Layered bismuth-based photocatalysts

DFT and experimental studies of the facet-dependent oxygen vacancies modulated WS2/BiOCl-OV S-scheme structure for enhanced photocatalytic removal of ciprofloxacin from wastewater

The present study explores visible light-assisted photodegradation of ciprofloxacin hydrochloride (CIP) antibiotic as a promising solution to water pollution. The focus is on transforming the optical and electronic properties of BiOCl through the generation of oxygen vacancies (OVs) and the exposure of (110) facets, forming a robust S-scheme heterojunction with WS2. The resultant OVs mediated composite with an optimal ratio of WS2 and BiOCl-OV (4-WS2/BiOCl-OV) demonstrated remarkable efficiency (94.3%) in the visible light-assisted photodegradation of CIP antibiotic within 1.5 h. The CIP degradation using 4-WS2/BiOCl-OV followed pseudo-first-order kinetics with the rate constant of 0.023 min-1, outperforming bare WS2, BiOCl, and BiOCl-OV by 8, 6, and 4 times, respectively. Density functional theory (DFT) analysis aligned well with experimental results, providing insights into the structural arrangement and bandgap analysis of the photocatalysts. Liquid chromatography-mass spectrometry (LC-MS) analysis utilized for identifying potentially degraded products while scavenging experiments and electron paramagnetic resonance (EPR) spin trapping analysis elucidated the S-scheme charge transfer mechanism. This research contributes to advancing the design of oxygen vacancy-mediated S-scheme systems in the realm of photocatalysis, with potential implications for addressing water pollution concerns.

Resource utilization of MSWI fly ash supporting TiO2/BiOCl nanocomposite for enhanced photocatalytic degradation of sodium isopropyl xanthate: Mechanism and performance evaluation

The removal of organic pollutants in water environments and the resource utilization of solid waste are two pressing issues around the world. Facing the increasing pollution induced by discharge of mining effluents containing sodium isopropyl xanthate (SIPX), in this work, municipal solid waste incineration fly ash (MSWI FA) was pretreated by hydrothermal method to produce stabilized FA, which was then innovatively used as support for the construction of FA/TiO2/BiOCl nanocomposite (FTB) with promoted photocatalytic activity under visible light and natural sunlight. When the content of FA was 20 wt% and the mass ratio of TiO2 to BiOCl was 4:6, a remarkable performance for the optimal FTB (20-FTB-2) was achieved. Characterizations demonstrated that TiO2 and BiOCl uniformly dispersed on FA contributing to high surface area and broad light adsorption of FTB, which exhibits excellent adsorption capacity and light response ability. Build in electric field formed in the interface of TiO2/BiOCl heterojunction revealed by density functional theory calculations accelerated the separation of photoinduced e- and h+, leading to high efficiency for SIPX degradation. The synergetic effect combined with adsorption and photocatalytic degradation endowed 20-FTB-2 superior SIPX removal efficiency over 99% within 30 min under visible light and natural sunlight irradiation. The photocatalytic degradation pathways of SIPX were determined through theoretical calculations and characterizations, and the toxic byproduct CS2 was effectively eliminated through oxidation of •O2-. For 20-FTB-2, reusability of photocatalyst was showed by cycle tests, also the concentrations of main heavy metals (Pb, Zn, Cu, Cr, and Cd) in the liquid phases released during photocatalyst preparation process (< 1 mg/L) and photodegradation process (< 8.5 μg/L) proved the satisfactory stability with low toxicity. This work proposed a novel strategy to develop efficient and stable support-based photocatalysts by utilizing MSWI FA and realize its resource utilization.

