Copper halide-chalcogenoether and -chalcogenone networks: Chain and cluster motifs, polymer dimensionality and photophysical properties

High-Temperature Solid-State Post-Synthetic Modification of Highly Luminescent Cu(I) Metallacycles toward New Luminescent Thermic Tracers

A new luminescent Cu(I) tetrametallic metallacycle B is reported that features very rare semi-bridging aqua ligands. When heated markedly above room temperature, this compound undergoes a post-synthetic transformation in the solid-state, affording the new luminescent metallacycle C. Thermogravimetric analysis, IR spectroscopy and single-crystal X-ray diffraction reveal that this alteration preserves the gross tetrametallic macrocycle structure, but is caused by the release of the coordinated water molecules with the concomitant formation of cuprophilic interactions. This transition induces a shift from eye-perceived green (B) to blue (C) room-temperature luminescence for these molecular solids. Photophysical measurements and time-dependent density-functional theory calculations have been conducted to identify the origins of the emission properties lying in these structurally related assemblies, and suggest that thermally activated delayed fluorescence dominates the radiative relaxation pathways. This study highlights the innovative feature of Cu(I) derivatives, offering access to stimuli-sensitive materials that can witness, a posteriori, the exceeding of critical temperatures in their environment.

Pseudohalide Ions as Ligands to Tune Architecture and Luminescence of Polymetallic CU(I) Assemblies

The reaction of preassembled Cu(I) bimetallic units {Cu2(dppm)2} and {Cu2(dppa)2} (dppm: bis(diphenylphosphino)methane and dppa: bis(diphenylphosphino)amine) with pseudohalide linkers (azido, dicyanamide, and tricyanomethanide) allows for the quantitative and selective preparation of three discrete tetrametallic metallacycles of formula [Cu4(μ2-dppm)4(N3)2](PF6)2, [Cu4(μ2-dppm)4(N(CN)2)2](PF6)2, and [Cu4(μ2-dppm)4(C(CN)3)4]. To explore further the impact of the linker on the architecture and dimensionality of the molecular edifice, the study was extended to more sophisticated tetradentate cyanocarbanion ligands (tcnsMe-: 2-(methylthio)-1,1,3,3-propanetetracarbonitrile and tcnsEt-: 2-(ethylthio)-1,1,3,3-propanetetracarbonitrile). Three ladder-like one-dimensional coordination polymers and an octametallic metallacycle have been obtained. The careful comparison of the metric and geometrical intramolecular and intermolecular parameters observed in this series of seven derivatives allows for rationalization of their molecular architectures. The subtle balance between the length and steric hindrance of the ligand and the formation of noncovalent interaction networks greatly influences the topology and dimensionality of the resulting assemblies and will be discussed hereafter. The photophysical properties of these seven polymetallic Cu(I) compounds have also been also studied.

Photoluminescent copper(I) iodide alkylpyridine thin films as sensors for volatile halogenated compounds

The paper presents the fabrication and characterization of [CuI(L)]n thin films, where L represents various alkylpyridine ligands including 4-methylpyridine, 3-methylpyridine, 2-methylpyridine, 4-tbutylpyridine, 3,4-dimethylpyridine, and 3,5-dimethylpyridine. The thin films were synthesized by exposing the corresponding ligands to CuI thin films through vapor deposition. The coordination reactions occurring on the films were investigated using PXRD and time-dependent photoluminescence spectroscopy, and a comparison was made between the structures of the thin films and the corresponding powder phases. The films showed primarly blue emission (λem = 457-515 nm) and polymeric structures with excited state lifetimes ranging from 0.6 to 5.5 μs. Significantly, the studied compounds exhibited fast reversible luminescence quenching when exposed to vapors of dichloromethane and dibromomethane (15 and 30 min respectively), and the luminescence was restored upon re-exposure to the alkylpyridine ligand (after 20 min). These findings indicate that these thin films hold promise for applications as sensors (with sensitive and reversible detection capability) for volatile halogen-based compounds (VHC).

