Bone graft materials

PLLA/GO Scaffolds Filled with Canine Placenta Hydrogel and Mesenchymal Stem Cells for Bone Repair in Goat Mandibles

Bone defects in animals can arise from various causes, including diseases, neoplasms, and most commonly, trauma. Comminuted fractures that exceed the critical size may heal poorly due to deficient or interrupted vascularization, resulting in an insufficient number of progenitor cells necessary for bone regeneration. In this context, 3D printing techniques using poly-L-lactic acid/graphene oxide (PLLA/GO) aim to address this issue by creating customized scaffolds combined with canine placenta hydrogel and mesenchymal stem cells for use in goat mandibles, compared to a control group using titanium plate fixation. Ten canine placentas were decellularized and characterized using histological techniques. A hydrogel derived from the canine placenta extracellular matrix (cpECM) was produced to improve cell attachment to the scaffolds. In vitro cytotoxicity and cell adhesion to the cpECM hydrogel were assessed by scanning electron microscopy (SEM). The resulting biomaterials, cpECM hydrogel and PLLA/GO scaffolds, maintained their functional structure and supported cell adhesion, maintenance, and proliferation in vitro. Thermography showed that PLLA/GO scaffolds with cpECM hydrogel performed effectively, similar to the control group. Computed tomography scans revealed bone calluses, suggesting an ongoing repair process. These findings demonstrate the innovative technological potential of these materials for use in surgical interventions. Future studies on PLLA/GO scaffolds will provide further insights into their effects on goat models.

Ridge preservation using a self-retaining block type bone substitute for extraction sockets with buccal dehiscence defects - A preclinical study

OBJECTIVE

To evaluate the effect of a self-retaining block-type bone substitute (srBB) on the dimensional stability of the horizontal ridge width at the coronal level in a buccal dehiscence model.

MATERIALS AND METHODS

Four box-shaped bone defects with a buccal dehiscence were surgically prepared in the partially edentulous mandible (n = 6). Experimental biomaterials were randomly assigned to each site: (1) Control group: no treatment, (2) particle-type bone substitute (PBS) group, (3) collagenated soft block bone substitute (csBB) group, and (4) self-retaining synthetic block bone (srBB) group. In all grafted groups, a collagen membrane covered the biomaterials. At 16 weeks, clinical, histological, and radiographic analyses were performed.

RESULTS

Three of the six blocks in the srBB group became exposed and fell out during the first week after surgery. Therefore, the remaining three specimens were renamed RsrBB group. The RsrBB group showed an increase horizontal ridge compared to the pristine bone width at 2-4 mm below the CEJ, while the other groups showed resorption (augmented width at 2 mm below: 4.2, 42.4, 36.2, and 110.1% in the control, PBS, csBB, and RsrBB groups, respectively). The mineralized bone area was largest in the RsrBB group (4.74, 3.44, 5.67, and 7.77 mm2 in the control, PBS, csBB, and RsrBB groups, respectively.).

CONCLUSIONS

The srBB group demonstrated the highest volume stability at the coronal level. These findings would potentially suggest that self-retaining block bone substitute might be a good candidate for alveolar ridge preservation.

Customized three-dimensional printed ceramic bone grafts for osseous defects: a prospective randomized study

Ridge resorption can result in insufficient bone volume for implant surgery, necessitating bone substitutes to restore the resorption area. Recent advances in computer-aided design and manufacturing enable the use of alloplastic bone graft materials with customizable compositions or shapes. This randomized study evaluated the clinical effectiveness of a customized three-dimensional (3D) printed alloplastic bone material. Sixty patients requiring guided bone regeneration for implant installation following tooth extraction due to alveolar bone resorption were recruited at two institutions. The participants were randomly allocated to either a group that received 3D-printed patient-customized bone graft material or a group that received conventional block bone graft material. Implant installation with bone harvesting was performed approximately 5 months after bone grafting. Histological and radiological assessments of the harvested bone area were performed. The experimental group had a significantly higher percent bone volume and a smaller tissue surface than the control group. Bone volume, bone surface, bone surface/volume ratio, bone surface density (bone surface/total volume), and bone mineral density did not differ significantly between groups. Patient-customized bone graft materials offer convenience and reduce patient discomfort. The findings suggest 3D-printed patient-customized bone graft materials could be used as an alternative for simpler bone grafting procedures.

Marine plankton exoskeletone-derived hydroxyapatite/polycaprolactone composite 3D scaffold for bone tissue engineering

3D porous scaffolds based on biodegradable polymers are one of the materials for bone tissue regeneration. In this study, a porous scaffold was prepared using a solvent casting/particulate leaching method that used polycaprolactone (PCL) and hydroxyapatite (OceanBone-HAp) extracted from a marine plankton exoskeleton to achieve excellent bone regeneration. In this study, the morphology and physicochemical properties of the PCL/OceanBone-HAp scaffolds were evaluated using scanning electron microscopy, X-ray diffraction, and porosity analysis. The results confirmed the porous structure of the scaffold and removal of the solvent and porogen particles. In vitro test results revealed superior cell adhesion, proliferation, and viability of PCL/OceanBone-HAp scaffolds compared to PCL scaffolds alone. The enhanced alkaline phosphatase activity and expression of bone morphogenetic protein 2, collagen type I α 1, osteocalcin, and bone sialoprotein in the PCL/OceanBone-HAp scaffolds were confirmed through ALP and real-time polymerase chain reaction assays. Moreover, in vivo experiments using a rabbit calvarial defect model showed that the PCL/OceanBone-HAp scaffold exhibited enhanced bone regeneration compared to the PCL scaffold. Therefore, the PCL/OceanBone-HAp scaffold is a promising scaffold for bone repair.

A new multiphase calcium phosphate graft material improves bone healing-An in vitro and in vivo analysis

This study aims to evaluate the potential of a novel biomaterial synthesized from amorphous calcium phosphate (ACP), octacalcium phosphate (OCP), and hydroxyapatite (HA) to repair critical-sized defects (CSD) in rabbit calvaria. In vitro analyses of cell viability, cell proliferation, formation of mineral nodules, and cell differentiation using qPCR were performed for comparing experimental calcium phosphate (ECP), deproteinized bovine bone (DBB), and beta-tricalcium phosphate (β-TCP). Bilateral CSDs were created in 45 rabbit calvaria. Six groups were evaluated: ECP, ECP + fibrin sealant (ECP + S), coagulum, autogenous bone, DBB, and β-TCP. Euthanasia was performed at 2, 4, and 8 weeks, followed by micro-computed tomography and histological and immunohistochemical analyses. Results from in vitro analyses revealed similar biocompatibility for all tested materials and a tendency for higher gene expression of some bone markers in the ECP group than in β-TCP and DBB groups at 7 days. In contrast to that in DBB and β-TCP groups, ECP displayed growing bone volume over total volume percentage (BV/TV%) with time in vivo. Histological analysis revealed a greater number of giant cells and reduced size of grafted particles in ECP during all periods of analysis. RUNX-2 expression was statistically lower in ECP than DBB at 2 and 4 weeks. Despite no statistical significance, ECP presented the highest absolute values for ALP-expression at 2, 4, and 8 weeks compared with other groups. Together, our findings indicate that a combination of the ACP, OCP, and HA phases into ECP is beneficial and promising for bone regeneration.

