Porous metal oxide electrocatalytic nanomaterials for energy conversion: Oxygen defects and selection techniques

Cerium-Doped Nickel Sulfide Nanospheres as Efficient Catalysts for Overall Water Splitting

The development of non-precious metal electrocatalysts with excellent activity and durability for electrochemical water splitting has always been a goal. Transition metal sulfides are attractive electrocatalysts for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). In this article, we designed and constructed efficient catalysts with multiple synergistic interactions and synthesized Ce-NiS2@NF nanosphere using a solvothermal method. Ce-NiS2@NF exhibits excellent HER performance, OER performance, and overall water splitting capability in alkaline electrolytes, demonstrating good stability. The addition of Ce influences the activity of the catalysts, attributed to the synergistic interactions creating more active sites and higher intrinsic activity through the introduction of Ce heteroatoms. Additionally, the self-supported conductive substrate promotes electron transfer, enhancing the intrinsic activity and active site density of the catalyst. This study provides an in-depth investigation into structural design and performance enhancement, offering ideas for designing efficient catalysts for overall water electrolysis. This work provides an in-depth study in terms of structural design performance enhancement and provides ideas for designing efficient alkaline bifunctional catalysts. Valuable insights have been provided in elucidating the intrinsic mechanism of the catalytic activity of cerium-doped nickel sulfide nanospheres, thus providing new guidance in the field of energy conversion technology.

Ferrocene-Boosted Nickel Sulfide Nanoarchitecture for Enhanced Alkaline Water Splitting

Enhanced electrocatalysts that are cost-effective, durable, and derived from abundant resources are imperative for developing efficient and sustainable electrochemical water-splitting systems to produce hydrogen. Therefore, the design and development of non-noble-based catalysts with more environmentally sustainable alternatives in efficient alkaline electrolyzers are important. This work reports ferrocene (Fc)-incorporated nickel sulfide nanostructured electrocatalysts (Fc-NiS) using a one-step facile solvothermal method for water-splitting reactions. Fc-NiS exhibited exceptional electrocatalytic activity under highly alkaline conditions, evident from its peak current density of 345 mA cm-2, surpassing the 153 mA cm-2 achieved by the pristine nickel sulfide (NiS) catalysts. Introducing ferrocene enhances electrical conductivity and facilitates charge transfer during water-splitting reactions, owing to the inclusion of iron metal. Fc-NiS exhibits a very small overpotential of 290 mV at 10 mA cm-2 and a Tafel slope of 50.46 mV dec-1, indicating its superior charge transfer characteristics for the three-electron transfer process involved in water splitting. This outstanding electrocatalytic performance is due to the synergistic effects embedded within the nanoscale architecture of Fc-NiS. Furthermore, the Fc-NiS catalyst also shows a stable response for the water-splitting reactions. It maintains a steady current density with an 87% retention rate for 25 hours of continuous operation, indicating its robustness and potential for prolonged electrolysis processes.

Experimental and Theoretical Investigation of Interfacial Engineering in Fe2O3/NiFe2O4 Heterostructures toward the Cycloaddition of CO2 with Styrene Oxide

The chemical fixation of CO2 into epoxides for the synthesis of cyclic carbonates is an appealing solution to both reduce global CO2 emission and produce fine chemicals, but it is still a prime challenge to develop a low-cost, earth-abundant, yet efficient solid catalyst. Herein, Fe2O3/NiFe2O4 heterostructures are facilely constructed for the highly efficient cycloaddition of CO2 with styrene oxide (SO) to produce styrene carbonate (SC). Both experimental findings and density functional theory (DFT) calculations substantiate the prominent electron transfer and charge redistribution within the heterointerfaces between the biphasic components, which induce a unique interfacial microenvironment that can facilitate the adsorption and activation of SO. This endows the biphasic catalyst with a substantially higher reactivity than the individual components. This study sheds new insights into the establishment of heterostructured catalysts consisting of transitional metal oxides for the high-efficiency production of SC from the cycloaddition of CO2 with SO.

Highly Stable and Selective Ni/ZrO2 Nanofiber Catalysts for Efficient CO2 Methanation