Preparation of Novel Layered High Entropy Bismuth-Based Materials and their Photocatalytic Degradation Mechanism

We prepared BiOCl, BiO(ClBr), BiO(ClBrI), and BiO[ClBrI(CO3)0.5] materials using a simple coprecipitation method. It was found that adjusting the number of anions in the anion layer was conducive to adjusting the band structure of BiOX and could effectively promote the migration and separation of photogenerated carriers, thus improving the photocatalytic activity. We first selected methyl orange (MO) as the study pollutant and compared it with BiOCl, BiO(ClBr), and BiO(ClBrI). The first-order kinetic constants of MO degradation by BiO[ClBrI(CO3)0.5] increased by 90.3, 33.9, and 3.1 times, respectively. The photocatalytic degradation rate of methylene blue by BiO[ClBrI(CO3)0.5] was 89.5%, indicating the excellent photocatalytic performance of BiO[ClBrI(CO3)0.5]. The stability of BiO[ClBrI(CO3)0.5] was demonstrated through cyclic experiments and XRD analysis before and after the reaction. The photocatalytic degradation of MO by BiO[ClBrI(CO3)0.5] showed that h+ and 1O2 were the main active oxidizing species and •O2- was the secondary active substance. Overall, our work provides new ideas for the synthesis and degradation of organic pollutants by using two-dimensional anionic high-entropy materials.

Chitosan synergizes with bismuth-based metal-organic frameworks to construct double S-type heterojunctions for enhancing photocatalytic antimicrobial activity

In recent years, photocatalytic technology has been introduced to develop a new kind antimicrobial agents fighting antibiotic abusing and related drug resistance. The efforts have focused on non-precious metal photocatalysts along with green additives. In the present work, a novel bis-S heterojunctions based on the coupling of polysaccharide (CS) and bismuth-based MOF (CAU-17) s synthesized through a two-step method involving amidation reaction under mild conditions. The as prepared photocatalyst literally extended the light response to the near-infrared region. Owing to its double S-type heterostructure, the lifetime of the photocarriers is significantly prolonged and the redox capacity are enhanced. As a result, the as prepared photocatalyst indicated inhibition up to 99.9 % under 20 min of light exposure against Gram-positive (S. aureus) and Gram-negative (E. coli) bacteria as well as drug-resistant bacteria (MRSA). The outstanding photocatalytic performance is attributed to the effective charge separation and migration due to the unique double S heterostructure. Such a double S heterostructure was confirmed through transient photocurrent response, electrochemical impedance spectroscopy tests and electron spin resonance measurements. The present work provides a basis for the simple synthesis of high-performance heterojunction photocatalytic inhibitors, which extends the application of CAU-17 in environmental disinfection and wastewater purification.

Defect Engineering of Bi2 WO6 for Enhanced Photocatalytic Degradation of Antibiotic Pollutants

Infiltration of excessive antibiotics into aquatic ecosystems plays a significant role in antibiotic resistance, a major global health challenge. It is therefore critical to develop effective technologies for their removal. Herein, defect-rich Bi2 WO6 nanoparticles are solvothermally prepared via epitaxial growth on pristine Bi2 WO6 seed nanocrystals, and the efficiency of the photocatalytic degradation of ciprofloxacin, a common antibiotic, is found to increase markedly from 62.51% to 98.27% under visible photoirradiation for 60 min. This is due to the formation of a large number of structural defects, where the synergistic interactions between grain boundaries and adjacent dislocations and oxygen vacancies lead to an improved separation and migration efficiency of photogenerated carriers and facilitate the adsorption and degradation of ciprofloxacin, as confirmed in experimental and theoretical studies. Results from this work demonstrate the unique potential of defect engineering for enhanced photocatalytic performance, a critical step in removing antibiotic contaminants in aquatic ecosystems.

Triggering Dual Two-electron Pathway for H2 O2 Generation by Multiple [Bi-O]n Interlayers in Ultrathin Bi12 O17 Cl2 towards Efficient Piezo-self-Fenton Catalysis

Piezo-self-Fenton system (PESF) has been emerging as a promising water treatment technology but suffering from unsatisfied H2 O2 production efficiency. Herein, we rationally design a Bi12 O17 Cl2 piezo-catalyst with multiple [Bi-O]n interlayers towards highly efficient H2 O2 production. The introduction of [Bi3 O4.25 ] layers initiates dual two-electron pathway for H2 O2 generation by altering the interlayer properties. It is found that the additional [Bi3 O4.25 ] layers not only enhance the polarization electric field but also serve as active sites for triggering dual pathways of two-electron O2 reduction and H2 O oxidation reaction for H2 O2 production. Therefore, the Bi12 O17 Cl2 exhibits an ultrahigh rate of H2 O2 generation (7.76 mM h-1  g-1 ) in pure water. Based on the adequate H2 O2 yield, a PESF was constructed for acetaminophen (ACE) degradation with an apparent rate constant of 0.023 min-1 . This work not only presents a potential strategy of tuning the activity of bismuth based piezo-catalysts but also provides a good example on the construction of highly efficient PESF for environmental remediation by using natural mechanical energy.

