Potential of ionic liquids for VOC absorption and biodegradation in multiphase systems

Performance on adsorption of toluene by ionic liquid-modified AC in high-humidity exhaust gas

Volatile organic compounds (VOCs) frequently pose a threat to the biosphere, impacting ecosystems, flora, fauna, and the surrounding environment. Industrial emissions of VOCs often include the presence of water vapor, which, in turn, diminishes the adsorption capacity and efficacy of adsorbents. This occurs due to the competitive adsorption of water vapor, which competes with target pollutants for adsorption sites on the adsorbent material. In this study, hydrophobic activated carbons (BMIMPF6-AC (L), BMIMPF6-AC (g), and BMIMPF6-AC-H) were successfully prepared using 1-butyl-3-methylimidazolium hexafluorophosphate (BMIMPF6) to adsorb toluene under humidity environment. The adsorption performance and mechanism of the resulting ionic liquid-modified activated carbon for toluene in a high-humidity environment were evaluated to explore the potential application of ionic liquids as hydrophobic modifiers. The results indicated that BMIMPF6-AC-H exhibited superior hydrophobicity. The toluene adsorption capacity of BMIMPF6-AC-H was 1.53 times higher than that of original activated carbon, while the adsorption capacity for water vapor was only 37.30% of it at 27 °C and 77% RH. The Y-N model well-fitted the dynamic adsorption experiments. To elucidate the microscopic mechanism of hydrophobic modification, the Independent Gradient Model (IGM) method was employed to characterize the intermolecular interactions between BMIMPF6 and toluene. Overall, this study introduces a new modifier for hydrophobic modification of activated carbon, which could enhance the efficiency of activated carbon in treating industrial VOCs.

Catalytic degradation of benzene at room temperature over FeN4O2 sites embedded in porous carbon

Benzene and its aromatic derivatives are typical volatile organic compounds for indoor and outdoor air pollution, harmful to human health and the environment. It has been considered extremely difficult to break down benzene rings at ambient conditions without external energy input, due to the extraordinary stability of the aromatic structure. Here, we show one such solution that can thoroughly degrade benzene to basically water and carbon dioxide at 25 °C in air using atomically dispersed Fe in N-doped porous carbon, with almost 100% benzene conversion. Further experimental studies combined with molecular simulations reveal the mechanism of this catalytic reaction. Hydroxyl radicals (·OH) evolved on the atomically dispersed FeN4O2 catalytic centers were found responsible for initiating and completing the oxidation of benzene. This work provides a new chemistry to degrade aromatics at ambient conditions and also a pathway to generate active ·OH oxidant for generic remediation of organic pollutants.

Condensable Gases Capture with Ionic Liquids

Condensable gases are the sum of condensable and volatile steam or organic compounds, including water vapor, which are discharged into the atmosphere in gaseous form at atmospheric pressure and room temperature. Condensable toxic and harmful gases emitted from petrochemical, chemical, packaging and printing, industrial coatings, and mineral mining activities seriously pollute the atmospheric environment and endanger human health. Meanwhile, these gases are necessary chemical raw materials; therefore, developing green and efficient capture technology is significant for efficiently utilizing condensed gas resources. To overcome the problems of pollution and corrosion existing in traditional organic solvent and alkali absorption methods, ionic liquids (ILs), known as "liquid molecular sieves", have received unprecedented attention thanks to their excellent separation and regeneration performance and have gradually become green solvents used by scholars to replace traditional absorbents. This work reviews the research progress of ILs in separating condensate gas. As the basis of chemical engineering, this review first provides a detailed discussion of the origin of predictive molecular thermodynamics and its broad application in theory and industry. Afterward, this review focuses on the latest research results of ILs in the capture of several important typical condensable gases, including water vapor, aromatic VOCs (i.e., BTEX), chlorinated VOC, fluorinated refrigerant gas, low-carbon alcohols, ketones, ethers, ester vapors, etc. Using pure IL, mixed ILs, and IL + organic solvent mixtures as absorbents also briefly expanded the related reports of porous materials loaded with an IL as adsorbents. Finally, future development and research directions in this exciting field are remarked.