Ni-based oxides are promising catalysts for CO2 methanation. However, Ni-based catalysts also have some unresolved issues and drawbacks in practical applications. The activity and selectivity of Ni-based catalysts in CO2 methanation at low temperatures still need to be improved. Here, Ni/ZrO2 nanofibers with high surface areas (up to 101.2 m2/g) were prepared by electrospinning methods. The Ni/ZrO2-ES (also named as 66Ni/ZrO2) catalyst showed excellent catalytic performance in CO2 methanation (the CO2 conversion = 81% and CH4 selectivity = 99% at 350 °C) and excellent stability for 100 h, which was better than most reported Ni/ZrO2 catalysts. However, the comparison sample Ni/ZrO2-CP prepared by the coprecipitation method had poor catalytic performance (the CO2 conversion = 54% and CH4 selectivity = 90% at 350 °C). Within 100 h, the CO2 conversion decreased to 30% and the CH4 selectivity decreased to 52%. Both EPR and O1S XPS confirmed that Ni/ZrO2 nanofibers can form more reactive oxygen species vacancies, and CO2-TPD confirmed that nanofibers had more CO2 adsorption sites compared with the control sample Ni/ZrO2-CP. In situ DRIFTS analysis showed that bidentate carbonate and monodentate carbonate were key intermediates in CO2 methanation. The catalytic performance of Ni/ZrO2 nanofiber catalysts would be attributed to higher dispersion of Ni species on the surface of nanofibers, high specific surface area (101.2 m2/g), more oxygen vacancies, more CO2 adsorption sites, and the synergistic effect between Ni nanoparticles and ZrO2 nanofibers. This work may inspire the rational design of Ni/ZrO2 nanofiber catalysts with rich oxygen vacancies for low-temperature CO2 methanation.

A review on transition metal oxides in catalysis

Transition Metal Oxides (TMOs) have drawn significant attention due to their diverse range of properties and applications. The partially filled d orbitals of the transition metal ions, with highly electronegative oxygen atoms, give rise to unique electronic structures that lead to multiple applications due to their magnetic, optical, and structural properties. These properties have a direct influence on chemical reactions that enable tailoring materials for specific applications in catalysis, such as electrocatalysis and photocatalysis. While the potential of TMOs is promising, their development for enhanced functional properties poses numerous challenges. Among these challenges, identifying the appropriate synthesis processes and employing optimal characterization techniques are crucial. In this comprehensive review, an overview of recent trends and challenges in the synthesis and characterization of highly functional TMOs as well as ceramics will be covered with emphasis on catalytic applications. Mesoporous materials play a key role in augmenting their functionality for various applications and will be covered. Ab-initio modeling aspects for the design and development of novel TMO will be also discussed.

Rare-earth Element-based Electrocatalysts Designed for CO2 Electro-reduction

Electrochemical CO2 reduction presents a promising approach for synthesizing fuels and chemical feedstocks using renewable energy sources. Although significant advancements have been made in the design of catalysts for CO2 reduction reaction (CO2RR) in recent years, the linear scaling relationship of key intermediates, selectivity, stability, and economical efficiency are still required to be improved. Rare earth (RE) elements, recognized as pivotal components in various industrial applications, have been widely used in catalysis due to their unique properties such as redox characteristics, orbital structure, oxygen affinity, large ion radius, and electronic configuration. Furthermore, RE elements could effectively modulate the adsorption strength of intermediates and provide abundant metal active sites for CO2RR. Despite their potential, there is still a shortage of comprehensive and systematic analysis of RE elements employed in the design of electrocatalysts of CO2RR. Therefore, the current approaches for the design of RE element-based electrocatalysts and their applications in CO2RR are thoroughly summarized in this review. The review starts by outlining the characteristics of CO2RR and RE elements, followed by a summary of design strategies and synthetic methods for RE element-based electrocatalysts. Finally, an overview of current limitations in research and an outline of the prospects for future investigations are proposed.

RuO2 Catalysts for Electrocatalytic Oxygen Evolution in Acidic Media: Mechanism, Activity Promotion Strategy and Research Progress

Proton Exchange Membrane Water Electrolysis (PEMWE) under acidic conditions outperforms alkaline water electrolysis in terms of less resistance loss, higher current density, and higher produced hydrogen purity, which make it more economical in long-term applications. However, the efficiency of PEMWE is severely limited by the slow kinetics of anodic oxygen evolution reaction (OER), poor catalyst stability, and high cost. Therefore, researchers in the past decade have made great efforts to explore cheap, efficient, and stable electrode materials. Among them, the RuO2 electrocatalyst has been proved to be a major promising alternative to Ir-based catalysts and the most promising OER catalyst owing to its excellent electrocatalytic activity and high pH adaptability. In this review, we elaborate two reaction mechanisms of OER (lattice oxygen mechanism and adsorbate evolution mechanism), comprehensively summarize and discuss the recently reported RuO2-based OER electrocatalysts under acidic conditions, and propose many advanced modification strategies to further improve the activity and stability of RuO2-based electrocatalytic OER. Finally, we provide suggestions for overcoming the challenges faced by RuO2 electrocatalysts in practical applications and make prospects for future research. This review provides perspectives and guidance for the rational design of highly active and stable acidic OER electrocatalysts based on PEMWE.