Unraveling Synergistic Effect of Defects and Piezoelectric Field in Breakthrough Piezo-Photocatalytic N2 Reduction

Piezo-photocatalysis is a frontier technology for converting mechanical and solar energies into crucial chemical substances and has emerged as a promising and sustainable strategy for N2 fixation. Here, for the first time, defects and piezoelectric field are synergized to achieve unprecedented piezo-photocatalytic nitrogen reduction reaction (NRR) activity and their collaborative catalytic mechanism is unraveled over BaTiO3 with tunable oxygen vacancies (OVs). The introduced OVs change the local dipole state to strengthen the piezoelectric polarization of BaTiO3 , resulting in a more efficient separation of photogenerated carrier. Ti3+ sites adjacent to OVs promote N2 chemisorption and activation through d-π back-donation with the help of the unpaired d-orbital electron. Furthermore, a piezoelectric polarization field could modulate the electronic structure of Ti3+ to facilitate the activation and dissociation of N2 , thereby substantially reducing the reaction barrier of the rate-limiting step. Benefitting from the synergistic reinforcement mechanism and optimized surface dynamics processes, an exceptional piezo-photocatalytic NH3 evolution rate of 106.7 µmol g-1  h-1 is delivered by BaTiO3 with moderate OVs, far surpassing that of previously reported piezocatalysts/piezo-photocatalysts. New perspectives are provided here for the rational design of an efficient piezo-photocatalytic system for the NRR.

Construction of Z-scheme AgCl/BiOCl heterojunction with oxygen vacancies for improved pollutant degradation and bacterial inactivation

A facile Z-scheme AgCl/BiOCl heterojunction photocatalyst with oxygen vacancies was fabricated by a water-bath method. The structural, morphological, optical and electronic properties of as-synthesized samples were systematically characterized. The oxygen vacancies were confirmed by EPR, which could optimize the band-gap of the AgCl/BiOCl heterojunction and improve the photo-induced electron transfer. The optimized AgCl/BiOCl heterojunction showed excellent photocatalytic degradation efficiency (82%) for tetracycline (TC). Simultaneously, E. coli was completely inactivated within 60 min due to the AgCl/BiOCl heterojunction. The elevated catalytic activity of the optimal AgCl/BiOCl heterojunction was ascribed to the synergistic effect of the enhanced light absorption and effective photoinduced charge carrier separation and transfer. Moreover, the degradation efficiency of the AgCl/BiOCl heterojunction towards ofloxacin, norfloxacin and Lanasol Red 5B was 73%, 74% and 96%, respectively. The experimental factors for the degradation efficiency of TC were also studied. Furthermore, active species trapping experiments indicated that superoxide radicals (˙O2-) were the main reactive species, and the Z-scheme charge transfer mechanism helped to improve the photocatalytic activity.

Near infrared emissions from both high efficient quantum cutting (173%) and nearly-pure-color upconversion in NaY(WO4)2:Er3+/Yb3+ with thermal management capability for silicon-based solar cells