Review of Emission Characteristics and Purification Methods of Volatile Organic Compounds (VOCs) in Cooking Oil Fume

Volatile organic compounds (VOCs) in cooking oil fumes need to be efficiently removed due to the significant damage they cause to the environment and human health. This review discusses the emission characteristics, which are influenced by different cooking temperatures, cooking oils, and cuisines. Then, various cooking oil fume purification methods are mainly classified into physical capture, chemical decomposition, and combination methods. VOCs removal rate, system operability, secondary pollution, application area, and cost are compared. The catalytic combustion method was found to have the advantages of high VOC removal efficiency, environmental protection, and low cost. Therefore, the last part of this review focuses on the research progress of the catalytic combustion method and summarizes its mechanisms and catalysts. The Marse-van Krevelen (MVK), Langmuir-Hinshelwood (L-H), and Eley-Rideal (E-R) mechanisms are analyzed. Noble metal and non-noble metal catalysts are commonly used. The former showed excellent activity at low temperatures due to its strong adsorption and electron transfer abilities, but the high price limits its application. The transition metals primarily comprise the latter, including single metal and composite metal catalysts. Compared to single metal catalysts, the interaction between metals in composite metal catalysts can further enhance the catalytic performance.

Preparation and physicochemical characterization of deep eutectic solvents and ionic liquids for the potential absorption and biodegradation of styrene vapors

Styrene emissions can be treated by physicochemical, biological, or physicochemical/biological means. Due to its low solubility in water an alternative to eliminate styrene emissions from air is the use of two-phase partitioning bioreactors (TPPBs) which comprised a hydrophobic non-aqueous phase (NAP) which can improve mass transfer of styrene. This study was devoted to prepare and evaluate the main physicochemical characteristics of novel NAPs such as Ionic liquids (ILs), Deep Eutectic Solvents (DESs) and Natural Deep Eutectic Solvents (NADEs) as well as their toxicity and biodegradability to treat styrene vapors. Absorption experiments of styrene showed that the best NAPs were the DESs formed with Tetrabutylammonium bromide and decanoic acid and the ILs [C₆mim][FAP], [C₄mim] [NTf₂] and [C₄mim] [PF₆], since they presented a styrene partition coefficient between 0.0015 and 0.0041. Finally, the IL [C₆mim][FAP] was used as a NAP in a TPPB batch process given its high styrene affinity, low solubility in water and non-biodegradability; styrene mineralization was three times higher in the TPPB compared with the control. ILs are potential adjuvant phases in biological degradation systems, as well as other solvents like DESs and NADESs.

Super enhancement of methanethiol biodegradation by new isolated Pseudomonas sp. coupling silicone particles

A new strain, Pseudomonas sp. SJ-1, which was able to remove model odorous organics methanethiol (MT) has been isolated from the wastewater treatment plant and identified via 16S rRNA analysis. Initial MT concentration, temperature and pH played an important role in MT removal, and up to 100% of 260 mg L^-1 of MT could be removed within 11 h under the optimum conditions (30 °C, pH 7.0) with an average degradation rate of 23.6 mg L^-1 h^-1, which was the highest one in literature so far. The silicone particles were added as the non-aqueous phases (NAP) to enhance the performance of MT degradation. The results indicated that the maximum degradation rate and specific cell growth of strain SJ-1 were 2.36 times and 1.31 times by Haldane kinetic model analysis in the NAP added test. The SO₄^2- was identified as the major intermediate and CO₂ as a final product in MT biodegradation. Overall, this is the first report that a newly isolated Pseudomonas sp. could use high concentration MT as sole energy source and carbon source and its activity could be enhanced by adding NAP. The results provide a suggestion for the development of more effective and reliable biological treatment processes.

Recent Advances of Chlorinated Volatile Organic Compounds' Oxidation Catalyzed by Multiple Catalysts: Reasonable Adjustment of Acidity and Redox Properties

The severe hazard of chlorinated volatile organic compounds (CVOCs) to human health and the natural environment makes their abatement technology a key topic of global environmental research. Due to the existence of Cl, the byproducts of CVOCs in the catalytic combustion process are complex and toxic, and the possible generation of dioxin becomes a potential risk to the environment. Well-qualified CVOC catalysts should process favorable low-temperature catalytic oxidation ability, excellent selectivity, and good resistance to poisoning, which are governed by the reasonable adjustment of acidity and redox properties. This review overviews the application of different types of multicomponent catalysts, that is, supported noble metal catalysts, transition metal oxide/zeolite catalysts, composite transition metal oxide catalysts, and acid-modified catalysts, for CVOC degradation from the perspective of balance between acidity and redox properties. This review also highlights the synergistic degradation of CVOCs and NO_x from the perspective of acidity and redox properties. We expect this work to inspire and guide researchers from both the academic and industrial communities and help pave the way for breakthroughs in fundamental research and industrial applications in this field.

