Application in the Hydrogenation of Nitroarenes

We report on the manufacture of a state-of-the-art heterogeneous non-noble metal catalyst, which is based on a molecularly well-defined phosphine-tagged cobalt corrole complex. This precursor compound is readily synthesized from convenient starting materials while the active material is obtained through wet-impregnation of the pertinent metalliferous macrocycle onto carbon black followed by controlled pyrolysis of the loaded carrier material under an inert gas atmosphere. Thus, the obtained composite was then applied in the heterogeneous hydrogenation of various nitroarenes to yield a vast array of valuable aniline derivatives that were conveniently isolated as their hydrochloride salts. The introduced catalytic protocol is robust and user-friendly with the entire assembly of the reaction set-up enabling the conduction of the experiments on the laboratory bench without any protection from air.

Designer Heme Proteins: Achieving Novel Function with Abiological Heme Analogues

Heme proteins have proven to be a convenient platform for the development of designer proteins with novel functionalities. This is achieved by substituting the native iron porphyrin cofactor with a heme analogue that possesses the desired properties. Replacing the iron center of the porphyrin with another metal provides one inroad to novel protein function. A less explored approach is substitution of the porphyrin cofactor with an alternative tetrapyrrole macrocycle or a related ligand. In general, these ligands exhibit chemical properties and reactivity that are distinct from those of porphyrins. While these techniques have most prominently been utilized to develop artificial metalloenzymes, there are many other applications of this methodology to problems in biochemistry, health, and medicine. Incorporation of synthetic cofactors into protein environments represents a facile way to impart water solubility and biocompatibility. It circumvents the laborious synthesis of water-soluble cofactors, which often introduces substantial charge that leads to undesired bioaccumulation. To this end, the incorporation of unnatural cofactors in heme proteins has enabled the development of designer proteins as optical oxygen sensors, MRI contrast agents, spectroscopic probes, tools to interrogate protein function, antibiotics, and fluorescent proteins.Incorporation of an artificial cofactor is frequently accomplished by denaturing the holoprotein with removal of the heme; the refolded apoprotein is then reconstituted with the artificial cofactor. This process often results in substantial protein loss and does not necessarily guarantee that the refolded protein adopts the native structure. To circumvent these issues, our laboratory has pioneered the use of the RP523 strain of E. coli to incorporate artificial cofactors into heme proteins using expression-based methods. This strain lacks the ability to biosynthesize heme, and the bacterial cell wall is permeable to heme and related molecules. In this way, heme analogues supplemented in the growth medium are incorporated into heme proteins. This approach can also be leveraged for the direct expression of the apoprotein for subsequent reconstitution.These methodologies have been exploited to incorporate non-native cofactors into heme proteins that are resistant to harsh environmental conditions: the heme nitric oxide/oxygen binding protein (H-NOX) from Caldanaerobacter subterraneus (Cs) and the heme acquisition system protein A (HasA) from Pseudomonas aeruginosa (Pa). The exceptional stability of these proteins makes them ideal scaffolds for biomedical applications. Optical oxygen sensing has been accomplished using a phosphorescent ruthenium porphyrin as the artificial heme cofactor. Paramagnetic manganese and gadolinium porphyrins yield high-relaxivity, protein-based MRI contrast agents. A fluorescent phosphorus corrole serves as a heme analogue to produce fluorescent proteins. Iron complexes of nonporphyrin cofactors bound to HasA inhibit the growth of pathogenic bacteria. Moreover, HasA can deliver a gallium phthalocyanine into the bacterial cytosol to serve as a sensitizer for photochemical sterilization. Together, these examples illustrate the potential for designer heme proteins to address burgeoning problems in the areas of health and medicine. The concepts and methodologies presented in this Account can be extended to the development of next-generation biomedical sensing and imaging agents to identify and quantify clinically relevant metabolites and other key disease biomarkers.

Biopyrrin Pigments: From Heme Metabolites to Redox-Active Ligands and Luminescent Radicals

Redox-active ligands in coordination chemistry not only modulate the reactivity of the bound metal center but also serve as electron reservoirs to store redox equivalents. Among many applications in contemporary chemistry, the scope of redox-active ligands in biology is exemplified by the porphyrin radicals in the catalytic cycles of multiple heme enzymes (e.g., cytochrome P450, catalase) and the chlorophyll radicals in photosynthetic systems. This Account reviews the discovery of two redox-active ligands inspired by oligopyrrolic fragments found in biological settings as products of heme metabolism.Linear oligopyrroles, in which pyrrole heterocycles are linked by methylene or methine bridges, are ubiquitous in nature as part of the complex, multistep biosynthesis and degradation of hemes and chlorophylls. Bile pigments, such as biliverdin and bilirubin, are common and well-studied tetrapyrroles with characteristic pyrrolin-2-one rings at both terminal positions. The coordination chemistry of these open-chain pigments is less developed than that of porphyrins and other macrocyclic oligopyrroles; nevertheless, complexes of biliverdin and its synthetic analogs have been reported, along with fluorescent zinc complexes of phytobilins employed as bioanalytical tools. Notably, linear conjugated tetrapyrroles inherit from porphyrins the ability to stabilize unpaired electrons within their π system. The isolated complexes, however, present helical structures and generally limited stability.Smaller biopyrrins, which feature three or two pyrrole rings and the characteristic oxidized termini, have been known for several decades following their initial isolation as urinary pigments and heme metabolites. Although their coordination chemistry has remained largely unexplored, these compounds are structurally similar to the well-established tripyrrin and dipyrrin ligands employed in a broad variety of metal complexes. In this context, our study of the coordination chemistry of tripyrrin-1,14-dione and dipyrrin-1,9-dione was motivated by the potential to retain on these compact, versatile platforms the reversible ligand-based redox chemistry of larger tetrapyrrolic systems.The tripyrrindione ligand coordinates several divalent transition metals (i.e., Pd(II), Ni(II) Cu(II), Zn(II)) to form neutral complexes in which an unpaired electron is delocalized over the conjugated π system. These compounds, which are stable at room temperature and exposed to air, undergo reversible one-electron processes to access different redox states of the ligand system without affecting the oxidation state and coordination geometry of the metal center. We also characterized ligand-based radicals on the dipyrrindione platform in both homoleptic and heteroleptic complexes. In addition, this study documented noncovalent interactions (e.g., interligand hydrogen bonds with the pyrrolinone carbonyls, π-stacking of ligand-centered radicals) as important aspects of this coordination chemistry. Furthermore, the fluorescence of the zinc-bound tripyrrindione radical and the redox-switchable emission of a dipyrrindione BODIPY-type fluorophore showcased the potential interplay of redox chemistry and luminescence in these compounds. Supported by computational analyses, the portfolio of properties revealed by this investigation takes the tripyrrindione and dipyrrindione motifs of heme metabolites to the field of redox-active ligands, where they are positioned to offer new opportunities for catalysis, sensing, supramolecular systems, and functional materials.