CuO metallic aerogels with a tailored nodular morphology

This work reports, for the first time, an efficient and fast microwave-based method for the preparation of CuO aerogels. For that, CuCl2, glyoxylic acid and sodium carbonate are employed as reagents. Different experimental conditions such as synthesis temperature, synthesis time and concentration of the precursor solution are investigated to design CuO aerogels with customizable nodular morphologies. The resulting aerogels exhibit well-defined three-dimensional structures and nodular sizes, and therefore, textural properties vary according to the experimental parameters applied in their synthesis.

Tuning Oxygen Vacancies in Oxides by Configurational Entropy

Tuning surface oxygen vacancies is important for oxide catalysts. Doping elements with different chemical valence states or different atomic radii into host oxides is a common method to create oxygen vacancies. However, the concentration of oxygen vacancies in oxide catalysts is still limited to the amount of foreign dopants that can be tolerated (generally less than 10% atoms). Herein, a principle of engineering the configurational entropy to tune oxygen vacancies was proposed. First, the positive relationship between the configuration entropy and the formation energy of oxygen vacancies (Eov) in 16 model oxides was estimated by a DFT calculation. To verify this, single binary oxides and high-entropy quinary oxides (HEOs) were prepared. Indeed, the concentration of oxygen vacancies in HEOs (Oβ/α = 3.66) was higher compared to those of single or binary oxides (Oβ/α = 0.22-0.75) by O1s XPS, O2-TPD, and EPR. Interestingly, the reduction temperatures of transition metal ions in HEOs were generally lower than that in single-metal oxides by H2-TPR. The lower Eov of HEOs may contribute to this feature, which was confirmed by in situ XPS and in situ XRD. Moreover, with catalytic CO/C3H6 oxidation as a model, the high-entropy (MnCuCo3NiFe)xOy catalyst showed higher catalytic activity than single and binary oxides, which experimentally verified the hypothesis of the DFT calculation. This work may inspire more oxide catalysts with preferred oxygen vacancies.

Effective Hydrogen Production from Alkaline and Natural Seawater using WO3-x@CdS1-x Nanocomposite-Based Electrocatalysts

Offshore hydrogen production through water electrolysis presents significant technical and economic challenges. Achieving an efficient hydrogen evolution reaction (HER) in alkaline and natural seawater environments remains daunting due to the sluggish kinetics of water dissociation. To address this issue, we synthesized electrocatalytic WO3-x@CdS1-x nanocomposites (WCSNCs) using ultrasonic-assisted laser irradiation. The synthesized WCSNCs with varying CdS contents were thoroughly characterized to investigate their structural, morphological, and electrochemical properties. Among the samples tested, the WCSNCs with 20 wt % CdS1-x in WO3-x (Wx@Sx-20%) exhibited superior electrocatalytic performance for hydrogen evolution in a 1 M KOH solution. Specifically, the Wx@Sx-20% catalyst demonstrated an overpotential of 0.191 V at a current density of -10 mA/cm2 and a Tafel slope of 61.9 mV/dec. The Wx@Sx-20% catalysts demonstrated outstanding stability and durability, maintaining their performance after 24 h and up to 1000 CV cycles. Notably, when subjected to natural seawater electrolysis, the Wx@Sx-20% catalysts outperformed in terms of electrocatalytic HER activity and stability. The remarkable performance enhancement of the prepared electrocatalyst can be attributed to the combined effect of sulfur vacancies in CdS1-x and oxygen vacancies in WO3-x. These vacancies promote the electrochemically active surface area, enhance the rate of charge separation and transfer, increase the number of electrocatalytic active sites, and accelerate the HER process in alkaline and natural seawater environments.

Synergistic Effect of N-NiMoO4 /Ni Heterogeneous Interface with Oxygen Vacancies in N-NiMoO4 /Ni/CNTs for Superior Overall Water Splitting

The exploring of economical, high-efficiency, and stable bifunctional catalysts for hydrogen evolution and oxygen evolution reactions (HER/OER) is highly imperative for the development of electrolytic water. Herein, a 3D cross-linked carbon nanotube supported oxygen vacancy (V_o )-rich N-NiMoO₄ /Ni heterostructure bifunctional water splitting catalyst (N-NiMoO₄ /Ni/CNTs) is synthesized by hydrothermal-H₂ calcination method. Physical characterization confirms that V_o -rich N-NiMoO₄ /Ni nanoparticles with an average size of ≈19 nm are secondary aggregated on CNTs that form a hierarchical porous structure. The formation of Ni and NiMoO₄ heterojunctions modify the electronic structure of N-NiMoO₄ /Ni/CNTs. Benefiting from these properties, N-NiMoO₄ /Ni/CNTs drives an impressive HER overpotential of only 46 mV and OER overpotential of 330 mV at 10 mA cm^-2 , which also shows exceptional cycling stability, respectively. Furthermore, the as-assembled N-NiMoO₄ /Ni/CNTs||N-NiMoO₄ /Ni/CNTs electrolyzer reaches a cell voltage of 1.64 V at 10 mA cm^-2 in alkaline solution. Operando Raman analysis reveals that surface reconstruction is essential for the improved catalytic activity. Density functional theory (DFT) calculations further demonstrate that the enhanced HER/OER performance should be attributed to the synergistic effect of V_o and heteostructure that improve the conductivity of N-NiMoO₄ /Ni/CNTs and facilitatethe desorption of reaction intermediates.

