Separation of palladium and silver from E-waste leachate: effect of nitric acid concentration on adsorption to Thiol scavenger

A new tannin-based adsorbent synthesized for rapid and selective recovery of palladium and gold: Optimization using central composite design

A tannin-based adsorbent was synthesized by pomegranate peel tannin powder modified with ethylenediamine (PT-ED) for the rapid and selective recovery of palladium and gold. To characterize PT-ED, field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDS-Mapping), and Fourier transform infrared spectroscopy (FT-IR) were used. Central composite design (CCD) was used for optimization. The kinetic, isotherm, interference of coexisting metal ions, and thermodynamics were studied. The optimal conditions, including Au (III) concentration = 30 m g L - 1 , Pd (II) concentration = 30 m g L - 1 , adsorbent mass = 26 mg, pH = 2, and time = 26 min with the sorption percent more than 99 %, were anticipated for both metals using CCD. Freundlich model and pseudo-second-order expressed the isotherm and kinetic adsorption of the both metals. The inhomogeneity of the adsorbent surface and the multi-layer adsorption of gold and palladium ions on the PT-ED surface are depicted by the Freundlich model. The thermodynamic investigation showed that P d 2 + and A u 3 + ions adsorption via PT-ED was an endothermic, spontaneous, and feasible process. The maximum adsorption capacity of P d 2 + and A u 3 + ions on PT-ED was 261.189 m g g - 1 and 220.277 m g g - 1 , respectively. The probable adsorption mechanism of P d 2 + and A u 3 + ions can be ion exchange and chelation. PT-ED (26 mg) recovered gold and palladium rapidly from the co-existing metals in the printed circuit board (PCB) scrap, including Ca, Zn, Si, Cr, Pb, Ni, Cu, Ba, W, Co, Mn, and Mg with supreme selectivity toward gold and palladium. The results of this work suggest the use of PT-ED with high selectivity and efficiency to recover palladium and gold from secondary sources such as PCB scrap.

In-syringe low-density solvent dispersive liquid-liquid microextraction of Pd(II) from acidic solutions resulting from hydrometallurgical treatments and quantification by ICP-OES

An in-syringe low-density solvent dispersive liquid-liquid microextraction (IS-LDS-DLLME) is presented for the extraction of palladium from a highly acidic medium before its quantification by inductively coupled plasma optical emission spectroscopy. The extraction solvent was 1-undecanol, and benzil mono-(2-pyridyl) hydrazone was employed as a ligand. Here, no dispersive solvent is needed as the vortex disperses 1-undecanol in the aqueous sample solution. The experimental variables pH, concentration of the ligand, type and quantity of the extraction solvent, vortex time, and addition of NaCl were optimized. The described approach has detection and quantification limits of 0.13 and 0.43 μg L-1, respectively, an enrichment factor of 91, a linear analytical range from 0.4 to 250 μg L-1, and a precision of 1.7-2.0 % (25.0 μg L-1). The approach was used to analyze electronic waste samples and certified reference material.