Complexes of metals with organotellurium compounds and nanosized metal tellurides for catalysis, electrocatalysis and photocatalysis

Interface-Engineered CuxO@Bi2MoO6 Heterojunctions to Inhibit Piezoelectric Screening Effect and Promote Double-Nanozyme Catalysis for Antibacterial Treatment

Sonodynamic therapy is confronted with the low acoustic efficiency of sonosensitizers, and nanozymes are accompanied by intrinsic low catalytic activity. Herein, to increase the piezopotential of N-type piezoelectric semiconductors, the P-N heterojunction is designed to inhibit the piezoelectric screening effect (PSE) and increase electron utilization efficiency to enhance nanozyme activity. P-type CuxO nanoparticles are in situ grown on N-type piezoelectric Bi2MoO6 (BMO) nanoflakes (NFs) to construct heterostructured CuxO@BMO by interface engineering. CuxO deposition leads to lattice distortion of BMO NFs to improve piezoelectric response, and the strong interface electric field (IEF) suppresses PSE and increases piezopotential. The nonlocal piezopotential, local IEF, and glutathione (GSH) inoculation enhances electron-hole separation and increases peroxidase (POD)-like activity of BMO and GSH oxidase (GSHOx)-like activity of CuxO with high selectivity. The heterojunction formation causes the transfer and rearrangement of interface electrons, and the increased piezopotential accelerates electron transfer at interfaces with bacteria, thus increasing the production of reactive oxidative species and interfering with adenosine triphosphate synthesis. The heterostructured nanozymes produce abundant intracellular ·OH and achieve 4log magnitude reductions in viable bacteria and effective biofilm dispersion. This study elucidates integral mechanisms of nanozyme and acoustic catalysis and opens up a new way to synergize high piezopotential and nanozyme-catalyzed therapy.

Click Chemistry for the Generation of Combination of Triazole Core and Thioether Donor Site in Organosulfur Ligands: Applications of Metal Complexes in Catalysis

During the last two decades, organosulfur compounds have been used in the field of transition metal catalysis. Some of such compounds are known for their ability to withstand their exposure to air and moisture. These compounds are very important ligands. They may be obtained using simple and smooth modular synthetic protocols which include nucleophilic substitution reactions. The development of click chemistry represents a new era of innovation. It is a lighthouse of reliable and efficient reactions. In recent past, click chemistry has also been applied for the synthesis of such organosulfur ligands specifically suited for the dynamic field of transition metal catalysis. In order to synthesize novel compounds containing sulfur and triazole ring, click chemistry is an advantageous methodology over other approaches. This article covers the general features and uses of this methodology for the development of catalytically active organosulfur compounds. The significant advances in the design of transition metal catalytic systems utilizing such ligands, their use in the catalysis of many chemical transformations are also covered in this article. Effort has also been made to present a comparative overview of the performances of such catalysts vis-à-vis the catalysts designed commonly used ligands. Catalytic performances have been discussed thoroughly in order to identify the impact of ligand architecture on efficacy of the catalyst. Effect of reaction conditions (such as time, temperature etc.) and mechanistic aspects have also been rationalized.

Catalytic system having an organotellurium ligand on graphene oxide: immobilization of Pd(0) nanoparticles and application in heterogeneous catalysis of cross-coupling reactions

First heterogeneous catalytic system, having a covalently linked hybrid bidentate organotellurium ligand [i.e., PhTe-CH2-CH2-NH2] on the surface of graphene oxide, has been synthesized with immobilized and stabilized Pd(0) nanoparticles. To the best of our knowledge, it is the first such catalytic system in which a heterogenized organotellurium ligand has been used. It has been well-characterized using different physicochemical characterization techniques viz. P-XRD, XPS, HR-TEM, EELS, FE-SEM, EDX, TGA, BET surface area analysis, FT-IR spectroscopy, and Raman spectroscopy. The Pd content of the final system has been quantified using ICP-OES. Its applications have been explored in Suzuki-Miyaura C-C cross coupling and C-O cross coupling reactions. Hot filtration experiments corroborate the heterogeneous nature of the catalysis. It is recyclable for up to five reaction cycles in Suzuki-Miyaura and C-O cross coupling with marginal loss in performance. It also catalyzes the reactions of chloroarenes such as chlorobenzene, 4-chloroaniline, 1-chloro-4-nitrobenzene, 4-chloroacetophenone, 4-chlorobenzophenone for Suzuki coupling, and 1-chloro-4-nitrobenzene, 4-chlorobenzonitrile, chlorobenzene, and 4-chlorotoluene for C-O coupling. P-XRD, FE-SEM, and EDX study reveals that the catalytic system retains its structural originality and functionality after recycling.