Raising photoelectric conversion efficiency and enhancing heat management are two critical concerns for silicon-based solar cells. In this work, efficient Yb3+ infrared emissions from both quantum cutting and upconversion were demonstrated by adjusting Er3+ and Yb3+ concentrations, and thermo-manage-applicable temperature sensing based on the luminescence intensity ratio of two super-low thermal quenching levels was discovered in an Er3+/Yb3+ co-doped tungstate system. The quantum cutting mechanism was clearly decrypted as a two-step energy transfer process from Er3+ to Yb3+. The two-step energy transfer efficiencies, the radiative and nonradiative transition rates of all interested 4 f levels of Er3+ in NaY(WO4)2 were confirmed in the framework of Föster-Dexter theory, Judd-Ofelt theory, and energy gap law, and based on these obtained efficiencies and rates the quantum cutting efficiency was furthermore determined to be as high as 173% in NaY(WO4)2: 5 mol% Er3+/50 mol% Yb3+ sample. Strong and nearly pure infrared upconversion emission of Yb3+ under 1550 nm excitation was achieved in Er3+/Yb3+ co-doped NaY(WO4)2 by adjusting Yb3+ doping concentrations. The Yb3+ induced infrared upconversion emission enhancement was attributed to the efficient energy transfer 4I11/2 (Er3+) + 2F7/2 (Yb3+) → 4I15/2 (Er3+) + 2F5/2 (Yb3+) and large nonradiative relaxation rate of 4I9/2. Analysis on the temperature sensing indicated that the NaY(WO4)2:Er3+/Yb3+ serves well the solar cells as thermos-managing material. Moreover, it was confirmed that the fluorescence thermal quenching of 2H11/2/4S3/2 was caused by the nonradiative relaxation of 4S3/2. All the obtained results suggest that NaY(WO4)2:Er3+/Yb3+ is an excellent material for silicon-based solar cells to improve photoelectric conversion efficiency and thermal management.

Enhanced generation of oxysulfur radicals by the BiOBr/Montmorillonite activated sulfite system: Performance and mechanism

The easily synthesized, cost-effective, and stable photocatalysts for sulfite activation are always required for the enhancement of organic contaminants degradation. Herein, the facile coprecipitation synthesis of Bismuth oxybromide (BiOBr)/Montmorillonite (MMT) was reported, which could activate sulfite (SO32-/HSO3-) under sunlight and accelerate the catalytic performance more effectively than pristine BiOBr. After adding sulfite to the photocatalysis system, the photodegradation efficiency of atrazine (ATZ) achieved 73.7% ± 1.5% after 5 min and 94.4% ± 1.6% after 30 min of sunlight irradiation with BiOBr/MMT. The BiOBr/MMT-sulfite system also presented remarkable photocatalytic performance to eliminate various contaminants, including ciprofloxacin, sulfadiazine, tetracycline, and carbamazepine. The various features of the photocatalyst materials were studied, including their surface morphology, structure, optical properties, and composition. The results illustrated that by adding MMT, the bandgap of the pristine BiOBr was reduced and the surface area was increased, which led to an increased ability to adsorb materials. Results of various influence factors showed this enhanced system had satisfactory and stable removal performance of ATZ in the pH range of 3.0-6.5, but HPO42- had a strong negative effect on the system performance. Oxysulfur radicals (SO5·- and SO4·-), h+, and 1O2 were discovered as the prevailing active species in the BiOBr/MMT-sulfite system. The proposed degradation mechanism of this photocatalyst-enhanced system revealed that sulfite adsorption on the surface of the photocatalyst played a vital role during the initial phase, and the degradation pathway of ATZ was discussed. This study provides a new synthesis strategy of a photocatalyst for sulfite activation and expands the potential uses of Bi-based photocatalysts in degrading difficult-to-remove organic pollutants.

Recent Advances on Single-Atom Catalysts for Photocatalytic CO2 Reduction

The present energy crisis and environmental challenges may be efficiently resolved by converting carbon dioxide (CO2 ) into various useful carbon products. The development of more effective catalysts has been the main focus of current research on photocatalytic CO2 reduction. Due to their high atomic efficiency and superior catalytic activity, single-atom catalysts (SACs) have attracted considerable interest in catalytic CO2 conversion. This review discusses the current research developments, obstacles, and potential of SACs for photocatalytic CO2 reduction. And further, discusses the principle of photocatalytic carbon dioxide reduction. This work has compared and analyzed the effects of support materials and active site types in SACs on photocatalytic CO2 reduction performance. This work believes that by sharing these developments, some inspiration for the rational design and development of stable and effective photocatalytic CO2 reduction catalysts based on SACs can be provided.