Comparison of Two Bovine Commercial Xenografts in the Regeneration of Critical Cranial Defects

Autologous bone is the gold standard in regeneration processes. However, there is an endless search for alternative materials in bone regeneration. Xenografts can act as bone substitutes given the difficulty of obtaining bone tissue from patients and before the limitations in the availability of homologous tissue donors. Bone neoformation was studied in critical-size defects created in the parietal bone of 40 adult male Wistar rats, implanted with xenografts composed of particulate bovine hydroxyapatite (HA) and with blocks of bovine hydroxyapatite (HA) and Collagen, which introduces crystallinity to the materials. The Fourier-transform infrared spectroscopy (FTIR) analysis demonstrated the carbonate and phosphate groups of the hydroxyapatite and the amide groups of the collagen structure, while the thermal transitions for HA and HA/collagen composites established mainly dehydration endothermal processes, which increased (from 79 °C to 83 °C) for F2 due to the collagen presence. The xenograft's X-ray powder diffraction (XRD) analysis also revealed the bovine HA crystalline structure, with a prominent peak centered at 32°. We observed macroporosity and mesoporosity in the xenografts from the morphology studies with heterogeneous distribution. The two xenografts induced neoformation in defects of critical size. Histological, histochemical, and scanning electron microscopy (SEM) analyses were performed 30, 60, and 90 days after implantation. The empty defects showed signs of neoformation lower than 30% in the three periods, while the defects implanted with the material showed partial regeneration. InterOss Collagen material temporarily induced osteon formation during the healing process. The results presented here are promising for bone regeneration, demonstrating a beneficial impact in the biomedical field.

Biocompatibility Assessment of Two Commercial Bone Xenografts by In Vitro and In Vivo Methods

Bone substitutes based on xenografts have been used for a long time in bone regeneration thanks to their inductive capacity for bone tissue regeneration. Some bone-based scaffolds have been modified by adding collagen and other proteins to improve their regenerative capacity and prevent migration and aggregation, especially particles. However, rejection of this graft has been reported due to protein residues caused by poor material preparation. We compared the in vitro and in vivo biological response of two commercial xenografts (InterOss^®, F1 and InterOss^® Collagen, F2) and a commercial porcine collagen membrane (InterCollagen^® Guide, F3) as a rapid degradation control. Fourier Transform Infrared Spectroscopy (FT-IR) analysis evidenced the presence of hydroxyl, orthophosphate, and carbonate groups of the xenografts and amide groups of collagen. Thermogravimetric analysis (TGA) of the xenografts demonstrated their thermal stability and the presence of a few amounts of organic material. The study by differential scanning calorimetry showed the presence of endothermic peaks typical of the dehydration of the xenografts (F1 and F2) and for the collagen membrane (F3), the beginning of structural three-dimensional protein changes. Subsequently, in vitro biocompatibility tests were carried out for the materials with Artemia salina and MTT cell viability with HeLa cells, demonstrating the high biocompatibility of the materials. Finally, in vivo biocompatibility was studied by implanting xenografts in biomodels (Wistar rats) at different periods (30, 60, and 90 days). The F1 xenograft (InterOss) remained remarkably stable throughout the experiment (90 days). F2 (InterOss Collagen) presented a separation of its apatite and collagen components at 60 days and advanced resorption at 90 days of implantation. Finally, the collagen membrane (F3) presented faster resorption since, at 90 days, only some tiny fragments of the material were evident. All the in vivo and in vitro test results demonstrated the biocompatibility of the xenografts, demonstrating the potential of these materials for tissue engineering.

Clinical Reference Strategy for the Selection of Treatment Materials for Maxillofacial Bone Transplantation: A Systematic Review and Network Meta-Analysis

Bone graft materials have mixed effects of bone repair in the field of oral maxillofacial surgery. The qualitative analyses performed by previous studies imply that autogenous odontogenic materials and autogenous bone have similar effects on bone repair in clinical jaw bone transplantation. This retrospective systematic assessment and network meta-analysis aimed to analyze the best effect of clinical application of autogenous odontogenic materials and autogenous, allogeneic, and xenogeneic bone grafts in bone defect repair. A systematic review was performed by searching the PubMed, Cochrane Library, and other journal databases using selected keywords and Medical Subject Headings search terms. 10 Papers (n = 466) that met the inclusion criteria were selected. The assessment of heterogeneity did not reveal any overall statistical difference or heterogeneity (P = 0.051 > 0.05), whereas the comparison between autogenous and allogeneic bone grafts revealed local heterogeneity (P = 0.071 < 0.1). Risk of bias revealed nine unclear studies and one high-risk study. The overall consistency was good (P = 0.065 > 0.05), and the local inconsistency test did not reveal any inconsistency. The publication bias was good. The confidence regarding the ranking of bone graft materials after GRADE classification was moderate. The effects on bone repair in the descending order were as follows: autogenous odontogenic materials, xenogeneic bone, autogenous bone, and allogeneic bone. This result indicates that the autogenous odontogenic materials displayed stronger effects on bone repair compared to other bone graft materials. Autogenous odontogenic materials have broad development prospects in oral maxillofacial surgery.

Bone Grafts in Dental Implant Management: A Narrative Review

Successful implant dentistry can be directly related to the quality and quantity of bone at the recipient site of the implant. Over the years, bone grafts have been used for the treatment of various osseous defects. Due to the widespread acceptance of dental implants, interest in bone reconstruction for the oral cavity has increased dramatically over the past decade. Many patients who request implant rehabilitation require ancillary procedures to increase the quantity and quality of the recipient's bone. The internal architecture of the bone is generally described in terms of quality of the bone, which in turn reflects the strength (degree of compactness) of the bone. This is considered a crucial factor about the available bone at the edentulous site while planing about the design of the planned implant, surgical approach, healing time, and the initial progressive bone loading during the prosthetic reconstruction. Atrophy of the alveolar processes is expressed as a reduction of height and width. Databases were electronically searched up to April 2019 to identify human bone graft studies to provide contemporary and comprehensive information about the various bone grafts used in dental implant management.

Computed tomography and histological evaluation of xenogenic and biomimetic bone grafts in three-wall alveolar defects in minipigs

OBJECTIVES

This study aimed to compare the performance of a xenograft (XG) and a biomimetic synthetic graft (SG) in three-wall alveolar defects in minipigs by means of 3D computerised tomography and histology.

