Design principles and direct applications of cobalt-based metal-organic frameworks for electrochemical energy storage

0D-2D multifunctional bimetallic MOF derivative-MXene heterojunction for high areal capacity lithium-sulfur batteries

Lithium-sulfur (Li-S) batteries have attracted much attention due to their high specific capacity. However, at high loads and rates, the polysulfides conversion rate and ion transport of batteries are slow, limiting their commercialization. This work reports zero-dimensional (0D) bimetallic MOF derivatives grown in situ on two-dimensional (2D) MXene by electrostatic adsorption (FeCo@Ti3C2). The 0D bimetallic structure effectively avoids the stacking of MXene while providing a dual catalytic site for polysulfides. The 2D structure of MXene also provides a large number of pathways for the rapid diffusion of lithium ions. This 0D-2D heterostructured heterogeneous catalyst with bimetallic synergistic active sites efficiently immobilizes and catalyzes polysulfides, providing a fast charge transfer pathway for the electrochemical reaction of lithium polysulfides. The Li-S battery with this multifunctional 0D-2D heterojunction structure catalyst has outstanding high rate capacity (703 mAh g-1 at 4 C at room temperature and 555 mAh g-1 at 2 C at 0 °C), fascinating capacity at high load (5.5 mAh cm-2 after 100 cycles at a high sulfur content of 8.2 mg cm-2). The study provides new ideas for the commercialization of high-efficiency Li-S batteries.

Effect of synthesis temperature on the structural morphology of a metal-organic framework and the capacitor performance of derived cobalt-nickel layered double hydroxides

Three-dimensional interconnected nickel-cobalt layered double hydroxides (NiCo-LDHs) were prepared on nickel foam by ion exchange using a cobalt-based metal-organic framework (Co-MOF) as a template at different temperatures. The effects of the Co-MOF preparation temperature on the growth, mass, morphology, and electrochemical properties of the Co-MOF and derived NiCo-LDH samples were studied. The synthesis temperature from 30 to 50 °C gradually increased the mass of the active material and the thickness of the Co-MOF sheets grown on the nickel foam. The higher the temperature is, the larger the proportion of Co3+. β-Cobalt hydroxide (β-Co(OH)2) sheets were generated above 60 °C. The morphology and mass loading pattern of the derived flocculent layer clusters of NiCo-LDH were inherited from metal-organic frameworks (MOFs). The areal capacitance of NiCo-LDH shows an inverted U-shaped curve trend with increasing temperature. The electrode material synthesized at 50 °C had a tremendous specific capacitance of 7631 mF·cm-2 at a current density of 2 mA·cm-2. The asymmetric supercapacitor assembled with the sample and active carbon (AC) achieved an energy density of 55.0 Wh·kg-1 at a power density of 800.0 W·kg-1, demonstrating the great potential of the NiCo-LDH material for energy storage. This work presents a new strategy for designing and fabricating advanced green supercapacitor materials with large power and energy densities.

Two highly stable isoreticular M8-pyrazolate (M = Co, Ni) metal-organic frameworks for CO2 conversion

Two isoreticular metal-organic frameworks (MOFs) constructed from M8(OH)4(H2O)2(pyz)12 (M = Co, Ni; pyz = pyrazolate) secondary building units (SBUs) and Ni(salen)-derived metalloligands were synthesized. The two MOFs were found to be highly stable in a wide pH and temperature range. Together with the tetrabutylammonium bromide (TBAB) co-catalyst, they catalysed the cycloaddition of CO2 to epoxides with near-quantitative yields and easy recyclability for at least 11 cycles.

Trajectory in biological metal-organic frameworks: Biosensing and sustainable strategies-perspectives and challenges