MOF-derived transition metal-based catalysts for the electrochemical reduction of CO2 to CO: a mini review

The excessive emission of CO₂ derived from the consumption of fossil fuels has caused severe energy and environmental crises. The electrochemical reduction of CO₂ into value-added products such as CO not only reduces the CO₂ concentration in the atmosphere but also promotes sustainable development in chemical engineering. Thus, tremendous work has been devoted to developing highly efficient catalysts for the selective CO₂ reduction reaction (CO₂RR). Recently, MOF-derived transition metal-based catalysts have shown great potential for the CO₂RR due to their various compositions, adjustable structures, competitive ability, and acceptable cost. Herein, based on our work, a mini-review is proposed for an MOF-derived transition metal-based catalyst for the electrochemical reduction of CO₂ to CO. The catalytic mechanism of the CO₂RR was first introduced, and then we summarized and analyzed the MOF-derived transition metal-based catalysts in terms of MOF-derived single atomic metal-based catalysts and MOF-derived metal nanoparticle-based catalysts. Finally, we present the challenges and perspectives for the subject topic. Hopefully, this review could be helpful and instructive for the design and application of MOF-derived transition metal-based catalysts for the selective CO₂RR to CO.

Facet Engineering of Advanced Electrocatalysts Toward Hydrogen/Oxygen Evolution Reactions

The crystal facets featured with facet-dependent physical and chemical properties can exhibit varied electrocatalytic activity toward hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) attributed to their anisotropy. The highly active exposed crystal facets enable increased mass activity of active sites, lower reaction energy barriers, and enhanced catalytic reaction rates for HER and OER. The formation mechanism and control strategy of the crystal facet, significant contributions as well as challenges and perspectives of facet-engineered catalysts for HER and OER are provided.

The electrocatalytic water splitting technology can generate high-purity hydrogen without emitting carbon dioxide, which is in favor of relieving environmental pollution and energy crisis and achieving carbon neutrality. Electrocatalysts can effectively reduce the reaction energy barrier and increase the reaction efficiency. Facet engineering is considered as a promising strategy in controlling the ratio of desired crystal planes on the surface. Owing to the anisotropy, crystal planes with different orientations usually feature facet-dependent physical and chemical properties, leading to differences in the adsorption energies of oxygen or hydrogen intermediates, and thus exhibit varied electrocatalytic activity toward hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). In this review, a brief introduction of the basic concepts, fundamental understanding of the reaction mechanisms as well as key evaluating parameters for both HER and OER are provided. The formation mechanisms of the crystal facets are comprehensively overviewed aiming to give scientific theory guides to realize dominant crystal planes. Subsequently, three strategies of selective capping agent, selective etching agent, and coordination modulation to tune crystal planes are comprehensively summarized. Then, we present an overview of significant contributions of facet-engineered catalysts toward HER, OER, and overall water splitting. In particular, we highlight that density functional theory calculations play an indispensable role in unveiling the structure–activity correlation between the crystal plane and catalytic activity. Finally, the remaining challenges in facet-engineered catalysts for HER and OER are provided and future prospects for designing advanced facet-engineered electrocatalysts are discussed.

Recent Advances in Tetra- (Ti, Sn, Zr, Hf) and Pentavalent (Nb, V, Ta) Metal-Substituted Molecular Sieve Catalysis

Metal substitution of molecular sieve systems is a major driving force in developing novel catalytic processes to meet current demands of green chemistry concepts and to achieve sustainability in the chemical industry and in other aspects of our everyday life. The advantages of metal-substituted molecular sieves include high surface areas, molecular sieving effects, confinement effects, and active site and morphology variability and stability. The present review aims to comprehensively and critically assess recent advances in the area of tetra- (Ti, Sn, Zr, Hf) and pentavalent (V, Nb, Ta) metal-substituted molecular sieves, which are mainly characterized for their Lewis acidic active sites. Metal oxide molecular sieve materials with properties similar to those of zeolites and siliceous molecular sieve systems are also discussed, in addition to relevant studies on metal-organic frameworks (MOFs) and some composite MOF systems. In particular, this review focuses on (i) synthesis aspects determining active site accessibility and local environment; (ii) advances in active site characterization and, importantly, quantification; (iii) selective redox and isomerization reaction applications; and (iv) photoelectrocatalytic applications.