Absorption of Volatile Organic Compounds Toluene and Acetaldehyde in Choline Chloride-Based Deep Eutectic Solvents

Unrestricted emission of volatile organic compounds (VOCs)─a threat to human health and the environment─can be controlled to a large extent by the capturing mechanism. Few recent experimental studies explored the efficacy of the deep eutectic solvent (DES), a designer solvent with some fascinating properties, as a VOC-capturing medium. Through the partition coefficient measurement, it was found that the choline chloride-based DESs exhibit excellent VOC-capturing potencies. However, a molecular picture of the above absorption process is still lacking. Here, we study the molecular mechanism of the absorption of two commonly occurring VOCs, toluene and acetaldehyde, in two different choline chloride-based DESs with varying donor molecules, urea, and levulinic acid via the molecular dynamics simulation technique. Strong absorption of the VOCs is observed in both the DESs. The free energy profile for the absorption process has been explored using the umbrella sampling method. The VOCs are preferentially solvated near the liquid/vapor interface. The simulated partition coefficients for the VOCs from the vapor to the liquid phase show good agreement with the experimental results. Detailed analyses of the spatial and orientational structure of the VOCs and different components of DESs are performed to elucidate the interaction among them. The above analyses have indicated that DES is a better VOC-capturing medium compared to a room-temperature ionic liquid, which is more extensively studied in the literature.

Hydrophobic deep eutectic solvents as green absorbents for hydrophilic VOC elimination

As a common hydrophilic volatile organic compound (VOC), acetone is known to harm human health and the atmospheric environment. Absorption is a typical technique applied to capture hydrophilic VOCs; however, the difficulty of separating and recovering absorbed hydrophilic VOCs (e.g., acetone) from aqueous absorbents has become one of the major challenges in practical applications. Hydrophobic deep eutectic solvents (DESs) have therefore been developed as novel green absorbents for capturing hydrophilic VOCs in the present work. The compiled results show that efficient hydrophilic VOC elimination can be accomplished by the proposed hydrophobic DESs through high absorption capacity and thermodynamically favorable gas-to-liquid mass transfer. Among the explored DESs, the hydrophobic DES containing thymol [Thy] and decanoic acid [DecA] with a molar ratio of 1:1 has achieved the highest absorption capacity of acetone, i.e., 6.57 mg acetone per g DES at 20 °C and 1480 ppm acetone. The oxygen of acetone interacts favorably with the hydrogen atom of [Thy] upon absorption, rendering hydrogen bonding interaction surpassing polarity as the key factor in attaining superior solubility of acetone in DESs. Moreover, the absorbed acetone can be easily removed from Thy-based DESs, realizing an effective hydrophilic VOC elimination process with economic and ecological benefits.

Cyclodextrin-based supramolecular low melting mixtures: efficient absorbents for volatile organic compounds abatement

Cyclodextrins (CDs) and deep eutectic solvents (DESs) are emerging absorbent materials for the removal of volatile organic compounds (VOCs). In this study, we have used combination of modified CDs and levulinic acid to form four DESs analogs, referred to as supramolecular low-melting mixtures (LMMs), to study their absorption characteristics towards five VOCs, namely acetaldehyde, butanone, dichloromethane, thiophene, and toluene. The supramolecular LMMs showed up to 250-fold reduction in the vapor-liquid partition coefficients compared to water. The overall absorption capacity found to be synergistic and seemed to be dictated by the hydrophobicity of the VOCs. Toluene and dichloromethane were absorbed at 99 and 95% by the supramolecular LMMs, respectively, even at higher concentrations, with a linear relationship between the concentration and absorption capacity. The LMMs also retained their absorption capacities even after five absorption/desorption cycles.