The ligand attribute of biomolecules to form coordination bonds with metal ions led to the discovery of a novel class of materials called biomolecule-associated metal-organic frameworks (Bio-MOFs). These biomolecules coordinate in multiple ways and provide versatile applications. Far-spread bio-ligands include nucleobases, amino acids, peptides, cyclodextrins, saccharides, porphyrins/metalloporphyrin, proteins, etc. Low-toxicity, self-assembly, stability, designable and selectable porous size, the existence of rigid and flexible forms, bio-compatibility, and synergistic interactions between metal ions have led Bio-MOFs to be commercialized in industries such as sensors, food, pharma, and eco-sensing. The rapid growth and commercialization are stunted by absolute bio-compatibility issues, bulk morphology that makes it rigid to alter shape/porosity, longer reaction times, and inadequate research. This review elucidates the structural vitality, biocompatibility issues, and vital sensing applications, including challenges for incorporating bio-ligands into MOF. Critical innovations in Bio-MOFs' applicative spectrum, including sustainable food packaging, biosensing, insulin and phosphoprotein detection, gas sensing, CO2 capture, pesticide carriers, toxicant adsorptions, etc., have been elucidated. Emphasis is placed on biosensing and biomedical applications with biomimetic catalysis and sensitive sensor designing.

Reduced Graphene Oxide-Supported Iron-Cobalt Alloys as High-Performance Catalysts for Oxygen Reduction Reaction

Exploring non-precious metal-based catalysts for oxygen reduction reactions (ORR) as a substitute for precious metal catalysts has attracted great attention in recent times. In this paper, we report a general methodology for preparing nitrogen-doped reduced graphene oxide (N-rGO)-supported, FeCo alloy (FeCo@N-rGO)-based catalysts for ORR. The structure of the FeCo@N-rGO based catalysts is investigated using X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, and transition electron microscopy, etc. Results show that the FeCo alloy is supported by the rGO and carbon that derives from the organic ligand of Fe and Co ions. The eletrocatalytic performance is examined by cyclic voltammetry, linear scanning voltammetry, Tafel, electrochemical spectroscopy impedance, rotate disc electrode, and rotate ring disc electrode, etc. Results show that FeCo@N-rGO based catalysts exhibit an onset potential of 0.98 V (vs. RHE) and a half-wave potential of 0.93 V (vs. RHE). The excellent catalytic performance of FeCo@N-rGO is ascribed to its large surface area and the synergistic effect between FeCo alloy and N-rGO, which provides a large number of active sites and a sufficient surface area.

A one-dimensional cobalt-based coordination polymer as a cathode material of lithium-ion batteries

For obtaining high-performance lithium-ion batteries, it is important to develop new cathode materials with high capacity. Herein, a one-dimensional coordination polymer [Co(4-DTBPT) (DMF)₂(H₂O)₂] (4-DTBPT) (C₁₀H₄O₈) (Co-DTBPT) (4-DTBPT = 2,7-di(4H-1,2,4-triazol-4yl)benzo[lmn][3,8] phenanthroline-1,3,6,8-(2H,7H)-tetraone; DMF = dimethylformamide) was synthesized and its electrochemical performance as the cathode material of lithium-ion batteries was first investigated. The Co-DTBPT electrode showed better cycling stability and a specific capacity of 55 mA h g^-1 at 50 mA g^-1 after 50 cycles, and the coulombic efficiency was close to 100%. The capacity contribution of the Co-DTBPT electrode may be ascribed to the redox reaction of the Co(II) ion and the 4-DTBPT ligand in the process of charge and discharge. Our work proves once again that using one-dimensional coordination polymers as cathode materials for lithium-ion batteries is a feasible way.

Advances of Electroactive Metal-Organic Frameworks

The preparation of electroactive metal-organic frameworks (MOFs) for applications of supercapacitors and batteries has received much attention and remarkable progress during the past few years. MOF-based materials including pristine MOFs, hybrid MOFs or MOF composites, and MOF derivatives are well designed by a combination of organic linkers (e.g., carboxylic acids, conjugated aromatic phenols/thiols, conjugated aromatic amines, and N-heterocyclic donors) and metal salts to construct predictable structures with appropriate properties. This review will focus on construction strategies of pristine MOFs and hybrid MOFs as anodes, cathodes, separators, and electrolytes in supercapacitors and batteries. Descriptions and discussions follow categories of electrochemical double-layer capacitors (EDLCs), pseudocapacitors (PSCs), and hybrid supercapacitors (HSCs) for supercapacitors. In contrast, Li-ion batteries (LIBs), Lithium-sulfur batteries (LSBs), Lithium-oxygen batteries (LOBs), Sodium-ion batteries (SIBs), Sodium-sulfur batteries (SSBs), Zinc-ion batteries (ZIBs), Zinc-air batteries (ZABs), Aluminum-sulfur batteries (ASBs), and others (e.g., LiSe, NiZn, H⁺ , alkaline, organic, and redox flow batteries) are categorized for batteries.