Aurivillius-layered Bi2WO6 nanoplates with CoOx cocatalyst as high-performance piezocatalyst for hydrogen evolution

Developing a high-performance piezocatalyst that directly transforms mechanical energy into hydrogen is highly desirable in the field of new energy. Herein, the Aurivillius-layered Bi2WO6 (BWO) nanoplates are prepared through a hydrothermal reaction at a moderate temperature of 160 °C, and exhibit strong piezoelectric properties, enabling them to catalyze water splitting through ultrasonic-induced piezocatalysis effect. The hydrogen evolution reaction (HER) and H2O2 generation efficiencies are measured to be 0.43 and 0.36 mmol g-1 h-1, respectively. To further boost piezocatalytic performance, cobalt oxide nanoparticles are intentionally photo-deposited onto these nanoplates as cocatalyst. This configuration results in a significantly boosted HER performance with an efficiency of 3.59 mmol g-1 h-1, which is 2.8 times higher than that of pristine nanoplates and demonstrates strong competitiveness compared to other reported piezocatalysts. The cobalt oxide cocatalyst plays a crucial role in facilitating efficient charge separation and migration, increasing the charge concentration, and ultimately enhancing piezocatalytic HER activity. Overall, this work highlights the potential of Aurivillius-layered bismuth oxide compounds as efficient piezocatalysts and provides valuable insights for designing high-performance piezocatalysts in the field of new energy.

Piezo-photocatalytic properties of BaTiO3/CeO2 nanoparticles with heterogeneous structure synthesized by a gel-assisted hydrothermal method

BaTiO3/CeO2 nanoparticles with heterogeneous structure were successfully synthesized via a gel-assisted hydrothermal method. The molar ratio of Ti/Ce was set as 1 : 0, 0.925 : 0.075, 0.9 : 0.1; 0.875 : 0.125, and 0.85 : 0.15 in the dried gels. Affected by the values of Ti/Ce, the particle sizes of hydrothermal products decreased obviously, and the surface of nanoparticles became rough and even had small protrusions. XRD, SEM, HRTEM, XPS, DRS, ESR, and PFM were used to characterize the nanoparticle textures. We speculated that the main body and surface of nanoparticles were BaTiO3 and CeO2 protrusions, respectively. The catalytic performance of BaTiO3/CeO2 nanoparticles was characterized by their abilities to degrade RhB in water under different external conditions (light irradiation, ultrasonic oscillation, or both). In all test groups, BaTiO3/CeO2 nanoparticles with a Ti/Ce molar ratio of 0.875 : 0.125 in the initial dried gel exhibited the strongest catalytic ability when light irradiation and ultrasonication were applied simultaneously owing to the appropriate amount of Ce3+ and oxygen vacancies.

Rational design of CdS/BiOCl S-scheme heterojunction for effective boosting piezocatalytic H2 evolution and pollutants degradation performances

Piezocatalysis as an emerging technology is broadly applied in hydrogen evolution and organic pollutants degradation aspects. However, the dissatisfactory piezocatalytic activity is a severe bottleneck for its practical applications. In this work, CdS/BiOCl S-scheme heterojunction piezocatalysts were constructed and explored the performances of piezocatalytic hydrogen (H₂) evolution and organic pollutants degradation (methylene orange, rhodamine B and tetracycline hydrochloride) under strain by ultrasonic vibration. Interestingly, CdS/BiOCl presents a volcano-type relationship between catalytic activity and CdS contents, namely firstly increases and then decreases with the increase of CdS content. Optimal 20 % CdS/BiOCl endows superior piezocatalytic H₂ generation rate of 1048.2 μmol g^-1h^-1 in methanol solution, which is 2.3 and 3.4 times higher than that of pure BiOCl and CdS, respectively. This value is also much higher than the recently reported Bi-based and most of other typical piezocatalysts. Meanwhile, 5 % CdS/BiOCl delivers the highest reaction kinetics rate constant and degradation rate toward various pollutants compared with other catalysts, which also exceeds that of the previously numerous results. Improved catalytic capacity of CdS/BiOCl is mainly ascribed to the construction of S-scheme heterojunction for enhancing the redox capacity as well as inducing more effective charge carriers separation and transfer. Moreover, S-scheme charge transfer mechanism is demonstrated via electron paramagnetic resonance and Quasi-In-situ X-ray photoelectron spectroscopy measurements. Eventually, a novel piezocatalytic mechanism of CdS/BiOCl S-scheme heterojunction has been proposed. This research develops a novel pathway for designing highly efficient piezocatalysts and provides a deeper understanding in construction of Bi-based S-scheme heterojunction catalysts for energy conservation and wastewater disposal applications.

