Effects of strontium - erbium co-doping on the structural properties of hydroxyapatite: An Experimental and theoretical study

Novel PWO/ ZnO heterostructured nanocomposites: Synthesis, characterization, and photocatalytic performance

Photocatalytic degradation is becoming an increasingly attractive method for addressing environmental remediation challenges. In this work, the novel pure PWO/ZnO and doped PWO: Er/ZnO: Ag heterostructure nanocomposites with premier photocatalytic efficiency were synthesized via a simple co-precipitation method followed by a solvothermal procedure. X-ray diffraction (XRD), diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS), high-resolution transmission electron microscopy (HRTEM), energy dispersive X-ray (EDX), and ultraviolet-visible (UV-Vis) absorbance measurements techniques were employed to characterize the structural and optical properties. HRTEM images prove the possibility of intimate contact formation at the pure and doped PWO/ZnO heterostructure nanocomposite interfaces. The photocatalytic performance of the PWO/ZnO heterostructure nanocomposites in the degradation of the methylene blue (MB) and methyl orange (MO) dyes under UVA light was evaluated. The photocatalysts' ability in the mineralization of organic pollutants was confirmed by the TOC test. BET and zeta potential analyses were used to study the dye adsorption mechanisms. Additionally, adsorption isotherms and kinetics have been investigated to describe the adsorption of MB and MO into the samples. The degradation rates of MB with PWO/ZnO and PWO: Er/ZnO: Ag heterostructure nanocomposites were 4.7 and 6.6 times higher than those of PWO and PWO: Er nanoparticles. This rate for MO degradation is 5.2 and 3.5 times higher than that of pure PWO and PWO: Er nanoparticles, respectively. This study outlines an easy method to develop innovative, highly effective heterostructure nanocomposites capable of converting UVA light into photocatalytic performance.

Tetracalcium phosphate/polycaprolactone composite scaffold: Mechanical reinforcement, biodegradability regulation and bioactivity induction

Polycaprolactone (PCL) is considered a potential biomaterial due to its good biocompatibility, but its slow degradability and insufficient mechanical properties limit its wide application in bone tissue engineering. Tetracalcium phosphate's (TTCP) good degradability and inherent high stiffness are expected to compensate for the aforementioned defects of PCL and endow it with good biological activity. This goal of this study was to obtain bioactive PCL composite scaffolds with tuneable degradation properties and good mechanical strength via selective laser sintering technology (SLS). Composite porous scaffolds with TTCP contents of 0%, 5%, 10%, 15%, 20%, and 25% were prepared, and the experimental results showed that the addition of TTCP significantly improved the mechanical properties of the scaffold. Notably, the tensile strength of the composite scaffold with 20% TTCP content reached 15.2 MPa, which was 2.9 times that of pure PCL, and the best flexural strength was found in the scaffold with 15% TTCP content (4.7 MPa). More importantly, the introduced TTCP not only achieved the effective pH regulation of the soaking solution and the promotion of biodegradation, but also provided the scaffold with good bioactivity and biocompatibility.

Lanthanides-Substituted Hydroxyapatite for Biomedical Applications

Lately, there has been an increasing demand for materials that could improve tissue regenerative therapies and provide antimicrobial effects. Similarly, there is a growing need to develop or modify biomaterials for the diagnosis and treatment of different pathologies. In this scenario, hydroxyapatite (HAp) appears as a bioceramic with extended functionalities. Nevertheless, there are certain disadvantages related to the mechanical properties and lack of antimicrobial capacity. To circumvent them, the doping of HAp with a variety of cationic ions is emerging as a good alterative due to the different biological roles of each ion. Among many elements, lanthanides are understudied despite their great potential in the biomedical field. For this reason, the present review focuses on the biological benefits of lanthanides and how their incorporation into HAp can alter its morphology and physical properties. A comprehensive section of the applications of lanthanides-substituted HAp nanoparticles (HAp NPs) is presented to unveil the potential biomedical uses of these systems. Finally, the need to study the tolerable and non-toxic percentages of substitution with these elements is highlighted.

Effects of Yttrium Doping on Erbium-Based Hydroxyapatites: Theoretical and Experimental Study

This is the first investigation of yttrium (Y) and erbium (Er) co-doped hydroxyapatite (HAp) structures, conducted using theoretical and experimental procedures. By using a wet chemical method, the materials were synthesized by varying the concentration of Y amounts of 0.13, 0.26, 0.39, 0.52, 0.65, and 0.78 at.% every virtual 10 atoms of calcium, whereas Er was kept fixed at 0.39 at.%. Spectroscopic, thermal, and in vitro biocompatibility testing were performed on the generated samples. Theoretical calculations were carried out to compute the energy bandgap, density of states, and linear absorption coefficient. The effects of Y concentration on thermal, morphological, and structural parameters were investigated in detail. Raman and Infrared (FTIR) spectroscopies confirmed the formation of the HAp structure in the samples. Theoretical investigations indicated that the increasing amount of Y increased the density from 3.1724 g cm^-3 to 3.1824 g cm^-3 and decreased the bandgap energy from 4.196 eV to 4.156 eV, except for the sample containing 0.39 at. % of the dopant, which exhibited a decrease in the bandgap. The values of linear absorption appeared reduced with an increase in photon energy. The samples exhibited cell viability higher than 110%, which revealed excellent biocompatibility for biological applications of the prepared samples.

Ab Initio Study on Dopant Relaxation Mechanism in Ti and Ce Cationically Substituted in Wurtzite Gallium Nitride

The changes in properties of materials upon introduction of impurities is well documented but less is known about the location of foreign atoms in different hosts. This study is carried out with the motivation to explore dopant location in hexagonal GaN using density functional theory based calculations. The dopant site location of the individual dopants Ti, Ce, and Ti-Ce codoped wurtzite GaN was investigated by placing the dopants at cationic lattice sites as well as off-cationic sites along the c-axis. The geometry optimization relaxed individual dopants on cationic Ga sites but in the case of codoping Ce settled at site 7.8% away along [0001 ¯] and Ti adjusted itself at site 14% away along [0001] from regular cationic sites. The analysis of the results indicates that optimized geometry is sensitive to the starting position of the dopants. The magnetic exchange interactions between Ti and Ce ions are responsible for their structural relaxation in the matrix.

La3+ and F- dual-doped multifunctional hydroxyapatite nanoparticles: Synthesis and characterization

Hydroxyapatite (HA) co-doped with La³⁺ and F^- ions were synthesized by the precipitation method and sintered at 1,100°C for 1 hr. Samples were characterized by the standard experimental methods including the density, X-Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), and Scanning Electron Microscopy (SEM) to investigate their microstructure, phase formation, and bonding characteristics in detail. Moreover, the materials produced were identified using the microhardness tests. It was observed that in the most of materials, the hydroxyapatite was found to be the main phase with a minor amount of β-tricalcium phosphate (β-TCP). Furthermore, the presence of fluoride and small amount of β-TCP was verified with all the characteristic FTIR bands of hydroxyapatite for the majority of samples studied. The result in SEM evaluation is that the produced HA powders have less deformed, uniformly distributed, and regularly shaped particles. Here, the material density has changed towards a less dense state with the increasing rate of La doping, but statistically significant difference was not obtained (p, .1942 > .05) with increase of the F doping. A significant difference was obtained the microhardness values between La³⁺ and F^- ions co-doped HA materials and pure HA (p [.0053] < .05). Accordingly, this study confirmed that since the La³⁺ and F^- ions can potentially increase the efficacy of HA. According to the spectral, mechanical, and microstructure analysis result, this material can be as a good candidate product for use as an occluding material for dental application.