Cubane Dimerization: Cu4 vs Cu8 Copper Iodide Clusters

Copper(I) halides are well-known for their structural diversity and rich photoluminescence properties, showing great potential for the development of solid-state lighting technology. A series of four molecular copper iodide clusters based on the [Cu4I4] cubane geometry is reported. Among them, [Cu8I8] octanuclear clusters of rare geometry resulting from dimerization of the tetranuclear counterparts were also synthesized. Two different phosphine ligands were studied, bearing either a styrene or an ethyl group. Therefore, the effect of the dimerization and of the ligand nature on the photophysical properties of the resulting clusters is investigated. The structural differences were analyzed by single-crystal X-ray diffraction (SCXRD), solid-state nuclear magnetic resonance (NMR), infrared, and Raman analyses. Compared to the ethyl group, the styrene function appears to greatly impact the photophysical properties of the clusters. The luminescence thermochromic properties of the ethyl derivatives and the intriguing photophysical properties of the clusters with styrene function were rationalized by density functional theory (DFT) calculations. Thus, the styrene group significantly lowers in energy the vacant orbitals and consequently affects the global energetic layout of the clusters. From this study, it was found that the nuclearity of copper iodide clusters eventually has less influence on the photophysical properties than the nature of the ligand. The design of proper ligands should therefore be considered when developing materials for specific lighting applications.

Solvatochromic behaviour of cyclic dithioether-functionalized triphenylamine ligands and their mechano-responsive Cu(I) coordination polymers

Cu(I)-based coordination polymers (CPs) are known as efficient emissive materials providing an eco-friendly and cost-effective platform for the development of various functional materials and sensors. In addition to the nature of the metal center, organic ligands also play a crucial role in controlling the emissive properties of coordination polymers. Herein, we report on the synthesis of dithiane- and dithiolane-substituted triphenylamine ligands L1 and L2. These ligands were found to be emissive both in the solid state and in solution. In addition, these ligands exhibit solvatochromic behaviour due to the twisted intramolecular charge transfer (TICT) phenomenon. Next, coordination behaviour of these ligands was explored with Cu(I)X salts (X = Br and Cl) and four new 1D coordination polymers [{Cu(μ2-X)2Cu}(μ2-L)]n, CP1 (X = Br, L = L1), CP2 (X = Cl, L = L1), CP3 (X = Br, L = L2), and CP4 (X = Cl, L = L2) were synthesized and crystallographically characterized. The emission behaviour of all the CPs suggests ligand-centered transitions. On mechanical grinding, emission maxima (λem) for CP1 and CP2 were blue-shifted, whereas for CP3 and CP4 red-shifts were observed. All CPs were found to emit at 448 nm with increased intensity after grinding. It is supposed that grinding is responsible for a change in the spatial arrangement (dihedral angles) of the phenyl groups of triphenylamine, causing the observed emission shifts. Furthermore, the higher emission intensity after grinding suggests the occurrence of a similar phenomenon as an aggregation-induced quenching in these CPs.

Self-assembly formation of CuI hybrid micron phosphors with tunable emission for multifunctional applications

Low-cost and eco-friendly CuI hybrid compounds with various structures have recently attracted increasing attention due to their excellent optical properties and promising phosphor applications. However, the poor solubility and solution processability of bulk powders with agglomerated particle limited their practical applications greatly. In this work, we reported the self-assembly formation of CuI hybrid micron phosphors via the aqueous PVP micelle-assisted assembly route. Seven CuI hybrid micron phosphors with the emission from blue 450 nm to red 636 nm have been successfully synthesized. Among them, CuI-pyridine hybrid micron phosphors can be obtained via the reaction of CuI with various pyridines. PVP limits the size growth of the phosphors efficiently and it also plays an important role in controlling the distinct crystal phase formation. Whereas, micron phosphors based on bidentate ligands including 2-propylpyrazine, 5-bromopyrimidine or 4,4'-bipyridine need to be prepared via ligand exchange reaction. The micron phosphors present excellent stability in water and can be dispersed in the aqueous solution of PVP or PVA to form homogenous luminescent composites. The luminescent composites based on PVP are easy to use for fabricating anti-counterfeiting patterns via brush-painting or screen-printing. On the other hand, PVA composites can be applied for preparing free standing monochromatic or multichromatic emitting films as color convertor for display backlight. The PVA composites also exhibit the promising phosphor application for light-emitting diode (LED). Especially, the white LED can be directly realized via optimizing the mixing ratio of blue and orange phosphors.