MATERIALS AND METHODS

Eight minipigs were used. A total of eight defects were created in the jaw of each animal, three of which were grafted with XGs, three with SGs, and two were left empty as a negative control. The allocation of the different grafts was randomised. Four animals were euthanised at 6 weeks and four at 12 weeks. The grafted volume was then measured by spiral computed tomography to assess volume preservation. Additionally, a histological analysis was performed in undecalcified samples by backscattered scanning electron microscopy and optical microscopy after Masson's trichrome staining.

RESULTS

A linear mixed-effects model was applied considering four fixed factors (bone graft type, regeneration time, anatomic position, and maxilla/mandible) and one random factor (animal). The SG exhibited significantly larger grafted volume (19%) than the XG. The anterior sites preserved better the grafted volume than the posterior ones. Finally, regeneration time had a positive effect on the grafted volume. Histological observations revealed excellent osseointegration and osteoconductive properties for both biomaterials. Some concavities found in the spheroidal morphologies of SGs were associated with osteoclastic resorption.

CONCLUSIONS

Both biomaterials met the requirements for bone grafting, i.e. biocompatibility, osseointegration, and osteoconduction. Granule morphology was identified as an important factor to ensure a good volume preservation.

CLINICAL RELEVANCE

Whereas both biomaterials showed excellent osteoconduction, SGs resulted in better volume preservation.

Analyses of Bone Regeneration Capacity of Freeze-Dried Bovine Bone and Combined Deproteinized-Demineralized Bovine Bone Particles in Mandibular Defects: The Potential Application of Biological Forms of Bovine-Bone Filler

Objective  This study aimed to evaluate bone regeneration capacity of FDBX granules compared to composite DBBM/DFDBX granules for filling of bone defect in rabbit mandible.

Material and Methods  Critical size defects were created in 45 rabbits' mandible. The defect in the control group is left untreated, while in other groups the defects were filled with FDBX granules and composite DBBM/DFDBX granules, respectively. Specimens were collected at 2, 4, and 8 weeks for histology and immunohistochemical analyses. Significant difference is set at p -value < 0.05.

Results  The osteoblast-osteoclast quantification, osteoblast expression of Runx2, alkaline phosphatase, collagen-I, and osteocalcin, and osteoclast expression of receptor activator of NF-kB ligand (RANKL) and osteoprotegerin (OPG) in FDBX groups were statistically comparable ( p  > 0.05) with the composite group, while OPG/RANKL ratio, bone healing scores, and trabecular area were significantly higher ( p  < 0.05) in the composite compared to FDBX group.

Conclusion  Composite DBBM/DFDBX granules, within the limitation of this study, has better bone forming capacity than FDBX granules for filling of bone defects in the mandible.

Radiographic and Histomorphometric Evaluation of Biomaterials Used for Lateral Sinus Augmentation: A Systematic Review on the Effect of Residual Bone Height and Vertical Graft Size on New Bone Formation and Graft Shrinkage

The aim of the present systematic review was to investigate the effect of residual bone height (RBH) and vertical bone gain on new bone formation (NBF) and graft shrinkage after lateral sinus lifts using different biomaterials.

METHODS

An electronic search was conducted on three databases to identify randomized controlled trials (RCTs) published until January 2021 with at least one follow-up at 6 months and at least five patients treated, comparing biomaterials used for maxillary sinus augmentation with a lateral approach. Graft volumetric changes, RBH, vertical bone gain, implant failure, and post-operative complications were evaluated. The risk of bias was assessed using the Cochrane tool.

RESULTS

We used 4010 identified studies, of which 21 were RCTs. Overall, 412 patients and 533 sinuses were evaluated. Only three publications had an overall low risk of bias. After 6 months, xenograft (XG) showed the least volume reduction (7.30 ± 15.49%), while autogenous graft (AU) was the most reabsorbed (41.71 ± 12.63%). NBF appeared to not be directly correlated with RBH; on the contrary, the overall linear regression analysis showed that NBF significantly decreased by 1.6% for each mm of postoperative vertical graft gain. This finding suggests that the greater the augmentation, the lower the NBF. A similar tendency, with a regression coefficient even higher than the overall one, was also observed with alloplast (AP) and XG.

CONCLUSIONS

The present results suggested that NBF was essentially independent of preoperative bone height. On the contrary, the smaller the volume was of the graft placed, the higher the amount of new bone formed, and the smaller the graft shrinkage was. Minimizing the augmentation volume might be beneficial to graft healing and stability especially when using AP and XG.

Staged Sinus Floor Elevation Using Novel Low-Crystalline Carbonate Apatite Granules: Prospective Results after 3-Year Functional Loading

The aim of this study was to evaluate clinical outcomes of staged sinus floor elevation (SFE) using novel low-crystalline carbonate apatite (CO₃Ap) granules. Patients who needed SFE for implant placement were recruited into this clinical trial. A staged procedure (lateral window technique using CO₃Ap granules, followed by implant placement after 7 ± 2 months) was employed in 13 patients. Bone-height increase and insertion torque values (ITVs) were assessed along with histological evaluation. The survival and success rates of 3-year functioning implants were also evaluated. Mean of bone-height increase after SFE using CO₃Ap granules was 7.2 ± 2.5 mm and this increase allowed implant placement in all cases (17 implants). Mean of ITV was 25.1 ± 13.2 Ncm and primary stability was achieved successfully in all cases. Histological analyses revealed mature new bone formation (36.8 ± 17.3%) and residual CO₃Ap granules (16.2 ± 10.1%) in the compartment after SFE. The survival and success rates after 3-year functional loading were 100% and no complications were found. These results clearly indicate the clinical usefulness of CO₃Ap granules for SFE.

Autogenous Bone and Bioactive Glass around Implants Placed Simultaneously with Ridge Splitting for the Treatment of Horizontal Bony Defects: A Randomised Clinical Trial

Objective

To compare using autogenous bone with or without bioactive glass in ridge splitting of horizontal bone defects combined with simultaneous implant placement.

Materials and Methods

In control group, bone expansion was performed and autogenous bone was used to augment the intercortical bone defect. In study group, autogenous bone was mixed with bioactive glass (1 : 1 in volume). In both groups, the implants were inserted simultaneously with ridge splitting. Six months following implant insertion, bone width and height were evaluated. Statistical analysis utilizing paired Student's t-test was used for comparing results within the same group, whereas independent samples t-test was used for intergroup variables comparison.

Results

The mean bone width and labial and mesiodistal crestal bone height values were increased significantly in both groups from baseline to 6 months postoperatively. Comparing the two groups showed nonstatistical significant difference regarding the labial crestal bone loss, while the ridge width gain values were significantly higher in the study group than in the control group. The mesiodistal bone loss was significantly higher in control group than in study group.