Highly efficient capture of odorous sulfur-based VOCs by ionic liquids

This study proposes the capture of dimethyl sulfide (DMS) and dimethyl disulfide (DMDS) from waste gas using an ionic liquid (IL), namely, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][Tf₂N]), and examines the process from a molecular level to the laboratory scale, which is then scaled up to the industrial level. The binding energy and weak interactions between DMS/DMDS and the anion/cation in [EMIM][Tf₂N] were investigated using quantum chemistry calculations to identify the capture mechanism at the molecular scale. A thermodynamic model (UNIFAC-Lei) was established by the vapor-liquid equilibrium data of the [EMIM][Tf₂N] + DMS/DMDS systems measured at the laboratory scale. The equilibrium and continuous absorption experiments were performed, and the results demonstrated that [EMIM][Tf₂N] exhibits a highly efficient capture performance at atmospheric conditions, particularly, absorption capacities (AC) for DMS and DMDS are 189.72 and 212.94 mg g^-1, respectively, and partial coefficients (PC) as more reasonable evaluation metrics for those are 0.509 × 10^-4 and 6.977 × 10^-4 mol kg^-1 Pa^-1, respectively, at the 100 % breakthrough. Finally, a mathematical model of the strict equilibrium stage was established for process simulations, and the absorption process was conceptually designed at the industrial scale, which could provide a decision-making basis for chemical engineers and designers.

Insights into efficient removal of gaseous p-xylene using cerium-doped ZnO nanoparticles through photocatalytic oxidation

Novel Ce-doped ZnO exhibited excellent photocatalytic activity for decomposing VOCs under VUV light.

Probing Liquid Interfaces with Room-Temperature Ionic Liquids Using the Excited-State Dynamics of a Cationic Dye

Interfaces with room-temperature ionic liquids (ILs) play key roles in many applications of these solvents, but our understanding of their properties is still limited. We investigate how the addition of ILs in the aqueous subphase affects the adsorption of the cationic dye malachite green at the dodecane/water interface using stationary and time-resolved surface second harmonic generation. We find that the interfacial concentration of malachite green depends crucially on the nature of both anionic and cationic constituents. This concentration reports on the overall charge of the interface, which itself depends on the relative interfacial affinity of the ions. Our results reveal that the addition of ILs to the aqueous subphase has similar effects to the addition of conventional salts. However, the IL cations have a significantly higher propensity to adsorb than small inorganic cations. Furthermore, the IL constituents show a synergistic effect, as the interfacial concentration of each of them also depends on the interfacial affinity of the other.

Catalytic oxidation of VOCs over Mn/TiO2/activated carbon under 185 nm VUV irradiation

Volatile organic compounds (VOCs) are regarded as the major contributors to air pollution, and should be strictly regulated. Photocatalytic oxidation (PCO) is of great interest for the removal of VOCs owing to its strong oxidation capability. However, its application is greatly limited by catalytic deactivation. Vacuum Ultraviolet (VUV) irradiation provides a novel way to improve the photocatalytic activity while much O₃ will be generated which may cause secondary pollution. In this study, a multi-functional catalyst of Mn/TiO₂/activated carbon (AC) was developed to eliminate and utilize O₃, as well as enhance catalytic oxidation of VOC degradation via ozone-assisted catalytic oxidation (OZCO). The results indicate that Mn modified TiO₂/AC (i.e. 0.1%Mn/20%TiO₂/AC) achieved a toluene removal efficiency of nearly 86% with 100% elimination rate of O₃. With the help of Mn/TiO₂/AC catalyst, O₃ was catalytically decomposed and transformed into active species of O (¹D) and OH, thus enhancing toluene removal. The combination of VUV irradiation with multi-functional catalyst provides a novel and efficient way for the degradation of VOCs.

Phytotoxicity of ionic liquids with different structures on wheat seedlings and evaluation of their toxicity attenuation at the presence of modified biochar by adsorption effect

The toxic effects of eight common ionic liquids (ILs) on wheat seedlings was evaluated with specific emphasis on the influence of concentration range, anion species and cation chain length of ILs. The growth of wheat seeds was significantly inhibited by ILs, especially under higher concentration, presence of the fluoride anion and the longer alkyl chain length of the cation. The modified biochar (PB-K-N) efficiently removed the ILs from aqueous solutions, the order of the adsorption capacities was as follows: [Bmim]OAc [Bmim]C₇H₅O₂ [Bmim]BF₄ [Bmim]Br, [Domim]Br [BPy]Br [Omim]Br [Bmim]Br [Emim]Br. Furthermore, the wheat growth of all ILs groups except [Bmim]BF₄ group in the presence of PB-K-N was also similar to that of the control groups, which clearly demonstrated that PB-K-N could decrease or alleviate toxicity of ILs toward wheat by adsorption effect. Therefore, the biochar application was effective in improving plant resistance to ILs stress by adsorption, to reduce the phytotoxicity of ILs and provide an alternative approach for the utilization of PB-K-N in ILs contaminated water and soils.