BiOI/Bi2MoO6 p-n Junction to Enhance Visible Light Photocatalytic Activity toward Environmental Remediation

Photocatalytic degradation of organic pollutants via semiconductors with high visible light response and effective carrier separation is an economical and green route to greatly achieve environmental remediation. Herein, an efficient BiOI/Bi₂MoO₆ p-n heterojunction was in situ fabricated through hydrothermal method by substituting Mo₇O₂₄^6- species for I ions. The characteristic p-n heterojunction exhibited a strongly enhanced visible light responsive absorption from 500 to 700 nm owing to the narrow band gap of BiOI and a greatly effective separation of photoexcited carriers because of the built-in electric field on the interface between BiOI and Bi₂MoO₆. Moreover, the flower-like microstructure also promoted the adsorption of organic pollutants owing to the large surface area (about 10.36 m²/g), good for further photocatalytic degradation. As a result, BiOI/Bi₂MoO₆ p-n heterojunction showed an excellent photocatalytic activity of RhB of almost 95% in a short time of 90 min under wavelength longer than 420 nm, 2.3 and 2.7 times higher compared with single BiOI and Bi₂MoO₆, respectively. This work offers a promising approach to purify the environment through the utilization of solar energy by constructing efficient p-n junction photocatalysts.

Visible light and iodate/iodide mediated degradation of bisphenol A by self-assembly 3D hierarchical BiOIO3/Bi5O7I Z-scheme heterojunction: Intermediates identification, radical mechanism and DFT calculation

Broadening the light absorption and inhibiting carrier's recombination are vital to the improvement of photocatalytic performance. Herein, self-assembly 3D hierarchical microsphere BiOIO₃/Bi₅O₇I Z-scheme heterojunction with carrier transfer channel was firstly fabricated by in-situ solvothermal method. The degradation efficiency for bisphenol A (BPA) reached 98.9 % within 60 min visible light irradiation. The enhanced photocatalytic activity was benefited from the Z-scheme system assisted by iodate/iodide (IO₃^-/I^-) as carrier transfer channel that not only accelerated the interfacial charge separation, but also provided massive reactive centers for obtaining high redox capacity. The vulnerable sites and the degradation pathways of BPA were identified by density functional theory calculations and liquid chromatography-mass spectrometry analyses. The toxicity of BPA and its intermediates were predicted by ECOlogical Structure Activity Relationship (ECOSAR) and the results demonstrated that BPA was eventually mineralized to harmless products. The Z-scheme charge transfer mechanism was deeply elucidated based on the role of active species (·O₂^-, ·OH and h⁺), band structure and carrier separation efficiency. This study provides a promising strategy for the photoactivity enhancement of bismuth based heterojunction in environment purification.

Bismuth-based nanostructured photocatalysts for the remediation of antibiotics and organic dyes