Conclusion

Autogenous bone was mixed with bioactive glass (1 : 1 in volume) to fill intercortical defect created after ridge splitting to decrease peri-implant bone resorption associated with autogenous bone alone. This trial is registered with clinical trial registration: NCT04814160.

Biomedical applications of natural rubber latex from the rubber tree Hevea brasiliensis

The past decades have witnessed tremendous progress in biomaterials in terms of functionalities and applications. To realize various functions such as tissue engineering, tissue repair, and controlled release of therapeutics, a biocompatible and biologically active material is often needed. However, it is a difficult task to find either synthetic or natural materials suitable for in vivo applications. Nature has provided us with the natural rubber latex from the rubber tree Hevea brasiliensis, a natural polymer that is biocompatible and has been proved as inducing tissue repair by enhancing the vasculogenesis process, guiding and recruiting cells responsible for osteogenesis, and acting as a solid matrix for controlled drug release. It would be extremely useful if medical devices can be fabricated with materials that have these biological properties. Recently, various types of natural rubber latex-based biomedical devices have been developed to enhance tissue repair by taking advantage of its biological properties. Most of them were used to enhance tissue repair in chronic wounds and critical bone defects. Others were used to design drug release systems to locally release therapeutics in a sustained and controlled manner. Here, we summarize recent progress made in these areas. Specifically, we compare various applications and their performance metrics. We also discuss critical problems with the use of natural rubber latex in biomedical applications and highlight future opportunities for biomedical devices produced either with pre-treated natural rubber latex or with proteins purified from the natural rubber latex.

Evaluation of the Histomorphometric and Micromorphometric Performance of a Serum Albumin-Coated Bone Allograft Combined with A-PRF for Early and Conventional Healing Protocols after Maxillary Sinus Augmentation: A Randomized Clinical Trial

The aim of this study was to compare the microarchitecture of augmented bone following maxillary sinus augmentation (MSA) after healing periods of 3 (test) and 6 (control) months using the combination of advanced platelet-rich fibrin (A-PRF) and a serum albumin-coated bone allograft (SACBA). Twenty-six patients with 30 surgical sites who required two-stage MSA were enrolled and grafted with the combination of A-PRF and SACBAs. The surgical sites were randomly allocated to the test or control group. During implant site preparation, 17 bone core biopsy samples were collected from each study group for histological, histomorphometric and micromorphometric analysis. Resonance frequency analysis was performed at the time of implant placement and 6, 8, 10, and 12 weeks postoperatively. The percentage of newly formed bone was 44.89 ± 9.49% in the test group and 39.75 ± 8.15% in the control group (p = 0.100). The results of the µCT analysis showed no significant differences in morphometric parameters between the study groups. The implant stability quotient was not significantly different between the two groups at 10 and 12 weeks postoperatively. Based on these findings, the total treatment time may be reduced by 3 months with the use of A-PRF and SACBAs for two-stage MSA.

Bone regeneration of a polymeric sponge technique-Alloplastic bone substitute materials compared with a commercial synthetic bone material (MBCP+TM technology): A histomorphometric study in porcine skull

Background

Polymeric sponge technique is recommended for developing the desired porosity of Biphasic calcium phosphate (BCP) which may favor bone regeneration.

Purpose

To investigate the healing of BCP with ratio of HA30/β‐TCP70 (HA30) and HA70/β‐TCP30 (HA70) polymeric sponge preparation, compare to commercial BCP (MBCP+TM).

Materials and Methods

Materials were tested X‐ray diffraction (XRD) pattern and scanning electron microscope (SEM) analysis. In eight male pigs, six calvarial defects were created in each subject. The defects were the filled with 1 cc of autogenous bone, MBCP+TM (MBCP), HA30, HA70, and left empty (negative group). The new bone formations, residual material particles and bone‐to‐graft contacts were analyzed at 4, 8, 12 and 16 weeks.

Results

Fabricated BCP showed well‐distributed porosity. At 16 weeks, new bone formations were 45.26% (autogenous), 33.52% (MBCP), 24.34% (HA30), 19.43% (HA70) and 3.37% (negative). Residual material particles were 1.88% (autogenous), 17.58% (MBCP), 26.74% (HA30) and 37.03% (HA70). These values were not significant differences (Bonferroni correction <0.005). Bone‐to‐graft contacts were 73.68% (MBCP), which was significantly higher than 41.68% (HA30) and 14.32% (HA70; Bonferroni correction <0.017).

Conclusions

Polymeric sponge technique offers well‐distributed porosity. The new bone formation and residual material particles were comparable to MBCP+TM, but the bone‐to‐graft contact was lower than MBCP+TM.

Intramembranous Ossification Imitation Scaffold with the Function of Macrophage Polarization for Promoting Critical Bone Defect Repair

The regeneration of craniofacial bone defects remains a crucial clinical challenge. To date, numerous biomaterials are applied in this field. However, current strategies have ignored the importance of intramembranous ossification and the vital role of macrophages in regulating osteogenesis. Here, an osteoblast (OB)-targeting peptide (SDSSD)-modified chitosan scaffold (CS-SDSSD) is developed for imitating the physiological process of bone development from the fibrous membrane. The addition of free peptide (fSDSSD) can recruit host OBs, and the peptide grafted on the scaffold (CS-SDSSD) can well organize the migrated OBs by binding with their surface periostin. Besides, macrophage polarization is found in the bone defects. CS-SDSSD + fSDSSD displays advantages in prioritizing M2 macrophage polarization and promoting the intramembranous ossification bone repair process. In summary, our strategy provides an economical and effective path for craniofacial bone repair and holds great potential for biomedical applications.

High Potential of Bacterial Adhesion on Block Bone Graft Materials

Bone graft infections represent a challenge in daily clinics, resulting in increased patient discomfort and graft removal. The aim of this study was to investigate the initial adhesion of five representative pathogens on three different block bone graft materials (xenogeneic, alloplastic and allogeneic) and to assess if chlorhexidine (CHX) can effectively control the initial bacterial adhesion. Three different block bone grafting materials (Tutobone®, Endobon® and human spongiosa) were incubated with Escherichia coli, Staphylococcus aureus, Streptococcus mutans, Enterococcus faecalis and Pseudomonas aeruginosa in the presence or absence of 0.2% CHX solution. Bacterial adhesion was assessed by the direct counting of the colony-forming units (CFUs) and visualized by scanning electron microscopy (SEM). Overall, the selected bacterial species adhered successfully to all tested bone replacement scaffolds, which showed similar bacterial counts. The lg CFU values ranged from 5.29 ± 0.14 to 5.48 ± 0.72 for E. coli, from 4.37 ± 0.62 to 5.02 ± 0.48 for S. aureus, from 4.92 ± 0.34 to 4.95 ± 0.21 for S. mutans, from 4.97 ± 0.40 to 5.22 ± 0.13 for E. faecalis and from 4.23 ± 0.54 to 4.58 ± 0.26 for P. aeruginosa. CHX did not interfere with initial microbial adhesion, and yet it killed all adhered bacterial cells. Thus, CHX can be used to prevent subsequent biofilm infections.