Organosulphur and organoselenium compounds as ligands for catalytic systems in the Sonogashira coupling

Sonogashira coupling is a reaction of aryl/vinyl halides with terminal alkynes. It is used for the synthesis of conjugated enynes. Generally, copper (Cu) is required as a mediator for this reaction. It requires a long reaction time, high catalyst loading, or expensive ligands. Recently, homogeneous, heterogeneous, and nanocatalysts have been developed using organosulphur and organoselenium compounds as building blocks. Preformed complexes of metals with organosulphur and organoselenium ligands are used for homogeneous catalysis. Heterogeneous catalytic systems have also been developed using Cu, Pd, and Ni as metals. The nanocatalytic systems (synthesized using such ligands) include copper selenides and stabilized palladium(0) nanospecies. This article aims to cover the developments in the field of the processes and techniques used so far to generate catalytically relevant organic ligands having sulphur or selenium donor sites, the utility of such ligands in the syntheses of homogeneous, heterogeneous, and nanocatalytic systems, and critical analysis of their application in the catalysis of this coupling reaction. The results of catalysis are analyzed in terms of the effects of the S/Se donor, halogen atom of aryl halide, the effect of the presence/absence of electron-withdrawing or electron-donating groups or substituents on the aromatic ring of haloarenes/substituted phenylacetylenes, as well as the position (ortho or para) of the substitution. Substrate scope is discussed for all the kinds of catalysis. The supremacy of heterogeneous and nanocatalytic systems indicates promising future prospects.

Transition-Metal-Based Nanozymes: Synthesis, Mechanisms of Therapeutic Action, and Applications in Cancer Treatment

Cancer, as one of the leading causes of death worldwide, drives the advancement of cutting-edge technologies for cancer treatment. Transition-metal-based nanozymes emerge as promising therapeutic nanodrugs that provide a reference for cancer therapy. In this review, we present recent breakthrough nanozymes for cancer treatment. First, we comprehensively outline the preparation strategies involved in creating transition-metal-based nanozymes, including hydrothermal method, solvothermal method, chemical reduction method, biomimetic mineralization method, and sol-gel method. Subsequently, we elucidate the catalytic mechanisms (catalase (CAT)-like activities), peroxidase (POD)-like activities), oxidase (OXD)-like activities) and superoxide dismutase (SOD)-like activities) of transition-metal-based nanozymes along with their activity regulation strategies such as morphology control, size manipulation, modulation, composition adjustment and surface modification under environmental stimulation. Furthermore, we elaborate on the diverse applications of transition-metal-based nanozymes in anticancer therapies encompassing radiotherapy (RT), chemodynamic therapy (CDT), photodynamic therapy (PDT), photothermal therapy (PTT), sonodynamic therapy (SDT), immunotherapy, and synergistic therapy. Finally, the challenges faced by transition-metal-based nanozymes are discussed alongside future research directions. The purpose of this review is to offer scientific guidance that will enhance the clinical applications of nanozymes based on transition metals.

Subtle 2D/2D MXene-Based Heterostructures for High-Performance Electrocatalytic Water Splitting

Developing efficient electrocatalysts is significant for the commercial application of electrocatalytic water splitting. 2D materials have presented great prospects in electrocatalysis for their high surface-to-volume ratio and tunable electronic properties. Particularly, MXene emerges as one of the most promising candidates for electrocatalysts, exhibiting unique advantages of hydrophilicity, outstanding conductivity, and exceptional stability. However, it suffers from lacking catalytic active sites, poor oxidation resistance, and easy stacking, leading to a significant suppression of the catalytic performance. Combining MXene with other 2D materials is an effective way to tackle the aforementioned drawbacks. In this review, the focus is on the accurate synthesis of 2D/2D MXene-based catalysts toward electrocatalytic water splitting. First, the mechanisms of electrocatalytic water splitting and the relative properties and preparation methods of MXenes are introduced to offer the basis for accurate synthesis of 2D/2D MXene-based catalysts. Then, the accurate synthesis methods for various categories of 2D/2D MXene-based catalysts, such as wet-chemical, phase-transformation, electrodeposition, etc., are systematically elaborated. Furthermore, in-depth investigations are conducted into the internal interactions and structure-performance relationship of 2D/2D MXene-based catalysts. Finally, the current challenges and future opportunities are proposed for the development of 2D/2D MXene-based catalysts, aiming to enlighten these promising nanomaterials for electrocatalytic water splitting.