Chain Length Effect on the Structural and Emission Properties of the CuI/Bis((4-methoxyphenyl)thio)alkane Coordination Polymers

A systematic chain length variation of the ligand para-MeOC₆H₄S(CH₂)_mSC₆H₄OMe (1 ≤ m ≤ 8) was performed to study its effect on the structures and photophysical properties of the coordination polymers (CP) when reacted with CuI. Indeed, direct correlations are noted between these features and m. When m is an odd number, the secondary building unit is systematically the common closed-cubane Cu₄I₄ cluster, rendering the material strongly luminescent (i.e., emission quantum yield, Φ_e > 20%), and the CP is one-dimensional (1D). However, when m is 2, 4, and 6, the SBUs exhibit rare polymeric motifs of (Cu₂I₂)_n: staircase ribbon, fused poly(rhombic pseudo-dodecahedron), and accordion ribbon, respectively, and the emission intensities are either very weak (Φ_e < 0.001%) or of medium intensity (Φ_e ∼ 10% when m = 6). When m = 8 (i.e. the most flexible chain), the SBU is a closed-cubane Cu₄I₄ and the emission intensity is medium (Φ_e ∼ 10%). A special case was observed for m = 3, where a co-crystallization of the molecular cluster Cu₄I₄(NCCH₃)₄ is observed in the lattice, which turns out to be quite important for the stability of the network.

Two new photoactive metal-organic compounds for degradation of methylene blue and treatment in ophthalmic local anesthesia

Two new metal-organic compounds, namely [Cu(CrO₄)(4,4'-bipy)(H₂O)]·n(H₂O) (1) together with [Mn(Cr₂O₇)(bpp)₂]_n (2) (4,4'-bipy is 4,4'-bipyridine and bpp is 1,3-bis(4-pyridyl)propane), were hydrothermally generated, which were characterized structurally through a series of characterization techniques. Moreover, compounds 1 and 2 have 2.95 eV and 3.02 eV of narrow optical band gap values, and possess outstanding photocatalytic effects for the methylene blue degradation under irradiation of visible light. The application of above compounds in the ophthalmic local anesthesia was examined and the specific mechanism was tested. First of all, the acetylcholine content in the synaptic cleft was measured with enzyme linked immunosorbent assay (ELISA) assay after treated with the CPs. The acetylcholine receptor relative expression on nerve cells was subsequently measured via real time reverse transcription-polymerase chain reaction (RT-PCR) under the treatment of compounds. In the end, the complexes' toxicity was evaluated by Cell Counting Kit-8 (CCK-8) detection.

Copper Iodide Clusters Coordinated by Emissive Cyanobiphenyl-Based Ligands

Copper(I) halides are currently the subject of intensive research because of their rich photophysical properties combined with economic and eco-friendly advantages for practical applications. The molecular copper iodide cluster of the general formula [Cu₄I₄L₄] (L = ligand) is a well-known photoluminescent compound, and the possibility to enlarge the panel of its photophysical properties is studied here, by exploring ligands bearing a distinct emitter. The comparative study of five copper iodide clusters coordinated by different phosphine ligands functionalized by the emissive cyanobiphenyl (CBP) group is thus described in this work. The emissive properties of the ligands have a great impact onto the photophysical properties of the cluster. Compared with classical [Cu₄I₄L₄] copper iodide clusters, the origin of the emission bands is largely modified. The CBP moiety of electron acceptor character significantly lowers in energy the vacant orbitals and consequently affects the global energetic layout. These clusters present dual emission based on two different emissive centers which interplay through energy transfer. This study demonstrates that the design of original ligands is an effective approach to enrich the photophysical properties of the appealing family of copper halide complexes.

2,2’-Ethylenebis(1,3-dithiane) as polydentate m2-, m4- and m5-assembling ligand for the construction of sulphur-rich Cu(I), Hg(II) and heterometallic Cu(I)/Hg(II) coordination polymers featuring uncommon network architectures

With the aim to elaborate novel and inexpensive sulphur-rich materials featuring unusual network architectures, the coordination chemistry of the tetradentate thiaheterocycle 1,2-di(1,3-dithian-2-yl)ethane L1 ligand toward CuX and HgX2 salts was...

Structural characterization and luminescence properties of trigonal Cu(i) iodine/bromine complexes comprising cation–π interactions

Trigonal copper(i) complexes comprising cation–π interactions achieve satisfactory photoluminescence properties.

Near-infrared emitting copper(I) complexes with a pyrazolylpyrimidine ligand: exploring relaxation pathways

Mononuclear copper(I) complexes [CuL2]I (1), [CuL2]2[Cu2I4]·2MeCN (2) and [CuL2]PF6 (3) with a new chelating pyrazolylpyrimidine ligand, 2-(3,5-dimethyl-1H-pyrazol-1-yl)-4,6-diphenylpyrimidine (L), were synthesized. In the structures of complex cations [CuL2]+, Cu+ ions coordinate...