Effects of low-intensity pulsed ultrasound exposure on rats tibia periosteum

The periosteum is a rich source of osteoprogenitor cells and periosteal grafts can be used as an alternative method to replace bone grafts. The low-intensity pulsed ultrasound (LIPUS) has often been used as a noninvasive method to stimulate osteogenesis and reduce the fracture healing time. The aim of this study was to evaluate the effects of the ultrasound exposure on the rat tibia periosteum. Group I (7 animals) received LIPUS therapy on the left tibia for 7 days and group II (7 animals) on the left tibia for 14 days. After euthanasia, the tibias were processed. Number of periosteal cells and vessels and thickness of the periosteum were analyzed. The number of periosteal cells was higher in stimulated periosteum compared to controls at 7 and 14 days, but the number of vessels and the thickness only were higher in the group stimulated at 14 days. Furthermore, the ultrasound treatment for 14 days was more effective than 7 days. The ultrasound stimulation of the periosteum prior to grafting procedure can be advantageous, since it increases periosteal activity, and LIPUS may be an alternative method for stimulating the periosteum when the use of periosteal grafts in bone repair is needed.

Socket Preservation Using a (Dense) PTFE Barrier with or without Xenograft Material: A Randomized Clinical Trial

When alveolar preservation procedures are not performed after tooth extraction, aesthetic and functional impairment could occur. Guided bone regeneration using polytetrafluoroethylene (PTFE) membranes has proven to be a simple alternative treatment that results in good maintenance of the alveolar bone for mediate/late implant placement. Therefore, this study compared the effect of alveolar preservation with the use of dense PTFE membranes, with and without xenograft material by Computerized tomography-based body composition (CTBC) analysis, after four months of the socket preservation procedure. A total of 29 teeth indicated for extraction. In the test group, the sockets were filled with bone graft biomaterial and subsequently coated with a dense PTFE membrane. In the control group, the sockets were filled with the blood clots and subsequently coated with a dense PTFE membrane. The results we found on the changes of the bone width and height after the procedures were: buccal plate: control group 0.46 mm, test group 0.91 mm; alveolar height: control group -0.41 mm, test group 0.35 mm; cervical third: control group -0.89 mm, test group -0.11 mm; middle third: control group -0.64, test group -0.50; and apical third: control group 0.09 mm, test group -0.14 mm. The use of a xenograft in conjunction with d-PTFE membranes proved to be superior to the use of the same membrane and blood clot only in regions of the crest, middle third, and alveolar height.

Maxillary sinus floor elevation using Beta-Tricalcium-Phosphate (beta-TCP) or natural bone: same inflammatory response

Sinus elevation is a common procedure to increase bone volume in the atrophic maxilla to allow placement of dental implants. Autogenous bone is the gold standard but is limited in quantity and causes morbidity at the donor site. β-TCP is a synthetic biomaterial commonly used in that purpose. It appears to induce a poor inflammatory response. This study aimed to evaluate the degree of edema of the sinus mucosa after sinus lift surgery according to the type of biomaterial. Forty sinuses (20 patients) were included retrospectively and divided into 2 groups according to the biomaterial that was used: synthetic biomaterial (BTCP group), natural bone (BONE group). A control group (CTRL group) was constituted by the non-grafted maxillary sinuses. Twelve measurements per sinus were realized on pre- and post-operative computed tomography and averaged to provide the sinus membrane thickness value (SM.Th). SM.Th was thicker post-operatively in the BTCP and BONE groups in comparison with the CTRL group and in comparison with pre-operative measurements. No difference was found post operatively between the BTCP and BONE groups. We found that a synthetic biomaterial (β-TCP) induced the same degree of edema, and thus of inflammation, as natural bone. It constitutes therefore an interesting alternative to autogenous bone for maxillary sinus lifts.

[Masquelet technique combined with artificial dermis for the treatment of bone and soft tissue defects in rabbits]

OBJECTIVE

To investigate the effect of Masquelet technique combined with artificial dermis on repairing bone and soft tissue defects in rabbits, and to observe the microstructure and vascularization of induced membrane, so as to guide the clinical treatment of Gustilo-Anderson type Ⅲ open fracture with large bone defect and soft tissue defect.

METHODS

Eighty male rabbits, weighing 2.03-2.27 kg (mean, 2.11 kg), were selected. The bilateral thighs of 64 rabbits were randomly divided into experimental group and control group, the remaining 16 rabbits were sham operation group. Bone and soft tissue defect models of femur were made in all rabbits. In the experimental group, the first stage of Masquelet technique was used [polymethyl methacrylate bone cement was filled in bone defect area] combined with artificial dermis treatment; in the control group, the first stage of Masquelet technique was used only; in the sham operation group, the wound was sutured directly without any treatment. Four rabbits in sham operation group and 16 rabbits in the experimental group and control group were sacrificed at 2, 4, 6, and 8 weeks after operation, respectively. The induced membranes and conjunctive membranes were observed on both sides of the femur. The membrane structure was observed by HE staining, and the microvessel density (MVD) was counted by CD34 immunohistochemical staining.

RESULTS

Gross observation showed that the spongy layer of collagen in the artificial dermis of the experimental group disappeared completely at 4 weeks after operation, and the induced membrane structure of the experimental group and the control group was complete; the membrane structure of the control group was translucent, and the membrane structure of the experimental group was thicker, light red opaque, accompanied by small vessel proliferation. The membrane structure of the experimental group and the control group increased gradually from 6 to 8 weeks after operation. In the sham operation group, only scar tissue proliferation was observed over time. HE staining showed that a large number of muscle fibers and a small amount of collagen fibers proliferation with inflammatory cell infiltration could be seen in the experimental group and the control group at 2 weeks after operation; most of the sham operation group were muscle fibers with a small amount of interfibrous vessels. At 4 weeks after operation, collagen fibers increased and some blood vessels formed in the experimental group. The nuclei of collagen fibers in the control group were round-like, while those in the experimental group were flat-round. At 6 and 8 weeks after operation, the collagen fibers in the experimental group and the control group increased. The nuclei of the collagen fibers in the control group were still round-like. The nuclei of the collagen fibers in the experimental group were fusiformis and deeply stained compared with those in the control group. The proliferation of blood vessels was observed in both groups, and the number of proliferation vessels in the experimental group was increased compared with that in the control group. In the sham operation group, a large number of fibroblasts still appeared, but no significant proliferation of blood vessels with time was observed. CD34 immunohistochemical staining showed that MVD in each group increased gradually with the prolongation of time after operation. MVD in the sham operation group was significantly higher than that in the experimental group and the control group at 2 weeks after operation, and significantly smaller than that in the experimental group and the control group at 4, 6, and 8 weeks after operation ( P<0.05). MVD in the experimental group was significantly higher than that in the control group at 4 and 6 weeks after operation ( P<0.05), but there was no significant difference in MVD between the two groups at 2 and 8 weeks ( P>0.05).