Synthesis of MnOOH and its application in a supporting hexagonal Pd/C catalyst for the oxygen reduction reaction

With the expansion of global energy problems and the deepening of research on oxygen reduction reaction (ORR) in alkaline media, the development of low cost and high electrocatalytic performance catalysts has become a research hotspot. In this study, a hexagonal Pd-C-MnOOH composite catalyst was prepared by using the triblock copolymer P123 as the reducing agent and protective agent, sucrose as the carbon source and self-made MnOOH as the carrier under hydrothermal conditions. When the Pd load is 20% and the C/MnOOH ratio is 1 : 1, the 20% Pd-C-MnOOH-1 : 1 catalyst obtained by the one-step method has the highest ORR activity and stability in the alkaline system. At 1600 rpm, the limiting diffusion current density and half-wave potential of the 20% Pd-C-MnOOH-1 : 1 electrocatalyst are -4.78 mA cm-2 and 0.84 V, respectively, which are better than those of the commercial 20%Pd/C catalyst. According to the Koutecky-Levich (K-L) equation and the linear fitting results, the electron transfer number of the 20%Pd-C-MnOOH-1 : 1 electrocatalyst for the oxygen reduction reaction is 3.8, which is similar to that of a 4-electron process. After 1000 cycles, the limiting diffusion current density of the 20%Pd-C-MnOOH-1 : 1 catalyst is -4.61 mA cm-2, which only decreases by 3.7%, indicating that the 20%Pd-C-MnOOH-1 : 1 catalyst has good stability. The reason for the improvement of the ORR performance of the Pd-C-MnOOH composite catalyst is the improvement of the conductivity of the carbon layer formed by original carbonization, the regular hexagonal highly active Pd particles and the synergistic catalytic effect between Pd and MnOOH. The method of introducing triblock copolymers in the synthesis of oxides and metal-oxide composite catalysts is expected to be extended to other electrocatalysis fields.

N-Coordinated tellurenium(II) and telluronium(IV) cations: synthesis, structure and hydrolysis

A set of N-coordinated tellurium(II) compounds containing either C,N-chelating ligands CNR (where CN = 2-(RNCH)C6H4, R = tBu or Dipp; Dipp = 2,6-iPr2C6H3) or N,C,N pincer ligands NCNR (where NCN = 2,6-(RNCH)2C6H4, R = tBu or Dipp) were synthesized. In the case of C,N-chelated compounds, the reaction of CNDippLi with Te(dtc)2 (where dtc = Et2NCS2) in a 1 : 1 molar ratio smoothly provided the carbamate CNDippTe(dtc) which upon treatment with 2 eq. of HCl provided the chloride CNDippTeCl. In contrast, the analogous conversion of NCNRLi with Te(dtc)2 surprisingly furnished ionic bromides [NCNRTe]Br as a result of the exchange of dtc by Br coming from nBuBr present in the reaction mixture. Furthermore, the reaction of CNDippTeCl or [NCNRTe]Br with silver salts AgX (X = OTf or SbF6) provided the expected tellurenium cations [CNDippTe]SbF6 and [NCNRTe]X. To further increase the Lewis acidity of the central atom, the oxidation of selected compounds with 1 eq. of SO2Cl2 was examined yielding stable compounds [CNtBuTeCl2]X and [NCNtBuTeCl2]X. The oxidation of the Dipp substituted compounds proved to be more challenging and an excess of SO2Cl2 was necessary to obtain the oxidized products [CNDippTeCl2]SbF6 and [NCNDippTeCl2]SbF6, which could solely be characterized in solution. Compounds [CNtBuTeCl2]OTf and [NCNtBuTeCl2]OTf were shown to undergo a controlled hydrolysis to the corresponding telluroxanes. All compounds were studied by multinuclear NMR spectroscopy in solution and for selected compounds solid state 125Te NMR spectroscopy and single-crystal X-ray diffraction analysis were performed. The Lewis acidity of the studied cations was examined by the Gutmann-Beckett method using Et3PO as the probing agent. The Te-N chalcogen bonding situation of selected compounds has also been examined computationally by a set of real-space bonding indicators.

A cobalt metalized polymer modulates the electronic structure of Pt nanoparticles to accelerate water dissociation kinetics

Herein, we construct a composite material of Pt-NPs@NPCNs-Co by anchoring Pt nanoparticles (Pt NPs) and Co-salen covalent organic polymer (Co-COP) onto N, P co-doped carbon nanotubes (NPCNs), thereby offering an integrated approach to enhance H₂O dissociation. The bimetallic catalyst Pt-NPs@NPCNs-Co demonstrates exceptional HER performance, and the overpotential at 40 mA cm^-2 is lower than that of 20% Pt/C. When the overpotential is 50 mV, the mass activity of Pt-NPs@NPCNs-Co is 2.8 times that of the commercial Pt/C catalyst. Experimental results reveal that the synergistic interplay between Pt NPs and Co contributes to the excellent electrocatalytic performance observed. Density function theory calculations found that Co effectively modulates the electronic structure of Pt NPs and lowers the activation energy of the Volmer step, thereby accelerating the water dissociation kinetics of Pt NPs. This research contributes to the advancement of knowledge regarding the development of more efficient bimetallic co-catalytic electrocatalysts in alkaline media.