Speciation of Oxygen Functional Groups on the Carbon Support Controls the Electrocatalytic Activity of Cobalt Oxide Nanoparticles in the Oxygen Evolution Reaction

The effective use of the active phase is the main goal of the optimization of supported catalysts. However, carbon supports do not interact strongly with metal oxides, thus, oxidative treatment is often used to enhance the number of anchoring sites for deposited particles. In this study, we set out to investigate whether the oxidation pretreatment of mesoporous carbon allows the depositing of a higher loading and a more dispersed cobalt active phase. We used graphitic ordered mesoporous carbon obtained by a hard-template method as active phase support. To obtain different surface concentrations and speciation of oxygen functional groups, we used a low-temperature oxygen plasma. The main methods used to characterize the studied materials were X-ray photoelectron spectroscopy, transmission electron microscopy, and electrocatalytic tests in the oxygen evolution reaction. We have found that the oxidative pretreatment of mesoporous carbon influences the speciation of the deposited cobalt oxide phase. Moreover, the activity of the electrocatalysts in oxygen evolution is positively correlated with the relative content of the COO-type groups and negatively correlated with the C═O-type groups on the carbon support. Furthermore, the high relative content of COO-type groups on the carbon support is correlated with the presence of well-dispersed Co₃O₄ nanoparticles. The results obtained indicate that to achieve a better dispersed and thus more catalytically active material, it is more important to control the speciation of the oxygen functional groups rather than to maximize their total concentration.

Waste PET Plastic-Derived CoNi-Based Metal-Organic Framework as an Anode for Lithium-Ion Batteries

Recycling waste PET plastics into metal-organic frameworks is conducive to both pollution alleviation and sustainable economic development. Herein, we have utilized waste PET plastic to synthesize CoNi-MOF applied to lithium battery anode materials via a low-temperature solvothermal method for the first time. The preparation process is effortless, and the sources' conversion rate can reach almost 100%. In addition, the anode performance of MOFs with various Co/Ni mole ratios was investigated. The as-synthesized Co0.8Ni-MOF exhibits excellent crystallinity, purity, and electrochemical performance. The initial discharge and charge capacities are 2496 and 1729 mAh g-1, respectively. Even after 200 cycles, the Co0.8Ni-MOF electrode can exhibit a high Coulombic efficiency of over 99%. Consequently, given the environmental and economic benefits, the Co0.8Ni-MOF derived from waste PET plastic is thought to be an appealing anode material for lithium-ion batteries.

Regulating the Electronic Configuration of Spinel Zinc Manganate Derived from Metal-Organic Frameworks: Controlled Synthesis and Application in Anode Materials for Lithium-Ion Batteries

In recent years, transition metal oxides have been considered as the most promising anode materials due to their high theoretical capacity, low price, and abundant natural reserves. Among them, zinc manganate is used as an electrode material for anodes, whose application is mostly hindered due to its poor ionic/electronic conductivity. In this work, a series of ZnMn₂O₄ (ZMO) are synthesized by a hydrothermal technique coordinated with a metal-organic framework-based high-temperature calcination process for their application as an anode in lithium-ion batteries (LIBs). Meanwhile, this study systematically explores the influence of carbon doping and the types of organic ligands and oxygen vacancies on the electrochemical properties of the synthesized ZMO. Density functional theory (DFT) calculations and experimental investigations reveal that the introduction of carbon and oxygen vacancies can enhance electronic conductivity, more active sites and faster Li⁺ adsorption, resulting in better electrochemical performances. As expected, all ZMOs with carbon doping (PMA-ZMO, MI-ZMO, and BDC-ZMO) derived from 1,2,4,5-benzenetetracarboxylic acid, 2-methylimidazole, and 1,4-dicarboxybenzene achieve outstanding electrochemical performance. Meanwhile, the introduction of oxygen vacancies can enhance the electronic conductivity and can significantly reduce the activation energy of Li⁺ transport, thereby accelerating the Li⁺ diffusion kinetics in the lithiation/delithiation process. Furthermore, an optimal ZMO anode material synthesized by 2-methylimidazole delivers a high reversible capacity of 1174.7 mA h g^-1 after 300 cycles at 0.1 A g^-1 and 600 mA h g^-1 at 0.5 A g^-1 after 300 cycles. After high-rate charge and discharge cycles, the specific capacity rapidly recovers to a value greater than the initial value, which proves the unusual activation and thereby an excellent rate property of the electrode. Hence, we conclude that ZMO provides potential application prospects as an anode electrode material for LIBs.