CONCLUSION

Masquelet technique combined with artificial dermis in the treatment of femoral bone defect and soft tissue defect in rabbits can significantly promote the vascularization of membrane structure at 4-6 weeks after operation. The combination of these two methods has guiding significance for the treatment of Gustilo-Anderson type Ⅲ open fracture with bone and soft tissue defects.

Effects of methods of hydration of a biphasic ceramic graft on bone regeneration of extraction socket defects

BACKGROUND

Alveolar volumetric changes are inherent to the healing process after tooth extraction and filling of the extraction site with biomaterials can reduce these volumetric changes and provide a more favorable environment for the future prosthetic restoration with implants. Among the biomaterials available, biphasic ceramic compounds have shown promissing clinical results, however, histologic evaluation of bone tissue response to different hydration and incorporation methods are limited. The objective of this study was to comparatively evaluate in vivo the osteoconductive potential of the biphasic ceramic bone substitute (SBC) composed of beta-tricalcium phosphate and hydroxyapatite after different hydration methodologies in rat extraction sockets.

METHODS

Wistar rats (n = 20) were randomly distributed in two subgroups (G1, G2) according to the hydration methods used. After extraction of the right upper central incisor the alveoli were filled with SBC hydrated by two different methods. Group 1: biomaterial hydrated in blood; Group 2: biomaterial hydrated in physiologic saline. The animals were euthanized after 1 and 6 weeks for removal of the bone blocks containing the biomaterial and were submitted to histologic processing. Five-μm-thick demineralized sections of the samples were stained with hematoxylin and eosin (HE) and subjected to histomorphometric analysis.

RESULTS

Bone formation was limited 7 days after the extraction procedure and increased in both groups between 7 and 42 days from surgery, demonstrating a time dependent increase of bone volume throughtout the experimental period (p < 0.05).

CONCLUSIONS

The hydration of SBC with saline significantly increased new bone formation and reduced connective tissue volume after 42 days demonstrating that hydration method may significantly influence bone healing in such defects, and, thus should be carefully performed.

A pilot study: Alternative biomaterials in critical sized bone defect treatment

BACKGROUND

Critical-sized bone defects are a significant challenge with limited effective reconstructive options. The Masquelet Technique (MT) offers a solution to help restore form and function. Although this technique has produced promising results; a clear mechanism has not been determined. Theories include that the induced membrane has osteogenic potential or the membrane acts as a physical barrier to prevent fibrous tissue ingrowth. We hypothesize the induced membrane acts primarily as a physical barrier and that a synthetic non-biological membrane will allow a comparable amount of bone volume in the defect site.

METHODS

Ten New Zealand rabbit forelimbs (n=10) were divided into three study groups. A critical sized defect of 3.5cm in the ulna was created. In the control group, a traditional MT was performed (n=4). The experimental arm varied by replacement of the PMMA with a non-porous (n=3) or porous (150um) (n=3) polytetrafluoroethylene (PTFE) membrane filled with allograft. Micro-CT analysis was done to compare bone volume to tissue volume ratios (BV/TV). Defect sections were examined histologically with alkaline phosphatase (ALP), tartrate-resistant acid phosphatase (TRAP) and von kossa (VK) staining.

RESULTS

MicroCT analysis comparing BV/TV between the control and experimental arms showed no difference. BV/TV of the MT was 7.77%±2.34 compared to porous 9.12%±3.66 and nonporous 9.76%±1.57 PTFE membranes (p1=0.761, p2=0.572, respectively). Histological sections from both samples stained for ALP and TRAP displayed osteoblastic and osteoclastic activity. There was a higher amount of ALP and TRAP positively stained cells near the native bone ends in comparison to the center of the defect, in both sample types.

CONCLUSION AND SIGNIFICANCE

Replacing the induced membrane from the MT with a synthetic PTFE membrane illustrated that the membrane acts primarily as a functional barrier. Compared to the induced membrane, the PTFE membrane was able to display similar osteointegrative properties. These results allow for future optimization of the technique with the potential to further streamline towards a single stage procedure.

Maxillary sinus lift using osteoinductive simvastatin combined with β-TCP versus β-TCP - a comparative pilot study to evaluate simvastatin enhanced and accelerated bone formation

PURPOSE

The aim of this study was to evaluate available bone quality and quantity after performing sinus augmentation using simvastatin/β-TCP combination versus β-TCP alone.

MATERIALS AND METHODS

This study included eight sinus lift procedures conducted on six patients. The sinuses were divided into two equal groups. The patients were recalled one, two weeks two, five, nine months post-operatively for post-operative evaluation. Radiographic evaluation involved cone beam computed tomography (CBCT) radiographs taken for every patient one week and nine months post-operatively to evaluate the changes in bone height, while histomorphometric evaluation involved transcortical bone biopsies taken after nine months during the second-stage surgery for implant placement.

RESULTS

The histomorphometric results showed that the amount of newly formed bone was higher in the simvastatin group when compared to the β-TCP group nine months after the surgery; the difference between the two groups was statistically significant. On the other hand, the radiographic evaluation showed that the rate of resorption of the simvastatin group was found to be higher than the control group; however, the difference between both groups was statistically insignificant.

CONCLUSION

These results showed that Simvastatin is safe to be used in sinus lift with promising osteoinductive capacity, yet further studies using larger sample size is needed.

A comprehensive clinical review of maxillary sinus floor elevation: anatomy, techniques, biomaterials and complications

Several systematic reviews have shown that maxillary sinus augmentation is a predictable and effective procedure for augmentation of an atrophic posterior maxilla. However, we know of no reviews that have covered all the clinical aspects. We searched the PubMed, EMBASE, Cinhal, and Cochrane databases up to January 2015 to select relevant studies that cover the different objectives of this review, including the anatomy of the maxillary sinus, surgical techniques, biomaterials used in the sinus augmentation, and potential complications.

Biomaterial-Stabilized Soft Tissue Healing for Healing of Critical-Sized Bone Defects: the Masquelet Technique

Critical-sized bone defects present a significant burden to the medical community due to their challenging treatment. However, a successful limb-salvaging technique, the Masquelet Technique (MT), has significantly improved the prognosis of many segmental bone defects in helping to restore form and function. Although the Masquelet Technique has proven to be clinically effective, the physiology of the healing it induces is not well understood. Multiple modifiable factors have been implicated by various surgical and research teams, but no single factor has been proven to be critical to the success of the Masquelet Technique. In this review the most recent clinical and experimental evidence that supports and helps to decipher the traditional Masquelet, as well as the modifiable factors and their effect on the success of the technique are discussed. In addition, future developments for the integration of the traditional Masquelet Technique with the use of alternative biomaterials to increase the effectiveness and expand the clinical applicability of the Masquelet Technique are reviewed.