Transition metal chalcogenides carbon-based as bifunctional cathode electrocatalysts for rechargeable zinc-air battery: An updated review

The rechargeable alkaline aqueous zinc-air batteries (ZABs) are prospective candidates to supply the energy demand for their high theoretical energy density, inherent safety, and environmental friendliness. However, their practical application is mainly restricted by the unsatisfactory efficiency of the air electrode, leading to an intense search for high-efficient oxygen electrocatalysts. In recent years, the composites of carbon materials and transition metal chalcogenides (TMC/C) have emerged as promising alternatives because of the unique properties of these single compounds and the synergistic effect between them. In this sense, this review presented the electrochemical properties of these composites and their effects on the ZAB performance. The operational fundamentals of the ZABs were described. After elucidating the role of the carbon matrix in the hybrid material, the latest developments in the ZAB performance of the monometallic structure and spinel of TMC/C were detailed. In addition, we report topics on doping and heterostructure due to the large number of studies involving these specific defects. Finally, a critical conclusion and a brief overview sought to contribute to the advancement of TMC/C in the ZABs.

Dependence of Transition-Metal Telluride Phases on Metal Precursor Reactivity and Mechanistic Implications

Modern bottom-up synthesis to nanocrystalline solid-state materials often lacks the reasoned product control that molecular chemistry boasts from having over a century of research and development. In this study, six transition metals including iron, cobalt, nickel, ruthenium, palladium, and platinum were reacted with the mild reagent didodecyl ditelluride in their acetylacetonate, chloride, bromide, iodide, and triflate salts. This systematic analysis demonstrates how rationally matching the reactivity of metal salts to the telluride precursor is necessary for the successful production of metal tellurides. The trends in reactivity suggest that radical stability is the better predictor of metal salt reactivity than hard-soft acid-base theory. Of the six transition-metal tellurides, the first colloidal syntheses of iron and ruthenium tellurides (FeTe₂ and RuTe₂) are reported.

Organosulphur and organoselenium compounds as emerging building blocks for catalytic systems for O-arylation of phenols, a C-O coupling reaction

Diaryl ethers form an important class of organic compounds. The classic copper-mediated Ullmann diaryl ether synthesis has been known for many years and involves the coupling of phenols with aryl halides. However, the use of high reaction temperature, high catalyst loading and expensive ligands has created a need for the development of alternative catalytic systems. In the recent past, organosulphur and organoselenium compounds have been used as building blocks for developing homogeneous, heterogeneous and nanocatalysts for this C-O coupling reaction. Homogeneous catalytic systems include preformed complexes of metals with organosulphur and organoselenium ligands. The performance of such complexes is influenced dramatically by the nature of the chalcogen (S or Se) donor site of the ligand. Nanocatalytic systems (including Pd₁₇Se₁₅, Pd₁₆S₇ and Cu_1.8S) have been designed using a single-source precursor route. Heterogeneous catalytic systems contain either metal (Cu or Pd) or metal chalcogenides (Pd₁₇Se₁₅ or Cu_1.8S) as catalytically active species. This article aims to cover the simple and straightforward methodologies and approaches that are adopted for developing catalytically relevant organosulfur and organoselenium ligands, their homogeneous metal complexes, heterogeneous and nanocatalysts. The effects of chalcogen (S or Se) donor, halogen (Cl/Br/I) of aryl halide, nature (electron withdrawing or electron donating) of substituents present on the aromatic ring of aryl halides or substituted phenols and position (ortho or para) of substitution on the results of catalytic reactions have been critically analyzed and summarized. The effect of composition (Pd₁₇Se₁₅ or Pd₁₆S₇) on the performance of nanocatalytic systems is also highlighted. Substrate scope has also been discussed in all three types of catalysis. The superiority of heterogeneous catalytic systems (e.g., Pd₁₇Se₁₅ immobilised on graphene oxide) indicates the bright future possibilities for the development of efficient catalytic systems using similar or tailored ligands for this reaction.

Functionalization of graphene oxide with a hybrid P, N ligand for immobilizing and stabilizing economical and non-toxic nanosized CuO: an efficient, robust and reusable catalyst for the C–O coupling reaction in O-arylation of phenol

A new graphene oxide based heterogeneous catalytic system holding CuO nanoparticles through P and N donor sites for the C–O coupling reaction.

Click chemistry in the synthesis of catalytically relevant organoselenium compounds: development and applications of catalysts for organic synthesis

Use of click chemistry in synthesizing organoselenium compounds and the applications of metal complexes of such compounds as catalysts for various chemical transformations have been critically analyzed.