Application of Fiber Biochar-MOF Matrix Composites in Electrochemical Energy Storage

Fiber biochar-metal organic framework (MOF) composites were successfully prepared by three different biochar preparation methods, namely, the ionic liquid method, the pyrolysis method, and the direct composite method. The effects of the different preparation methods of fiber biochar on the physical and chemical properties of the biochar-MOF composites showed that the composite prepared by the ionic liquid method with the Zeolite-type imidazolate skeleton -67 (ZIF-67) composite after high temperature treatment exhibited a better microstructure. Electrochemical tests showed that it had good specific capacity, a fast charge diffusion rate, and a relatively good electrochemical performance. The maximum specific capacity of the composite was 63.54 F/g when the current density was 0.01 A/g in 1 mol/L KCl solution. This work explored the preparation methods of fiber biochar-MOF composites and their application in the electrochemical field and detailed the relationship between the preparation methods of the composites and the electrochemical properties of the electrode materials.

Construction of a sandwich-like UiO-66-NH2@Pt@mSiO2 catalyst for one-pot cascade reductive amination of nitrobenzene with benzaldehyde

Heterogeneous noble metal-based catalysts with stable, precise structures and high catalytic performance are of great research interest for sustainable catalysis. Herein, we designed the novel sandwich-like metal-organic-framework composite nanocatalyst UiO-66-NH₂@Pt@mSiO₂ using UiO-66-NH₂@Pt as the core, and mesoporous SiO₂ as the shell. The obtained UiO-66-NH₂@Pt@mSiO₂ catalyst shows a well-defined structure and interface, and the protection of the mSiO₂ shell can efficiently prevent Pt NPs from aggregating and leaching in the reaction process. In the one-pot cascade reaction of nitroarenes and aromatic aldehydes to secondary amines, UiO-66-NH₂@Pt@mSiO₂ shows excellent catalytic performance due to acid catalytic sites provided by UiO-66-NH₂ and Pt hydrogenation catalytic sites. Furthermore, the porous structure of the UiO-66-NH₂@Pt@mSiO₂ catalyst also enhances reactant diffusion and improves the reaction efficiency. This work provides a new avenue to meticulously design well-defined nanocatalysts with superior catalytic performance and stability for challenging reactions.

Coordination networks constructed from a flexible ligand: single-crystal-to-single-crystal transformations and thermoresponsive and electrochemical performances

This work reveals the relationships between the structures and redox/thermoresponsive/electrochemical performances of the new 2D coordination networks by single-crystal-to-single-crystal analysis and electrochemical measurements.

Defects Engineering of Lightweight Metal-Organic Frameworks-Based Electrocatalytic Membrane for High-Loading Lithium-Sulfur Batteries

The sluggish kinetics and shuttle effect of lithium polysulfide intermediates are the major issues that retard the practical applications of lithium-sulfur (Li-S) batteries. Herein, we introduce a defect engineering strategy to construct a defected-UiO-66-NH₂-4/graphene electrocatalytic membrane (D-UiO-66-NH₂-4/G EM) which could accelerate the conversion of lithium polysulfides in high sulfur loadings and low electrolyte/sulfur (E/S) ratio Li-S batteries. Metal-organic frameworks (UiO-66-NH₂) can be directionally chemical engraved to form concave octahedra with abundant defects. According to electrocatalytic kinetics and DFT calculations studies, the D-UiO-66-NH₂-4 architecture effectively provides ample sites to capture polysulfides via strong chemical affinity and effectively delivers electrocatalytic activity of polysulfide conversion. As a result, a Li-S battery with such an electrocatalytic membrane delivers a high capacity of 12.3 mAh cm^-2 (1013 mAh g^-1) at a sulfur loading up to 12.2 mg·_S cm^-2 under a lean electrolyte condition (E/S = 5 μL mg^-1-sulfur) at 2.1 mA cm^-2 (0.1 C). Moreover, a prototype soft package battery also exhibits excellent cycling stability with a maintained capacity of 996 mAh g^-1 upon 100 cycles.