Advancing biomaterials of human origin for tissue engineering

Biomaterials have played an increasingly prominent role in the success of biomedical devices and in the development of tissue engineering, which seeks to unlock the regenerative potential innate to human tissues/organs in a state of deterioration and to restore or reestablish normal bodily function. Advances in our understanding of regenerative biomaterials and their roles in new tissue formation can potentially open a new frontier in the fast-growing field of regenerative medicine. Taking inspiration from the role and multi-component construction of native extracellular matrices (ECMs) for cell accommodation, the synthetic biomaterials produced today routinely incorporate biologically active components to define an artificial in vivo milieu with complex and dynamic interactions that foster and regulate stem cells, similar to the events occurring in a natural cellular microenvironment. The range and degree of biomaterial sophistication have also dramatically increased as more knowledge has accumulated through materials science, matrix biology and tissue engineering. However, achieving clinical translation and commercial success requires regenerative biomaterials to be not only efficacious and safe but also cost-effective and convenient for use and production. Utilizing biomaterials of human origin as building blocks for therapeutic purposes has provided a facilitated approach that closely mimics the critical aspects of natural tissue with regard to its physical and chemical properties for the orchestration of wound healing and tissue regeneration. In addition to directly using tissue transfers and transplants for repair, new applications of human-derived biomaterials are now focusing on the use of naturally occurring biomacromolecules, decellularized ECM scaffolds and autologous preparations rich in growth factors/non-expanded stem cells to either target acceleration/magnification of the body's own repair capacity or use nature's paradigms to create new tissues for restoration. In particular, there is increasing interest in separating ECMs into simplified functional domains and/or biopolymeric assemblies so that these components/constituents can be discretely exploited and manipulated for the production of bioscaffolds and new biomimetic biomaterials. Here, following an overview of tissue auto-/allo-transplantation, we discuss the recent trends and advances as well as the challenges and future directions in the evolution and application of human-derived biomaterials for reconstructive surgery and tissue engineering. In particular, we focus on an exploration of the structural, mechanical, biochemical and biological information present in native human tissue for bioengineering applications and to provide inspiration for the design of future biomaterials.

Effect of poly (lactide-co-glycolide) (PLGA)-coated beta-tricalcium phosphate on the healing of rat calvarial bone defects: a comparative study with pure-phase beta-tricalcium phosphate

OBJECTIVES

To investigate the effect of poly (lactide-co-glycolide) (PLGA)-coated β-tricalcium phosphate (TCP) as a scaffold on bone regeneration in rat calvaria.

MATERIAL AND METHODS

Bilateral critical-sized defects were created in the calvaria of 20 Sprague Dawley rats. Defects of each rat were filled with pure-phase β-TCP or PLGA/β-TCP, or left as unfilled control. The healing was evaluated by micro-computed tomography, histological, and immunohistochemical analyses. Tartrate-resistant acid phosphatase (TRAP) staining was also performed to assess the resorption activity.

RESULTS

At 4 weeks, ingrowth of cells from the surrounding tissue into the β-TCP and PLGA/β-TCP biomaterials were observed in the defect area, and new bone formation had started. At 6 weeks, the value for defect closure in the β-TCP group was significantly greater than that in the unfilled control (P < 0.01). A significantly greater level of new bone formation was found in the β-TCP group (P < 0.01) and PLGA/β-TCP group (P < 0.05) than that in the control group, while no significant difference was found between the β-TCP and PLGA/β-TCP groups. At both time points, the height of new tissue/biomaterial in the central third of the defect was significantly increased when the β-TCP or PLGA/β-TCP was used. Proliferating cell nuclear antigen -positive cells were observed around and inside the β-TCP or PLGA/β-TCP, and TRAP-positive cells were found at the surface of the biomaterials, suggesting that remodeling was occurring.

CONCLUSION

The application of PLGA-coated β-TCP could promote bone regeneration to similar extent as the β-TCP biomaterial in this in vivo model.

Surgical treatment of aseptic forearm nonunion with plate and opposite bone graft strut. Autograft or allograft?

PURPOSE OF THE STUDY

Adequate treatment of forearm nonunion should achieve both biological stimulation of the bone and mechanical stability. The use of bone graft could enhance the healing of a nonunion providing osteogenic, osteoconductive and osteoinductive stimulation and an optimal stability of the fixation. We retrospectively reviewed two cohorts of patients affected by forearm nonunion and treated with plate and opposite bone graft to determine whether the use of autograft versus allograft differs in terms of (1) rate of healing of the nonunion and (2) time of healing.

MATERIALS AND METHODS

Thirty-four patients were treated for aseptic forearm nonunion with cortical graft strut with opposite plate and intercalary graft in case of segmental bone defect. In 20 patients an autograft harvest from the fibula (group A) and in 14 (group B) an allograft provided by the bone bank of our institution were used.

RESULTS

All the nonunions healed in a mean of four months in both groups, ranging from two to 12 months in group A and from three to ten months in group B. At the latest follow up forearm function and pain were satisfactory in both groups.

CONCLUSION

The use of plate and opposite bone graft demonstrated to be effective in promoting the healing of forearm nonunions, without significant differences in terms of rate and time of healing in the two groups. Considering the higher surgical time and the comorbidity of the donor site, if a bone bank is available, we suggest to use homologous cortical bone strut graft with opposite plate and screw fixation for the treatment of aseptic forearm nonunion rather than autograft.

Association of vitamin D3 with alveolar bone regeneration in dogs

Designed sockets prepared on the mandibles of nine Beagle dogs were divided into three groups: Calcitriol +Alloplast, Alloplast and Empty. Five of the nine dogs received Vit.D₃ and calcium supplement (Vit.D/Ca group), while the other four dogs without supplements were assigned to Non-Vit.D/Ca group. After 4 weeks, the extent of vertical ridge resorption (VRR), bone density (density), new bone formation (NBF) and implant stability quotient (ISQ) were measured. Following systemic Vit.D/Ca administration, the Empty subgroup showed significant differences from the Calcitriol + Alloplast subgroup on variants NBF/Density/VRR and the Alloplast subgroup on items NBF/Density/ISQ/VRR. Alternatively, the Calcitriol + Alloplast subgroup revealed higher values of NBF/Density/ISQ (P < 0.001) and a lower VRR value (P = 0.001) than the Alloplast subgroup. Although there were no significant differences in NBF (P = 0.349), density (P = 0.796), ISQ (P = 0.577) and VRR (0.979) comparisons on alloplast treatment between the Vit.D/Ca and Non-Vit.D/Ca groups, local application with Calcitriol + Alloplast demonstrated better NBF/Density/ISQ (P = 0.02 to <0.001) effects than which of Alloplast subgroups. Consequently, the results showed that both systemic and local vitamin D₃ treatment might accelerate bone regeneration in dogs. Within the using dose, systemic vitamin D₃ treatment displayed a superior stimulating effect than local vitamin D₃ application did.