A serious threat to human health and the environment worldwide, in addition to the global energy crisis, is the increasing water pollution caused by micropollutants such as antibiotics and persistent organic dyes. Nanostructured semiconductors in advanced oxidation processes using photocatalysis have recently attracted a lot of interest as a promising green and sustainable wastewater treatment method for a cleaner environment. Due to their narrow bandgaps, distinctive layered structures, plasmonic, piezoelectric and ferroelectric properties, and desirable physicochemical features, bismuth-based nanostructure photocatalysts have emerged as one of the most prominent study topics compared to the commonly used semiconductors (TiO₂ and ZnO). In this review, the most recent developments in the use of photocatalysts based on bismuth (e.g., BiFeO₃, Bi₂MoO₆, BiVO₄, Bi₂WO₆, Bi₂S₃) to remove dyes and antibiotics from wastewater are thoroughly covered. The creation of Z-schemes, Schottky junctions, and heterojunctions, as well as morphological modifications, doping, and other processes are highlighted regarding the fabrication of bismuth-based photocatalysts with improved photocatalytic capabilities. A discussion of general photocatalytic mechanisms is included, along with potential antibiotic and dye degradation pathways in wastewater. Finally, areas that require additional study and attention regarding the usage of photocatalysts based on bismuth for removing pharmaceuticals and textile dyes from wastewater, particularly for real-world applications, are addressed.

BiOCl Heterojunction photocatalyst: Construction, photocatalytic performance, and applications

BiOCl semiconductors have attracted extensive amounts of attention and have substantial potential in alleviating energy shortages, improving sterilization performance, and solving environmental issues. To improve the optical quantum efficiency of layered BiOCl, the lifetimes of photogenerated electron-hole pairs, and BiOCl reduction capacity. During the past decade, researchers have designed many effective methods to weaken the effects of these limitations, and heterojunction construction is regarded as one of the most promising strategies. In this paper, BiOCl heterojunction photocatalysts designed and synthesized by various research groups in recent years were reviewed, and their photocatalytic properties were tested. Among them, direct Z-scheme and S-scheme photocatalysts have high redox potentials and intense redox capabilities. Hence, they exhibit excellent photocatalytic activity. Furthermore, the applications of BiOCl heterojunctions for pollutant degradation, CO₂ reduction, water splitting, N₂ fixation, organic synthesis, and tumor ablation are also reviewed. Finally, we summarize research on the BiOCl heterojunctions and put forth new insights on overcoming their present limitations.

Effectively enhanced photocatalytic performance of layered perovskite Bi2NdO4Cl by coupling piezotronic effect

The coupling between piezoelectricity and photoexcitation is an attractive method for improving the photocatalytic efficiency of semiconductors. Herein, a novel layered perovskite photocatalyst Bi₂NdO₄Cl (BNOC) has been successfully prepared via solid-state reaction. PFM results confirm that BNOC has piezoelectricity, and its piezo-photocatalytic degradation performance was evaluated for the first time using tetracycline hydrochloride (TH) as a pollutant model. The results show that the piezo-photocatalytic degradation rate constant is about 1.5 times higher than the sum of the individual photo- and piezo-catalytic components. This synergistic enhancement can be attributed to the band tilting-induced piezoelectric polarization charges and formation of a piezoelectric field, which accelerates the photoinduced charge carrier separation and effectively enhanced the photocatalytic performance. This work may facilitate the development of novel piezoelectric photocatalytic materials that are highly sensitive to the mechanical energy of discrete fluids, and offer ideas for piezo-photocatalysis in environmental applications.

Unveiling the Mechanism of Frictional Catalysis in Water by Bi12TiO20: A Charge Transfer and Contaminant Decomposition Path Study

Tribocatalysis, as a new approach in environmental purification, has drawn increasing attention in the past few years. In this work, we successfully convert mechanical energy to chemical energy by Bi₁₂TiO₂₀, which was synthesized by a hydrothermal method. Under magnetic stirring, electrons transfer from the surface of Bi₁₂TiO₂₀ to the polytetrafluoroethylene-sealed magnetic bar due to their friction. Moreover, the holes that remain on Bi₁₂TiO₂₀ provide oxidation properties in the process for organic matter degradation. According to a series of tests, it is noticed that the shape of the stirring bar and the material of the reaction vessel have a remarkable influence on the removal efficiency of contaminants. Simultaneously, multiple tests reveal the high stability of Bi₁₂TiO₂₀. A great potential for Bi₁₂TiO₂₀ to control water pollutants under dark conditions during collection of ambient mechanical energy was clearly demonstrated in this study.