Elimination of ethanethiol released from municipal wastes by absorption sequencing electrochemical oxidation

As a typical municipal waste landfill gas, ethanethiol can become an air pollutant because of its low odor threshold concentration and toxicity to human beings. A hybrid process of absorption combined with electrochemical oxidation to degrade ethanethiol was investigated. The ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM]BF₄) was employed as an absorbent to capture ethanethiol from the air stream. Electrochemical oxidation demonstrated that ethanethiol could be oxidized on a β-PbO₂ anode modified with fluoride, while [BMIM]BF₄ was used as an electrolyte. After a reaction time of 90 min under a current density of 50 mA/cm², ethanethiol could be thoroughly destructed by the successive attack of hydroxyl radicals (·OH) electrogenerated on the surface of the β-PbO₂ anode, while the sulfur atoms in ethanethiol were ultimately converted to sulfate ions [Formula: see text]. The reaction mechanism is proposed, and the operating condition is also estimated with a kinetic model. This hybrid process could be a promising way to remove thiol compounds from municipal waste landfill gases.

Utilization of Ionic Liquids in Lignocellulose Biorefineries as Agents for Separation, Derivatization, Fractionation, or Pretreatment

Ionic liquids (ILs) can play multiple roles in lignocellulose biorefineries, including utilization as agents for the separation of selected compounds or as reaction media for processing lignocellulosic materials (LCM). Imidazolium-based ILs have been proposed for separating target components from LCM biorefinery streams, for example, the dehydration of ethanol-water mixtures or the extractive separation of biofuels (ethanol, butanol) or lactic acid from the respective fermentation broths. As in other industries, ILs are potentially suitable for removing volatile organic compounds or carbon dioxide from gaseous biorefinery effluents. On the other hand, cellulose dissolution in ILs allows homogeneous derivatization reactions to be carried out, opening new ways for product design or for improving the quality of the products. Imidazolium-based ILs are also suitable for processing native LCM, allowing the integral benefit of the feedstocks via separation of polysaccharides and lignin. Even strongly lignified materials can yield cellulose-enriched substrates highly susceptible to enzymatic hydrolysis upon ILs processing. Recent developments in enzymatic hydrolysis include the identification of ILs causing limited enzyme inhibition and the utilization of enzymes with improved performance in the presence of ILs.

Biodegradation of toluene in a two-phase partitioning bioreactor--impact of activated sludge acclimation

A two-phase partitioning bioreactor was considered to remove toluene contained in a biodegradable organic phase by activated sludge (AS). The selected solvent was hexadecane. In a first step, the biodegradation of toluene dissolved in hexadecane by AS was examined. In a second step, acclimation of the AS was carried out in order to improve the biodegradation rate. Acclimation improved toluene removal, since biodegradation yield increased from 72% to more than 91%. A total consumption was observed after only 4 days culture with acclimated AS, since the rest of the toluene corresponded to gas leak; while in the case of non-acclimated sludge, losses cannot account for all non-degraded toluene. Regarding hexadecane, acclimation also improved its degradation, from 43% to 79% after 6 days culture for non-acclimated and acclimated AS, respectively.

The solvation dynamics and rotational relaxation of protonated meso-tetrakis(4-sulfonatophenyl)porphyrin in imidazolium-based ionic liquids measured with a streak camera

For the steady-state behavior of diprotonated tetrakis(4-sulfonatophenyl)porphyrin (H4TPPS2-) in five imidazolium ionic liquids (ILs), the absorption positions of H4TPPS2- primarily depend on the constituent ions of the ILs whereas the emission positions of H4TPPS2- strongly depend on the polarity of the ILs. The fluorescence spectra of H4TPPS2- with different excitation wavelengths show no red-edge effect in our system. The dynamics of H4TPPS2- in ILs is further studied with a streak camera, and the relaxation process of ILs occurs on two different time scales. The short lived component attributed to the local motion of the cations and the anions around the porphine core varies from 32 to 196 ps. The long lived one originated from the collective diffusive motions of the cations and anions varies from 460 to 1072 ps. The average solvation time depends on the viscosity of the ILs. The rotational relaxation times of H4TPPS2- decrease as the viscosity of the ILs decreases.