Implant rehabilitation for atrophic maxilla: a review

A severely atrophied maxilla presents serious limitations for conventional implant placement. This presents challenge to the surgeon for implant placement in harmony with the planned prosthesis. Survey of various literatures using internet sources, manual searches, and common textbooks on dental implants shows, that a thorough knowledge of conventional augmentation procedures such as bone augmentation techniques, guided bone regeneration, alveolar distraction, maxillary sinus elevation techniques with or without grafting and contemporary techniques of implant placement provide effective long-term solutions in the management of the atrophic maxilla.

Clinical evaluation of guided tissue regeneration combined with autogenous bone or autogenous bone mixed with bioactive glass in intrabony defects

Conflicting data exist on the combined use of grafting materials and barrier membranes in comparison to guided tissue regeneration (GTR) with membrane alone. The aim of the present study was to compare the clinical outcomes of GTR with collagen membrane (CM) alone (control group) or CM combined with autogenous bone graft (test group 1) or autogenous bone mixed with bioactive glass (test group 2) in intrabony defects. A total of 32 intraosseous defects in 22 subjects were treated randomly. After 6 months, significant probing depth reduction, clinical attachment level gain (CAL) and defect resolution were observed in all groups with significantly greater improvements in the test groups. There was no significant difference between the two test groups in any parameter. Results of the present study suggest that autogenous bone can be mixed with bioactive glass if the amount of the harvested bone is not sufficient.

The influence of hyperbaric oxygen treatment on the healing of experimental defects filled with different bone graft substitutes

To assess potential effects of hyperbaric oxygen (HBOT) on artificial bone grafts, β - Tricalcium phosphate (β-TCP) and calcium phosphate coated bovine bone (CPCBB) substitutes were applied to standard bone defects in rat tibiae. The control defects were left empty. Half of the animals received 60 minutes of 2.4 atmosphere absolute (ATA) of HBOT. Rats were sacrificed at one, two and four weeks. Bone healing was assessed histologically and histomorphometrically using light microscopy. The periosteum over the bone defects was examined ultrastructurally. Cardiac blood was collected to determine the serum osteocalcin levels. The HBOT increased new bone formation in the unfilled controls and β-TCP groups and significantly decreased cartilage matrix and fibrous tissue formations in all groups. Active osteoblasts and highly organized collagen fibrils were prominent in the periosteum of β-TCP and control groups. Serum osteocalcin levels also increased with HBOT. The healing of defects filled with CPCBB was similar to the controls and it did not respond to HBOT. These findings suggested that the HBOT had beneficial effects on the healing of unfilled bone defects and those filled with β-TCP bone substitute but not with CPCBB, indicating a material-specific influence pattern of HBOT.

Periodontal tissue engineering and regeneration: current approaches and expanding opportunities

The management of periodontal tissue defects that result from periodontitis represents a medical and socioeconomic challenge. Concerted efforts have been and still are being made to accelerate and augment periodontal tissue and bone regeneration, including a range of regenerative surgical procedures, the development of a variety of grafting materials, and the use of recombinant growth factors. More recently, tissue-engineering strategies, including new cell- and/or matrix-based dimensions, are also being developed, analyzed, and employed for periodontal regenerative therapies. Tissue engineering in periodontology applies the principles of engineering and life sciences toward the development of biological techniques that can restore lost alveolar bone, periodontal ligament, and root cementum. It is based on an understanding of the role of periodontal formation and aims to grow new functional tissues rather than to build new replacements of periodontium. Although tissue engineering has merged to create more opportunities for predictable and optimal periodontal tissue regeneration, the technique and design for preclinical and clinical studies remain in their early stages. To date, the reconstruction of small- to moderate-sized periodontal bone defects using engineered cell-scaffold constructs is technically feasible, and some of the currently developed concepts may represent alternatives for certain ideal clinical scenarios. However, the predictable reconstruction of the normal structure and functionality of a tooth-supporting apparatus remains challenging. This review summarizes current regenerative procedures for periodontal healing and regeneration and explores their progress and difficulties in clinical practice, with particular emphasis placed upon current challenges and future possibilities associated with tissue-engineering strategies in periodontal regenerative medicine.

Effect of systemic parathyroid hormone (1-34) and a beta-tricalcium phosphate biomaterial on local bone formation in a critical-size rat calvarial defect model

OBJECTIVE

The objective of this study was to evaluate local bone formation following systemic administration of parathyroid hormone (1-34) (PTH), a surgically implanted synthetic beta-tricalcium phosphate (beta-TCP) bone biomaterial serving as a matrix to support new bone formation.

MATERIALS AND METHODS

Critical-size, 8 mm, calvarial through-and-through osteotomy defects were surgically created in 100 adult male Sprague-Dawley rats. The animals were randomized into five groups of 20 animals each to receive one of the following treatments: PTH (15 microg PTH/kg/day; subcutaneously), PTH/beta-TCP, beta-TCP, or particulate human demineralized freeze-dried bone (DFDB), and sham-surgery controls. Ten animals/group were euthanized at 4 and 8 weeks post-surgery for radiographic and histometric analysis.

RESULTS

The histometric analysis showed that systemic PTH significantly enhanced local bone formation, bone fill averaging (+/-SE) 32.2+/-4.0% compared with PTH/beta-TCP (15.7+/-2.4%), beta-TCP (12.5+/-2.3%), DFDB (14.5+/-2.3%), and sham-surgery control (10.0+/-1.5%) at 4 weeks (p<0.014). Systemic PTH showed significantly enhanced bone formation (41.5+/-4.0%) compared with PTH/beta-TCP (22.4+/-3.0%), beta-TCP (21.3+/-4.4%), and with the sham-surgery control (23.8+/-4.2%) at 8 weeks (p<0.025). The DFDB group showed significantly increased bone formation from 4 (14.5+/-2.3%) to 8 weeks (32.0+/-3.2%) (p<0.006). The PTH/beta-TCP and beta-TCP groups both showed limited biomaterials resorption. The radiographic analysis was not diagnostic to distinguish local bone formation from the radiopaque beta-TCP biomaterial.

CONCLUSIONS

Systemic administration of PTH significantly stimulates local bone formation. Bone formation was significantly limited by the beta-TCP biomaterial.